Perfect Thanks so much, I simply didnt realise that I could simply type peak and off peak in the helper
@tommccauley7471
Жыл бұрын
I was having no luck in getting my Energy setup to accept my Consumed Energy variable, after following your lead in this video exactly. Then, I realized that I wasn't recording any of the power/energy variables. Adding them to the Recorder fixed the problem. Thanks for the video.
@timshephard
4 ай бұрын
Thanks for the video! I’m in CA and we have off peak - mid peak - peak - mid peak (again) - off peak. And it changes based on Summer and Winter rates!! You explained it well enough, I think I was able to make the changes I needed.
@WayneRigley
4 ай бұрын
im in Canada and same thing here,.,. same as you.. just want to get this running then adjust and break it LOL
@jeroenvde
Жыл бұрын
Thank you, I finally managed to got my energy dashboard working with on/off peak because of your video . 😎
@MrChris79
8 ай бұрын
Thanks. This video helped me setup my ha and power adapters so I could see how much actual $$$ my homelab is costing me. :)
@scottb721
4 ай бұрын
For my multi time tariff power (Peak, Shoulder and Offpeak M-F, and Shoulder and Offpeak on weekends) I was able to create a Helper Template that sets an entity to the current tariff. A change in this entity is then used as a trigger in a single automation that sets ALL of my power meters into the correct tariff.
@gjheydon
Жыл бұрын
I am a bit late but I have a curly example for you. Here in the Solomon islands we have very expensive power $7.33SBD/kWh which is about $0.88USD/kWh where as in Australia I pay 0.23AUD/kWh which is $0.16USD/kWh. Like you we have a monthly stepped tariffs of off peak, shoulder and peak. Also it is very hot here and as an expat we love the air conditioners and have the running just about all day so it is very expensive to run. Lastly We have cash power which is prepaid electricity, so even though the tariff resets at the 1st day of the month, it really doesn't kick in until you purchase your first lot of cash power in the month and it means you could not start using your off peak until 10-15th of the month depending on how much power you had left over from the last month. My background is that I built utility billing systems for Electricity, water and gas companies that would bill 40-100k houses every night and this is doing my head in. I would like to be able to accurately determine the cost of the air conditioners but I do not know when my first kWh is going to be used. I think I am going to ignore this and reset at the beginning of the month. Ideas will be welcome.
@mostlychris
Жыл бұрын
You have a good challenge here. The hard part, as you mention, is figuring out the start of your billing. It sounds like it varies based on usage and how much cash power you purchase. I would be interested as well if anyone knows a good way to track this. Tariffs are the worst ever for consumers. Probably make lots of money for providers though.
@iMxXxMi
Жыл бұрын
I hope u start using dark mode in your intro and browser, your bright videos blinds me as i always watch these at night lol. Nice vid btw.
@mostlychris
Жыл бұрын
Keeps you awake!
@RandallNorth
Жыл бұрын
I do not see the cost sensors for the individual tariffs in home assistant. However, the cost column is displayed in the energy dashboard by the ui. How do you get these cost sensirs to show up?
@Radhoo2k10
Жыл бұрын
Great video as always Chris. Quick question. I got a plug that monitors the energy usage for the freezer. Is there a way to also get cost of that usage? I got a template that gives me the total cost of the energy every hour. Here in Norway we got variable price pr hour.
@Kiloptero
Жыл бұрын
amazing,; Works fine! thanks again!... there is a way to has a individual cost for items . like freezer, ac , hvac, etc? specially with variable rate of the energy
@mostlychris
Жыл бұрын
If you want to monitor individual circuits, grab an emporia and put it in your panel. Or you can use power monitoring plugs. All of those type things should show automatically in the energy dashboard if HA recognizes them as an energy device.
@Kiloptero
Жыл бұрын
@@mostlychris yes, thanks.. but im talking about cost managment more than consume. already install a few plug
@sammywonks404
Жыл бұрын
Useful video, thank you. I had a quick question - is there a way to stream data from Tesla solar panels. I have just the Tesla solar setup at home but dont have an electric car or battery backup. Tried looking around but didnt find a working solution
@stephenanderson2577
Жыл бұрын
I am getting frustrated with the utility meter helper. I am using Emporia Vue and my service is SRP in Arizona and there are 6 different tariffs based on time and month. Peak and Off Peak rates change from winter to summer and then again for Summer Peak rates. Do I need to build 6 different Tariffs and 6 automations to switch out then add all of those helpers as sources in the dashboard? Thanks for any help. Youre right Tariffs are difficult.
