TY VERY NICE SHOP LAY OUT .I LOVE YOUR STYLE FROM DOUG
@realpdm
5 жыл бұрын
I have the same router table and also struggle with where to put it. It is on the floor as yours is. 😂I just came across your channel thanks for sharing.
@honeycuttwoodshop260
7 жыл бұрын
Love seeing how others set their shops up. Actually gave me a couple ideas for mine! thanks
@TyMoser
7 жыл бұрын
I always enjoy a shop tour and end up getting some good ideas out of them as well. Thanks, Ty
@MichaelLawing
7 жыл бұрын
I'm always glad to see someone with a shop that doesn't look "finished." That means you're doing stuff! I enjoyed your episode of MakerCast a lot, by the way!
@TyMoser
7 жыл бұрын
Thanks Michael, I enjoyed being on the MakerCast. I'm not sure that my shop will ever be finished.
@KSFWG
7 жыл бұрын
Ir's always good to see other shops. You might see something to help you out with your setup. Thanks for the tour, Ty!
@TyMoser
7 жыл бұрын
That's what I think too. I've gotten TONS of ideas from other people's shop tours. Plus it helps me document my own shop for my own purposes.
@ilyaivanov1745
7 жыл бұрын
Thanks for the review workshop !I like your shop !
@donnymcarter
7 жыл бұрын
The space looks great Ty! Thanks for the tour!
@TyMoser
7 жыл бұрын
Thanks for watching Donny!
@FredMcIntyre
7 жыл бұрын
Thanks for the tour!
@RoomiesGarage
6 жыл бұрын
Great shop tour...... glad I watched your video it gave me a lot of inspiration
@TyMoser
6 жыл бұрын
Thanks! I always like watching shop tours to get ideas on how to better organize my shop.
@robertevans6481
7 жыл бұрын
Awesome tour Ty...
@HackersbenchPage
7 жыл бұрын
Hi Ty. Found you from the Makercast and subscribed. Hi from Mesa. :-)
@TyMoser
7 жыл бұрын
Hey, I used to live in Mesa but moved next door to Chandler. Thanks for watching and subscribing!
@ronron8464
7 жыл бұрын
I enjoyed the tour, thanks Ty! 👍 Ron, Littlewierdshop
@TyMoser
7 жыл бұрын
Thanks Ron!
@jonyq04
7 жыл бұрын
I like your garage a lot! Mine is somewhat similar!! Subscribed
@TyMoser
7 жыл бұрын
I like my garage but boy am I ready to get out of it.. We moved to a new house a while back with a little property and plans to eventually build a shop. eventually....
@jonyq04
7 жыл бұрын
Building a shop must be quite satisfying, getting to choose the precise layout and having nice Windows plus electric outlets every 5 inches has got to be sweet. I wish you the Best of luck so that you can achieve that quickly. God bless
@x3dominator28
7 жыл бұрын
Jony Q I'm building mine right now. 24x40 with a covered 16x16 concrete pad to spray on. Excited!
@jonyq04
7 жыл бұрын
Dude!! Just the 24x40 is awesome, plus an area to finish away from your tables saw... That's gonna be my retirement gift to myself. Plus a SawStop, and a 17 inch band saw, and a 10 inch jointer, and a Kapex, and a dominoe jointer and the list goes on and on....
@jonyq04
7 жыл бұрын
If my investments truly pays off by then, I will switch the SawStop for a Martin...
@travisbrumfield638
7 жыл бұрын
Love the shop bro. Your dybid blanks are wesone. Do you think you could do a hybrid wood/epoxy table top like that or would stability be an issue?
@TyMoser
7 жыл бұрын
You would need to use a different kind of epoxy for it unless you had a GIANT pressure pot but it would be doable. You'd be spending out the nose for materials though.
@Gotwoodworkshop
7 жыл бұрын
Sweet tour man, really enjoyed it! Quick question, how does the portable AC do with keeping the temps down? Trying to figure out some sort of AC option in the shop that's not as expensive as a mini split!
@TyMoser
7 жыл бұрын
Thanks Matt! During the summer last year, I was lucky to get my shop temperatures down to 85° F by midnight if I turned that AC on at 7PM. To be fair, at the time my ceiling and west wall had ZERO insulation and the west wall got full afternoon hot as hell Arizona sun. After insulating my ceiling, I was able to get the temperatures down much faster and maintain them but still not as good as a mini-split would do. When I build my shop in the back yard, I'll be insulating like a mad man and installing a decent sized mini-split.
