Your addition of the downdraft table element is really unique. I like that. I also liked how you used pegboard as a template for the holes. Really creative. Thanks for the inspiration!
@YouCanMakeThisToo
7 жыл бұрын
+The Naked Carpenter I appreciate that! I thought it'd be a good inclusion with the table so large. The downdraft is a better gain over another cubby.
@unclepaul7090
7 жыл бұрын
I was about to write the same thing! I'll be using this idea! Thansk!
@YouCanMakeThisToo
7 жыл бұрын
+Uncle Paul thanks for commenting! Glad you found it useful.
@bigthinkinguy
4 жыл бұрын
Did you mark and drill all the dog holes by hand? There is a tool from a little outfit called Woodrave that uses pegboard and your router to get perfect 90% holes.
@YouCanMakeThisToo
4 жыл бұрын
I did drill them all by hand. That would’ve been handy to have
@gregdekeyser580
6 жыл бұрын
Just finished this build, thank you for the idea of a downdraft in the table. On a side note, when pushing stock through on the table saw the build looks like the flag to me, even cooler!
@YouCanMakeThisToo
6 жыл бұрын
+Greg DeKeyser that’s awesome! Glad you built it and enjoy using it!
@stevemettes1132
7 жыл бұрын
Caleb, we now see what you have done to Andy's garage! It was good to meet you in Skiatook, OK and chat about the old neighborhood this past weekend, now take your wife out for some of that catfish we told you about. And our chance meeting really shows you just how small the world is. Oh, the work table is awesome as well.
@YouCanMakeThisToo
7 жыл бұрын
+Steve Mettes it was great meeting you guys as well! What a small world. I still have the directions to that catfish place and we will be checking it out.
@bigthinkinguy
4 жыл бұрын
Excellent ideas. I like the idea of a built in downdraft table, it's closer to my needs than the portable units.
@YouCanMakeThisToo
4 жыл бұрын
It was really handy to have!
@ryananthony4840
2 жыл бұрын
I like the way you think, I had the same idea years ago and just now setting my woodshop back up.....
@NikeMS11
5 жыл бұрын
Great idea spray painting the boards with the holes to be drilled. Brilliant. Mine is much smaller, but has the down draft bit too. Then again, my shop is small & narrow. Great video
@YouCanMakeThisToo
5 жыл бұрын
Thanks! Occasionally I have moments of genius like that. The downdraft is great! I ended up getting rid of this cause it was too big. Built a 3x4 assembly table and just finished a 2x4 handtool bench.
@NikeMS11
5 жыл бұрын
YouCanMakeThisToo Do you have videos on those?
@YouCanMakeThisToo
5 жыл бұрын
I sure do. Go to my page and check out the workbenches playlist. They’re all there. I’ve built like four, haha. It’s practically it’s own hobby.
@Nathan-H
4 жыл бұрын
A great build, As constructive feedback at times the back ground music was so loud, I struggled to hear what you were saying. It may be beneficial to keep this in mind in your future videos. I too liked how you've incorporated a downdraft table and I thought how you used pegboard and spray paint as a template for the holes was pure genius.
@Badgerworkshop
7 жыл бұрын
Great looking bench. I hope it gives you many years of service
@YouCanMakeThisToo
7 жыл бұрын
+Badger Workshop thanks! Before long I plan to make another bench better suited to taking the abuse of handtool work and this will mostly be for assembly. But I'm pleased that this one is passable at it.
@Badgerworkshop
7 жыл бұрын
Building a hand tool bench is my task for this week.
@YouCanMakeThisToo
7 жыл бұрын
+Badger Workshop fantastic. I look forward to seeing it
@r.waynefournier4283
4 жыл бұрын
Really liked your 'editing trick' and your 'little helper' too.
@YouCanMakeThisToo
4 жыл бұрын
Thanks! 😃
@ilyaivanov1745
7 жыл бұрын
I really liked this table ! I especially liked the little assistant on the table !
