This build was the reason I subscribed nearly 2 years ago so I'm glad you're back at it and looking forward to see it come alive.
@TWAMotorsports
Жыл бұрын
Gonna be changing a few things but hopefully it will happen quickly
@kenthomann8047
Жыл бұрын
You are the man!! Thats some serious work for one person to do by themselves, let alone trying to video it. 👍👍👍👍👍
@TWAMotorsports
Жыл бұрын
It is a pain but may be changing directions
@anthonyhaupt4847
Жыл бұрын
It's in cool deal. I'm looking forward to more videos on the project. Thank you. We have been waiting for this for a long time!
@TWAMotorsports
Жыл бұрын
And we may be changing directions
@warrenstearns9068
Жыл бұрын
Finally back on the reason i followed you originally, that and your in the midwest, i graduated from Ofallon IL, so not too terribly far from your stomping grounds
@TWAMotorsports
Жыл бұрын
Yeah but a complete change up coming
@transam4555
Жыл бұрын
Happy to see this build coming together again. I have a buddy who did the setup on his back in his garage. At least I got to see more or less what's involved. Definitely will consider this as a future project.
@TWAMotorsports
Жыл бұрын
Definitely lots of work and now I am changing directions
@BrettAirsun
Жыл бұрын
Going Procharger?
@TWAMotorsports
Жыл бұрын
Thinking so
@transam4555
Жыл бұрын
@@TWAMotorsports interesting 🤔
@markb3129
Жыл бұрын
👏🏻major steps accomplished on the TA. Some things are worth the wait. ✌🏻
@TWAMotorsports
Жыл бұрын
Completely changing things up soon
@markb3129
Жыл бұрын
@@TWAMotorsports just more videos for us to watch. ✌🏻
@TWAMotorsports
Жыл бұрын
This is true
@GMCJay_lly
Жыл бұрын
Love all the T/A and gmt800 content. Keep em coming!
@TWAMotorsports
Жыл бұрын
Thank you
@bizzylife-cy2re
Жыл бұрын
Love to see the TA getting closer to the first fire up, always looking forward to the next part of the build !
@TWAMotorsports
Жыл бұрын
Thank you but a complete change up is coming
@bizzylife-cy2re
Жыл бұрын
@@TWAMotorsports I just read the comments, I've been mirroring you as I'm doing the aps on my 02 trans am as well. Thats too bad but thank you for getting me this far !
@TWAMotorsports
Жыл бұрын
Good luck on yours. If you know of someone interested I will be selling this one.
@DaveG1963
Жыл бұрын
Travis preparation is the key to success! Sounds like you have a plan. Anything worth doing is worth taking your time as you’re doing, keep up the good work.
@TWAMotorsports
Жыл бұрын
Thank you. While I think I am changing directions now I am still focused on getting it running soon.
@UPPER_CASE_C
Жыл бұрын
I clicked this video so fast, I commented before you finished your intro.
@TWAMotorsports
Жыл бұрын
Lol. Things may be changing again
@gregorygoins108
Жыл бұрын
Been waiting on this a long time. I have a camaro I’ve had 24 yrs, love these 4th gens.
@TWAMotorsports
Жыл бұрын
I do love the 4th gen cars.
@anthonywagner3273
Жыл бұрын
I really really like this Trans Am project. Being a Trans Am owner myself. And Travis I really love your attention to the details, that's what is making that project that much better. Cause so far the whole engine looks factory and rather a sleeper. I guess until the intake piping starts to go on. Keep up the great work and I'll be following along the whole way. PS maybe before your next big project starts a two post lift might be a wise project lol.
@TWAMotorsports
Жыл бұрын
Thank you. I definitely need a 2 post lift. Also this may be changing directions soon
@Superkid778
Жыл бұрын
A red car video🙌🏻🙌🏻🙌🏻 awesome job 👍🏻👍🏻👍🏻👍🏻👍🏻
@TWAMotorsports
Жыл бұрын
Thank you
@aag6499
Жыл бұрын
Awesome news Mr Travis. That engine is prettier then my wife 😂😂 jkd....
