Tolles Montage-Video! Das Einzige, was ggf. noch erwähnt werden sollte ist, dass diese Art der Schnellentlüftung laut Magura ausschließlich NACH Rückstellens der Kolben in ihre Ausgangspositionen "erlaubt" ist, das kam finde ich im Video nicht hervor.
@luckywilf9204
2 жыл бұрын
Sick product and sick riding!
@oakcomponents1839
2 жыл бұрын
Thanks!
@JM-yj4jf
11 ай бұрын
Hot tip: Cut your hose flush to avoid a leak between the barb and hose :)
@x0304
2 жыл бұрын
Hi Oak, I just installed the levers on my MT7. I love them. (Quality, contact point, power of the lever apply on the master cylinder...) Two suggestions if I can: -As already read below, we all don't speak German. If you can supply an installation manual in english and maybe a video in english it will be appreciated... -You recommend in the video to first install the brake hose on the master cylinder. And then the lever. What is not convenient for the lever installation with the bike close to the working table. But if you unscrew the two screws on the lever (the black one and the contact point) then you can install the lever first on the master cylinder (without the bike in your legs). And in a second time the brake hose. From my point of view, it is easier and faster. All the best!
@oakcomponents1839
2 жыл бұрын
Hey Xavier, thank you for your detailed feedback. We have an english manual for download on our website: www.oakcomponents.de/pages/service We are working on a new video already, which will be available in german and english. We hope to get the video finished as soon as possible. We will also take your idea in consideration for the new video. Cheers Team OAK
@helori7731
9 ай бұрын
very nice product but why is it so expensive? 140€ is a bit expensive for 2 brake lever for me.Hope did the same for 40€ for 1 lever but it isn t compatible with another brand..
@fpeter01
5 ай бұрын
Material is expensive, machining is expensive, human research is expensive, made in EU is expensive. ^.^
@helori7731
5 ай бұрын
@@fpeter01 but 1 little place of alu for 70?
@mpgt
2 жыл бұрын
I'm not speaking german... but watched every second of this video! Love seing thing like this! Is it me or the lever feel spongy at the end? Look like lever come to the grip...? Anyway, I would like to try it. But I already love my MT7... Just convince me to buy it, and I will ;)
@oakcomponents1839
2 жыл бұрын
Thank you for your positive comment. We are working on an English version of the video at the moment.You can set the lever up however you like it to be, close to the grip or far away. :)
@Hadroncollider_
Жыл бұрын
Geht der Knickschutz auch auf Stahlflexleitungen? z.B. Spiegler mit 6mm Außendurchmesser?
@oakcomponents1839
9 ай бұрын
Diese Kombination passt gut, sofern die Spiralfeder des Knickschutzes weggelassen wird. Abknicken der Leitung ist bei Stahlflex aber ohnehin kein Problem.
@dandantillthen588
2 жыл бұрын
Amazing!! How do I get to ship this to Singapore 🇸🇬?
@fungogh
2 жыл бұрын
r2-bike.com/en/oakcomponents
@oakcomponents1839
2 жыл бұрын
You can order our Root-Lever on r2-bike.com, they offer worldwide shipping.
@MrVIDEOACE
2 жыл бұрын
Sind eine neue Olive und Insertpin im Lieferufang enthalten?
@oakcomponents1839
2 жыл бұрын
Olive und Stützhülse sind nicht im Lieferumfang enthalten. Du findest die Bauteile bei jeder neuen Magura Bremse im Lieferumfang oder aber in deinem Entlüftungskit. Wäre es für dich wichtig, Olive und Stützhülse direkt im Root-Lever Lieferumfang zu haben?
@MrVIDEOACE
2 жыл бұрын
@@oakcomponents1839Ich fände das praktisch. Da ich bereits eine Mt7 ab werk verbaut habe, fällt diese Option weg. Im Entlüftunkskit lag leider nichts dergleichen bei. Ich fände es dann eher umständlich eine Werkstatt aufzusuchen um einzelne pins und inserts zu kaufen. Wenn ihr die Möglichkeit habt sowas beizulegen, wäre das eine gute Optimierung in meinen Augen.
@oakcomponents1839
2 жыл бұрын
@@MrVIDEOACE Danke für dein Feedback, wir behalten das auf jeden Fall im Hinterkopf.
@sebastiengiovannelli8556
Жыл бұрын
how to avoid the little play we can see at the end ? exactly at 11:14 , not when he pull the lever , but when he push forward the lever , no play with the 2 bolt epa cpa when you pull normaly to brake , but lever can move slightly forward
@oakcomponents1839
Жыл бұрын
With our new version, the Root-Lever Pro, there is no play if you set it up correctly. The play at 11.14 comes from the springy thrust piece we used. the play only occurs when you push the lever forwards, vibration wont move the lever. Hope that helps!
@sebastiengiovannelli8556
Жыл бұрын
@@oakcomponents1839 push the lever forward is by the magura design ?
@manfromanotherland
Жыл бұрын
Is there a version of the installation video for the new Root-Lever Pro? English voiceover (or subtitles) preferable!
@oakcomponents1839
Жыл бұрын
Hi Edmundo, we are working on a new installation video at the moment! In general the installation of our Root-Lever Pro works similar as the Root-Lever installation. Have a nice day! Team OAK
@Buwel
Жыл бұрын
Gibt es ein Freigabezertifikat von Magura von diesem Produkt?
@oakcomponents1839
9 ай бұрын
Wir sind diesbezüglich in Gesprächen mit dem Hersteller, die unsere Hebel natürlich bereits bestens kennen. Ob wir eine offizielle Freigabe erreichen können bleibt leider noch offen.
@markmeisner
2 жыл бұрын
Ordered and checking the DHL track and trace every hour 😂
@oakcomponents1839
2 жыл бұрын
Thank you Mark! Hope they are going to arrive soon 😁
@ShoneDaddy
Жыл бұрын
Can you please subtitle this in English like you did with the trp video
@oakcomponents1839
Жыл бұрын
Hey, thanks for the comment. We are working on an english version of the video atm. :)
@User-re9so
2 жыл бұрын
Bei der mt5 wird die Feder ja dann weg gelassen. Wie wirkt ihr dem Spiel beim leeren entgegen?
@oakcomponents1839
2 жыл бұрын
Unser Root-Lever liegt auf unserem eigens entwickelten Knickschutz auf. Durch die Auflagefläche benötigt man keine Feder, die sich bekanntlich immer aushängt.
@Tobi.v10
Жыл бұрын
Hab keine cover design kekommen :/
@MAXSCM
Жыл бұрын
war bei mir auch nicht dabei. Schade.
@oakcomponents1839
9 ай бұрын
Die Blendencover sind nicht Teil des Lieferumfangs. Die Cover passen nicht an alle Modelle und euch bleibt so die Wahl aus mehreren Designs. Sie sind bei uns und unseren Händlern aber erhältlich.
Пікірлер: 36