It cant be stressed enough - you are the man. The competence of your videos is unmatched.
@scottgamron351
6 жыл бұрын
Thanks Robot - I really appreciate the way you explain things - just enough explanation and very thorough. Thank you again for taking the time to put these instructional vids together!
@d.f.9064
Жыл бұрын
I used to think crash bars were cool. This bike changed my mind.
@giorgiolupinacci7301
3 жыл бұрын
Your channel has been one of the reasons I went back to owning a Vespa 250 GTS..thanks!
@VespaMotorsport
3 жыл бұрын
Wow, that's awesome! Thanks for the support!
@billhughes5736
6 жыл бұрын
Thanks for another great video. I've viewed your earlier brake fluid change videos many times before, but this one gives me more confidence to finally give it a go. Keep up the good work with your videos. Bill Hughes, thousand oaks, CA
@SonoranSunriders
6 жыл бұрын
Thank you for the excellent video!
@tkiblawi1
4 жыл бұрын
Nice and clear as usual
@davidpost6902
4 жыл бұрын
Many thanks Robot, that's given me More confidence to do the job. Best wishes from Chelmsford Essex UK
@VespaMotorsport
4 жыл бұрын
You can do it!
@VespaPortland
6 жыл бұрын
Timbers! Love you man!
@RPWaggel
6 жыл бұрын
Cheers robot !!!! From a german shwabian 1.54 am
@jthaneyphotographer
6 жыл бұрын
A typical Robot video, excellent!!
@JulianJohnstone
5 жыл бұрын
Please make an X10 brake flush video, i cant get my right side front caliper to show any fluid in my Mityvac
@alexitosonixx8737
2 жыл бұрын
Thank you Robot great video it encourage me to do it but I don´t trust myself yet I will watch your video several times .. lol
@VespaMotorsport
2 жыл бұрын
You can do it!
@ljericevic
3 жыл бұрын
Hi. Can you please tell me is it the same procedure for bleeding the Gts with ABS system?
@patpatoo
6 жыл бұрын
cheers robot!!!!!!! from Sweden 1.14 am
@RPWaggel
6 жыл бұрын
@ivantxugs596
3 жыл бұрын
which would be the procedure for the change in the scooter with ABS?
@dayla8634
2 жыл бұрын
I want to rebuild my master cylinder on my px. Your method seems the way to go since you empty the reservoir, but heard that you should not do it that way so you don't get air into the system. I haven't looked into the reservoir yet, but can I empty it enough so that I still have fluid over the holes and rebuild the piston?
@robahler4127
4 жыл бұрын
Hey Robot - I think I have air in my ABS system on my brand new 300 GTS super? I've strapped the brakes and it works ok for about a day. What are the special tools needed to fix my mushy brakes?
@insentiv
4 жыл бұрын
how tight should I screw the reservoir cover?
@kuman6736
4 жыл бұрын
Did you ever do any kind of service on Bev Cruiser?
@Murat1982turkey
Жыл бұрын
I can do this. But I'm afraid. Any problems with the brakes? Is it right to always have a master do it? But it is very easy and I am resourceful. But it doesn't require much skill. How little oil do I need to add oil? Thank you
@superdream3277
6 жыл бұрын
Wurth brake cleaner?
@NoFrictionZone
3 жыл бұрын
Portland Timbers!!! ?? YNWA! Follow the Premier?
@mervynp8714
4 жыл бұрын
My gts lost the rubber cap of the rear caliper. Would it later cause any damage to the caliper? Thank you.
@VespaMotorsport
4 жыл бұрын
If you're referring to the cap on the bleeder valve, we do offer a replacement: www.scooterwest.com/coolant-drain-bleeder-rubber-cap-063435.html You're probably OK without it for a while, but you don't want that valve to corrode or get debris in it. Thanks!
@andrewkolb2527
4 жыл бұрын
Robot. I live in Batavia Illinois. Can I buy a primavera 150 from you guys and have it delivered to me? How do I find a guy like you to service it?
@VespaMotorsport
4 жыл бұрын
We have shipped scooters all over the place. Call our showroom to find out some more solid info. 619-280-1718 Thanks!
@sisdavid
5 жыл бұрын
Couldn't you just use gravity?
@fabiosubfire9812
4 жыл бұрын
bravo....peccato che non sa italiano
@kingbcs6
2 жыл бұрын
Great video but that shirt has to go. GO SOUNDERS!
Пікірлер: 35