Error: mouse_yoke.py is not reachable. Is it in the same path as run.bat?..... glad im not the only one with this issue. Not trying to be funny but I am not prepared to drop 200-300 on a yoke or sidestick 😭
@matiaspedelhez
7 ай бұрын
Hi. This error happens when the "run" executable file can't find the file "mouse_yoke.py", which is the actual script. This can happen if, for example, you move the file "run" to your desktop. They have to be together in the same folder, always. If you want to move the run file anywhere else, make sure to create a shortcut instead of moving the file itself.
@spicytakis
9 ай бұрын
how do you enable the script?
@insane666pypy
5 ай бұрын
Press ,
@deltafox52
Жыл бұрын
Hey thanks mate you changed my life !! 😚🤩 You took me from no-flight sim because my muscular dystrophy fucked up my Saitek joystick use 4 years ago... To flight sim again ! I started with a VFR in Ivoiry Coast, had to g/a few times on a too tight dirt airstrip, before decision to divert to a longer runway to save my life :P Thanks I guess next step will be IVAO :P 🤪🙏
@SebastianRestrepo343
Жыл бұрын
Thanks for your work! - so useful for the user that don`t have a full hotas :D
@TostiTostelli
6 ай бұрын
Scripts like this are a lifesaver for the disabled.
@Unbreakify
Жыл бұрын
problem, i've installed python, installed MouseYoke and yet no matter how much i've tried, the .bat script does nothing and does not calibrate. it installed the mod but now refuses to do anything else.
@VasphonTuto
Жыл бұрын
You're the goat ! vJoy was never worked for me. Thanks !!
@creamz1853
7 ай бұрын
it doesn't work on full screen and its working in windowed full screen
@edo_v2797
11 ай бұрын
the whole calibration process is done awfully i couldn't even understand 90% of what he said
@adamengku8485
Жыл бұрын
How do i enable the script at 3:14 ?
@Bassie543
Жыл бұрын
press ,
@vals130
Жыл бұрын
@@Bassie543 You areee mannnnnnnnn
@_sierra_kilo
9 ай бұрын
3:14 what did you press here
@_sierra_kilo
9 ай бұрын
Oh nvm it's ","
@Kale-4237
6 ай бұрын
Thanks
@anttistorm8455
10 ай бұрын
Awesome work !
@mptraxx5317
Жыл бұрын
why joystick not working in game??? Only when i press start in game then working (on background) but if i have full screen game not working.
@BadTutoriais
Жыл бұрын
Same problem with me, the only way to keep the script active is by clicking on the python console, if you click on the game the script stops
@mptraxx5317
Жыл бұрын
@@BadTutoriais yes exact!!! or you can set your game in windowed mode not in full screen. If you set windowed mode click on taskbar and then you will able to fly. But if you click in game mouse yoke stops.
@F_C_T_L
Жыл бұрын
Is there any solution to this problem ?
@Saturnium119
Жыл бұрын
Waiting any day of the week for a solution. Can't land planes with the keyboard all day long.
@techreside2985
Жыл бұрын
RUN WITH ADMIN!
@user-kd9bq8jo9u
3 ай бұрын
It only works if the cmd window is open, but once you are in the game, it stops working, thank you, you made me lose an excellent score in the game
@p0tent49
Жыл бұрын
Annoys me how you can still see the mouse pointer though, it's unreal such a simple feature was skipped in this game.
@brandon7099
2 ай бұрын
application does not work and closes 1 second after launching
@dani._vks
Жыл бұрын
It works perfectly until i have to calibrate the z axis, i dont know how...
@abdoomohd4117
5 ай бұрын
when I open run.bat it opens for half a sec and closes back
@kronos711
Жыл бұрын
how do I activate the script during calibration? i heard you press a key and i tried enter but it didnt work
@matiascousens2439
Жыл бұрын
The default key is comma ","
@BrubandJfowl
Жыл бұрын
This doesn't work. Running into issues during calibration of mouse/keys. Specifically the part where we are moving the mouse around. The black 'X' on the calibration window simply disappears and only displays a white box. Also having issues calibration of the throttle (scroll wheel). Non-responsive.
