Laminators are a girls best friend right at the moment. These are awesome Ann. I have the glossy pouches but would like to get the matt ones to have on hand for some of these projects. Be well & TYFS
@marcelladimartino6113
3 жыл бұрын
Those gilden flakes with the green, blue and silver. They would be beautiful for a mermaid tail or some kind of marine dies.
@maryb5205
2 жыл бұрын
Love the butterfly and moth.
@purplemav
3 жыл бұрын
Hi Ann! thanks for using products multiple times and in multiple ways. I’ve gotten so tired of the “one hit wonders” who push products and use them only once. Your approach to using both what we have as well as things that are new is something I really appreciate. Thank you again!
@PositivelyPapercraft
3 жыл бұрын
You are so welcome! Yes i try to make my videos so that anyone can make them. I don't want it to be about products x
@Wyrmwood66
10 ай бұрын
I love your butterfly and the dragonfly
@margaretcornwall2252
3 жыл бұрын
You are making lockdown in Melbourne, Australia, bearable. Thanks for your inspiration.😣🐨🦘
@Denise11Schultz
2 жыл бұрын
Maybe you could treat the cardstock with your antistatic bag, like you would before embossing. I would do it just before the laminating, because I wouldn’t want to reduce the stickiness of the pouch, you need all that to catch gilding flakes. Also, when gilding onto size, (sizing glue) I like to brush with a soft makeup blush brush. It pushes the flakes into the glue and brushes the excess off equally well, especially when I brush in small circles. This is so beautiful, thank you.
@missychan63
3 жыл бұрын
Who would have thought when we purchased our laminators that they would become our new favorite craft tool? Thank you so much for sharing all of these fantastic ideas!
@PositivelyPapercraft
3 жыл бұрын
You are so welcome!
@karicoleman3548
3 жыл бұрын
I have so long wondered what more I could do with this thing and couldn’t find anything. This is waaay beyond what my imagination could conceive!
@eagerhands1
3 жыл бұрын
You never cease to amaze me! I have wondered when you have time to sleep. Perhaps you have dreams which allow you to create? Thank you for all the terrific ideas and hard work. Blessings!
@PositivelyPapercraft
3 жыл бұрын
Wow, thank you!
@angelwooten1985
3 жыл бұрын
Oh my goodness!!!! Stunning!!!! I love your wonderful ideas!!!!!🥰🥰
@PositivelyPapercraft
3 жыл бұрын
Thanks so much! 😊
@debracameron9012
3 жыл бұрын
Instead of adding the scrap piece of card at the top of the pouches, have you tried placing the laminating pouches in between a piece or two pieces of copier paper like a carrier sheet? I've done that and it works really well and you don't get the wrinkles or slight bends in the laminated pieces.
@LP-hl3px
3 жыл бұрын
Agree.....I use a piece of folded parchment paper as a carrier sheet and it works well.
@PositivelyPapercraft
3 жыл бұрын
I will try it and see ;-)
@xxdiamondlazerxx1763
Жыл бұрын
@@PositivelyPapercraft we used to use carrier sheets in school to laminate the kids work Also when you use the flakes on the dragonfly, if you use a dry paint brush to take off the excess onto the white sheet and then just fold it and put the flakes back into the jar ( like you do with the embossing powder).
@loke-art7383
3 жыл бұрын
Beautiful cards and great ideas ❤️
@kandicezaffarano6361
3 жыл бұрын
I like the snow on the matt pouch but the clear is my choice for sequins and glitter. sequin stars are great for a night sky over deep blue.
@judymedlong4593
3 жыл бұрын
the dragon fly is my favorite just love it so beautiful got to get the blue green flakes to make this you are wonderful
@abidaabbasi1897
2 жыл бұрын
So beautiful Ann your ideas are marvelous what a brilliant ideas 🙏thank you
@heatherr296
8 ай бұрын
I am stunned by how beautiful that dragonfly is. I had never heard of gilding flakes before but now I must have some!
@nancyludlum2646
3 жыл бұрын
TFS! Really appreciate more ways to use the laminator!
@margarettallett762
3 жыл бұрын
It's all about those gilding flakes!!! They're stunning. Such cool ideas! We had a laminator. I'll be asking my husband if it's been packed in our locker or donated when we moved. I can't remember!
