🔔SUBCRIBE NOW! 👍 n9.cl/zr56
💖DONATE 👩👩👦😀
If you want to support the channel to continue creating quality and free content for all our followers.
✅https: //www.paypal.com/biz/fund? Id = G6WJA95UCVHBG
When the pieces are very long (the overhang of the piece is greater than 8 times its diameter) or thin, they are fixed between the point, the tailstock and the bezel. The steady rest prevents the piece from flexing under the thrust of the tool or as a consequence of its excessive length. They usually have 2 or 3 support points, and the rests can be mobile or fixed. As in the tie-down between points, a tow dog is used.
Before assembly, the piece must be faced and pointed on both sides, in order to support the point and the tailstock.
As it is not a very robust mooring, it is used above all for finishing rolling.
Advantage:
Perfect centering is obtained.
The part can be assembled and disassembled without losing concentricity.
Disadvantages:
The bezel and towing dog can mark the machined surfaces of the part.
The assembly is quite laborious.
👇🔽🔻⏬🔔🔶 🔷 🔸 🔹 🔺👇
🙏Thank you for watching our videos.👨👨👧👧 👩👩👦😎😍
미쓰비시 PLC (MELSEC), 지멘스 (SIEMENSE) PLC, PROFACE HMI STUDY
미쯔비시 PLC MELSEC, 생산 자동화 기능사, 생산 자동화 산업 기사, 메카트로닉스 기사,
로봇, 6 축 로봇, 산업용 로봇, ABB 로봇
❤️ ⚠️ ⚡ 🚀
👉Subscribe to the channel✅🤣
/ @reynermairena1
👉Follow us: ✅🤣
Facebook FanPage:
/ aprendamosjuntosenlaes...
👉WhatApss Group✅🤣
chat.whatsapp....
👉Twitter✅🤣
/ mairenareyner
👉Linkedin✅🤣
/ reyner-mairena-57aa44190
👉Instagram✅🤣
/ mairenareyner
👉VK✅🤣
vk.com/id55925...
👉Tumblr✅🤣
www.tumblr.com...
❤️ ⚠️ ⚡ 🚀
👌 #technology #tech #tech
👌 #Maintenance #Industrial
👌 # Reyner🎦👌
Негізгі бет 💥Mounting between centers with Drag Shock and Drag Dog in Parallel Lathe
Пікірлер: 24