@matiaspedelhez
Жыл бұрын
Hello, based on what you described, your CPU is probably the source of your problem. This script has four different threads running, since doing so made development considerably simpler. So, one thread is dedicated to Python, while the others are for the mouse, keyboard, and UI. If your CPU has more than four threads, your device may have a setting that prevents the script from running effectively on all of them. I tested the script on virtual machines before releasing it, and when I limited the number of threads, the outcomes were essentially as you mentioned above. Additionally, you may post your log files and PC specs on the Issues tab on GitHub if you want your issue to be analyzed.
@jirehla-ab1671
10 ай бұрын
@@matiaspedelhez in vjoy, possible to use 2nd mouse as yoke control?
@deanohasajob
3 ай бұрын
Run.bat and other setup only opens for a split second then closes, I did delete the file, clear it from my recycle bin, and downloaded a new zip. file, unzipped and unfortunately faced with the same situation. My pc specs are like NASA pc specs, so it's definitely not due to my pc not being able to run it lol
@mauri_matta
Жыл бұрын
Hi! The mod worked perfectly until the last days. I dont know why, but if the window of the script is not visible, the actions doesnt take effect, i mean, when i change to the fs window and the cmd window behind, it stops taking effect... what could it be?? Thank you so much broo!!!
@Unbreakify
Жыл бұрын
ok now im seriously annoyed, the yoke literally does nothing even when its active, it only does anything when i put my mouse in the bottom right corner.
@Lammmier
Ай бұрын
thanks!
@Bretaxy
Жыл бұрын
doesnt work
@sid875
Жыл бұрын
When I tab out of msfs, it works, but when I open msfs and move my mouse, nothing happens, any clue why?
@thealiev994
11 ай бұрын
exactly the same problem
@nissayx
3 ай бұрын
Hello the script is working fine and all is good but it only work when i focus the script it does not work on the background
@ishaanchandel6966
3 ай бұрын
4:49 when i move my mouse it dosent register as axis and my script is enabled too
@user-gg9ed8wq9b
2 ай бұрын
If i go back to the msfs why the controler stop working how to fix it ya?
@therublixcube3052
3 ай бұрын
@Matias Pedelhez Is there a list of valid keybinds to use for the config.json file? I want to map the yoke to Num 0, then map Num 0 to a button on my mouse in Logitech G Hub? I've tried KP_0, num0, etc
@alexcojan2352
7 ай бұрын
hi the script only works when im on the run.bat application when i am in the game it stops working any help? i tried to run the run.bat app as administrator but it doesnt work it closes after 2 seconds. I played this game with vjoy and the vjoy only worked when i ran it on admin and it ran just fine but the vjoy app stopped working after 2 days so i switched on this mod
@lucasmartinsabbione7499
11 ай бұрын
When i open the bat file opens and ask me some things and i did the same and now when i try to reopen the .bat file it closes. Also al the text en the cmd window didnt appear
@svlk14s
9 ай бұрын
everything works fine, but it keeps steers to left how do i fix this?
@fullypxid
Жыл бұрын
goodbye to damn numb keys !
@aresrendezvous
Жыл бұрын
Specifically on FBW A32NX, the plane is uncontrollable on the runway at high speeds and it turns sharply left and right, ruining every takeoff and landing. It seems like the script inputs very high left and right values with little mouse movements, even though it seems normal in air. Strangely enough, this issue is not present in other planes since I am able to control the A330 on the ground quite easily.
@gena2369
8 ай бұрын
Error: mouse_yoke.py is not reachable. Is it in the same path as run.bat? What?
@DaniLUSSSS
5 ай бұрын
Python Error: Python is not installed or is not reachable. If you believe you have Python installed, check your PATH settings. how to solve? i installed pyton
@therublixcube3052
11 ай бұрын
The `.bat` file instantly closes for me. I have Python installed and added it to PATH
@anttistorm8455
10 ай бұрын
Remove inside .bat "exit /b 0" and then you see what error it is.
