Thank you! I really appreciate your taking the time to make this video. It fixed my exact problem, and for only a few pennies worth of epoxy!
@Plain-Ole-Chuck
9 жыл бұрын
Thank you ..thank you .. thank you .!! My motors been giving me fits. I thought that indicator was one piece.. been blaming the rack case screws for coming loose and letting the gears jump teeth. put oversize screws and extra wire ties on it and it did it again today.. So simple .. and right in front of my eyes !!!
@neemer32
9 жыл бұрын
Haha!! That's great! So happy my video helped someone! Happy Fishing friend!
@Plain-Ole-Chuck
9 жыл бұрын
Now to address the break -away mount that breaks away constantly. Going to try and add some star washers under the knobs.. can never get them tight enough.
@rickeygrindle8890
5 жыл бұрын
Thanks for sharing your information was very helpful I have the same problem with a motor guide so out to shop for a repair
@fishingismydrug1
5 жыл бұрын
@@Plain-Ole-Chuck did you figure out how to keep it from constantly breaking away?
@Plain-Ole-Chuck
5 жыл бұрын
@@fishingismydrug1... Well yes and no..lol I put the star washers under the knobs and it seemed to help. I think part of my problem is the shaft on the motor is too long for my boat and I'm running it too deep in the water. I think this gives it a lot of leverage when I change directions or bump something. Going to play with height a little this year and see if that helps. Didn't fish much last fall.. hopefully that will change this spring. Boat's in getting new seals in the lower unit now.
@NeilGraham.I.M.F
Жыл бұрын
Never wanted a MotorGuide never had any experience with one. Bought a boat yesterday that has a 10 month old MotorGuide trolling motor on the bow. And the guy told me sometime the arrows left and doesn't line up with where you're going and it nearly caused a giant problem on my maiden voyage today. Hopefully this will fix my problem though it's a different model than the one I have. Thank you for the information
@Havocxsc
9 жыл бұрын
Very nice same problem with mine very informative thank for uploading!!
@KM-pp4je
4 жыл бұрын
Can you replace the gear without gluing it together? If so, how much do they cost? Thanks. Great video, very helpful.
@johnclason8229
Жыл бұрын
$2.92
@JimNobles-gv4ky
2 ай бұрын
How to wire LED lighted Directional indicator light????
@barryarsenault4293
5 жыл бұрын
Steel Wool should work. Used it on stripped bolts many times.
@larry8890
8 жыл бұрын
Take the top off and jamb a bunch of broken toothpicks in where the gear is stripped,then put back on.
@kennethwood713
2 жыл бұрын
you must be from the south, so am i
@denoc817
3 жыл бұрын
I fix it with half a piece of scotch tape. Error functions as it is new
Пікірлер: 17