@shirleydesrochers3319
3 жыл бұрын
Beautiful! I wonder if you use embossing anti static bag around the moth before using gilding flakes if it would help with flakes sticking.
@liletteautrey8481
3 жыл бұрын
I thought of it too , it would repel the flakes
@NiteOwlCrafter
3 жыл бұрын
That's a great idea!
@BearHarmony
3 жыл бұрын
Ann, you never disappoint! :D Once again, you have added to my crafty ideas and opened up my crafty supplies to NEW opportunities! You truly are a GEM to share all of your expertise with us! I so look forward to each and every one of your videos! :) TYSM for all that you are doing! I am HAPPY to reexplore my crafty stash with all of the POSSIBILITIES that you are suggesting!
@PositivelyPapercraft
3 жыл бұрын
You are so welcome!
@Tazzeasi
3 жыл бұрын
And there is more... your super ideas are endless, Ann. 👍 May I share a tip for when putting a floppy sheet of laminate through the laminator... If you gently slide a sheet of card underneath, this will support it in transit as it were. Obviously make sure not to let the card go through with the pouch. Margaret x
@PositivelyPapercraft
3 жыл бұрын
Yes! Thank you!
@lynblackledge4714
Жыл бұрын
Thanks for this - my laminator sits idle but not anymore - You have inspired me to get it out. xx thank you
@elizabethhampton1557
2 жыл бұрын
Love your videos...great ideas and demos!
@megjamieson3881
3 жыл бұрын
I love the aurora flakes Ann and great hacks XXX
@sistagirl1775
3 жыл бұрын
Very nice great tips! Thank you!
@kellercrucita550
3 жыл бұрын
Lovely creations!
@reneedurling4416
3 жыл бұрын
These ideas are beautiful and you make the explanations so easy to understand. Thank you so much for sharing. Please everyone don't forget to vote for our lovely lady, Ann.
@PositivelyPapercraft
3 жыл бұрын
Thank you so much!
@heathertoms4188
3 жыл бұрын
More brilliant ideas Ann thank you! x
@PositivelyPapercraft
3 жыл бұрын
You are so welcome!
@junewatkins2199
3 жыл бұрын
Thank you for your demonstration. I have done something similar but I put a piece of paper over the top of the die cut and then put it in the laminating folder and then laminate it. Then cut the folder sides and it just parts. Hope you understand that. x
@bernadettelawson2916
2 жыл бұрын
I know I’m late, but when adhering glitter or flakes I use a piece of wax paper. You can rub really well without pulling bits up. Just my hack x
@anniesews
3 жыл бұрын
Another super laminating video. I love the look of gilding flakes.
@dianec3279
3 жыл бұрын
Absolutely love the snowy effect on the laminating pouch. That can be used in so many ways. Great tips! Thanks for all you do Ann. You’re amazing!
@PositivelyPapercraft
3 жыл бұрын
You are so welcome!
@tami1796
Жыл бұрын
Thank you for sharing your videos
@robinleonard8862
3 жыл бұрын
what fun!! thanks for sharing!
@lyndasoar4345
3 жыл бұрын
Fabulous... :)) lots of info ... ive tried making a one sided-laminated box using scored paper-right side out-n copy paper inbetween, glitter & one(both sides of) pouch. Great result... so excited! ..lol thank u.
@PositivelyPapercraft
3 жыл бұрын
Wonderful!
@lilianmccarter406
3 жыл бұрын
More great ideas. Thank you.x
@PositivelyPapercraft
3 жыл бұрын
Thank you! 😊
@alisonmartin6101
3 жыл бұрын
Queen of the laminator! Wonderful projects. 👸🏼
@onedaysoon58
3 жыл бұрын
More brilliant ides Ann loved the black card with the gilding flakes x
@gracenote100
2 ай бұрын
To make sure that the laminting items stay in the position I put them until they go into the machine, I put a hardcover book under the empty laminating sheet, put my items in, close it, carry the book to the machine and feed the paper in completely level with the machine. That way they make the transfer like on a conveyor belt, all smoothly.