@therublixcube3052
10 ай бұрын
@@anttistorm8455 I already switched over to just using VJoy and Virtual Controller, but thanks for the advice. Might revisit this since VJoy has been giving me issues with an offset center point
@JdJeshaiah
11 ай бұрын
completed the bindings, but mouse doenst work in flight. ideas?
@CristianS95
6 ай бұрын
Hi there. I have set everything and it's works as intended, but now i only have one problem and others have it too for sure. If you run the game [it's doesn't matter if it's full screen or windowed] the scripts goes in background and you can't use the bindings of the scripts you have to put the game in background for it to work, how can i fix this? Or for now the only method is to play the game in background and the script in foreground? Thanks! :)
@ekid4149
6 ай бұрын
same problem here, only works when cmd windows is focused, anyone find the solution?
@CristianS95
6 ай бұрын
@@ekid4149 I fixed it by putting the content of archieve in the system32 folder except for the cmd, so i put the config, mouse yoke and i run the bat with admin rights and it s working, even in game :) if you run cmd as admin you will see a path, that's the path where you have to put the files :)
@ekid4149
5 ай бұрын
Thanks, i moved the config.json, the run.bat and the mouse_yoke.py to system32 folder and now i can run the run.bat as admin and works when unfocused, thanks a lot!@@CristianS95
@RA_Rabbid
2 ай бұрын
@@CristianS95 can you make tutorial how to fix it thx
@CristianS95
2 ай бұрын
@@RA_Rabbid Just put the content here C:\Windows\System32 and make a shortcut and run it with admin rights
@mishaq6538
Жыл бұрын
Is there a way to do something about freelook? I want to enjoy sightseeing without crashing my plane xd
@matiaspedelhez
Жыл бұрын
Yes! You can set a key to pause the script, inside config.json.
@joxzaka3316
Жыл бұрын
Only if you add rudder axis, appreciated it mate
@97skol
Жыл бұрын
Active Key is comma (,)
@blahajgaeming
3 ай бұрын
how to run the thing, i click on cmd and it still says inactive
@therublixcube3052
3 ай бұрын
, toggles the yoke and . centers it, this can be changed in the config.json file You need the latest version of Python installed (and added to PATH in the setup), and you'll also need to go to Settings > Apps > Advanced App Settings > App execution aliases, and uncheck all entries for Python
@blahajgaeming
3 ай бұрын
@@therublixcube3052 i know the path and python thing my mom is a expert at python, and besides i didnt know the . Was to center it
@Unbreakify
Жыл бұрын
Update: Fixed it.
@therublixcube3052
11 ай бұрын
How did you fix it?
@Unbreakify
11 ай бұрын
Forgot @@therublixcube3052
@Cent._
11 ай бұрын
@@Unbreakifyhow
@mark_4460
Жыл бұрын
Hola. quise instalar el script pero no pude, cuando abro el .bat me sale el mensaje "El sistema no puede encontrar la ruta especificada." 6 veces repetidas y no crea ningun archivo .log, tengo python instalado, no se que podria estar mal
@AviationTake380
Жыл бұрын
It works but my problem is when I move my mouse back the yolk doesn't pull up, the yolk only pulls up when I move my mouse to the right. This is a problem because when I move the mouse to the right the plane also turns right. Same with moving the yolk down just left. Can you please help me?
@bobthegoat17
10 ай бұрын
change binding
@thealiev994
11 ай бұрын
It doesnt work for me.
@ErblinGashi-mn6xb
Жыл бұрын
help i get the Error: Python is not installed or is not reachable. If you believe you have Python installed, check your PATH settings. Press any key to continue . . . error when i open the run program
@matiaspedelhez
Жыл бұрын
This error is because your PC can't find Python. You should add Python to the Path, which is an environmental variable that tells Windows where Python is installed. You could add it manually, but simply re-install Python and be sure to mark as active the option "Add Python to the PATH" that is present during the installation. 0:43
@mrnezbitt
Жыл бұрын
Works great thank you! Is there a way to change the mouse wheel zoom options like ctrl+scroll up to zoom instead? EDIT: Never mind, I assigned the mouse to right click+yaxis +/- to zoom in and out. For those having issues with python path etc. I'd recommend looking at installing python that allows for virtual environments so that you can set up own python environments for each task/ python project so you don't get package conflicts. Then just make a .bat file to automatically set-up the virtual environment then point to the 'run.bat' in this case.
