Thanks you sir for the first time ive found motor tutorial videos in English ❤
@windertrucker6230
4 ай бұрын
You’re welcome.Thank you.
@sunnypanchbuddhe576
Жыл бұрын
Thank you sar kalar kod is best fharmula explain thanks
@harishharikumar1543
2 жыл бұрын
Hey man am back, got new headsets,, yeh this is so usefull for beginners to learn 9 lead motors, its common in middle east but in india its rare, there they design for star delta. When i started in 2014 i saw 9 leads and 12 leads thought heck!!! am never gonna learn it😂😂, i liked the tag flew with the pully but be carefull, i almost lost one finger 2 year back, its kind of half bent right now,
@windertrucker6230
2 жыл бұрын
Great.this is not very often leads of motor i did rewind couple motor since i started working here,just want to share if anybody new winder will be seeing those leads something to have an idea how to do it.I was surprised tag was attached on the pulley sounds like funny lol but that was unsafe.Yah i should put that in my safety meeting slip it’s unsafe.be careful bud we don’t wanna lose our finger can’t rewind without it.Take care always.
@maskurikuri-qz2to
Жыл бұрын
Wao ,good,rewending super power master.
@windertrucker6230
Жыл бұрын
Thank you...
@mohdshaban6185
Жыл бұрын
Sir plz make A vidio for Singal phase 3 speed motar winding
@shanielectric319
8 ай бұрын
Good
@mirali7230
2 жыл бұрын
Very good sir
@windertrucker6230
2 жыл бұрын
Thank you 🙏
@jovesantos3747
2 жыл бұрын
ka-winder, pki-upload nman ng hi-pot test tapos, pki-explain na rin,,, Salamat, ingat. MORE POWER to you and GOD BLESS.
@windertrucker6230
2 жыл бұрын
Cge gawan ko ng content pre para syo.
@KalegeJackson-we1di
Жыл бұрын
Yeah, nice and good sir
@windertrucker6230
Жыл бұрын
Thank you.
@nelsonpantaleon7751
2 жыл бұрын
Iniisip ko sir yung sinabi nyo na sa winding at rpm malalaman ang posistion ng winding sa loob motor kahit ndi na layout sa papel . SA LAP sir ok lng at sa 3 layer na concentric madali makita sir kaso nalilito ako sir sa single layer at 2 layer na windings pasensa na sir panay tanong ko kasi nainspired ako sa pag rewind nyo sir ang galing nyo kasi sir sobra ndi nyo na need layout sa papel
@windertrucker6230
2 жыл бұрын
Parehas lng ang layout ng full slot na coil tapos 2 layer yong iba hinati lng yong wire kasi para ma compact yong winding para kumasya sa slots.ok lng basta antay lng kunti ng sagot kasi baliktad ang oras natin umaga nyo jan gabi namin dito at pag busy sa trabaho 2 weeks na yong huling upload ko d ako mka upload aobrang busy sa work pasensya na
@nelsonpantaleon7751
2 жыл бұрын
@@windertrucker6230 ok sir salamat sir basta gawin ko na lng sir yung sa concentric na motor yung sabi nyo sir na unahin ko ilagay yung lahat ng phase A then B then C para ndi ako malito sir sa paglalagay ng coil group sa loob ng ng motor stator salamat ng madami sir hangang ngayun pinapanood kopa videos mu sir salamat tlaga ng madami
@windertrucker6230
2 жыл бұрын
@@nelsonpantaleon7751 ok lng yan walang problema basta kung may tanong ka comment mo lng.
@saitulmehtavlog
11 ай бұрын
Super wayding ❤
@emmantoyzblogz4842
2 жыл бұрын
Nice job Po master
@ucandoit5398
2 жыл бұрын
Heyyy my friend Rasil ,mind blowing ,really u r a great technical guy
@windertrucker6230
2 жыл бұрын
Thank You very much my friend,you’re awesome guy.Appreciate it.😊
@omanelectrical2081
2 жыл бұрын
You are master Broo Excellent Explain With Diagram Thnxxxxxxx
@windertrucker6230
2 жыл бұрын
You’re welcome bro,thank you very much.
@nanasahebpaul435
2 жыл бұрын
Important video sirji 😎🥰
@windertrucker6230
2 жыл бұрын
Thank You bro😊
@jacklyresulta7437
2 жыл бұрын
Nice one sir🙂 galing nyo po talaga👍🙏
@windertrucker6230
2 жыл бұрын
Thank You Jackly 😊
@MDSUJON-mu9jv
Жыл бұрын
Good work ❤
@windertrucker6230
Жыл бұрын
Thanks 😊
@MDSUJON-mu9jv
Жыл бұрын
@@windertrucker6230 Sir can i get a chance to work with you please sir
@MDSUJON-mu9jv
Жыл бұрын
@@windertrucker6230 wollcome
@binuvarghese696
2 жыл бұрын
Very good work
@windertrucker6230
2 жыл бұрын
Thank you 😊
@sohelkumthe.8510
2 жыл бұрын
very nice work who is the RPM two speed motor 9 lead wire supply to connection plat.
@windertrucker6230
2 жыл бұрын
Thanks,it’s single speed dual voltage 1720 rpm
@sohelkumthe.8510
2 жыл бұрын
@@windertrucker6230 9 Leads connection plat stater to motor Digram.