@EdPalmatier
4 жыл бұрын
Thanks for the idea. I have been trying to think of how to spce the holes and this just solved the problem.
@YouCanMakeThisToo
4 жыл бұрын
Glad I could help!
@mikewest9086
5 жыл бұрын
Really liked the build, and the addition of the downdraft table. Not sure why so many people are crying about the music, though. Who would have thought there would be so many professional music critics in the KZitem woodworking community? Honestly, I didn't give the music a second thought, until I read the comments. Everybody's an expert at everything they didn't make, though. Can't win 'em all, I suppose. Nice work, brother.
@YouCanMakeThisToo
5 жыл бұрын
Thanks, Michael! The downdraft worked better than I expected, even with my small dust collector. The only issue was remembering it was there 😁. The music thing is weird, I’ve learned that many (or at least vocal) people have little tolerance for music outside their preferred genre. Personally, I only listen to the background music I use when I make the vids... it’s not my normal listening stuff, but I think it helps set a tone. Ah well, as you said, can’t please them all.
@michaeladamson1729
2 жыл бұрын
I like the sanding corner
@YouCanMakeThisToo
2 жыл бұрын
It was handy
@realworldcarpentryremodeli5868
5 жыл бұрын
I like the peg board layout trick with the spray paint.
@YouCanMakeThisToo
5 жыл бұрын
Thanks! That was a huge timesaver.
@jrumbel
5 жыл бұрын
The downdraft section is an awesome idea! The only way I can see to make a significant improvement would be to have drilled your dog holes using the Parf Guide system. But that is another cost I guess. Thanks for the video mate!
@YouCanMakeThisToo
5 жыл бұрын
Any kind of jig probably would’ve made them better. Then they could be used for squaring as well, I was just using it for holding though. And thanks!
@YannickRoy76
7 жыл бұрын
Great table and great idea including a downdraft table! The template was cool too!!
@YouCanMakeThisToo
7 жыл бұрын
+Yannick Roy thanks! I get your confusion. When I put the ramp in the table was upside down, so it looked like I closed it off. But then I flipped the table before I drilled the holes. So the holes are on the side of the ramp with the vacuum port.
@YannickRoy76
7 жыл бұрын
Oops I just realized that you had it upside down...
@anniegaignard9987
7 жыл бұрын
At 7:15 into the video I see that you have your dust vacuumed with a kit hooked up to your drill press could you tell me who make's it? Thanks
@YouCanMakeThisToo
7 жыл бұрын
Thanks! Glad you liked it.
@YouCanMakeThisToo
7 жыл бұрын
+YooToob Consumer who made what?
@zimmermansworkshop9394
6 жыл бұрын
Thanks for the link to the casters. Now I can trash about 20 hours of cad and design work on what I was coming up with! :)
@YouCanMakeThisToo
6 жыл бұрын
Haha I understand! I’ve spent tons of time prototyping and making half ass casters on older workbenches.. really glad I just bought some good ones this time.
@kevinfinney8849
7 жыл бұрын
great idea on the use of peg board for hole layout on your down draft!
@YouCanMakeThisToo
7 жыл бұрын
+kevin Finney thanks man! I saw others use it for the top but I wanted to just use my plywood but figured it'd be a good template.
@davemeads859
3 жыл бұрын
lol watching you use all those screws all I can hear my tight ass old boss whinging about how "screws aren't cheap just glue and pin it"
@YouCanMakeThisToo
3 жыл бұрын
Haha sounds like a real cheap fella
@andrewbieger5004
7 жыл бұрын
That is a very sweet concept. I have several shop projects in the works, also based upon Ron Paulk plans, which I purchased on his website. I hope everyone who does use his plans will through him a bone by actually purchasing them. Your addition of the down draft section gives you double duty of that section of the table. Beats hell out of a separate DD table, cause who has the room?
@YouCanMakeThisToo
7 жыл бұрын
+Andrew Bieger thanks! I definitely second the notion of supporting those that come up with designs.
@allentegarden9686
7 жыл бұрын
Nice! I like your spin on this design. I am going to steal a couple of your ideas for the bench I'm building!
