Dude thank you! I've been trying to figure this out for 6years plus.... Been having my mpk just sitting collecting dust... lol I'm hyped now!
@tomhikon
10 ай бұрын
Glad to find this video after pulling my hair out for the past 2 hours 😂... You saved what I have left...Thank you!
@beautifulguitarhands
2 жыл бұрын
I been using Arturia controllers but now I’m gonna try the MPK mini. Thanks for the excellent overview and demo. Really helps people like me with minimal MPC knowledge.
@7THOU
8 ай бұрын
MaaaaaaN ! THANK YOU. ive been toying with this for 2 yrs. Your went STRAIGHT TO THE POINT. BLESSUP
@rockguitarshred
7 ай бұрын
Hope this channel stays up forever
@ryannbakerbeats
2 жыл бұрын
Bro you are awesome for spending so much time helping people learn how to use their mpcs. Just got my retro live 2 and your videos have been so helpful. I just keep having my MacBook say I installed driver wrong when I go into controller mode.
@adrielgarcia8939
4 ай бұрын
Your videos have saved me
@Georgewilliams02
2 жыл бұрын
Been doing this for over a year with my love 2. But still love your vids. You are by far the most helpful and gracious person iv came across on KZitem when share your knowledge when it comes to everything MPC. Thanks again for you knowledge
@MatthewStratton
2 жыл бұрын
Nice man. Thanks for watching.
@Samwisedragon
2 жыл бұрын
Excellent content as always!
@michaeldombay
Жыл бұрын
You explained it so well compared to other videos thank you. You answered alot of questions my guy 🔥🔥🔥🔥
@Ganjahandler42
6 ай бұрын
Dude I just gotta at your pretty helpful man the mpk was my first Synth like 6 years ago and I just got the Mpc you rock with your quick courses 🤙 best on KZitem!!!
@paulstephenson3867
2 жыл бұрын
Thanks dude. Really helpful 👍
@MatthewStratton
2 жыл бұрын
You're welcome!
@Trioptic3D
6 ай бұрын
That's was great, Matthew! I'm going to try this tomorrow.
@ejpentertainment2542
2 жыл бұрын
Thank You Matt... I've been looking for videos on how to do this
@MatthewStratton
2 жыл бұрын
You're welcome. Glad to help.
@culturemax234
Жыл бұрын
Thank you so much
@g-track5065
Жыл бұрын
You teach very Very well Matt!!!
@dameianhasty8261
11 ай бұрын
Priceless video, THANK YOU!!!
@bamboosingularity3330
Жыл бұрын
Thanks a lot!!!
@dashradio1
Жыл бұрын
Thanks for the life of me I couldn't get it to work, thanks
@adamware2815
Жыл бұрын
U have the best videos bro TY .. i have learned so much essential stuff from ur videos
@idread1104
Жыл бұрын
Ty so much!!!
@darkraven178
2 жыл бұрын
Good stuff mattystrat
@michaelfalcone3713
11 ай бұрын
thank you your very helpful I really appreciate you.
@keithmurray9241
2 жыл бұрын
Great info and well presented! Can you also do a tutorial on setting up the transport controls for an MPKxx controller? I got as far as getting everything working except pause/play and record. Don’t know what im doing wrong.. would have thought Akai stuff would play together better than this!
@yotrakz
Ай бұрын
Big ups friend. Thanks for the vid. Now if I can just find a mapping editor for my AKAI LPD8… they discontinued the editor.
@bigskybob
2 жыл бұрын
Super helpful tip! Never knew how to enable the multi-arm
@MatthewStratton
2 жыл бұрын
Glad it helped!
@puppetmasternostringsonme8293
2 жыл бұрын
Thank you
@MatthewStratton
2 жыл бұрын
You're welcome
@GhettoStyles
2 жыл бұрын
This is pretty cool!
@MiHa1Love
Жыл бұрын
thank you!!!)))