@TWAMotorsports
Жыл бұрын
Lol
@Wrensspeedshop
6 ай бұрын
Also, one thing I ended up going with I know this video is a little older. Now is ICT billet makes two adapters that you bolt onto each side of the block and that’s where you put your knockers that way you can put a flat valley you have to extend the wiring harness for your sensors, but that’s easy since it’s only two wires blew and green.
@TWAMotorsports
6 ай бұрын
Yeah I'm not sure if they will fit with manifolds
@keilylmm6377
Жыл бұрын
Work in progress... Coming along nicely.. 👍
@TWAMotorsports
Жыл бұрын
Thank you but probably doing a change up soon
@hiimjustinw
Жыл бұрын
FINALLY!!!
@TWAMotorsports
Жыл бұрын
And now to pull it all back apart. Changes coming
@estebansantos7314
Жыл бұрын
Best car KZitemr. Never had a father figure so watching these videos motivated me to buy my own 4.8 and wrench on it
@TWAMotorsports
Жыл бұрын
Thank you. I appreciate that
@Wrensspeedshop
6 ай бұрын
Have you had a chance to ace to drive yours or another TA with the Huron twin setup? I’ve got mine ordered from Jon right now, just waiting for it to get finished up and shipped. We combined one of his single and twin setups for my TA build.
@TWAMotorsports
6 ай бұрын
I haven't. Sold the kit
@briantt5690
Жыл бұрын
You have skills man. Are you or were you ever a full time mechanic?
@TWAMotorsports
Жыл бұрын
Thank you. No just like to play
@carminedurso7790
Жыл бұрын
Fantastic work. Going to tackle tubular k member install. Could someone tell me the part # for the brake line clip that is attached to the k member where the flexible brake line meets the hard brake line.
@TWAMotorsports
Жыл бұрын
Doubtful it is still available
@carminedurso7790
Жыл бұрын
@TWAMotorsports I'm not surprised but any info on part would be helpful.. And thank you for all you hard work with the videos. You have inspired me to take on projects on my 02 ws6 and bond with my son. I am by no means a mechanic and your videos are my #1 sorce of information... Thank you.
@TWAMotorsports
Жыл бұрын
Thank you. Truck a wrecked one online or hawksthirdgen
@jamessowder193
Жыл бұрын
This is the first time watching anything about the build. I've been subscribed to you, this is the first notification I got for some reason 🤔. Anyway, what mm turbos are they? How much boost you plan on putting to her?
@TWAMotorsports
Жыл бұрын
Thanks for subscribing. They are 6266 turbos but I am removing this kit now and going a different direction
@michaelm3381
Жыл бұрын
Trans am! Thank you!
@TWAMotorsports
Жыл бұрын
Lots to come with more surprises
@BrettAirsun
Жыл бұрын
I have this kit on my 2002 Camaro SS, 62/66 turbos, custom built 6.0L etc…. I love the power it makes with the turbos but a complete pain in the A$$ to work on and I have a lift. I will stay turbo next time my engine has to come out but will definitely going to a single turbo set up
@TWAMotorsports
Жыл бұрын
I totally get that. Exactly why I am changing directions soon
@jeffgraham48
Жыл бұрын
My 08 short bed I didn't put power steering cooler on it and it make noise in summertime just driving it normal.
@TWAMotorsports
Жыл бұрын
I may end up doing one.
@benrose1713
Жыл бұрын
Are going to put a catch can on it?
@TWAMotorsports
Жыл бұрын
Yes
@Brad_O_M
Жыл бұрын
You could have turned the engine 90 degrees while hanging and slid the K in between the legs then lowered.
@TWAMotorsports
Жыл бұрын
Wasn't high enough
@mohammedal-maskary8202
Жыл бұрын
great content as usual travis ... would this car pass emissions in MO
@TWAMotorsports
Жыл бұрын
Thank you. No I don't believe so
@jasondoyle355
Жыл бұрын
Finally!!!
@TWAMotorsports
Жыл бұрын
May change it up on you.
@nicotoscani8270
Жыл бұрын
@@TWAMotorsportsWhat does that mean?!?
@TWAMotorsports
Жыл бұрын
Turbos are not gonna happen. Not willing to cut anymore stuff. Don't want a racecar. Motor and transmission will be staying though
Пікірлер: 75