@YouCanMakeThisToo
7 жыл бұрын
+Allen Tegarden glad you found it helpful!
@russg9406
2 жыл бұрын
The only thing I would add is a little round over on the edges. I have a similar table and this has saved so many times from chipping off the top.
@YouCanMakeThisToo
2 жыл бұрын
That’s a good tip!
@sgsax
7 жыл бұрын
Nice added feature!
@YouCanMakeThisToo
7 жыл бұрын
+Seth Galitzer thanks!
@MichaelLawing
7 жыл бұрын
That's a large task! Nice work!
@YouCanMakeThisToo
7 жыл бұрын
Thanks, I appreciate it! Definitely worth it though.
@ZolaBolingo
5 жыл бұрын
C’est du bon boulot, merci pour le partage.
@WoodWorkLIFE
7 жыл бұрын
So many Holes...how is your drill feeling?
@YouCanMakeThisToo
7 жыл бұрын
+Wood.Work.LIFE. All three of them are pretty sore!
@RocketManJeff
7 жыл бұрын
Very nice build.
@YouCanMakeThisToo
7 жыл бұрын
+RocketManJeff thanks!
@msgajhimelret9496
5 жыл бұрын
Very nice build and downdraft section; thoughts on using pegboard inlaid like a router plate? a small cross section underneath for support?
@YouCanMakeThisToo
5 жыл бұрын
That would work fine! Save a lot of time drilling, you’d just have to remember that it still isn’t as strong as the rest of your top.
@steven6068
7 жыл бұрын
Hi, Great job on the table. I like the down draft addition and your template idea. Can you post a URL for the stretchy sandpaper? Looking for your next videos...
@YouCanMakeThisToo
7 жыл бұрын
I added an affiliate link for the sandpaper to the "tools I used" part of the description. Thanks for watching! I have some cool videos coming down the pipe for you soon.
@1LeggedAdventures
7 жыл бұрын
Perhaps i missed something on the down draft box. you placed a "ramp" on the inside but how is the dust supposed to get sucked out? Loved the template idea for the smaller holes. i will be stealing that. Great video.
@YouCanMakeThisToo
7 жыл бұрын
+Jeff Chaffin thanks, Jeff. I put the ramp in while the table was still upside down, that created a chamber which contained the air port. Then when I flipped it over and drilled the holes that put the holes in the same chamber as the port.
@1LeggedAdventures
7 жыл бұрын
YouCanMakeThisToo yes you certainly did. Lol my mistake.
@YouCanMakeThisToo
7 жыл бұрын
+Jeff Chaffin haha no worries man. Check the comments and you'll see many have missed that.
@naynay5637
5 жыл бұрын
Nice build, thanks for sharing! Not sure if this has been mentioned, but I do wonder if drilling that many (albeit tiny) holes actually ends up reducing the amount of suction you'd get in that section. I believe I'd stick with just using the dog holes.
@YouCanMakeThisToo
5 жыл бұрын
It worked great! I thought was big holes all the suction would be close to the port and die farther away.
@awlthatwoodcrafts8911
5 жыл бұрын
Smaller holes give you the venturi effect.
@YouCanMakeThisToo
5 жыл бұрын
You’re smarter than me
@GSGGage
7 жыл бұрын
Awesome table
@YouCanMakeThisToo
7 жыл бұрын
+David Harris thanks!
@calleeharris4182
7 жыл бұрын
Table is awesome! I hope you are paying your little assistant well hehehe. On a technical side, be sure to slow the words scrolling down next time you use that. I have no idea what it said. Might've been able to read it if I didn't have a toddler in my lap while watching, but it was pretty fast.
@YouCanMakeThisToo
7 жыл бұрын
+Callee Harris oh, he gets paid really really well.
@JkCanvas
5 жыл бұрын
Genius idea to use pegboard as a template and paint
@YouCanMakeThisToo
5 жыл бұрын
It was definitely one of my better moments.
