Thanks for watching! ❤❤❤ You can scoop the new expansion pack with the 25% off code right here: teftyandmeems.com/discount/PHRASES The code expires at the end of September 2021 👍 If you want more details of what's in the sample pack, watch this: kzitem.info/news/bejne/1a6gqKVphauFbHY
@demetriospira8701
2 жыл бұрын
Did you figured out how to save the mapping? When you ll load up the project again it wont be there :(
@PabloDeModeOfficial
Жыл бұрын
@@demetriospira8701 That issue is fixed in 2.11 upwards ❤
@hypxr3285
2 жыл бұрын
shift + sample edit brings up q-link edit
@allenleclerc5547
2 жыл бұрын
First time ever posting a comment on KZitem and close to 10 years of viewing. Just had to say that this was really inspiring. Super catchy. Going to play hooky from work right now and run home and start playing on my MPC.
@TeftyMeems
2 жыл бұрын
I’m honored to be your first comment 🙏❤️
@alenloop
Жыл бұрын
I just bought an MPC ONE and my first big question was exactly how to map and modify effects while playing. So thanks a lot for this great demo and deep explanation!! 🙂
@JamesBermingham
2 жыл бұрын
1:34 Appreciate your honesty. ☺️ It’s something I just learned right now 😁⭐️
@marcus268
2 жыл бұрын
If you add an Faderfox EC4, its like having 16Q Links on the MPC One. (And it can map more parameters on different pages, and show which parameter its controlling.)
@mrmumble8770
2 жыл бұрын
Can you do this in standalone mode? I didn't think it was possible to midi map q links in standalone without some hack.
@marcus268
2 жыл бұрын
@@mrmumble8770 I mapped an elektron sytakt through the mpc, via midi merge mode, q links might be indeed only possible with kikgen mod.
@MrCosmicVictory
3 ай бұрын
i always ignored submixes and returns, never really understood why i would use them on my Mpc. but this was great to learn, and i mean great. makes me appreciate the mpc even more, and definitely gets my ideas going with what else i can do 🤔
@anthonykimpton464
2 жыл бұрын
Damn, all this time I didn't know what was hiding behind my Q-LINK button. Thanks Tefty!
@boratezel
2 жыл бұрын
For controlling multiple effects with one knob, maybe using the sends can allow you to affect multiple effects mix at the same time, if you can adjust the send mix with the q link
@TeftyMeems
2 жыл бұрын
So the send is definitely one option, but if you want to control different effects on different programs, then you're still out of luck. Maybe in the future 🙏
@marcusbeyer8481
5 ай бұрын
oldish video but hopefully this is still helpful. Having a qlink control multiple insert parameters is not possible; but if you hook up an external midi controller, you can have as many parameters as you'd like all assigned to the same knob/fader
@matbjh9156
7 ай бұрын
this video changed my live sets forever thx
@andreyzorkin9324
9 ай бұрын
U can use external controller smth like Akai MidiMix to map multiple parameters to any knob.
@streetdoghanoi
9 ай бұрын
I came here for this knowledge and found you talking about the midimix I sold you, this is universe synchronicity 🤣
@andreyzorkin9324
8 ай бұрын
@@streetdoghanoi you sold me an ideal tool for this))) it really works))
@tjay8351
2 жыл бұрын
at 3:35....NICE!
@illshowyou2
8 ай бұрын
This is the best MPC One video I've seen. Thank you
@HarryFullerCT
2 жыл бұрын
Thanks for this Tefty. So glad I found this channel for learning my new MPC One.
@TeftyMeems
2 жыл бұрын
Hi Harry! Thanks for watching ❤🙏❤
@MediaMusik777
2 жыл бұрын
The Best Band in the World .......J
@ea5e95
Жыл бұрын
Thank you for all the helpful info, youa lifesaver! Or set saver ha! 🙏🏿👑💎🤯
@oscarbrask2382
2 жыл бұрын
Another BIG limitation is that, as of 2.10, q-link and midi mappings made to effects on submixes and return tracks won't get saved in the project file. Meaning you will have to redo all your mappings every time you load the project. No idea why this is. Still works in 2.9 though.