@nuttienattie1
3 жыл бұрын
Just loving these laminator hacks/ideas x
@PositivelyPapercraft
3 жыл бұрын
Thank you xx
@sherris5289
3 жыл бұрын
Wow, such beautiful items, love the butterfly
@Merricat66
3 жыл бұрын
So lovely! Makes me wonder about maybe some kind of sparkly embroidery thread in the pouch too? I’ll probably start going through my craft stash thinking “Oh! Let’s try this in a laminating pouch!” 😂
@angel_on_the_edge8084
3 жыл бұрын
Great techniques Ann. What meanies give thumbs down to your wonderful video content? TFS, x
@PositivelyPapercraft
3 жыл бұрын
Thanks so much 😊 One word...Jealousy xx
@barbarafarris2412
3 жыл бұрын
I love watching your hacks on laminating. I bought a machine now I have more ways to use it
@cindyinaz2357
3 жыл бұрын
I love these laminator videos
@annaarthur3641
3 жыл бұрын
Love your laminator tips! I use a Swiffer cloth to get excess dust and flakes off my paper.
@cwac4465
3 жыл бұрын
Thanks for acknowledging my idea. What a wonderful surprise! Perspective Moth turned out beautiful!! Enjoy your evening. 💚💙
@PositivelyPapercraft
3 жыл бұрын
You are very welcome 😊 thank you too and take care
@grandmajeddah1963
3 жыл бұрын
So pretty
@angelaharnett6437
3 жыл бұрын
Lots of great ideas Ann .x
@PositivelyPapercraft
3 жыл бұрын
Thanks so much 😊
@karicoleman3548
3 жыл бұрын
Brilliant.
@vanderbrowning1821
3 жыл бұрын
I made little folders with the trapped sequins x
@beulaholine8637
3 жыл бұрын
I really like the moth and butterfly. Thanks for sharing I will definitely try this technique when I get my laminator.
@PositivelyPapercraft
3 жыл бұрын
You are so welcome!
@whichwitchhazel
3 жыл бұрын
You are a fountain of knowledge Ann. An adhesive eraser would work for the sticky tape adhesive. Great ideas xx
@PositivelyPapercraft
3 жыл бұрын
Oh thank you!
@liletteautrey8481
3 жыл бұрын
You could also place a printer paper on top of the moth and iron it with a hot iron but no steam.
@brendastotts6779
3 жыл бұрын
I may not know what I'm talking about but something you talked about got the wheels in my mind turning. As to what you said about the laminator sheet that shows through the cut outs being sticky at first but it doesn't stay that way. Before you laminate anything the inside of the pouch is not sticky until you run it through the laminator. The heat activates the adhesive on the sheet. Once you get the item out and it cools back down to room temperature it returns to the state it was before you ran it through the laminator. It's just a guess on my part but it kinda makes since, maybe.
@PositivelyPapercraft
3 жыл бұрын
Yes, thats totally it :-)
@bittyscloset
3 жыл бұрын
Brilliant 👏 ❣
@bphomecraft
3 жыл бұрын
My laminator didn't like me sending one sided piece through, so I fold over a piece of greaseproof paper and it goes through a treat. 😊 The paper is reusable ❤ Thought I would share
@PositivelyPapercraft
3 жыл бұрын
Great tip x
@catmagic100
3 жыл бұрын
I am in another lockdown *sigh* but you always brighten my day. You sound so excited when you think of a way to improve what you are demonstrating and that makes me laugh. Not laugh at you but with you, you're a treasure Ann, don't ever change. Love from Melbourne, Australia. : D
@PositivelyPapercraft
3 жыл бұрын
Bless you, thank you so much and so sorry you are in lockdown :-(
@cwac4465
3 жыл бұрын
I agree! (Love to all southern hemisphere folks)! 🙏🙏🏾
@sherrydmyterko-tramp8654
3 жыл бұрын
Great ideas
@PositivelyPapercraft
3 жыл бұрын
Thank you! 😊
@ruthportway5198
2 жыл бұрын
Thanks Ann, another great idea. I was thinking that you only need a large enough piece of laminator pouch to adhere the die cut back into the outline shape not the whole piece of card - just an idea to stretch the use of your laminator pouches tfs
@Msicu1221
3 жыл бұрын
How awesome is this
@triciacarolkilbride2993
3 жыл бұрын
Oh my...that moth...absolutely stunning and those colours would be perfect for aquatic or mermaid themed dies. I am definitely gonna try the snow affect for my Christmas cards. Thanks again Ann xx
@carol-annemuise139
3 жыл бұрын
great ideas ty for sharing
@PositivelyPapercraft
3 жыл бұрын
You are so welcome!
