I used a Zimo MX648 decoder. It fits in the decoders place under the coals , but i had to remove the 6pin connector and i had to mill the support - MX648 has 4mm height and the space is about 3mm in height if i remember correctly.
The speaker is placed in the boiler . I milled the weight to make room for the speaker and I created a small resonance chamber for the speaker - although the sound will be metallic :(.
I used the existing routes for the wires , if the two wires are thin enough they will fit in the existing wires' channel in the tender's frame.
During the unmounting of the locomotive I have done e little mistake - I forgot to remove the reach rod before starting to unmount.
The reach rod is attached to the foot board via a pin which can be easily broken when detaching the boiler from the foot board.
Zimo MX648 decoder can be mounted in same way in Minitrix Br01, Br03,Br03.10(new construction).
Негізгі бет Mounting sound decoder in Minitrix Br41 (startset 11109)
Пікірлер: 2