@Gotwoodworkshop
7 жыл бұрын
Thanks for the info! Out of curiosity, what is the outdoor temp when you were able to get it down to 85? In the midwest, the humidity is almost worse than the heat, so I'm thinking it may make a difference. I'm in that awkward place of needing a full functioning shop, but not wanting to devalue/mess up the house at the same time by cutting huge holes and having pipes running to a condenser. I may give it a shot and see what happens. The garage doors are insulated and 2 of the 3 walls join to the house and are all insulated with an insulated ceiling as well, but it has 12' ceilings so it may not work, but we'll see! Thanks again man! Oh, BTW you got me into stabilizing haha, got a full setup now and am just starting to fully get into it!
@TyMoser
7 жыл бұрын
In the middle of the summer our high temperatures will be 110-115° with almost no humidity and our lows will be around 86°. With my un-insulated wall facing the sun, it would reach 129° every day leaving the interior of my shop at about 120 when I got home from work at about 5PM. Since insulating my ceiling, the hottest I've seen my shop is around 110° and it cools down much faster. I also have 2 walls that join the house and are fully insulated. It's the west wall that kills me. I also insulated my garage door but saw almost no improvement. (That was before insulating my ceiling.) Awesome to hear about the stabilizing. What setup did you get? Are you going to start casting? I've been going crazy recently stabilizing and casting trying to build up stock before Charlie Kocourek releases a video he did at my place.
@Gotwoodworkshop
7 жыл бұрын
Dang, that's insanely hot! I don't get anything like that, but it will be 95 with 75% humidity and you are drenched within 10 minutes of being out there! I bought the TurnTex setup for stabilizing and have a pressure pot, but haven't done any casting yet. I do have a bunch of worthless wood to cast with, mostly Osage orange pieces, but haven't been lucky enough to find any of the sweet burls like you've found! I just need to order some alumilite and I'm good to start casting, still holding out to try and find it locally haha, paying for shipping sucks. Really enjoy seeing all of the cool blanks you've made! Still trying to get the dying while stabilizing down.
@TheKarpinTechy
7 жыл бұрын
Nice shop!thanks for the tour,by the way,what camera stabilizer are you using?very smooth camera movements!
@TyMoser
7 жыл бұрын
Thanks! I use a DJI Osmo for my shop tours.
@bquade70
7 жыл бұрын
nice shop tour Ty. great work your doing. Brian @ desertwoodworking
@TyMoser
7 жыл бұрын
Thanks Brian!
@tooljunkie555
7 жыл бұрын
thanks for the tour! how do u like the hf work bench? and what brand router table u have? I've been debating on making my own for both the workbench and router table or buying a Harbor Freight one and buying a little bench top one that's not made of all plastic because the Craftsman benchtop one I have is all plastic and defense gets jammed up all the time thanks bro
@TyMoser
7 жыл бұрын
Hey Joe, I was hesitant on getting a cheap workbench like the HF one for a long time because I wanted to build a nice solid one. I still plan on building my own but regret not spending the small amount of money the HF took a LONG time ago. It's not the best workbench and it needs to be tightened down on a regular basis but it has become one of the primary workstations in my shop. The router table I have is the Bench Dog model and I have found it to be very useful. However, if I were to do it again, I would get just an insert plate and build my own or build it into my table saw.
@tooljunkie555
7 жыл бұрын
Ty Moser okay I could see that happening and yes nothing like building your own workbench to suit your needs pacifically that's what I want to do but never enough time in a day you know what I mean I got the 47 two-by-fours that I need and a two by sixes LOL but just can't find the time to do it and as for the router table that sounds like the route I'm going to go no pun intended I got the sheet of melamine I just need to break it down and find a good plan set of plans to go off of thanks for getting back to me man and for the FYis
@akwekful
5 жыл бұрын
‘In my defence, I was left unsupervised’ sign lol. Get a like just for that
@TyMoser
5 жыл бұрын
lol. I can thank my wife for that one. She came home with it one day.
@BrianMcCauleyDesign
7 жыл бұрын
I didn't see a Dusty Life sticker…
@TyMoser
7 жыл бұрын
You my good man, are blind. :) @14:14, right door near the bottom.
@jakecarter2414
7 жыл бұрын
what size is your shop?
@TyMoser
7 жыл бұрын
Roughly 21'x20' - the water heater.
@jasonperry6046
7 жыл бұрын
What are the dimensions of your shop
@TyMoser
7 жыл бұрын
20x20'. All of the money I get from Google, Amazon & projects has slowly been growing a savings accounts so I can start on a 40x40' shop out back.
@jasonperry6046
7 жыл бұрын
That's a big jump in space. What are your plans for the extra space?
@TyMoser
7 жыл бұрын
I haven't really planned it out but seeing as how I'm always jumping around between a number of things I assume I'll have different work areas dedicated so I don't have to constantly be putting stuff away. Right now I'm always moving stuff so I can work on other stuff. I would also have larger assembly tables and work benches, a metal working area and I hope to have a dedicated finishing room. That sounds like a big jump in space but I'm sure it would get eaten up pretty fast.
Пікірлер: 49