@kurtkresge4071
Жыл бұрын
Question, so I just want to use the keyboard on the mini play and use the beats on mpc one. Is it the same concept? Better yet do you have a video. Lol This is all new to a O.G. Still shredding the bass and drums in the garage.🤙
@SQUIGGLEVISION3D
Жыл бұрын
You rock, was wondering what the best eay to go about hooking some keys to my MPC definetly considering an MPK especially since theyre so affordable
@smitty_mittenz
2 жыл бұрын
CHECKITOUT! Love it.
@cresshead
2 жыл бұрын
Excellent tutorial, thank you!
@MatthewStratton
2 жыл бұрын
You're very welcome!
@barnabymarks1446
Жыл бұрын
First off, thank you and much respect 🙏 quick question, is there a way to shorten the sample on the pads when you are playing? Say a sample is 1 bar long, can I push the pad and only play the sample as long as the pad is held down?? As you can tell I'm a beginner, but would really appreciate the advice !
@dannyconrad2779
Жыл бұрын
How do you get pad perform (chords) to work From MPK Mini pads when hooked to The MPC ONE in standalone? Thanks for any help and for your videos in general.
@Believer7154
4 ай бұрын
Thanks for the video my man. Seen a number of your joints, you're good at it! Its appreciated. Im new to all of this but Im interested in learning and would like to make make beats. Dont know where to start as far as what to purchase. Should I get the MPK MINI with the MPC ONE or just one piece of equipment in the MPC Key 37? Thanks in advance for help and or advice.
@Benj4minC
2 жыл бұрын
Hey man, is there a way of syncing effects from the MPC to the MPK knobs? I’m still struggling with that. Basically so you can use the cut off and resonance effects like you would on regular synths. Please find away. 🙌
@BelialInferos
Жыл бұрын
Yeah, I've been trying to figure that out as well. How to assign functions to the MPK knobs when using it with the MPC One. Any news on that topic?
@Benj4minC
Жыл бұрын
@@BelialInferos never got a reply. Was excited when I saw this notification 😅
@read85Soldierebook
Жыл бұрын
Good vid bro.
@MatthewStratton
Жыл бұрын
Appreciate it
@dazboot2000
2 жыл бұрын
Thank you Mathew
@MatthewStratton
2 жыл бұрын
You're welcome!
@gentrol1630
2 жыл бұрын
What would I do without ya matt? Just got a Model 16...cant wait to see how this expands my MPC capabilities.
@sherwoodsmallidge9186
Жыл бұрын
What is a model 16?
@jrf1962
6 ай бұрын
Can you do the same procedure with osmone synth or Fantom Roland?
@TaTTe024
7 ай бұрын
thanks 🫶🏻
@hectorsalcedo1851
Жыл бұрын
Awesome video man, thanks a lot!! Question, is it the same if i wanna use a M-Audio midi keyboard?
@ericdavis85
6 ай бұрын
Niceeeeee‼️🔥
@TheIndustrialRetrospective
2 жыл бұрын
Thanks as always man! This is exactly what I have been looking for, I use my pads to trigger one shot samples ala 1980s SKINNY PUPPY and MINISTRY and would love to use my keys for, key stuff.
@MatthewStratton
2 жыл бұрын
Nice!
@aworkovart
2 жыл бұрын
Awesome 👌
@keitomineproductions4133
2 жыл бұрын
My mpk mini mk3 is a good accessory to the mpc, I might get the arturia because I hear it has a better key bed
@ruffsidetv4035
Жыл бұрын
This my most favorite learning tool..feels like I'm taking a class at Harvard..or even better UCLA which has the George Lucas/ Steven Spielberg studio!
@nachoKrinkle
2 жыл бұрын
I just got one of your tshirts. Where's the coolaid. :). Love the channel. I'm learned more from you than any other source on mpc one. Thanks 🙏
@MatthewStratton
2 жыл бұрын
Glad you are learning! Thanks for the support.
@georgesbahia
2 жыл бұрын
Merci beaucoup. Muito Obrigado
@oldsoulcreations
2 жыл бұрын
This might help. Hook up your mpk mini to the mpk editor on your computer. At the bottom of the editor you can set your midi channels for the pads and keyboard. Then follow Matthews video. Devils in the details!!!
