I would like to thank you for the efforts you have made in this painting. I am hoping the same best work from you in the future as well. Thanks...
@MonsterHobbiesModelCarGarage
3 жыл бұрын
Thank you very much! Tune in next Sunday when I will be showing how to do a black wash in your chrome grilles and wheels. Have you used any of the techniques in this video before?
@theintake8961
7 ай бұрын
Very thorough tutorial! I really like the white wall trick. Nice shout out for Rick. Thank you 😎👍
@MonsterHobbiesModelCarGarage
7 ай бұрын
You are welcome. I do my best.
@c.d.scalemodels9198
3 жыл бұрын
Morning Trevor, Chris here.......your weather looks like mine......I'm here in N.E. Pennsylvania & we have just under 3 feet of snow here & it's been here for a month & it's not going anywhere either.......& it's been well under freezing here too.......AWFUL!!!!!!!!! Great videos & great tips as well........it's great 2 see these tips like these, so please.......continue more & I'll be tuning in!!!!!!!!
@MonsterHobbiesModelCarGarage
3 жыл бұрын
Thank you and I hope your weather improves. Have you tried this technique before? Next Sunday I will show you how to add a black wash to your grille and wheels. Hope you'll join us!
@algray1195
Жыл бұрын
I am always looking for ways to paint lettering on model tires. In my journey, I swear its the bane of my existence.
@MonsterHobbiesModelCarGarage
Жыл бұрын
i hear you! :D
@petermerz2704
3 жыл бұрын
I’ve seen the technique on hpiguys channel for sanding the tires. Painting, that’s a different story. Love the painting instructions. Never thought of making white walls that way! Keep up the good work!
@MonsterHobbiesModelCarGarage
3 жыл бұрын
Cool, thanks! Please let me know how it works for you!
@petesmodelcarcustoms584
3 жыл бұрын
What a good idea. I shall be studying this video. Thank you👍🤩Pete 😎
@MonsterHobbiesModelCarGarage
3 жыл бұрын
More lessons to come!
@THROTTLEPOWER
3 жыл бұрын
Nice video Trevor!
@MonsterHobbiesModelCarGarage
3 жыл бұрын
Glad you enjoyed it. have you used this technique before?
@THROTTLEPOWER
3 жыл бұрын
@@MonsterHobbiesModelCarGarage Yes
@bigcharliesmodelgarage296
3 жыл бұрын
Great tips Trevor. Thanks for sharing.
@MonsterHobbiesModelCarGarage
3 жыл бұрын
You bet! Have you ever tried this technique before?
@bigcharliesmodelgarage296
3 жыл бұрын
@@MonsterHobbiesModelCarGarage no sir
@leroybragdon3096
3 жыл бұрын
Great info
@MonsterHobbiesModelCarGarage
3 жыл бұрын
Glad it was helpful! Have you tried this technique before?
@bobschaar5720
3 жыл бұрын
Try using a Gelly Roll pen (available at Walmart) The "ink" is acrylic paint and you can get it in while. The roller ball tip comes in 3 different sizes and it will not flex when pressed against the tire as a paint brush might.
@MonsterHobbiesModelCarGarage
3 жыл бұрын
Sounds like a good idea. Have you tried it on a spinning tire before?
@bobschaar5720
3 жыл бұрын
@@MonsterHobbiesModelCarGarage I have not. Only for white letters so far. I would think, however, that the paint brush technique would work best for the wider white walled tires.
@MonsterHobbiesModelCarGarage
3 жыл бұрын
@@bobschaar5720 I have painted a few narrow tires with a brush using the "Spin" method. I just wondered if the pen would be hard to hold onto with a spinning tire. Wonder if I could experiment with a sharpie? I'll have to try that sometime.
@bobschaar5720
3 жыл бұрын
@@MonsterHobbiesModelCarGarage probably not if the tire is spinning slow (adjustable speed drill).
@MonsterHobbiesModelCarGarage
3 жыл бұрын
@@bobschaar5720 True. Must be a slow day if I didn't think about that! :D
@brianlewis6926
2 жыл бұрын
I use a unsmoked cigarette bud for putting white lettering on
@MonsterHobbiesModelCarGarage
2 жыл бұрын
That's an interesting technique. You should make a video on that as I never heard of anyone doing that before.
@brianlewis6926
2 жыл бұрын
@@MonsterHobbiesModelCarGarage literally dab it in white paint dab the extra off on a paper towel than dab on the raise letters
@MonsterHobbiesModelCarGarage
2 жыл бұрын
@@brianlewis6926 Sounds good.
@kevinlowe4845
2 жыл бұрын
Hey guy, have you paint chrome on resin wheels,love you channel
@MonsterHobbiesModelCarGarage
2 жыл бұрын
It can be done. use a black primer first.
@ThomasWRhoades
2 жыл бұрын
Great video, where can I purchase tires and rims for my 1:18 1966 mustang?
@MonsterHobbiesModelCarGarage
2 жыл бұрын
I wish I could help you with that, but I don't have any in that scale.
@RayWarChiefWilliams
Жыл бұрын
I find a paint pen from the dollar store. It is acrylic paint as well.
@MonsterHobbiesModelCarGarage
Жыл бұрын
Good work! I'm glad you liked my video too.
@D2Offline
2 жыл бұрын
Could use a socket adaptor and a 7/16 deep socket for more room and not have the tire pop off.
@MonsterHobbiesModelCarGarage
2 жыл бұрын
Sounds good. My Dad made me some cones that you push the tires down on, but they only fit in a drill press chuck. My drill press broke years ago.
Пікірлер: 42