@paolonetube
7 жыл бұрын
Nice work!👍
@YouCanMakeThisToo
7 жыл бұрын
+Paolo Bosco thanks man!
@willh1827
5 жыл бұрын
I know this video is a couple years old but can you explain the ramp piece at 5:02? How does the air pass the ramp into the lower part?
@YouCanMakeThisToo
5 жыл бұрын
It was upside down.
@willh1827
5 жыл бұрын
YouCanMakeThisToo oh haha gotcha. Thanks I think I need some caffeine 🤦🏻♂️
@BruceAUlrich
7 жыл бұрын
Looks like a great work surface! Are you happy with the casters? I looked at getting some of those a while back.
@YouCanMakeThisToo
7 жыл бұрын
+Bruce A. Ulrich thanks, Bruce! I’m really pleased with them. Pretty sure I’ve gone over the weight on them and they roll great.
@BruceAUlrich
7 жыл бұрын
Well, that's good to hear! I like how they flip up out of the way when you're not using them and your workbench can sit on the ground.
@YouCanMakeThisToo
7 жыл бұрын
+Bruce A. Ulrich for sure! They also have a mounting kit so you can have one set of wheels and easily swap them between items. Great for heavy stuff that rarely moves.
@Sigmadog1975
2 жыл бұрын
can you share the plan for your drill press vacuum system or a good photo of it? Thanks
@garym8582
7 жыл бұрын
Very nice bench and well made, but completely off-topic, what's that song playing near the end (repeating "ooh yeah, ooh yeah")? Cheers!
@YouCanMakeThisToo
7 жыл бұрын
It's Summer Drive by Joakim Karud. Thanks!
@lucasregiscardoso
7 жыл бұрын
Very good
@YouCanMakeThisToo
7 жыл бұрын
+LUCAS REGIS CARDOSO thank you!
@scottpage6019
2 жыл бұрын
im building that! thanks
@Lifendason
4 жыл бұрын
Your miter saw link leads to a Hitachi C12RSH2, but in the video your using a Dewalt. Did you switch and if so, is the Hitachi better?
@YouCanMakeThisToo
4 жыл бұрын
Oh weird. Yes! I enjoyed the dewalt, solid saw. But it was a fixed 10”. The hitachi is a 12” slider, I just wanted more capacity. And I actually recently upgraded that to the makita 12” slider to get better dust collection.
@ShogunJimi
7 жыл бұрын
when does mine get deliveried - LOL - great job!
@CalebHarris87
7 жыл бұрын
Haha, thanks Jimi!
@Thom4123
7 жыл бұрын
Dam and I was going to ask where you got that from lol. Awesome job
@YouCanMakeThisToo
7 жыл бұрын
+Thom spillane haha thanks!
@WelshRabbit
6 жыл бұрын
So, pls. tell us which technique you did use to locate and drill the dog holes? How long did it take?
@YouCanMakeThisToo
6 жыл бұрын
I used a chalk line and t square to mark off the holes, then I drilled each one. It took an hour or two.
@barryroberts6470
7 жыл бұрын
Really nice bench build well done, one thing those dog holes that you did, why didn't you use a router to do the holes? New Subscriber Now. Barry (ENG)
@YouCanMakeThisToo
7 жыл бұрын
+Barry Roberts thanks! I didn't have router bit guides, a good bit for that task, and didn't want to mess with setting up a template. Chucking up a bit and drilling just seemed easier. It's purely personal preference.
@iowaboy9361
9 ай бұрын
The book provides clear illustrations kzitem.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO diagrams that cover many of the essential topics. The projects at the end of the book are valuable for enhancing your skills and creating your own furniture. A digital platform linked to the book that could offer the plans for other woodworking projects with the cut sheets would have been a nice addition, but overall, the book is excellent.
@YouCanMakeThisToo
9 ай бұрын
Hardwood or plywood.
@TucsonDesign
6 жыл бұрын
Nice! Where did you get that bit holder you have on your impact driver?
@YouCanMakeThisToo
6 жыл бұрын
Thanks! Pretty sure it was a Lowe’s holiday find.