@cyberphox
Жыл бұрын
Have the same Aeotec energy clamps and a recent update broke my energy page. Do you have a github or code anywhere that shows how you made that sensor?
@gmaclean1
Жыл бұрын
How about base charges? Noticed you left out the connection cost of $9 out. Mine is closer to $30.
@mostlychris
Жыл бұрын
Didn't include it for simplicity as everyone is likely to have some sort of differing set of charges. The charge can be added as part of the template sensor.
@tatersaladfpv1033
7 ай бұрын
would this still work if you get a net reading from your meter? For example, I receive the total kwh from my meter into HA so I see like 27,273 and it just always increases.
@familjenlindh
Жыл бұрын
Thanks for a great video! I have a question regarding some cards I see on your dashboard that you show 17 min into the video. There are some cards that are filled with color to a certain percentage. How do you do that?
@mostlychris
Жыл бұрын
I use the bignumber-card for those and set the severity to change colors at certain values.
@roymorrison1075
Жыл бұрын
I have a daily sevice charge, any idea how to add that into the chart ? Great vid to Chris, by the way. :-)
@mostlychris
Жыл бұрын
I would add a template sensor and add that value as part of the math in the template.
@alexf2667
Жыл бұрын
u pay 7cent/penny per KhW? or 9 in peak?!
@jmr
Жыл бұрын
Sounds like you are on hillbilly peak demand. Me too but they figured out how to make mine more complicated. I don't even know what day my billing cycles will begin and end.
@mostlychris
Жыл бұрын
Garbage and unnecessary.
@jproveta
Жыл бұрын
I had the Energy Dashboard working correctly until I updated HA from version 2023.2 to 2023.3.2, the graphics and information on Emergy stopped work, I no longer had electricity usage data and CO2 says "Consumed low-carbon energy couldn't be calculated", I already updated to the latest version of HA 2023.3.3 and everything is still the same, and the devices are working fine and with kWh information. Some help ?
@WadeAbout
8 ай бұрын
How would you add a daily service charge plus peak and off peak and selling solar etc
@WadeAbout
8 ай бұрын
Each of those are different rates
@llablancheHermineBZH
24 күн бұрын
Salut mais pour moi il est impossible de faire entre mes sensor de mon onduleur off-grid ? Ci quelqu'un la solution Merci beaucoup
@Lonestar101
Жыл бұрын
How did you get Flume to show up on the Energy page?
@jmr
Жыл бұрын
Probably magic! 🤣
@mostlychris
Жыл бұрын
I have the flume integration and it shows up as a water sensor.
@Kiloptero
8 ай бұрын
hi! the last update 14.2 change the way to use currency.. any idea? Unit of measurements CLP, CLP, CLP of input sensors sensor.power_comsuption_day_cost, sensor.power_comsuption_peak_cost, sensor.power_comsuption_night_cost are not compatible and can't be converted with the device class monetary of sensor group sensor.costo_diario_energia. Please correct the unit of measurements on the source entities and reload the group sensor to fix this issue. Warning - 2/7/2024
@denisgrabocka1269
Жыл бұрын
Hey Chris we got the same Aeotec energy meter ...mine throws weired numbers at times and it is a known issue how do you compensate for that? thank you
@mostlychris
Жыл бұрын
Well...just today (and once a couple of weeks ago) it did this exact thing. My kWh usage is 6 million now. Useless for this month as there is not a way, without modifying the database, to remove that erroneous value. Having praised that device in the video for its reliability, I now think I need to get the newer version and see if it suffers the same issue.
@ItIsNotMeReally
Жыл бұрын
lol, Cameo wanted to say hi!
@bmischaw
Жыл бұрын
In Germany we pay 0.30€/kWh. I'm shocked how cheap your energy is!
@mostlychris
Жыл бұрын
My area is fairly inexpensive. There are probably more expensive areas of the US. Early on, we located datacenters here because of the cheap power.
@fdksdk4843
10 ай бұрын
Looks like you rushed the video at the end and did not show how to set up the sensors for tracking the price in the dashboard which shows the price etc. :(
Пікірлер: 45