Happy Friday Everyone! Let me know what you think about today's deck modeling video!
@Time2Wonder70
5 жыл бұрын
Good video Justin, your deck framing should run the opposite way to your deck boards! 🖒
@glideking
5 жыл бұрын
I like that your video is about alternate sketchup methods. Does not matter what proper building or codes are.
@Thesketchupessentials
5 жыл бұрын
Thanks very much for this comment - never said I was a deck builder, but hopefully for all the deck builders out there, this makes modeling their decks easier :)
@cesarportillo8378
3 жыл бұрын
I'm currently studying Architecture, heading to my second year. Was stuck in a project and your video really helped a lot!!! Thanks!!
@adhiteshprasad1959
Жыл бұрын
I have math exam coming up in 3days...but here i am...watching your SketchUp tutorials... Your videos are amazing 👍 too amazing to get me hooked in exam season 😅.
@jeffbrown6243
3 жыл бұрын
I like the way you organize the final components (steps, railings, spindles) first. Then building the support structure. That is opposite the way things are built, but the best way to design. Thanks for the insight!
@wallsharkconstruction3819
3 ай бұрын
So helpful
@danielrosic2960
Жыл бұрын
You ran your joists the wrong direction 😅 Also, the standard is 16 inches on center (not 12), but because of the way you ran your joists, you’d need an entire joists for each piece of decking to prevent people from falling through the deck. Finally, 2x8 is okay, but generally decks are both framed and decked with 2x6. Great video!
@anthonyrandazzo8836
Жыл бұрын
12” centers are standard for vinyl and other non-wooden deck material. As far as framing members, you should check a framing table to see the size of dimensional lumber you need. It depends on spans and loads and other variables.
@markvallarino2847
5 жыл бұрын
Nice video. What I really like is it combines many of the features that sketchup has and you show how to leverage them to build more efficiently
@earlkendall146
5 жыл бұрын
You're a great instructor. Thanks for all of these.
@Thesketchupessentials
5 жыл бұрын
Thanks! Glad you liked it!
@MattGalles
3 жыл бұрын
Not even close to decking code :D but dude thank you for the great video, helped out a lot.
@felmartt
4 жыл бұрын
Great stuff! Liked the way how you use the move/copy with the spacers evenly, I didn't know about that. Thanks!
@Thesketchupessentials
4 жыл бұрын
Happy to help!
@MrEverth007
2 жыл бұрын
Super smart and very detailed.
@jakhan3067
5 жыл бұрын
Another Great Video... mucho gras! Stringers underneath should run per. to floor boards.
@peterdubay3073
2 жыл бұрын
You are one of the best sketchup instrustors out there. (but not a carpenter for sure) haha but thats ok! floor joists blah, blah blah! but actually the bottom posts are full height through the decking to your railing top plate. create one side then rotate/copy etc....Great stuff!!
@dustins175
3 жыл бұрын
I love your videos Justin, so far they are the best ones I have seen yet, especially for a beginner like myself.
@Thesketchupessentials
3 жыл бұрын
Glad you like them!
@mlealch06
2 жыл бұрын
Awesome tutorial! great job dude!
@PaulStoker-tz2fz
Ай бұрын
Hey cool vid, i have a question I couldm't find the answer for, if I have an angled decking in mind but I can't find an optimal way to cut out across multiple lengths of the decking boards. Currently using Sketchup Free and the cuts are just groups. Can you help?
@gavinpeladeau6406
3 жыл бұрын
new to sketch up. this video showed me everything i need to know. great video :)
@rachelre1
3 жыл бұрын
Very good video. Thank you very much. Question is on the next stage - how to put material, so that it looks different for each wood plankt. Is there any video for this?
@DownwiththeTowerexJW
5 жыл бұрын
I love your videos. Very informative
@Thesketchupessentials
5 жыл бұрын
Thanks very much!
@Dimi_29
5 жыл бұрын
Great Video Justin!! Can you please make a video tutorial on how to properly prepare models for 3d printing?? Cause these have to be "waterproof" without any holes and it takes pretty long time to fix something with the conventional methods when there are mistakes and errors. Thank you a lot, Greetings from Copenhagen!! :)
@AmirDes
5 жыл бұрын
Cheers justin very good tutorial like always ..👍👍
@Thesketchupessentials
5 жыл бұрын
Thank you!
@ararmstrongaltrien5198
5 жыл бұрын
Great teaching....✌️✌️✌️
@Thesketchupessentials
5 жыл бұрын
Thanks!
@almaftbl35
2 жыл бұрын
Are all of the features in this video available from the free version?
@TheTabwinner
Ай бұрын
Joist run perpendicular to the decking. Not parallel
@daveedwardsconsulting6916
5 жыл бұрын
For decking boards, I would always fillet the edges. They render much more like boards and not extruded metal.
@Thesketchupessentials
5 жыл бұрын
Wouldn't be too hard using roundcorner/fredocorner since they're all components - good comment :)
@a.va.kgaming1809
3 жыл бұрын
Hi sir..how do you set up your sketchup setting sir.?
@erichurst2496
2 жыл бұрын
How would I design a deck in Sketchup using a photograph of my existing house?
@jnjfa05
4 жыл бұрын
How can I design a porch using my current house model?
@orlandorojas439
4 жыл бұрын
The floor joists need to run perpendicular to your deck boards.
@Thesketchupessentials
4 жыл бұрын
Sigh...did you read any of the other comments?
@Chris-xo2rq
2 жыл бұрын
Who uses 2-by lumber for decking? 5/4" is all that I've ever seen in the US. 2x8's for the frame of course... but not the decking.
