Half the comments on here make u laugh. The guy is simply showing u how easy it is to apply 9H ceramic coating in sections moving the applicator sponge vertical then to horizontal motions. Once applied leave to dry anything from 30 secs upto 5 mins. Then buff with a microfibre cloth. Cheers for the informative video. 👌👌
@herbertmartinez7639
2 жыл бұрын
How many times in between coats do u apply?once a month or ones a week
@NotMe35971
5 жыл бұрын
Grey car is easiest to work with. Try on black and you'll be terrified of results in the sun :D Never do this in sections like in this video. section should be complete panel. Otherwise you'll see marks of overlaps after completion.
@imoboxingtalk5394
6 жыл бұрын
I got some in today and it says to wet the cloth and use the 9h. Directions are a bit hard to understand but that's what I made out. Is that how you did it or was your cloth dry?
@tonipieleanu
6 жыл бұрын
IMO Boxing talk no, i used only dry clothes
@BMWguy974
5 жыл бұрын
Do you use dry or wet towel to remove residual coating? How long it takes for coating to be properly dry when I can drive car without damaging coating with example dust
@tonipieleanu
5 жыл бұрын
Dry towel. You can drive straight away, but make sure you're not getting it wet for the first 24-48h.
@mn3798
6 жыл бұрын
Do you think it’s good product compared to other ceramic coat?
@tonipieleanu
6 жыл бұрын
M N it's very hydrophobic so far. Check out the other video. Let's see how it compares along the way
@superbogs
6 жыл бұрын
It is garbage. It won't last and one professional UK detailer tested it and it turned a milky color over time. Don't waste you money
@markdixon8567
6 жыл бұрын
I used this on my car 6 months ago. I did use a damp microfibre towel to wipe down followed by a dry one. The car is a mid grey metallic and there is no milky colouring and is still repelling water very well and bugs easy to remove. Never used any other ceramic coating but for the price very impressed.
@N-e.o
5 жыл бұрын
i dont understand. Does this product work or not?
@rosiedakri2704
6 жыл бұрын
I did this today but it’s left smears all over the how do I remove the smears
@chrisg8p
6 жыл бұрын
just polish it with some compound should be easier than you think dont panic
@superbogs
6 жыл бұрын
You may need to have it wet sanded out
@pb6198
5 жыл бұрын
@@superbogs dont be ridiculous. It is so thin that applying shampoo with a sponge harshly would get rid of smears
@tomveil898
5 жыл бұрын
Czy ten produkt naprawdę działa?
@danielbogdanbonta9501
6 жыл бұрын
Ce parere ai despre ceramica asta, avand in vedere ca este doar 99 ron? Si cat timp o lasi dupa aplicare, inainte sa o stergi?
@tonipieleanu
6 жыл бұрын
Daniel Bogdan Bonta încă testez. Am lasat-o si 1min si 20. Se șterge mai ușor dacă lași 1minut. O găsești si la 50 lei sau chiar mai puțin ;)
@danielbogdanbonta9501
6 жыл бұрын
Toni Pieleanu in ţară? Imi poti da un link?
@tonipieleanu
6 жыл бұрын
Nu, de la mama lui din China :)
@danielbogdanbonta9501
6 жыл бұрын
Toni Pieleanu da, intr-adevar, ai dreptate. Dar cand esti ca mine ca nu ai rabdare nici pana a doua zi, cand comanzi din tara, aliexpressul nu este o obtiune. Am luat de pe ceva site din romania 3 sticlute, acum asteptam clientul potrivit pe care sa facem teste. Bafta si spor iti doresc, multumesc pentru raspunsuri!
@metronomexxx
6 жыл бұрын
You polish before applying the coating?
@tonipieleanu
6 жыл бұрын
Geva Soraski yes, with Menzerna 3500. Then prepped with Sonax Paint prepare and Carpro Eraser.
@metronomexxx
6 жыл бұрын
Thanks!
@MuhammadHakimmuddinIHC
6 жыл бұрын
I've tried to apply the coating and give it 3 minutes to dry in night, but it is still so sticky to wipe with the microfiber
@biofractal78
6 жыл бұрын
where is the removal part on the video????
@NotMe35971
5 жыл бұрын
Just dump car to the junk yard.
@autovageris
3 жыл бұрын
how long wait after coating for buffing?