@arexpressionsphoto
2 жыл бұрын
I noticed this as I tried it tonight. BIG limitation indeed. Enough to make you not want to do it. I really hope they fix this.
@gwsound
2 жыл бұрын
Oh so it wasn't me 🙄. In the new release if you select promram edit or sample edit (etc) on the mpcx and click on it again it won't close. You have to press main again.
@AmelAmaruRestrepoCasas
2 жыл бұрын
Apparently this is a big bug in 2.10 Hope they fix this quickly
@gwsound
2 жыл бұрын
Is it correct the mpc2 daw does not support delay compensation on plugins?
@iamsteveshoe
2 жыл бұрын
Please akai, fix this - it's so annoying having to re map every time I reload a project
@mrthingamabob8117
2 жыл бұрын
That's a great video but I think you're limiting yourself by not using the 4 q-link pages. You could set one page for each submit for example... It requires some juggling back and forth, indeed, but it multiplies the possibilities by four !
@LZ42BK
2 жыл бұрын
Great video. Is it possible to add different functions to different q link banks? For instance bank A is on screen functions, bank B custom. Thank you!
@QuantumKatmusic
2 жыл бұрын
jesus--- 8:55 thankyou, was driving me nuts when trying to naigate sample chops towards the end of a sample
@elhombredelisboa
5 ай бұрын
b u e n i s i m o !
@pompeysie
2 жыл бұрын
I'm intersted in how you organise your live sessions on the MPC. Are you triggering samples, in this example? How do you set that up? Have you done a video on this yet? (lots of questions!). Thanks for the content - really helpful stuff.
@gagealbright
2 жыл бұрын
i agree. i liked learning about qlinks but now i want to understand what he was doing hitting the pads to go from the chorus to the verse etc.
@albertoferrari8967
2 жыл бұрын
@@gagealbright same here
@hhpowergr8901
Жыл бұрын
@@albertoferrari8967 it's a clip program, you can controll your tracks with the pads...
@albertoferrari8967
Жыл бұрын
@@hhpowergr8901 i figured later...thanks anyway
@fionamoonchild6203
Жыл бұрын
As soon as you said “hold the q-link button down” 🤦🏻♀️ that is so vital why don’t they make that more apparent!!! Ack!
@dpomberger
2 жыл бұрын
Yeah. The expansion pack is here :D THX!
@TeftyMeems
2 жыл бұрын
❤❤🙏❤❤
@dearvice
2 жыл бұрын
Yess nice one! I was turning around those submix things since few weeks and your tutorial just came at the right time!!!
@AUTOxMATIK
2 жыл бұрын
Hmm do u have a beatstep pro? It has a bunch of knobs maybe you could map those.
@matthewg4882
2 жыл бұрын
This is gold! Thank you!
@MrMissingReel
2 жыл бұрын
The Track sounds like the early Phantogram ....nice 😊
@maikelmaes6130
7 ай бұрын
Super clear explainer, many thanks!
@hectorsalcedo1851
Жыл бұрын
THANK YOU!
@BeatsByGemsmiff
2 жыл бұрын
Is it possible to automate the submixes??
@Joelius
2 жыл бұрын
I was just trying to figure this out the other day, super helpful!
@orkunbagatur5055
2 жыл бұрын
OMG.. i should watch this ultra informative video 1 week before.. but anyway definitely super great useful info about Qlinks !!! thanks a lot Tefty !! 🙏❤
@rickvestuto
2 жыл бұрын
Even on my MPCX the QLINKS are limited to what you can program for them I hope Akai's next Update will allow you to put any function on the QLINKS (For instance Program number, Sequence Number, Etc) I think you should get the MPC-X After two weeks I took back my MPC ONE and got the MPC-X and wow ...........so much easier with more Knobs and buttons Plus the Pads are so much better (IMO) Thanks for another Great Tutorial regards, rick
@fabricedusonchet7277
Жыл бұрын
Thanks very much for this video! Quick question how did you mute / play the track while on the main screen?
