Love this guy straight up talk no B's I think he's brillant should do more videos pure natural mrcvx top man
@adrianshjadesheehan9991
6 ай бұрын
That office is some job if the missus tell u get out you can always move in there 😂😂😂😂😂
@DinnyVaughan-qp9ut
6 ай бұрын
Great job on the tractor it takes serious time and effort to do it to that standard, its a labour of love but iam sure it will be worth it in the end.
@spannermonkey
6 ай бұрын
Flow factor, working width, disc type and application rate in the control box and drop point setting on the lever on the side of the machine(blue button) and adjust your telimat for boundary spreading and away you go. Drop point is doing the same as the old adjustable vanes. Someone already said about plugging in the 7 pin in cab to get forward speed so she adapts, faster you go the more she opens up. But you will need to do a 100m calibration first to set it to your tractor👍
@declanmcdonagh739
6 ай бұрын
The rally seat is a nice touch in the office. Well wear.
@cianlynchali
6 ай бұрын
Fantastic idea for painting the rims.
@dykehead1
6 ай бұрын
looking very smart the cs150, and the office
@raymondcarroll1670
6 ай бұрын
The settings on side of the Rauch Axis are for changing the drop point. To adjust the spread width with different fertiliser types
@casto-
6 ай бұрын
The cs150 looks tidy👌👍
@jonmv211
6 ай бұрын
You will need to get a speed reading to work the variable rate on the spreader. You can get it if the tractor has a 7 pin plug, or by fitting a speed sensor on the 4wd shaft of the tractor or from a GPS system.
@mrcvx
6 ай бұрын
Tractors have that
@raymondcarroll1670
6 ай бұрын
S4 discs will spread any width from 18m to 28m. That's what I use on my Axis
@petersutton2268
6 ай бұрын
Inside settings determine tge with width r12.5 for 24 m. It just determines where the fert comes out on the disk. Outside one sets quantities 82 for 1 bag at 14k approx. Ranch app is handy enough and fairly accurate. Obviously those settings depend on density of fert
@mrcvx
6 ай бұрын
Thank you
@Modlendingen
6 ай бұрын
The CVT is coming along nicely :) I guess that CS150 has spent some time with dual wheels on it, looking at the rear rims with the lip :) Is it coming from Holland/Belgium?
@mrcvx
6 ай бұрын
Came from France
@tomcrean492
5 ай бұрын
Office/Bar would have been handy during lockdown 😁😁
@spannermonkey
6 ай бұрын
Also mate, what control box do you have and i could email you a pdf copy of the ops book if you like 👍
@carolan_agriculture3376
6 ай бұрын
Would you know where I could get side skirts for a Steyr 9094 👍
@mikeysaunders7313
6 ай бұрын
I’ll take the A frame off the front mower please
@oisinmoore2227
6 ай бұрын
I think the suspension light on the dash stays one the whole time for the active front suspension as she can move up and down on a switch in the cab
@pj-fn1dv
6 ай бұрын
Nice office
@patrickkelly1055
6 ай бұрын
How do you strip the axle and tricky things for paint persume you don’t sandblast them ,
@mrcvx
6 ай бұрын
Sand them by hand
@patrickkelly1055
6 ай бұрын
Credit to you will be a super job when completed
@swilhare6815
6 ай бұрын
Would you source a particular tractor for a customer?
@kevincollins3039
6 ай бұрын
When will the invitations be out and is it bottles or draft
Пікірлер: 34