👍👍👍 great idea. Making things easier.....think you
@ATS357
2 ай бұрын
You are welcome. Love working smarter, not harder😉
@christinamoneyhan5688
6 ай бұрын
Thank you, best tip I have ever seen for this issue.👍👍👍🇺🇸🙏🏽✌🏻✌🏻
@ATS357
6 ай бұрын
Right on!
@michaelgarner9816
Жыл бұрын
A simple trick but pure genius.
@ATS357
Жыл бұрын
Thank You, it was definitely a light bulb moment!
@Paladin1873
2 жыл бұрын
Now that was clever. I'll have to try it the next time I strip down a 500/88 for repair.
@kevin00714
8 ай бұрын
I've never had a problem with a 590A. Cleaned a friends little 500E 410 and the magnets were most helpful. Thanks!
@ATS357
8 ай бұрын
I am glad! A small thing with such a profound effect.
@Z7d3nR4
2 жыл бұрын
Thank you. I have two of the 500's, and will be happy to use this simpler method for reassembly.
@ATS357
2 жыл бұрын
You are welcome. I like to work smarter not harder when I can :}
@user-wd1vd9du2q
4 ай бұрын
Great informative video!
@ATS357
4 ай бұрын
Thank You!
@recklessrey5924
3 ай бұрын
I’ll be honest I did this earlier this morning. I just use my big old thumb and put it in between those two bars. Keep them on place.
@ForgetU
8 ай бұрын
Great idea about using the magnets. I think I used a waded-up paper towel.
@danielhardwick-mf3xr
Жыл бұрын
This totally cleared the issue I had with those two side bars, Thankyou!
@ATS357
Жыл бұрын
You are so welcome!
@marklanders9649
Жыл бұрын
Thanks ! I have 2 mossbergs , what a great idea. such a simple solution...DUH !
@ATS357
Жыл бұрын
Thank you. I love it when there is a simple solution to a big problem.
@Samos900
Жыл бұрын
Did this yesterday, thank you!
@ATS357
Жыл бұрын
You are welcome.
@skywalkerimperial4350
8 ай бұрын
Nicely Done!
@ATS357
8 ай бұрын
Thanks!
@billmitchell7785
10 ай бұрын
Wow. Love the magnet trick!
@ATS357
10 ай бұрын
Thank you 😀
@josephdurchholz8771
11 ай бұрын
Awesome video
@ATS357
11 ай бұрын
Thank you, 😊 it was one of those light bulb 💡 moments.
@sirayum
2 ай бұрын
Wow 👍
@mikeisanisland
4 ай бұрын
Brilliant.
@ATS357
4 ай бұрын
Thank you😊 Sometimes, the light goes on, and I get a bright 💡idea.
@copperhead2534
Жыл бұрын
Just stuff a paper towel, or glove, rag etc forward of the trigger pack, when setting the trigger housing.
@PlugNuster
2 жыл бұрын
Good idea if you aren't very nimble with your fingers. I have been taking apart my 500 and 590a1 for years and never had an issue holding those parts in place. Practice makes perfect I suppose.
@davidma6616
5 ай бұрын
Great tip!
@ATS357
5 ай бұрын
Thanks for watching!
@KodaMink
7 ай бұрын
2:55 I have been trying to get my trigger assembly back in my mossberg for 3 days now. I believe the safety pin is catching on the square metal piece beneath it, what do I do? I’ve watched countless videos and it’s like I’m the only person who’s experiencing this issue
@ATS357
7 ай бұрын
If it's the safety on top, not a cross bolt, the safety has to be either on safe or fire, I can remember at the moment. Try it both ways. One of them should work. Let me know if that works.
@KodaMink
7 ай бұрын
@@ATS357 I had a friend help me with it. Turns out the cartridge interrupter and the stop were in fact the issues behind all of it which is crazy because I would press both as hard as I could to the sides and it still didn’t do the trick. I figure it’s one of those things where it matters more about the points of pressure rather than pressure itself.
@ATS357
7 ай бұрын
Glad you got it. Yes they have to be just right in order to get the trigger group back in place.
@ifuentes390
Жыл бұрын
Thanks!!!!
@ATS357
Жыл бұрын
Welcome!
@juliogonzo2718
Жыл бұрын
This is great! Thanks for the awsome idea
@ATS357
Жыл бұрын
You are welcome Julio.
@chriskellas2902
5 ай бұрын
super cool trick!
@ATS357
5 ай бұрын
Thank You.
@59jkappelman
Жыл бұрын
My problem is just before that. Thr bolt, carrier, and shell lifter are all stuck in the forward position. I can't get the 3 parts unstuck from each other.
@braydenodom3876
4 ай бұрын
I’m having the same issue have you found a way to fix it
@alfredtafoya3937
2 ай бұрын
Me too!!
@YY-zw2ec
Жыл бұрын
I have problem with my Mossberg 590. When I shoot and don't hold strongly the forearm, the bolt moves on its back position by itself and ejects used round but I doesn't have a new round from magazine tube on the elevator. What's wrong with it ?
@ATS357
Жыл бұрын
That is a good question. I sorry I don’t know the answer to that. Maybe someone else will see this and have an answer .
@noot5693
Жыл бұрын
I have an 88 and the internals are frankly the same across the 88/500/590 system. You just need to fully pull the pump back because the arms have specific cuts for the order of operations, the shotgun can eject a spent or live shell without feeding a new one in literal fractions of an inch difference
@goldenfox334
5 ай бұрын
tbh i put grease on mine to hold it in place because thats what i was shown with car parts. figured what could it hurt sense its not a semi auto where stuff has to cycle on its own lol
@ATS357
5 ай бұрын
Well that would work, the problem is you would have dirt and gun powder sticking to the grease and gumming up everything. In my opinion.
@dennykurzawski3690
Жыл бұрын
GREAT IDEA!!
@ATS357
Жыл бұрын
Thank you Denny!
@joegarrison2344
Жыл бұрын
Brilliant!
@ATS357
Жыл бұрын
Thank you :)
@jerrybigrig9475
2 жыл бұрын
Slick ..thanks ..👍👏🤭
@denzilvenske6315
Ай бұрын
Very clever.
@ATS357
Ай бұрын
@@denzilvenske6315 Thank you.
@axiomaddict
2 жыл бұрын
Pretty cool!
@tylerdesautels1857
2 жыл бұрын
Oh I like this 👍👍👍
@ATS357
2 жыл бұрын
Thank You!
@kencoffelt
9 ай бұрын
Schematics for the 500e 0:38
@EricLDC
2 жыл бұрын
Can I sell one after I put it back together? It's not stolen just got in a trade I know the guy he's no thief. Just asking if it's legal to sell. Not sure why it wouldn't be but you know the atf these days...
@grizz23
2 жыл бұрын
Check your state regulations on how to sell a gun I don’t think taking it apart will have any affect
@paulnelson4425
Жыл бұрын
private sales are just that- private.
@CalebDowning
2 жыл бұрын
Hey, that’s pretty clever 🤔👌
@ATS357
2 жыл бұрын
Thank you😊
@DavidRobinette-xk2iv
Жыл бұрын
Or you can simply use a dab of grease to hold the two in place
@ATS357
Жыл бұрын
You could do that, but I am not one to use grease or a lot of oil. The grease will attract dirt, unburned gun powder and carbon. In my opinion.
Пікірлер: 77