@Thesketchupessentials
2 жыл бұрын
Luckily you should be able to model ANY size wood for your decking with the methods in this video 😎
@creativesuit1930
5 жыл бұрын
Dude you can't run your deck boards the same direction is your joists ... awesome video though I've been trying to find a good video that talks about how to build a deck in SketchUp and this is by far the best one.
@Thesketchupessentials
5 жыл бұрын
LOL - you and everyone else that watched this video told me that 😂 Glad you still found it helpful!
@harveydodd8803
2 жыл бұрын
Does this software allow you to design a free standing deck for an above ground pool? All the free ones I’ve found online have been pretty awful.
@Thesketchupessentials
2 жыл бұрын
Really whatever you want and can draw
@4STEVEJOY34
5 жыл бұрын
Please help me Justin. Is there a free plugin for Make 2017 that will take a JPG or PDF and make it explode-able to push/pull. Just want to pull up a gear to 3D print, from a picture. Been looking now for 5 Hr. I could have drawn it.
@Thesketchupessentials
5 жыл бұрын
Something other than importing the image and tracing it to create the shape? I'm not really aware of anything quite like that - I think I saw a paid TIF to SKP program somewhere, but I can't remember much about it
@customizedtrainingservices2079
3 жыл бұрын
You ran the joists un trong direction
@jackwalker5581
4 жыл бұрын
Good video quality. You need to check a few framing techniques and some dimensions. Lumber is general *5/8 not a quarter or half (e.g. a 2x8 is actually 7 5/8" x 1 5/8") Also, the Decking runs perpendicular to the Joists or they would have no support. What you were calling the Joist originally was Facia which can clean up the edges of the decking and joists very will. NOTE: you might try raising the Facia level with the Decking. Good luck.
@Thesketchupessentials
4 жыл бұрын
Sigh...probably 50% of the comments below talk about the way the framing is going as well...the intention of the video is to show you how to use the 3D software to model whatever you'd like - I would hope that anyone looking to actually BUILD a deck is going to a much more knowledgeable source
@tjkoerber
3 жыл бұрын
Jack, contractor here. You’re actually totally incorrect about your lumber sizing. After a 2x4 (1.5x3.5) and 2x6 (1.5”x5.5”) they move to 1/4” dimensions as correctly noted in the video. 2x8, (1.5x7.25), 2x10 (1.5x9.25), and 2x12 (1.5x11.25). And what you’re referring to as facia is actually a band. Facia is the trim around the roof. The deck band is the exterior of the deck banding that you see. It’s usually also a structural element of the deck framing. You have your terms and sizing all mixed up.
@daviddorge1559
4 жыл бұрын
It would take you probably five minutes to me doing this for about five weeks how many boards I need for a 12 foot wide 10 foot deep deck with the deck boards at 45° angle to the joists help me help me help me please
@Thesketchupessentials
4 жыл бұрын
I don't understand what you're asking exactly, but probably you'd model your boards, then draw a plane at the angle that you'd like to cut then and intersect it with your boards, then erase out the extra geometry
@YoungBloodWASP
Жыл бұрын
I do like this and your other videos. However, So Glad you’re getting beat up on your construction techniques. I get a feared if you don’t know simple framing, what else is screwy? 😉 Just bustn’ your Ass 😅 On a serious not, related, repeating studs with joists attached, How to create a group or component with 2 separate members that are attached perpendicular at their ends, and then lengths adjustable?
@jokerlilo
5 жыл бұрын
👍
@Thesketchupessentials
5 жыл бұрын
👍
@rashedhossain9099
5 жыл бұрын
if you upload excercise file that will be helpful
@Thesketchupessentials
5 жыл бұрын
I upload my exercise files on Patreon for all $3 and more/month supporters - thanks
@CockyMike911
5 жыл бұрын
I know this is a modeling video and not a "How to build a deck" video but .... lol. Remind me not to ever hire you to build my deck. There is SO much wrong here.
@Thesketchupessentials
5 жыл бұрын
Hmmm...my response to this would have been your first sentence ;p - since we're on the same page, I promise never to build a deck for you - you couldn't afford the costs I'd have to build in for re-work anyway 😂
@CockyMike911
5 жыл бұрын
@@Thesketchupessentials But just for the record. I really like your videos and refer to them often... just overlook my smartazz comment about your deck building abilities. (insert smiley face emoji)
@HappyHippyHome
3 жыл бұрын
Блять, ничего общего со строительством. Технологии ноль, но сука красиво
@johnlecorchick2039
5 жыл бұрын
obviously you are a genius, BUT, why in the hell are you running framing the same direction as decking? I'm guessing you are more of an IT guy, as opposed to a structural engineer.
@Thesketchupessentials
5 жыл бұрын
RobesPiBear As half the other comments on this post have already stated, thanks. Hopefully the video gives enough instruction that you can model your deck however you’d like
@diggiemalo2122
4 жыл бұрын
i hate to be a debbie-downer but your cant run the joists and the decking the same way...... just saying
@Thesketchupessentials
4 жыл бұрын
Yes...several people in the comments have pointed this out. Feel free to NOT build your deck this way 😎
@diggiemalo2122
4 жыл бұрын
@@Thesketchupessentials hahaha will do. good sense of humor you have.... youre gonna make it, keep up the good work.
@larrybelk1136
5 жыл бұрын
Before making a video of how to build a deck you need to know how. Your joist are the wrong way.
@Thesketchupessentials
5 жыл бұрын
If only these were principles of modeling videos teaching modeling principles that could be applied to ANY kind of framing. You are correct though - if you're trying to build a deck, you've probably come to the wrong channel for information😎
@goldlinemedia967
11 ай бұрын
Cool but you don’t know anything about building decks 😂😂😂😂
@Thesketchupessentials
11 ай бұрын
But now YOU know about SketchUp and can draw your deck however you need to :)
Пікірлер: 76