The adhesive that works best is Scotch Photo Mount Permanent Adhesive www.amazon.com/Scotch-Photo-Photo-safe-Adhesive-6094/dp/B0009GXMJG/ref=sr_1_1?crid=3H9CBAP6KZIBS&keywords=scotch+photo+mount+spray+adhesive&qid=1553567591&s=gateway&sprefix=scotch+photo%2Caps%2C132&sr=8-1
@maureenbaril8813
3 жыл бұрын
That was EXCELLENT! You can save a lot of money that way instead of buying UArt Boards ! LOVE LOVE your Style Nancy!! Superior Job ! Maureen
@nancynowak4023
3 жыл бұрын
Thanks, Maureen!
@sharonmayeux7965
5 жыл бұрын
Thank you for the tutorial, Nancy. I love your work and your generosity as an artist! BTW, a special glove has been created by quilters Fons and Porter to wear on your ruler-holding hand called the Klutz Glove, so that if your knife does slip you can be spared a painful trip to the ER.
@nancynowak4023
4 жыл бұрын
What a great idea! Thanks, Sharon!
@BethanyFields
5 жыл бұрын
I LOVE seeing this and especially your amazing space, work tables, and studio! So much space and so clean. Love it!
@nancynowak4023
4 жыл бұрын
Thanks Bethany!
@GailSibleyArtist
4 жыл бұрын
Nancy this is AWESOME!! Thank you so much for this. I'll make sure to direct any HowToPastels subscribers when they need this info!!
@judiburnett6527
2 ай бұрын
Thanks for the lesson. I needed that.
@karenmaddern3870
2 жыл бұрын
So helpful and easy to understand. Thank you so much from Australian PStel Artist🦋🤗
@juliebabb3365
5 жыл бұрын
Wonderful to see you again Nancy. I really enjoyed the workshop you & Karen did together! Beautiful painting!
@Carem44
5 жыл бұрын
THANKS NANCY. You have saved me hours of tedious work and money. Great Video.
@harleytalkington7700
5 жыл бұрын
This taught me a lot about how to upgrade my cutting practice.
@aliciamolloy5948
7 ай бұрын
Thank you Nancy!
@BabsHaake
4 жыл бұрын
Thank you so much for that great tutorial Nancy. I bought the supplies and am ready now to do the same. By the way, your painting looked absolutely gorgeous!
@nancynowak4023
4 жыл бұрын
Thank you, Babs!
@kentjensen4504
8 ай бұрын
Great tutorial. Subscribed. I look forward to looking at your other materials.
@attheranch873
5 жыл бұрын
I like this a lot better than the way I’ve been doing it, thanks!
@BethanyFields
5 жыл бұрын
Wonderful! Thank you for the great tips!
@2moneyhoney
9 ай бұрын
Thank you for your tips 😊
@rosaliefunk1629
3 ай бұрын
Thank you. You make it look so easy. What brand of foam core, what brand of spray glue and what brand of knife. I always have a hard time cutting foam core. Your pastel work is beautiful.
@pjennings12
2 жыл бұрын
thank you...so helpful...could you show the framing...how to keep the glass from the painting....lovely painting!
@pegpost29
5 жыл бұрын
Well done, Nancy! I enjoyed it.
@earleneholmstrom1295
5 жыл бұрын
Thanks! This was helpful.
@candicewoodard8575
5 жыл бұрын
Thanks for sharing Nancy. Wondering if this method doesn't work with store bought frames i.e. from Michaels? They tend to be very shallow. Will definitely give this a try!
@nancynowak9420
5 жыл бұрын
@@candicewoodard8575 It does
@cinnie2543
2 жыл бұрын
I came here through Karen Margulis Patreon. That was wonderful. One question: how do you secure your mounted paper on the easel? Do you attach to a larger piece of foam core? Using artist tape? Wonderful painting.
@yvonnekeogh9845
3 жыл бұрын
Thanks Nancy. What thickness do you recommend for the foam core?
@nancynowak4023
3 жыл бұрын
1/4 " is good.