@alenloop
Жыл бұрын
I have the same question!
@fabricedusonchet7277
Жыл бұрын
@@alenloop I got it, in fact, he is not on the drum program, but on the clip program, that’s why he can just launch part of this song using the clip
@edgi55
2 жыл бұрын
Thanks again for another great instructional video
@Thepro-tf3ct
2 жыл бұрын
I was waiting for this tutorial :-)
@brendodorset3720
2 жыл бұрын
hi, do you know if it's possible to map/assign Pitch Bend to one of the Qlink knobs? let's say, if I want to apply pitch bend to a bass note recorded into the sequencer or in real time performance?
@georgesbahia
2 жыл бұрын
Super astuces Dj . Merci beaucoup
@austinstables5015
2 жыл бұрын
Awesome channel!! Loving all the content 👍
@austinstables5015
2 жыл бұрын
Anyone know if it's possible to Midi Map the Q-Link Options to a Novation SL Zero MK II? I'd love to utilize the Q-Link Edit functions and be able to actually have a visual on what it is I'm editing rather than having to remember each parameter
@LUCKYMONKEY230
2 жыл бұрын
Hey, is it possible to Midi map devices such as an APC to the MPC hardware in standalone to use more Q Links and faders ?
@AmelAmaruRestrepoCasas
2 жыл бұрын
Would love to know if this is possible
@fluim0102
2 жыл бұрын
@@AmelAmaruRestrepoCasas Yes it is! You can midi learn a lot of stuff very easily
@MusicianParadise
2 жыл бұрын
Great, easy to follow video!
@413XF
2 жыл бұрын
such a great video, dude.
@DjFuNkysara
2 жыл бұрын
Can’t wait to test it out
@joshuagardner894
2 жыл бұрын
Well, geeze, I had no idea long pressing the q-link button brought anything up, let alone that I could map them to things. I rarely use the q-links for this reason, they always seem to do things I don't care about
@TeftyMeems
2 жыл бұрын
Yup, like I said, not very intuitive but SUPER useful!
@synthsforbreakfast
Жыл бұрын
I guess it’s not possible to assign more than one parameter to one Q-link knob correct? And there is no way to set a range for the parameter? Thanks!
@michaelblazecka7150
2 жыл бұрын
Have you given any thought to using an external midi controller to use for performance? I use a MidiFighter Twister which has sixteen knobs that give you both push control and relative control
@TeftyMeems
2 жыл бұрын
Yup, that's a great option, too 👍
@ponkiemusic
2 жыл бұрын
it's cool but I always struggled with external controllers, Midi informations sometimes crashed. wouldn't take MPC One on stage with external controller.
@Reggi_Sample
Жыл бұрын
Would be it similar or even better to put the vocal delay and reverb on a return channel instead of directly on the submix. Then you could automate or live perform the mute on/off of the return or the actual send level to the return. Idk
@Reggi_Sample
Жыл бұрын
Ahh a good example of why you should watch to the end before commenting
@deirellbyrd6770
2 жыл бұрын
Awesome video Tefty! I never thought of using sub mixes and qlinks that way! Have you run up against any problems with your mapped qlinks not saving to the project properly? I had a template with all qlinks mapped to control various hardware synth parameters but the settings do not save anymore now that 2.10 is on my machine.
@dusty2130
2 жыл бұрын
Hi, I am having same problem. The submix usage on the clip is great! Thanks for that. Just want to check if you have them saved and still work when open the project again. Mine doesn’t saved!
@TeftyMeems
2 жыл бұрын
Yeah definitely a problem right now. I'm hoping a 2.10.1 patch hits really soon addressing some of the bugs.
@AmelAmaruRestrepoCasas
2 жыл бұрын
@@TeftyMeems Holy fuck I almost went mad trying to figure out if this was just my problem.
