You didn't have to untie the knot to put more tension on the spring, but you seem to be comfortable with your way. Good job buddy 👍
@waynestefinashen239
8 ай бұрын
Yep even had the slot to install the rope eh
@pattayperformance
6 ай бұрын
I'm a terrible creature of habit. I do the way I'm taught and works. Its very hard for me to break cycle to be honest.
@pattayperformance
6 ай бұрын
That slot is popular on Stihl...I just can't break this habit.
@waynestefinashen239
8 ай бұрын
Love to watch you struggle in the cold at least a car shed and heater would make a big difference. Next time spray lube the dawg spring area and the main spring while it is apart to prolong the life of the recoil starter. I would rather replace one than have to install a new spring which sometimes are not sold separately.
@mr1pearl
8 ай бұрын
Hey I always wing it its a bad habit but sometimes it pays ! Seasoned hands I've not heard that before mine are old cracked and smell of farts 😂
@robertmailhos8159
8 ай бұрын
That is a crying shame that this hydro drive snow blower is mistreated by the new owner I'm going to look up the m.s.r.p on this machine Pattay
@pattayperformance
6 ай бұрын
has ot be close to 2g's or more
@robertmailhos8159
6 ай бұрын
@@pattayperformance okay thanks for the info on the price for this hydro drive snow blower Pattay 👍
@jonathanfierberg3807
8 ай бұрын
It’s not worthy of royal purple Rex
@pattayperformance
6 ай бұрын
if you are worth RP..so is the machine ; )
@skiprope536
8 ай бұрын
Snow Blowers should not rust like that PERIOD. Snow , rain, humidity ranges, temp variations. Like a wet suit that leaks. Major problem you missed on why the pull cord broke…the EYELIT on the recoil housing that the handle sits in is RUSTED corroded and sharp edges. You fixed nothing unless you sanded it down and hit it with lithium grease. You are welcome. In closing you must love to hear yourself talk. I bet your wife wears ear plugs.
@waynestefinashen239
8 ай бұрын
Wow but it is fixed and works for now anyways so easy on the ole boy eh
@skiprope536
8 ай бұрын
@@waynestefinashen239 if he wasn’t standing on that curb he wouldn’t be able to see over the handle bars. These blowers should come with check your height before you can blow stick.
@pattayperformance
6 ай бұрын
my wife prefers the 2-8 Treatment. The repair is fine...he had a great snow removal season!
@pattayperformance
6 ай бұрын
you have to remember...haters pay the bills. If you want a good laugh with Jake check out this guys channel
@thomasandrews9212
8 ай бұрын
Hi Jason I have a question my MTD 10hp 24in I redid the exhaust valve I have very low power it doesn't idle and hard to start some times ?
@waynestefinashen239
7 ай бұрын
Would need more information to help you out with this one buddy but normally if the engine is not responding to the throttle movement it may simply need lubrication on the throttle control. If it is winding out at too high an rpm the governor may need resetting also or the screw on the throttle control that adjusts the rpm may need to be unscrewed. At EP we recently had one winding out and would not throttle down but appears others had fooled with the machine and bent the metal arm on the throttle plate that the linkage hooks to and it needed to be bent back in to resolve the issue. Hope this helps buddy.
@thomasandrews9212
7 ай бұрын
@@waynestefinashen239 I adjust the screw on the throttle plate I have full power now it idle ok
@waynestefinashen239
7 ай бұрын
@@thomasandrews9212 Glad you got that figured out but when i noticed you got no reply from Jason i thought i would try to help you out.
Пікірлер: 20