@Whistler-007
Жыл бұрын
FFS I could see MIDI going into the MPC, it'd light up the pads while playing remotely over MIDI, but it wouldn't make a sound. Aaaaaaah ... you have to ARM the Fn tracks!! Thank you!
@ACCOUNTANTB
7 ай бұрын
Can encoders and faders from midi keyboard be assignable to control any other modulations ? filters, lfo...volume from each track...etc ??
@fantomandjupiterx864
3 ай бұрын
Didn’t know you could do that
@mattcero1
Жыл бұрын
Dude! Great video. This might be a no-brainer but what's your favorite keyboard with the ONE? Akai Professional MPK Mini Plus or Arturia MiniLab 3? Thanks hombre!
@incaroads001
Жыл бұрын
Question: Where'dja get that sweet MPC tee?
@TodaySatan
Ай бұрын
I got both the One and MK3 but am still playing around with the One. It takes me a while to understand everything conceptually.
@chokzholics
Жыл бұрын
cool
@SergeyCoder
2 жыл бұрын
Hello. How to use mpk mini arpeggiator with mpc one bpm? I tried to set bpm: ext on mpk mini, but there’s no sound, arpeggiator doesn’t sync & no sound :(
@EclipseAtDusk
Жыл бұрын
I’m not sure where else to put this, but Matthew, I could use some help if you’ve got the answers. I have an MPK Mini Play Mk I, I have everything seemingly set up correctly (proper notes, midi channels, etc etc) However, when I assign the drums on my MPC One to the pad midi channel, there’s no audio, but the MPC Recognizes it’s receiving a MIDI Signal. If I switch those pads to a plugin, it plays that just fine, and the keybed will play the drums - but I want the opposite
@dharmeshbalsara539
2 жыл бұрын
Hey Matthew! How do I route the settings from mpc to my roland fantom so that I can record the samples or the different drum kits that are in mpc to my roland fantom. Thanks! Note -Recording will be on the fantom.
@ygung
11 ай бұрын
I have an mpk mini mk3. If I upgrade to mpc one, am I going to get better sounding drum samples. ?
@DjdoubleedgeRegg
2 жыл бұрын
I'm frustrated by not finding this type of tutorial for the MPC One w/the MPK249 Would I set it up the exact same way? 🤔🤦🏾♂️
@comicbookjerk
Жыл бұрын
The Pads feel really stiff? How can you adjust theSensativity of just the MINI
@unclemick-synths
2 жыл бұрын
Great video as usual 👍. A question - I presume the mapping of the pads is compatible with the MPC's native mapping? I use a Roli Lightpad Block to play Bank B while the MPC pads play Bank A but the Lightpad uses chromatic mapping so I have to remember to switch the MPC track's map to chromatic so that both sets of pads are mapped the same way. My wish is that Akai would add a mapping feature that translates the input's mapping to the track's mapping. This was a handy feature in Cubase during my Atari days.
@user-sw7oh9oy6f
2 жыл бұрын
What should I get ? MPC or a Digitakt great vid by the way
@MatthewStratton
2 жыл бұрын
Two different workflows. I never used a digitakt so I will say MPC 🤣🤣🤣
@BlondieSL
2 жыл бұрын
Sort of an off-topic question about the MPK Mini. Have you or anyone taken one apart to check the connections for the keys? I haven't taken my apart as yet, but before I do, i wonder if anyone knows if each key has just 1 contact or 2 (or more??) ?? The reason is that I have a set of bass pedals from my old Yamaha HS8 organ and I want to build an interface to the MPK mini so that I can play bass with the pedals, having many options for types of sounds. Also, if that works well, I want to also add to the interface, one of the keyboard beds from the same old organ. Basically, I want to build a stand-alone unit with pedals and 1 keyboard, using the mini as the engine. So I have to decide if it's worth it. IF the keyboard on the mini just uses 1 or 2 contact per key, then it's worth it. But if it's using more, then perhaps not so much. Ideas?
@culturemax234
Жыл бұрын
🖤
@jamiebanana101
Жыл бұрын
So can I not play drum pads as well as keyboard keys at the same time without having an extra device? seems abit of a rip off if that’s the case as that’s the whole reason I bought this thing.