@gunnarannaburling437
Жыл бұрын
Thank you very much for your video! I am new to pastels. Can you please tell me what thickness your foam board is? I see that there are a variety of thicknesses available, most common 1/16, 3/16, and 1/8. I would appreciate knowing what size to purchase. Your painting at the end of the video is absolutely beautiful! Thank you again for sharing this video, perfect for beginners.
@yokechor-hansen336
Жыл бұрын
Hi Nancy, after mounting your pastel paper onto the foam core board, how do you then hang it on the wall? Does it need to be framed on glass and a wooden frame again? Sorry for asking, I'm new to this.
@maureenasper7809
11 ай бұрын
Where do you get the spacers between the painting and the glass?
@alexklette1138
3 ай бұрын
Amazon.. they are called “Econospacers”
@gregstone76
5 жыл бұрын
That’s a great process, Nancy. Thanks for sharing. What brand of foam core do you use? Sometimes the foam core I use doesn’t cut so smoothly, and it tends to have rough edges. Are you using Gator Board or is it another brand?
@nancynowak4023
4 жыл бұрын
There is no special brand of foam core. You must use a very sharp blade and then it will cut smoothly.
@marianneholtermann9164
5 жыл бұрын
Thank you , that was very informative.
@ruthburley7386
5 жыл бұрын
Great video, but had a hard time hearing you. I turned everything up, but still too low to hear comfortably. But, thanks for the info!
@ruthburley7386
5 жыл бұрын
Oh! Got much better when you went outside. :)
@rachelbuyshouses7261
3 жыл бұрын
Great demo. Where did you buy your frame?
@crystalthursby2808
5 жыл бұрын
Wonderful video, may I please ask what size foam core did you use to get all of 9 x 12 UART on? Thank you so very much!
@nancynowak9420
5 жыл бұрын
I have ridiculously large sheets (96 x 48) that I cut in half. I do not recommend it for too cumbersome.
@sheliacruz3502
3 жыл бұрын
Nancy where is the best place to purchase the 1/4 inch gator board., or the foam core. Having a hard time locating it. Thank you for sharing this great video.
@nancynowak4023
3 жыл бұрын
Most art supply stores have foam core and gator board. Your local Hobby Lobby or Michaels sells it, as well. I prefer the acid free foam core for it's much easier to cut and less expensive than gator board.
@sheliacruz3502
3 жыл бұрын
Thanks for replying. I have found it at Michaels. I am really trying to locate a good source for gator board. 1/4 inch. I really enjoyed watching your videos. Hope you upload more in the future. Have a wonderful happy 2021
@1002suns
3 жыл бұрын
It is true that gator board is much more expensive than foamcor. However, I have had trouble in the past with foam core bending easily after a while, especially if I leave it standing and leaning against a wall. Since you mount many pieces at one time, are you storing them horizontally in a drawer? And are you framing the pieces right after finishing them?
@nancynowak4023
3 жыл бұрын
@@1002suns Yes, the foam core has a tendency to bend a bit over time, especially the larger pieces. I paint smaller paintings (9 x 12 - 12 x 16) so I don't have a problem but if you paint larger, I would go with the gator board. If it bends, I found the framing (with spacers) evens it all out. I store my boards upright in wooden cubbies (off the floor) that I had made. I only frame the "good ones" right after I paint.
@1002suns
3 жыл бұрын
@@nancynowak4023 Thanks so much. This is very helpful information.
@debbieoquendo1091
2 жыл бұрын
Hi! Great video ! What is the name of the paper you are using to protect the pastel at the end
@cinnie2543
2 жыл бұрын
I think she said Glassine. (sp?)
@stephanienorris2962
5 жыл бұрын
What is that roller called again?
@stephanienorris2962
5 жыл бұрын
Also, where to get spacers?
@nancynowak9420
5 жыл бұрын
It's called a brayer and can be found in any art supply store
@nancynowak9420
5 жыл бұрын
A soft rubber brayer. You can buy at any art supply store.
@nancynowak9420
5 жыл бұрын
I get then through a frame supply company (United Mfrs Supplies) but I see Jerry's Artarama sells them, as well. @@stephanienorris2962
Пікірлер: 61