@tonipieleanu
3 жыл бұрын
1-2 mins, just watch the video and you will see me buffing it.
@autovageris
3 жыл бұрын
@@tonipieleanu so what can you say about this cheap ceramic? your opinion worth money or no
@tonipieleanu
3 жыл бұрын
@@autovageris It's hit and miss. I don't think it's made by a single producer, but many produce it in the same packaging. You don't have any guarantee that it will perform well. I was lucky and got a good one. Others have reported poor performance. Make of it what you want. It's nice to tinker with it but I would stay with a reputable brand for anything else.
@chctham
3 жыл бұрын
When buffing, do you need the damp microfiber clothes? I do not seem to get it work. Coat it, wait for 5min, use damp clothes to wipe it off
@xavierkelvin6402
6 жыл бұрын
The instructions that came with are written by an ESOL student "English as a Second Language" hard to understand. Not clear, and this video does not help either.
@tonipieleanu
6 жыл бұрын
It's not meant as an instructional video, just reference and documentation. Application is very simple anyway: just apply in cross-hatch pattern, leave for a couple of minutes and wipe off.
@eduardomeneses5633
6 жыл бұрын
How long should I wait to remove the product?
@tonipieleanu
6 жыл бұрын
Eduardo Meneses 1-2 minutes in warm climate
@bcarlson0705
4 жыл бұрын
Actually this stuff is fine. I've used it twice with good results.
@predatorhunteranon8315
6 жыл бұрын
Crap!!!! It's a nightmares to wipe following instructions to the letter.
@bcarlson0705
4 жыл бұрын
I used a damp microfiber to buff it off after 5 minutes and had no issues or streaking.
@richardnyambuya7415
6 жыл бұрын
You didn't show how to remove the coating mate
@tonipieleanu
6 жыл бұрын
What the whole video, mate. From 3:30 I start removing it.
@richardnyambuya7415
6 жыл бұрын
Toni Pieleanu No I mean you didn't show how to remove the ceramic from the car. The whole video is about the application process only.
@tonipieleanu
6 жыл бұрын
Now I get it... Yes, application and removal of residues, that was the point. Not actually removal of the coating. Is part of a longer coating comparison test, so no point in removing it :)
@mitchsmith71
6 жыл бұрын
Blimey, and here we almost have another 'Two Ronnies' sketch.... Toni needs a job in comedy!! :-D
@rwl6935
6 жыл бұрын
Why the mask?
@tonipieleanu
6 жыл бұрын
I applied multiple coatings on the hood to compare them side by side.
@rwl6935
6 жыл бұрын
Toni Pieleanu no, I mean the breathing mask
@tonipieleanu
6 жыл бұрын
rwl6935 ah ok, I was trying to avoid the fumes due to applying in indoor space.
@mitchsmith71
6 жыл бұрын
this is almost like a 'Two Ronnies' sketch, brilliant!!
@rwl6935
6 жыл бұрын
Mitch Smith 😂😂
@jonichin4661
6 жыл бұрын
Is it safe for fresh paint?
@tonipieleanu
6 жыл бұрын
Probably not, I would leave it gas-out for 30-60 days before applying any ceramic coating.
@jonichin4661
6 жыл бұрын
Toni Pieleanu ok, thank you.
@MuhammadHakimmuddinIHC
6 жыл бұрын
Now that answer my problem. I tried to apply it on a new paint
@Rapo2723
6 жыл бұрын
This coating are ok for the glass? Thank you
@tonipieleanu
6 жыл бұрын
I couldn't tell you, I have not tried it on glass.
@luke26smith
6 жыл бұрын
Toni Pieleanu works great on my windshield.
@tonyhairbeautysalontonyhai3939
6 жыл бұрын
Luke Smith got any video to show?
@gabriels4786
6 жыл бұрын
A gas mask?? Seriously dude??
@xivix6710
6 жыл бұрын
Better be safe than sorry
@laczekwwk
4 жыл бұрын
Serio w masce ? :D :D
@geogarcia986
6 жыл бұрын
I wanna see it on the scratches
@superbogs
6 жыл бұрын
You are not supposed to put it over scratches. Ceramic coatings won't help your scratched car. This stuff is junk also
@geogarcia986
6 жыл бұрын
@@superbogs damn , I got screw . That's how it show it on the video . Damn , that sucks .
Пікірлер: 75