Back in the day, when the first after market axles became available from Henry's Machine in LA, they were 29 spline as I recall. They would twist badly, so we swapped them side to side after so many runs. At least they didn't break like stock GM axles would.
@barrywright1311
5 ай бұрын
Love the videos you guys do a great job and lord it’s good to see Randy rolling and winning and smiling
@philbetthauser9547
5 ай бұрын
Like the old saying, you snooze you loose. Keep grinding guys! 💪
@Final_Boss_Racing
5 ай бұрын
Hey John that glue for the driveshaft is 3M 8115 Bond
@strokermaverick
5 ай бұрын
Uncle Mike, is the man!
@freddiemoralez1536
5 ай бұрын
🎉🎉 makes sense the way you explained it🎉🎉
@jkfonyi
5 ай бұрын
Sweet you figured out how to turn caps lock off 🎉
@tomhamilton9140
5 ай бұрын
What a ride beautiful and fast. From Texas keep up the great work. 😎👍🇺🇸
@Tupaistella
5 ай бұрын
1.17 on 60foot..still not quick..wow what the hell you guys want more..this machine is fast bro..i cannot wait to see this car run more faster💪👍
@TurboJohnRacing
5 ай бұрын
We went 1.10, but need to go 1.06 on great surfaces.
@Jared45513
5 ай бұрын
"Thats normal right?" "If you aint bendin anything you aint leanin on it" lol
@TurboJohnRacing
5 ай бұрын
😂
@strokermaverick
5 ай бұрын
I, dont know much your racing but I hope the 28 spline pinion holds up.🙂 Be, safe!
@scotthall1215
5 ай бұрын
Put some ski's on the front of the Mustang. Measure to the lowest point weld a tube with 1/4 inch plate weld to it. Set it 1/8 of an inch lower than the pipe hitting. I'd grind the front edge to give it cleaner contact start
@scotthall1215
5 ай бұрын
Low rider channel problem is the best place to look.
@DarrellDwainWilcox-ey3mi
5 ай бұрын
Love your car Randy am Chevy man
@johnnyrouse2713
5 ай бұрын
Ok Thanks
@HughesWilliams-just-c
5 ай бұрын
It's nice to see randy smiling for a change lol
@robertdouglas3456
5 ай бұрын
That car is going to need wings next!🤩💪🤩💪
@Blain5700
5 ай бұрын
PMR to the front. Lets Gooooooooooo!! 💪💪
@russellridge8623
5 ай бұрын
LOTS of heavy rain in DFW area for last 12 hours and more coming. Hope it doesn’t get out your way during race time.
@TurboJohnRacing
5 ай бұрын
Rained out this weekend
@stacyparker1299
5 ай бұрын
Weld a strip of metal on the bottom of the pipes where they are scraping. It will act as a skid plate.
@strokermaverick
5 ай бұрын
When, will ya'll be at Coastal plains, Jacksonville, N.C.? I'd like to go.
@TurboJohnRacing
5 ай бұрын
Canceled this weekend.
@lukeb.8478
5 ай бұрын
Hi hope it can hang on for a pass or 2
@crazyhorseracing6130
5 ай бұрын
Those brakes are cool looking but I can't see double price compared to the other tried and true brands.. Wilwood, Strange and Areospace. The zero drag is awesome but $800 more than everybody else.. That very little drag that most brakes have for a split second, can't be hurting 60 foot or total ET as much as spending that much more money. Just my opinion
@michaelwynne4346
5 ай бұрын
Time for a Lock-up.
@dannylee9138
4 ай бұрын
Do you machine your rotors
@jkfonyi
5 ай бұрын
When did Adam lambert quick singing and start building bad ass shocks ?
@TurboJohnRacing
5 ай бұрын
😂
@christophergriffin8344
5 ай бұрын
Im betting it's some type of epoxy adhesive🤘
@johnnyrouse2713
5 ай бұрын
I didn't ever hear what kind of gear you were running to start with heard that you put in a 389 what was in there before
@TurboJohnRacing
5 ай бұрын
3.70
@garywoodward847
5 ай бұрын
Looks killer sitting lower
@Smokey72013
5 ай бұрын
Did you intentionally leave your driveshaft sensor ring off the pinion yolk
@TurboJohnRacing
5 ай бұрын
Yes
@austinsmith7750
5 ай бұрын
Let's Gooooooo
@rgroller4683
5 ай бұрын
Raccoons aren't very pleased right now!!
@FULLBLOWN03
5 ай бұрын
What gear was in it?
@TurboJohnRacing
5 ай бұрын
3.70
@tylerschmitt1921
5 ай бұрын
John you going to be at war in the woods
@TurboJohnRacing
5 ай бұрын
No, not gonna make it.
@cassowaryind
5 ай бұрын
Your bolts on the back of the track rods are too short and the lock nuts may as well not be on there as there is no thread for them to lock onto
@98Z28LS1
5 ай бұрын
I bet Randy played college football.
@charlesfort3781
5 ай бұрын
He played pro football
@jerryburks2755
5 ай бұрын
What engine is in that mustang
@danmyers9372
5 ай бұрын
Small block Ford.
@jerryburks2755
5 ай бұрын
@@danmyers9372 427 small block ford hell yeah
@treyivey5431
5 ай бұрын
Just cut a coil of the spring
@damianlindsey6177
5 ай бұрын
This is a multi hundred thousand dollar race car, not some civic with a fart can owned by a kid. Cutting a coil off of these drag racing springs will ruin them. They are designed for the specific compression height with the coilover. But go ahead, cut a coil off your 1000 dollar or more each Penske coilover. Smh
@jamesdavis4859
5 ай бұрын
Make it faster
@bfromthed
5 ай бұрын
Pretty sure Mike hill cancelled already
@hoost3056
5 ай бұрын
Ok, lessee.......3000 herspers and it's NOT fast enough? It's a 3 second car if the chassis gets sorted and Randy stays in it. Should do a record......3.60s
@wi5i413
5 ай бұрын
3.60s is a stretch that would be a top of the pack 275 car…3.90s is where im assuming the PB is but usually its a 4.0 - 4.1x car
@terroristcam
5 ай бұрын
@Turbo John watch Beater Bomb mustang roll out! He flying 🥇
Пікірлер: 57