@mattplummer3444
5 жыл бұрын
Nice work! Enjoyed watching the build. Tell me, what is the dust extraction shroud on your drill press? Drillnado? Are you happy with the system?
@YouCanMakeThisToo
5 жыл бұрын
Thanks! It is the drillnado. It’s okay. Works alright, but gets in the way a lot. I’ve barely used it since I installed it.
@WildmanTech
7 жыл бұрын
Where do you get those casters?
@YouCanMakeThisToo
7 жыл бұрын
+Wildman Tech picked them up at a Woodworking show. Added affiliate links in the description. They're awesome! Rated to 400lbs.
@WildmanTech
7 жыл бұрын
Thanks! They're exactly what I've been looking for!
@WildmanTech
7 жыл бұрын
I made my own. Video out Sunday morn. Thanks for the inspiration! Mentioned you.
@YouCanMakeThisToo
7 жыл бұрын
Wildman Tech thanks I really appreciate that! I look forward to seeing it.
@tanyajd7005
Жыл бұрын
Looks cool, can't hear anything over the music though
@RTD121276
7 жыл бұрын
Nice Victory :) Subscribed!
@YouCanMakeThisToo
7 жыл бұрын
+RTD121276 thanks!
@misterfee6467
2 жыл бұрын
lmao some dangerous ass shit happens in that shop
@YouCanMakeThisToo
2 жыл бұрын
Just a guy doing things in his garage man
@jakoj2098
4 жыл бұрын
How dose it go for rigidity and top vibrations during heavy tasks like chiseling?
@YouCanMakeThisToo
4 жыл бұрын
It worked pretty well. Some more bracing on the bottom would help.
@jakoj2098
4 жыл бұрын
@@YouCanMakeThisToo thanks u mean the legs or just thicker internal spine pieces
@YouCanMakeThisToo
4 жыл бұрын
@@jakoj2098 The legs on the base. The top is crazy rigid.
@jakoj2098
4 жыл бұрын
@@YouCanMakeThisToo yeah prob the straps as hinges might give too much flex maybe it needs metal hinges and timber fixed span on lower leg.
@bobkeller8383
5 жыл бұрын
You have a woodshop but no truck?
@YouCanMakeThisToo
5 жыл бұрын
At that time, correct. When the timing belt went in my car I bought a truck. I’ve been woodworking for 7 years, I’ve had a truck three of them. Dropped the rear and front seat I could fit 8’ sticks of most common dimensions in my car. Only plywood was an issue. Precutting at the store sometimes worked, when it didn’t I’d rent a truck. As convenient as the truck is, I would prefer to go back to a $20 rental every month or two over my current truck payment each month. It was way cheaper.
@1QKGLH
11 ай бұрын
The choice and volume of the background 'music' made this impossible to watch. I would mute it, but there's also a little instruction in the background (should be in the foreground).
@YouCanMakeThisToo
10 ай бұрын
Yeah, this is one of my first videos before I learned how quiet you've really gotta turn down the music, and way before I could afford to higher a real editor. But, I've paid to get captions done for all those videos.
@spacecat86
7 жыл бұрын
effin subscribed
@YouCanMakeThisToo
7 жыл бұрын
effin awesome
@kevinhanna8857
7 жыл бұрын
How is the downdraft working for you? Is it still effective? Do you have anything you would do differently? I agree not having a work table to build a work table stinks!!!
@YouCanMakeThisToo
7 жыл бұрын
+Kevin Hanna it works pretty good! My dust collector is a little under powered for it but I'm going to upgrade it eventually. But I wish I'd drill less holes now and then just drilled more later when I upgrade. Honestly.. now that I have some other news tools and I'm trying to arrange I wish I'd only gone 6' long. Love to see what you come up with!
@bigthinkinguy
4 жыл бұрын
Curious, did you use 20mm or 3/4" dog holes?
@YouCanMakeThisToo
4 жыл бұрын
3/4"
@rjmills126
2 жыл бұрын
How tall are the sides? 8”?