@MurrayDancey
2 жыл бұрын
Thanks for the tutorial ! I've plugged my MPK Mini Mk3 in to my MPC One... and followed the tute... it works, keys seems to work as expected... but for the Pads... Pad1 on the MPK is triggering Pad13 on the MPC One... Pad2 on MPK is triggering Pad15 on the One.... what's going on? How do I fix it?
@marktaylor535
2 жыл бұрын
Quick question. I had recorded a lot of music on my dp-24sd on to an sd card. Then i put it in my recently purchased mpc one where i can possibly add to some of the beats i already made. When i put it back into the dp-24sd, the file is gone. But when its in the mpc one, theyre all there. How can i get them back?
@Radjammin
Жыл бұрын
some heroes don't wear capes
@FJness
Жыл бұрын
howd you get a purple skin
@fade2blak91
2 жыл бұрын
Thanks for this one man! Now my question is can this be saved as a template so we only have to do it once and load it up?
@MatthewStratton
2 жыл бұрын
You can save the whole project as a template. When you press "save as" you can check the box that says save as template and you can load the template up from the start screen.
@fade2blak91
2 жыл бұрын
@@MatthewStratton man hell yea! Now what about qlinks on mpk? Can you map parameters to them from the mpc in standalone? If i had the four from the mpc and the 8 from the mpk im super good!
@JeffyG
2 жыл бұрын
Any clue on how to configure a LaunchPad X for MPC Beats? The device is there in Preferences, but the typical chromatic midi note assignments don't seem to work with MPC Beats. It's possible MPC Beats expects midi channel 10, whereas default LaunchPad X might be midi channel 1.
@MatthewStratton
2 жыл бұрын
I'd imagine you would have to make sure CONTROL is turned on for the LaunchPad X and you would likely need to manually map the software pads to the hardware pads using learn mode in the MPC Beats software.
@enphour7960
2 жыл бұрын
Can the Akai MPC Software (for Mac and PC) be setup to record multiple MIDI channels as well?
@MatthewStratton
2 жыл бұрын
Yes, the it works with the software too.
@lagreiv
2 жыл бұрын
Hi there. Did you have issues with the arpeggiator in the mpk mini?? When I try to play into mpc one. It doesn't work properly. Did you have a solution for this issue??? I can't use arpeggiator with MPC one. Thanks man
@MatthewStratton
2 жыл бұрын
You need to push play in mpc and send the sync out to MPK. MPK needs to be set to external for it to sync with an external device.
@boomboombaby9140
Жыл бұрын
Pads on the MPC one so small that he rather use the ones on the mpk lol that’s why I went for the MPC live 2 😂
@BALANBEATS
2 жыл бұрын
Hi sir I am Sathya from india im trying to buy your mpc one essential course but the payment declined either card and paypal payment for some reason. Is there any options to buy your course at your site? help me sir.
@MatthewStratton
2 жыл бұрын
Please email me at hello@matthewcreating.com for assistance in this matter.
@johnhunt1435
Жыл бұрын
Miss your videos -- I hope everything is ok.
@pydepiperproductionsllcjon7585
2 жыл бұрын
Man I have dyslexia and trying to learn all this from videos has had my MPC one setting on my desktop looking at me. I cannot get it. Do you know of any people who teach? I'm in New Jersey but can travel to New York of Philly. It's just way to much for my brain to learn from watching videos. I really would love to learn.
@nick2128
2 жыл бұрын
I bought a mpc a year back and I’m still learning new things on it, it just takes time , probably like 3-5 months until I understood the work flow without frustration
@pydepiperproductionsllcjon7585
2 жыл бұрын
@@nick2128 Really? I think it's me all the time and I get so frustrated I feel stupid like why I'm not understanding this.
@oldsoulcreations
2 жыл бұрын
This might help. Hook up your mpk mini to the mpk editor on your computer. At the bottom of the editor you can set your midi channels for the pads and keyboard. Then follow Matthews video. Devils in the details!!!
@sherwoodsmallidge9186
Жыл бұрын
So convoluted nor I know is easy qlink pad filter for instance
Пікірлер: 105