@mattiaolla971
Жыл бұрын
Hello! I'm sorry but I'm wrongly install the program while run.bat was running. Now I'm trying to open run.bat again and the .bat window is closing after few seconds. Could you please help me to manage to find the program installed (wizard something :D) in order to uninstall and repeat all the procedure again??
@tappaaa
Жыл бұрын
Having this same issue too.!
@nicolalunanova
10 ай бұрын
Hi Matias, I've tried to install step by step as your video but after launched run.bat the status is always "INACTIVE ". Can you help me?. Thanks in advance
@matiaspedelhez
10 ай бұрын
Hi Nicola, the default key for turning on the script is comma (,). You can change that in config.json by editing it.
@Scavenagr
7 ай бұрын
how can i enable it
@jokip5206
5 ай бұрын
HOW TO INVERT
@ekid4149
6 ай бұрын
The script gets disabled if the cmd windows is disabled, any fix?
@ekid4149
5 ай бұрын
To fix this: move the config.json, the run.bat and the mouse_yoke.py to system32 folder and run the run.bat as admin. This worked for me, now it works when unfocused.
@hezyl5831
Жыл бұрын
which key does it activate?
@rishi_suresh12
4 ай бұрын
,
@friedchicken1
2 ай бұрын
will this work with PMDG 737?
@vals130
Жыл бұрын
How do I make the inactive active?
@danielchernomorets7746
Жыл бұрын
Good day, Installed as per instructed, but command file turning off, and when trying to open the file run.batch - its opening and after 2 seconds shuts off. How can i fix it? I tried to reinstall the Python, still issue. Many thanks in advance!
@tappaaa
Жыл бұрын
Same
@abdoomohd4117
6 ай бұрын
any luck ?
@Rainy009
Жыл бұрын
to enable script use ","
@matiaspedelhez
Жыл бұрын
Remember that you can change this in the settings file! /config.json
@FTSsjc
Жыл бұрын
how do you "enable" the script? You just hit some key, which is it?
@edo_v2797
11 ай бұрын
not professional at all
@Planepowered
Жыл бұрын
it doesent work :(
@edo_v2797
11 ай бұрын
you don't tell us HOW to enable it
@therublixcube3052
11 ай бұрын
, key
@TheHardRage13
10 ай бұрын
When im in the cockpit my cameraview is spinning out of control how do you fix that?? Btw how will you anyway switch from viewing mode to steering mode?
@matiaspedelhez
10 ай бұрын
You have to create a new controller profile and remove all the default bindings, only leaving the ones required for the mod. It is shown in the video. For switching between viewing/steering you can toggle on/off the mod, using the comma key by default.
@TheHardRage13
10 ай бұрын
Nevermind i did not pay attention i guess to the rest of the video, fixed it. But another problem, it doesnt recognise x axis at all, y works fine
@TheHardRage13
10 ай бұрын
it doesnt recognise it on joy.cpl
@matiaspedelhez
10 ай бұрын
@@TheHardRage13 hmm, that’s weird. Try calibrating the controller again making sure you move the cursor to every corner of the screen. Also, are you using a secondary monitor? The script will only be detecting the inputs that are inside Monitor 1.
@TheHardRage13
10 ай бұрын
Noo just a single, very weird indeed, it the sensitivity page on msfs it actually shows that the x is working, but everywhere including the game there is no sign that it would be working
@haywardcalifiredepartmentv6458
Жыл бұрын
how do i activate the scrip
@ANDproductionsBR
Жыл бұрын
by default is ",". Check your config file
@hitmanabsolution4725
9 ай бұрын
This Tutorial is so badly explained, haven't understood anything, disliked!
Пікірлер: 115