@a1motarvayding428
2 жыл бұрын
Your working hard
@windertrucker6230
2 жыл бұрын
Yes i am my friend spare time still put at wirk👍
@omanelectrical2081
2 жыл бұрын
MUST BE upload all videos I wait for your videos
@windertrucker6230
2 жыл бұрын
Lots if videos bro but need time to work.
@SuhailAnsari0007
2 жыл бұрын
Hello bro what is your from?
@windertrucker6230
2 жыл бұрын
Hi Bro.From Philippines working here in Canada..
@SuhailAnsari0007
2 жыл бұрын
Lovely works bro
@SuhailAnsari0007
2 жыл бұрын
Very good videos
@windertrucker6230
2 жыл бұрын
Great..Thank you..Have a nice Day.
@SuhailAnsari0007
2 жыл бұрын
@@windertrucker6230 welcome
@SuhailAnsari0007
2 жыл бұрын
how many years have you been working in canada.
@windertrucker6230
2 жыл бұрын
@@SuhailAnsari0007 almost 7 years
@SuhailAnsari0007
2 жыл бұрын
Great bro.
@doran1920
2 жыл бұрын
Hello master How are you? It was usefull Thank so much
@windertrucker6230
2 жыл бұрын
You're always Welcome Bro.Thank you Keep safe and to Your Family..
@doran1920
2 жыл бұрын
@@windertrucker6230 thank you bro👍👍👍😍😍😍
@ARIYANTO0601rewinding
2 жыл бұрын
how many poles is that dynamo ?
@windertrucker6230
2 жыл бұрын
4 poles mate
@naselectrical5226
2 жыл бұрын
Haiii brother please make a video of 7.5TON COPELAND COMPRESSOR (3 STAR)
@windertrucker6230
2 жыл бұрын
Hi bro,haven’t seen yet copeland compressor sorry but if have one for rewind it will be uploaded to my channel for sure.thanks
@nelsonpantaleon7751
2 жыл бұрын
Single layer winding lap to diba sir sir pde ba sa ganitong type ng motor pepede ko ba na ilagay lahat sa slot ang lahat ng phase A tapos sunod ko phase B then phase C maari ba yun sir o need talaga isa isa like ABC,ABC,ABC,ABC hangang ma completw yung 4 pole salamat sir
@windertrucker6230
2 жыл бұрын
Single layer lap pasok ng wire phase A sunod phase B then phase C then phase A ulit phase B then phase C sunod sunod yan pag lap sa concentric pwede phase A muna lahat ipasok na coil then sunod Phase B lahat then Phase C.kung bago ka sa rewinding pag napasok muna lahat yong phase A at kung series connection lang i connection mo na bago mo umpisahan yong phase B para dkna malito pagkatapos mo ma rewind ang motor.
@nelsonpantaleon7751
2 жыл бұрын
@@windertrucker6230 salamat sir 🙏
@windertrucker6230
2 жыл бұрын
@@nelsonpantaleon7751 you’re welcome
@maskurikuri-qz2to
Жыл бұрын
Maaf master,motor ini kegunaannya buat apa ,kalau boleh kami tahu?????? ,Terimakasih banyak,tapi saya lihat penyambungannya seperti maknet generator,model paralel Doble,10-11-12,untuk gron( netral)
@windertrucker6230
Жыл бұрын
It’s for machine shop motor like lathe machine
@maskurikuri-qz2to
Жыл бұрын
@@windertrucker6230 terimakasih banyak master
@maskurikuri-qz2to
Жыл бұрын
@@windertrucker6230 super power and speed master,
@prodigy8248
2 жыл бұрын
Sir... Pagdating po sa tracing ng starting leads at ending leads, Pwede ba na gawing palatandaan na ang nakaharap sa labas ay start at ang end ay nakaharap sa loob??? Anu po ba ang tamang gawin para malaman ko alin sa coil ang start at end???
@windertrucker6230
2 жыл бұрын
Both ways pwede kung yong nakaharap sa labas kung gusto mo start lahat pwede at end naman yong lahat nakaharap sa loob.Pero sa akin mostly yong labas ang lagi kung start mas madali para sa akin mag trace ng connection karamihan kasi na original factory connection nakaharap sa labas ang start.
@windertrucker6230
2 жыл бұрын
Pag nag trace ka lalo na kung walang numbering or label yong lead wire kung 4 poles gumawa ka ng drawing na 4 na set ng coil tapos i trace mo yong bawat connection ng coil sa drawing para dka malito pag mag connection kana pagkatapos mo mag rewind kasi pag nabaklas mo na yong dating rewind dmo na mababalik yan kaya advice ko lage sa kasama ko gumawa ng diagram ng original connection bago baklasin yong old rewind para d maagka problema pag mag connection na pagkatapos ma rewind.
@prodigy8248
2 жыл бұрын
@@windertrucker6230 ah ganun pala yun. Salamat at napansin mo na naman ang tanong ko sir. At salamat dahil hindi kayo nagtitipid ng isasagot,. 👍
@windertrucker6230
2 жыл бұрын
@@prodigy8248 you’re welcome 🙏👍
@ashernajmi
2 жыл бұрын
audio quality not satisfactory plus the background noises.
@windertrucker6230
2 жыл бұрын
Sorry noise is always around the shop couldn’t stop them from working.
@jacklyresulta7437
2 жыл бұрын
Nice one sir🙂 galing nyo po talaga👍🙏
@windertrucker6230
2 жыл бұрын
Salamat Jackly,basic connection lahat magaling jan pati ikaw kayang kaya mo yan👍
Пікірлер: 78