Very useful. The 2 rulers with a clamp was a great tip as well!
@RoamingAdhocrat
4 жыл бұрын
bloody hell - using two rulers and a clamp to make a jig…! Why did I never think of that? Brilliant!
@wishborn2008
Жыл бұрын
Ein wunderbares Video, sehr angenehm erklärt, für mich als analogen Modellbahner ein wahres Lehrvideo. Für alte Hasen bestimmt nicht gedacht, denn die digitale Technik ist so umfassend geworden im Modellbahn und Modellbau Bereich, das man sie gar nimmer weg denken mag.
@christinetookey5637
Жыл бұрын
Such dedication to detail and your patience is fantastic 👏👏 well done x
@ronplucksstrings7112
5 жыл бұрын
What a great, simple technique for making really any kind of scale window...end result looks much better than the clunky plastic ones in the kits!
@johnkelley9877
5 жыл бұрын
This is a really useful method for making windows! I like to buy some things ready made but I still prefer to make as much as I can by scratch building. Thanks for sharing this neat tutorial.
@marklinofsweden
5 жыл бұрын
Thank you John! The good thing is the possibility to be able make any window. The downside is the hours of work required.
@Terranscapes
8 жыл бұрын
Nice simple method of banging out some great windows. :)
@marklinofsweden
8 жыл бұрын
+Terranscapes Thank you! 👍
@marklinofsweden
8 жыл бұрын
+Terranscapes Thank you! 👍
@marklinofsweden
8 жыл бұрын
+Terranscapes Thank you!
@jockellis
6 жыл бұрын
Great thing about homemade is that windows, stones, bricks, etc may be scaled to be used on any gauge RR.
@marklinofsweden
6 жыл бұрын
Jupp! 👍 That’s it. This method should work for N-scale (1:100) as well. I’m a bit uncertain about smaller scales though..
@davidhefner8853
2 жыл бұрын
I build wooden window frame. Then...on back side of window make very small cuts with X-acto knife. White thread pulled tight crisscrossing the window frame and tiny drop of Superglue. Hold until set. Lightly paint the threat with color of choice. The paint will glue the threads in place. Add plastic window material to the inside.
@andylancop
2 жыл бұрын
Very ingenious, well done.
@RalphPCvids
8 жыл бұрын
Very clever! I enjoy your presentations!
@xflow79
8 жыл бұрын
Hi Martin! As always, nice presented, very useful tips! greets from Austria
@marklinofsweden
8 жыл бұрын
+XFlow Thank you! :)
@mooregaminglounge5170
5 жыл бұрын
Thanks for the tutorial, easy to understand
@marklinofsweden
5 жыл бұрын
Thank you!
@michaelchartres
6 жыл бұрын
Fantastic idea and one which I shall try. Many thanks.
@marklinofsweden
6 жыл бұрын
Thank you Michael! Good to hear you liked the video and the way of making windows. I would think that windows will be more and more 3D-printed, as the access to printers among general people increases. I have made a few projects with 3D-printed windows. You still need a kind of too-pricy printer to get it right.. But as things looks, these things will get better both in performance and lower in cost. Wish you a nice weekend!
@alfredoisla1646
6 жыл бұрын
you have marvelous ideas ...
@marklinofsweden
6 жыл бұрын
Thank you Alfredo! 👍😊
@strafrag1
8 жыл бұрын
Excellent, Martin. Thanks.
@perth45
4 жыл бұрын
great video, thanks...
@gsgidney
7 жыл бұрын
Really great idea! !
@marklinofsweden
6 жыл бұрын
+Greg Gidney Thank you Greg! 👍😊
@briannorris
8 жыл бұрын
Great video but you might want to try using a cutting mat rather than cutting straight onto your desktop.
@marklinofsweden
8 жыл бұрын
:) It´s me... I´ll consider buying one. Thank you for the advise!
@alfredbarten4901
3 жыл бұрын
I love it. Thanks.
@waynehumber8906
2 жыл бұрын
Awesome!
@nitramretep
8 жыл бұрын
Good ideas, well presented, very informative.
@thomasroff5642
4 жыл бұрын
does standard white paint work instead as I don't have the funds for an airbrush as I'm only 13.thanks
@kargandarr
4 жыл бұрын
How do you build the structure with the tanks on it that are behind you in the beginning of this video? It is an interesting structure and I might want to create something similar for display purposes in the future.
@BearsTrains
8 жыл бұрын
Brilliant! Thank you
@williamwade641
8 жыл бұрын
Many thanks for sharing your brilliant ideas. I will give this method a go. Could one use a can of spray paint in the absence of an air brush?
@marklinofsweden
8 жыл бұрын
+William Wade Hi William! It´s hard to do with a can because the can gives soo much paint in the beam. Try spraying from a good distance, and it might work. Please comment in the thread again about how it Went.
@waynewagoner5521
6 жыл бұрын
Very nice tutorial, very helpful, thank you. Do you have any on how the make a scratch build commercial building, like a down town scene
@tenchu65
7 жыл бұрын
Do you have measurements of those buildings for DIY , or do you buy the kits of different buildings and remodel them yourself ?
@a4gr
7 жыл бұрын
Hello, I want to find out the best way to glue cut bits of frosted acrylic into 3mm foamcore window holes. Any good ideas to getting really clean results?
@marklinofsweden
7 жыл бұрын
+Glen Charles Rowell Woodglue.. very thin layer. 👍
@a4gr
7 жыл бұрын
Thanks for the reply Marklin. I have a few pictures of models I made if you wanna have a look sometime: a4jp.com/services-list/gallery-handmade-models/
@mahlanguism
8 жыл бұрын
I love this guy
@marklinofsweden
8 жыл бұрын
+john ”Suzie” preston Love U too John! :)
@leticiacordoba8099
6 жыл бұрын
excelente...
@vincentvalle783
7 жыл бұрын
Wow!
@scrooem
8 жыл бұрын
cool
@gemmauxue
Жыл бұрын
Hello, i would like to see this video in spanish. Thanks
@diedertspijkerboer
4 жыл бұрын
An essential vid to watch. Unless you only want to model bomb shelters.
Пікірлер: 52