@moonsagemook4rmyumegakure405
2 жыл бұрын
I have a problem with my live 2, my two q-links and the q-link selector isn’t functional….. the are still touch sensitive but they won’t in relation to changing parameters on the ui
@juanmiller8053
2 жыл бұрын
That's kool
@MG53v8
6 ай бұрын
Would you have have things like reverb's mix wet/dry at 100% on the Return ?
@salix5380
Жыл бұрын
For using the knob with an fx on my snare for exemple,,it s submixes? I don t understand i just want reverb on my snare,and contrloled with the knob,sorry i'm french
@AmelAmaruRestrepoCasas
2 жыл бұрын
Great Video, really helped me a lot. BUUUUT I have one very important question: How can I save the Q-link mapping for a certain project. When I re-opened the project this morning none of the Q-link knobs was assigned to any of the FXs on the submix, this has proven to be really frustrating.
@mrthingamabob8117
2 жыл бұрын
you have to save your project as a user template, then everything will be saved when you load it !
@AmelAmaruRestrepoCasas
2 жыл бұрын
@@mrthingamabob8117 not sure how to do this but will definetly look into it!!!
@mrthingamabob8117
2 жыл бұрын
@@AmelAmaruRestrepoCasas it's pretty easy actually, check this video : kzitem.info/news/bejne/z2p8t4JnkouDoIY
@AmelAmaruRestrepoCasas
2 жыл бұрын
@@mrthingamabob8117 Thank you very much!
@AmelAmaruRestrepoCasas
2 жыл бұрын
@@mrthingamabob8117 So i finally tried saving it as a user template but still wont work, it doesnt save my Qlink edits for the project tab when assigning them to insert FX parameters on the submixes. What ive done is just re map the parameters every time I re open the project, which has been annoying as fuck
@aubergine777666
2 жыл бұрын
It is unfortunate that you can't play a bigger set with any of these grooveboxes except for the sp404. Would love to be able to have a big set on a MPC and use all the advantages of it. Next gen maybe.
@SlowlyYouRot
2 жыл бұрын
Care to elaborate? I'm interested in the MPC as a live performance hub for sequencing other gear, including semi-modular and eurorack stuff. Why can't I play a longer set on it?
@aubergine777666
2 жыл бұрын
@@SlowlyYouRot because of RAM limitations. 2GB from what you can use 1 gb at max
@SlowlyYouRot
2 жыл бұрын
Yeah, I can see that being a problem for someone trying to make whole projects or sets all within the box but im leaning more towards using it as a sequencer for my hardware that can save all my compositions as well as automations for both midi and CV. It's quite a nice interface for that, especially being able to see everything on the screen.
@aubergine777666
2 жыл бұрын
@@SlowlyYouRot yeah in that case RAM is probably not a problem.
@SlowlyYouRot
2 жыл бұрын
@@aubergine777666 I hope it won't be a problem! Thanks for bringing it up. Good thing to consider, especially since im really trying to avoid the problems I have with Ableton crashing when I have too many devices or midi tracks going. I like to have everything going at once instead of recording it into tracks. The MPC will distribute the computation load and be a performance interface. Just within my budget as well.
@wiggesobk
2 жыл бұрын
That's very helpful!
@dandas1000
2 жыл бұрын
Doesn't MPC have that customizable macro thing for controlling multiple values at the same time? or was it on the Force only? Hmm...
@user-mb8rf7qk5q
2 жыл бұрын
Thank you for this!! Im just finishing my first video soundtracking project on the One and I’m an effects junkie and already low on memory and was thinking how the hell is thing gonna work for me?! Thank you!!
@TeftyMeems
2 жыл бұрын
Awesome! Love to hear score work happening on the MPC.
@Shapeplusform
Жыл бұрын
Can each q-link only control one parameter at a time?
@TheBuddyKeys
2 жыл бұрын
I have an MPC live 2 and I wish that all banks of the Q link at least the top knob could be dedicated to tempo. Please help! I just use the mpc as a drum machine for solo singing/piano gigs.