@eagerhands1
3 жыл бұрын
Suggestion: Back your cut out which is topped with laminator pouch with a lovely variegated paper. It will make the openings in the wings colored without having to get out the pens.
@alisonmary1443
3 жыл бұрын
What a nice surprise to see a video today Thank you. Blue n green gilding flakes are gorgeous. Watching all these before I buy a laminator lol. When I use flakes etc I gently wipe things first with a tumble drier sheet but just make sure you like the smell cos it hangs around for ages.
@PositivelyPapercraft
3 жыл бұрын
Great idea x
@richardruark6422
3 жыл бұрын
Very creative....
@PositivelyPapercraft
3 жыл бұрын
Thanks a lot
@bommake1
3 жыл бұрын
beautiful
@rhra6288
3 жыл бұрын
I have one of those battery operated erasers, it might just find a place in my craft tool cart.
@JH-wd7ul
3 жыл бұрын
Oh Ann, the first project on black card was GORGEOUS! I have a love/hate relationship with black cardstock. I always have flecks of embossing powder (or in this case it would be gilding flakes) no matter how careful I am. (I would have to use watered down metallic paint to splatter the background to hide these. 🙄) The other projects are just as beautiful - love that layered butterfly die set! Thanks so much for so many ideas! Janet 🥰💕👍🦋
@PositivelyPapercraft
3 жыл бұрын
Thank you so much xx
@carriegrixti5482
3 жыл бұрын
beautiful videos as usual Ann....love the dragon fly on black card....xxx thankyou
@michelegourd5742
3 жыл бұрын
Ann, you are totally awesome!!! I love this kind of video!!! Thanks so much for sharing!!!
@PositivelyPapercraft
3 жыл бұрын
Glad you liked it!!
@created2bless322
3 жыл бұрын
Cool 😎 love this
@jackiejohnson7158
3 жыл бұрын
Thank you!
@ValTwineDeaner
3 жыл бұрын
Truly gorgeous Ann. Thank you again for another superb tutorial. You are a great tutor.
@PositivelyPapercraft
3 жыл бұрын
Thanks so much 😊
@lynnehill8635
3 жыл бұрын
That's a brilliant tip, Ann. Bless you!
@PositivelyPapercraft
3 жыл бұрын
Glad it was helpful!
@pumpkinpatchtigger
3 жыл бұрын
I have a question, couldn't you put the low tac tape on the back side in a hidden spot(using a small piece) and it be covered over by the laminate?? This would get rid of your small issue of the flakes sticking to the tapelines in the front I should think. Brilliant idea and lovely design!!
@ginatrevino5514
Жыл бұрын
For the sticky side maybe rub it with the embossing buddy
@Beezign
3 жыл бұрын
You could try a Swiffer sheet and it should take off the excess flakes. Awesome tutorial!
@Cards4Cancer
3 жыл бұрын
This is brilliant Ann, so many possibilities. Wow, All I have is gloss pouches so I need to get some matte ones for several projects. Thank you so much for sharing this.
@ArtsyGrandma
3 жыл бұрын
Thank for sharing these Ann, the one on the black card is truly magnificent. I have some clear pouches so will be trying out your other ideas soon.
@joanfriant211
3 жыл бұрын
Ty for this!
@margaretg2097
3 жыл бұрын
Firstly, I'd just like to remind everyone that the voting is still open for The Best of Crafts Awards 2021. Scroll down on the description to find the link and vote for Ann 😃 Ann, you have really started something in me!! I've even ordered the butterfly oops!! Another wonderful set of tips Thanks hun xx
@PositivelyPapercraft
3 жыл бұрын
Thanks for that! XXX
@pennygow1764
3 жыл бұрын
Thanks Ann, great ideas. I did a couple of ovals, circles, squares and rectangles today. ❤️
@PositivelyPapercraft
3 жыл бұрын
Wonderful!