@bvm7661
7 жыл бұрын
Are your dog holes truly squared?
@YouCanMakeThisToo
7 жыл бұрын
No, they're just plain round holes, so "dog holes" might be the wrong name, but I don't know what else to call them. But they fit my Kreg dogs which work as stops, and with the 1.5" inch it can hold a holdfast (not crazy tight, but enough for light work).
@snagcreek3204
5 жыл бұрын
What type of dust mask do you wear in your videos when sanding?
@YouCanMakeThisToo
5 жыл бұрын
RZ mask
@AndyJame-kf5hs
Жыл бұрын
Is IKEA wood real wood?
@YouCanMakeThisToo
Жыл бұрын
Depends on the product. They have some real wood stuff
@drgypsum
6 жыл бұрын
Cover dat bike!!
@YouCanMakeThisToo
6 жыл бұрын
+drgypsum yeah I need to!
@timflanigan8586
6 жыл бұрын
Love the build.....the music....not so much.
@YouCanMakeThisToo
6 жыл бұрын
Glad you enjoyed the build!
@NomadMakes
5 жыл бұрын
A really nice project, that workbench. MIne more simple, but has lots of nifty features ;-) Subbed! If you have the inclination, stop by my fledgling channel and show some support. Cheers.
@YouCanMakeThisToo
5 жыл бұрын
Thanks! I’ll go check it out
@majortom4308
7 жыл бұрын
Thank you for posting your build. Really liked it and your commentary was very instructive. THE MUSIC IS TERRIBLE MAN! Next time go without, please.
@YouCanMakeThisToo
7 жыл бұрын
+JenkkiTomppa thanks! Glad you enjoyed the build and commentary.
@newstart49
6 жыл бұрын
You cannot "Pre-drill" holes. You whether drill a hole or you don't. Nice table! Good for light work.
@YouCanMakeThisToo
6 жыл бұрын
Oxford and Collins dictionaries both disagree with you on the vocabulary point. But thanks!
@newstart49
6 жыл бұрын
LOL. Stick with me. If you drill a hole, you have not pre-drilled it- you cannot drill a hole before you drill it, because you have already drilled the hole. You can't pre-shoot a bird, pre-cut a tree down. You can say; Pre-fabricate the workbench as in cut all the materials and drill all holes to be assembled later. Tedious and moot, but something to think about. Maybe I'm wrong?
@YouCanMakeThisToo
6 жыл бұрын
Your logic is sound and correct, but etymology doesn’t work on logic. If people use a word or term a way long enough that’s it’s understood to have a meaning, then that’s what it means. Just like google is a company, but now it means to search. Xerox is a manufacturer, but it also means to copy. Velcro is a brand, but it also means hook and pile tape, or to fasten with that tape.
@_LiquidFire
6 жыл бұрын
newstart49 - Your last sentence is correct. You are pre-drilling the holes which would be made by the screws. So the logic would be that you are boring a hole which would be bored via the screw, hence "pre-drilling" that which would be drilled via the screw. [consider the verb usage of the word drill: to make (a hole) by boring.] The screw "would" make that hole, hence the screw would "drill" that hole. However, since the hole is being created before the screw has the opportunity, it has been "pre-drilled" in the exact and proper location in which the screw will be placed - removing the drilling action from the screw itself. aka pre-drilled
@mikewest9086
5 жыл бұрын
Arguing semantics, while being fully wrong, no less. And, adding in the backhanded "compliment" that the table is only good for light work? Poor form.
@ltnthacker
7 жыл бұрын
Build was cool; music, not so much.
@YouCanMakeThisToo
7 жыл бұрын
+Steve R glad you liked the build!
@twoweary
7 жыл бұрын
Not a bad bench, but do grown men really listen to that kind of music? Thank god for the mute button.
@YouCanMakeThisToo
7 жыл бұрын
+twoweary glad you didn't think the bench was bad, and glad you found the mute button, pretty sure that's why it's there.
Пікірлер: 164