@garyclement5527
2 жыл бұрын
I would like your help with the midi - I’m thinking about a purchase of your sound pak
@miladbarikani3591
Жыл бұрын
it was like they made q links mapping confusing on purpose cause everything is so easy
@F_letc.h
2 жыл бұрын
During your performance when you were hitting the pads, were you muting/unmuting elements? Launching clips?
@TeftyMeems
2 жыл бұрын
Yes, you pretty much nailed it 👍
@albertoferrari8967
2 жыл бұрын
@@TeftyMeems hi, how you do it, not being on the pad mute menu?
@user-mb8rf7qk5q
2 жыл бұрын
Can you show a video mixing an actual song on the One? I’m kind of wondering how to know for sure that I’m getting quality levels.
@TeftyMeems
2 жыл бұрын
Rule of them, give yourself plenty of headroom and utilize the submixes as much as possible. I'll consider a video on the topic. It's tough with those because they end up being super long videos 🤣
@gwsound
2 жыл бұрын
I make complete songs on the mpc.
@user-mb8rf7qk5q
2 жыл бұрын
@@TeftyMeems thanks for that. I saw your video with some submix tips but definitely need something a little more in depth. Your videos are really great thanks for all you do
@djsharpmclive1221
2 жыл бұрын
Good info
@Jeka18137
7 ай бұрын
Like and subscribe for this interesting tip! 💥💯
@Bonkiepoo
2 жыл бұрын
Yes now I can actually be doing something in my beat videos 😴 I’m not a fan of finger drumming and my timing is butt
@TheXxjmpxxx
2 жыл бұрын
Dude, right there at 2:27... what did you do/press to get into the effect parameters?! I rewinded like 7 times and even played it on half speed... 🤦♂️ Please share the secret
@MrBarryThor
2 жыл бұрын
He skipped it but you just click on insert then scroll to air filter and click it to bring parameters
@janediaztempiam8442
2 жыл бұрын
Can I send only one track out to the headphones?
@TeftyMeems
2 жыл бұрын
99% sure you can’t
@dillipphunbar7924
2 жыл бұрын
Up to 3 clicks on the Qlink bank button or map an external controller...doesn't seem too bad. Any suggestions on budget-friendly and reliable/compatible usb hubs? Does overbridge /hub work with the MPC ONE?
@TeftyMeems
2 жыл бұрын
That hub should work. Any class compliant usb hub should do the job honestly since it's just following a protocol.
@dallas-cole
2 жыл бұрын
Super useful 💩
@fredofrito
Жыл бұрын
Definitely not very intuitive 😅 Great video!
@JayxJay
2 жыл бұрын
Do you record automation using the q knobs?
@TeftyMeems
2 жыл бұрын
Yeah you can. Comes down to if the parameter you have linked to q-link can be automated. Thanks for watching! ❤🙏
@curtisnewton895
2 жыл бұрын
never regreted a purchase that much that crap of mpc one is extremely complicated to use
@adrianmay_multiinstrumentalist
2 жыл бұрын
Just wondering if anyone else is having this problem with their MPC One: kzitem.info/news/bejne/mZ95zIiVn4Z5aIo
@cheodelpino581
2 жыл бұрын
Too advance for me lol
@MGoolas
Жыл бұрын
You can't assign multiple things on a single qlink unfortunately. But you can do that with a midi controller and assign multiple parameters on a hardware knob. I have asked akai for macro functionality in mpc long time ago.
@chris_thastrain
2 жыл бұрын
Honest commentor here. Energy was above exceptional, The overall efficiency for the content creator and the viewer 5 stars, last but not least. Guys and Gals and Non Binary so forth. Click the links listed below the video if you "like me end up making a transaction. takes two seconds and it benefits them at nothing but a few seconds extra of your time. WOW END QUOTE... Anyways thanks to the most high _ TᙓᖴTYᗩᑎᗪᙏᙓᙓᙏS
Пікірлер: 138