He pretty much convinced me to have it done by someone who has done it before . Good video to show what is involved .
@JDH8208
3 жыл бұрын
I'm glad everything worked when you buttoned it back up. Believe I would have checked before I put everything back together. Of course I'm not as experienced at this as you are.
@wooddawg4868
5 жыл бұрын
I have watched a Lot of bar installs and there are a lot of companies that sell bars. It appears bars are made from one central company and folks buy them and put their name one them. Stainless steel or chrome plated steel bars look good.
@jedbuckeye001
5 жыл бұрын
I just finished mine up. Not a bad project, gets a little stressful pulling the wires through. There are longer wires on the Yaffe web site that is at the bottom of the bar order page. (Hard to find) ( highly recommended) the wire pull kit is worthless look at other videos use string and air. I used my stock cables and 6”Guerrilla cable extensions with the 12” Yaffe bars (Cheaper and easier) aux cables extensions available from Harley are cheap like $9 bucks. Didn’t really need. Stock clutch and brake cables were fine with the 12’s . The hardest part for me was getting the fairing back on. Ugh wasn’t starting high enough to clear top bolt holes. I did these on a 2018 street Glide CVO, factory grip heaters were long enough too. I was quoted $500-$600 from my dealer. I’m no hard core mechanic but I was able to do.
@ronaldlsmith1551
4 жыл бұрын
Yeah my bike going too the shop I can do it but dont have patience
@marcmo7138
4 жыл бұрын
fairing screws are t27
@ohcra
6 жыл бұрын
he did a 3 hour billable job in 30 minutes!!!!
@navcop73
5 жыл бұрын
What size heat shrink do you use on the throttle wires and control wires?
@finao8231
2 жыл бұрын
So what size bars are those and did you use the stock brakes and clutch cables? I have a 2021 street glide special and thinking of changing it to 12" bars but can I use my stock brakes and clutch cables? Please let me know thank you
@NoodlesNJ1
3 жыл бұрын
How much further can the bars be pulled towards the rider
@HospitalmanMikey
2 жыл бұрын
How different is this setup for a 2015 Electra Glide
@loydhelmick9682
3 жыл бұрын
nice tricks. Looks so much easier your way!
@corsairusawc
3 жыл бұрын
2017 streegluide do I have to reroute clutch and brake cables with 10 inch yaffe bars? Thank you
@battlebornhd3030
6 жыл бұрын
You should list what size these are and a link to where they can be found, would be a smart business decision I think. They look like 12”. I didn’t realize you could use the stock clutch and brake cables with these.
@nicktripi5338
5 жыл бұрын
They look like 10"
@pybaggernation
5 жыл бұрын
All Original Monkey Bars can be found on the site here, now including our pre-wired options or you can call Brady Pitmon on our sales team at: 602-576-8309
@Rickybobby1340
5 жыл бұрын
Can you still see the stock mirrors with those 10" bars?
@ronaldlsmith1551
4 жыл бұрын
Nope top mount
@bigbobmn
5 жыл бұрын
Would like to know what size heat shrink you used
@aaronmeyers451
6 жыл бұрын
My wires that are depinned definitely do not want to go through as easily as yours.
@fililoboesparza5784
2 жыл бұрын
That’s looks great👍🏻👍🏻 That’s the look I want for my 2018 H-D Limited!! Are those 10 inch ape?
@markdale6158
2 жыл бұрын
12s I think
@sandovalz64
4 жыл бұрын
How are you making sure the bars are in position? As to the bars being more forward(towards the front wheel) or back(towards the gas tank) is that just rider preference?
@pybaggernation
4 жыл бұрын
Hey Zack, Typically we run the bars parallel with the inner fairing but you can pull it back some if that’s what you prefer.
@paularcher9863
6 жыл бұрын
Hi Will the after market heated grips fit these??
@bradypitmon9231
5 жыл бұрын
Yes they will. Call Brady @ Bagger Nation for questions or orders.
@nathanstephens7758
6 жыл бұрын
My wires are to big to fit. I have destroyed them. Any tips on getting them to fit?
@pybaggernation
5 жыл бұрын
Call our store to discuss your bike and modifications that may need to be made to get the fit and style you want!
@TheTwoWheeledTeacher
4 жыл бұрын
I’m 100% confident I can replace my bars (my 10 inchers came in yesterday) thanks to this video. I may not be as quick, but I won’t have to pony up $350 for my Harley shop to do it. I have. 2013 street glide. Will my cables all reach or are those extensions absolutely necessary?
@pybaggernation
4 жыл бұрын
Hello Mason, You should be fine. Now remember to use some good Heat-Shrink on the electrical because many times people either don’t use it and try feeding the wires through one by one, or they try and force the factory sheathing in the pipe and it tends to stick to the inside of the bar. If you have any more questions please call 602-840-6177. Thank you very much and enjoy your ride!
@Chaplain161
4 жыл бұрын
Overall it was a good video. You skipped how to de-pin and re-pin the connectors though.
@pybaggernation
4 жыл бұрын
Hey Chris, Thank you for mentioning that. We have another video called "How to install PRE-WIRED Original Monkey Bars" where Paul discusses depinning. Check it out... kzitem.info/news/bejne/u2eru3ppo4ymd2U I will try and edit that in this video ASAP.
@mariogutierrez4128
5 жыл бұрын
How much are the 10” bar kit for a 2017 ultra limited
@bradypitmon9231
5 жыл бұрын
Call Brady @ Bagger Nation 10" Shown are $499 Prewired/Free shipping in the Lower 48. I can price out some options if you like.
@johncacic971
6 жыл бұрын
What size bars are those? Thanks
@crazystax1
6 жыл бұрын
John Cacic 10' inch Yaffe bars it looks like
@nicktripi5338
5 жыл бұрын
They look like 10"
@abdullaamin12
4 жыл бұрын
Good job 👍🏻 bro ❤️❤️❤️❤️
@manuelvaldivia7785
5 жыл бұрын
Great video, however, my 2012 sg has total of 18 wires on right side. A lot tuffer to run through as you demonstrated on your bike
@bradypitmon9231
5 жыл бұрын
Call Brady at the shop. He can help..
@manuelvaldivia7785
5 жыл бұрын
@@bradypitmon9231 Thank you for your response and i appreciate the help. After a few failure attemps , the mig wire was great idea and of course my kit didn't come with that long shrink fit, i had to wrap those wires tight. I successfully manage to run all the wires through. I look forward to see more of your guys videos. Thanks again
@pybaggernation
5 жыл бұрын
@@manuelvaldivia7785 It's good to hear that you were able to successfully complete this! We will hopefully continue to bring you content that is helpful, call the store at 602-840-4205 if you have any questions or need assistance in the future.
@d.p.andmore6180
5 жыл бұрын
the toughest part is installing the wire extensions, am i wrong, was that part totally omitted?
@Jeff-em7zs
5 жыл бұрын
I just ordered 12 inch monkey bars for a 19 road king special. Can you tell me if I'll need wire extensions or not?
@pybaggernation
5 жыл бұрын
Call 602-840-4205 for specific and technical questions!
@AroundtheWord8989
4 жыл бұрын
ยอดเยี่ยม verry good
@Phil5900
11 ай бұрын
So, common.. . Why you don't tell, what size they are??? Sorry, very unsympathetic!!!!!!!!!!!!!!
Пікірлер: 47