@katydevitt586
3 жыл бұрын
Another winning video Ann ,great ideas again ,thank you ,going over to your blog right now !
@nancylourose
3 жыл бұрын
Put a piece of cardboard under the sequin pouch, just below the scrap paper. Then you have a way to move the laminating pouch without bending it
@gracebrunelle1
3 жыл бұрын
Wow wow, wow. I am amazed! Where can I get that eraser...makes a great difference. Thanks ever so much. I do not know if I could do as well. Well done YOU! Grace
@PositivelyPapercraft
3 жыл бұрын
I got mine from Simon Says Stamp x
@gemmalou101
3 жыл бұрын
More fab ideas I'll have plenty to try when I get back home lol those Aurora flakes are stunning 😍 xxx
@eileeno4624
3 жыл бұрын
I would suggest using heat tape for putting through laminator. It will be easier to remove
@PositivelyPapercraft
3 жыл бұрын
Never heard of it
@jeanwestackroyd2966
3 жыл бұрын
Thanks for sharing Ann, loving all these things.
@PositivelyPapercraft
3 жыл бұрын
You are so welcome!
@lindaeastment4542
3 жыл бұрын
HI Ann,👸 My Goodness Ann, you really have got your creative head on you have worked so hard to bring your wonderful ideas to your u tube channel thanks so much I really do appreciate all your hard work 👍✨ I Loved all of your projects thanks for sharing 👍. Looking forward to seeing what you come up with on Sunday Ann, as a very modest crafter I love u & your channel ✨❤️ Lin
@PositivelyPapercraft
3 жыл бұрын
Thank you so much Linda. Thank you for taking the time to watch my videos and leaving awesome comments xxx
@lindaeastment4542
3 жыл бұрын
@@PositivelyPapercraft HI ANN, I only leave a true & honest comment & I love your channel & what u do 👍✨❤️
@sharonhaughton-pearson2790
3 жыл бұрын
Would using an embossing anti-static pouch over the background paper help with stray flakes on the black card?
@amygiles4372
3 жыл бұрын
Fab ideas Hun X
@JoanOrloffDK
3 жыл бұрын
WOW amazing ideas Ann 🥰 I love the green, blue and silver colors, the snow effect is perfect and your tutorial ❤ thanks for sharing your creativity Hugs xx
@PositivelyPapercraft
3 жыл бұрын
Thanks so much! 😊
@marjd6524
3 жыл бұрын
If you place the item inside a piece of folded parchment paper, it won's stick to your laminator or allow any of the flakes to ruin your rollers.
@LadyAngel66
Жыл бұрын
I've only recently found your channel (I'm from the North East, too! 😊). I'm quite fascinated by your laminated project videos. I don't have a laminator as I mainly create sticker sheets, but I do use adhesive lamination sheets and was wondering if your projects would work with the sheets rather than using pouches with a laminator?
@PositivelyPapercraft
Жыл бұрын
Hi , I am not 100% sure but I think they have a good chance of working. Worth a try, surely 😉
@TD-bu9wv
Жыл бұрын
Have you ever made magnets like this? This is beautiful 21:01
@geminidream4347
3 жыл бұрын
Ann, I just had a thought that I wanted to run past you. Before you add the flakes, what if you used that embossing buddy on the card part after you run it through the laminator? Leaving the image alone as you want that to be sticky. Would this not take away a step of having to sand them off? And also make it easier to get the leftover flakes back in the container? I think I like the look of the flakes as they are, not run back through the laminator. To me, this looks more realistic. : ) Can you add a link to that eraser tool please, love it, as it would be easier on my wrists and hands. Then I have to hope I can find it here in Canada. LOL
@PositivelyPapercraft
3 жыл бұрын
Yes that may work :-)
@susankeller5557
Жыл бұрын
I wonder if an anti static powder bag would help on the black card before applying the gilding flakes?
@hartmanartsource
3 жыл бұрын
If you cut the outline of the moth out of a scrap of card, you could use that to mask the card as you apply your Aurora flakes. Then, perhaps, you would avoid any little crumbs or flakes sticking to the places you have taped.
@june-babyjane1
3 жыл бұрын
Oh these are great. I’m stuck with what I do next. The tin foil or laminator? Thanks Ann. 👏👏
Пікірлер: 273