The best voice to hold viewers/audience back after Morgan Freeman is Osamah Alabdullah (Q8Pilot). 🤩🥰😍
@Q8Pilot
2 жыл бұрын
That's one of the nicest comments I have received on the channel. Thank you my friend!
@FlySidhiqe
2 жыл бұрын
@@Q8Pilot Your welcome Brother..
@Wlaspec
2 жыл бұрын
I agree!
@blumac9801
2 жыл бұрын
So true!
@phjo5117
2 жыл бұрын
Definitely agree!
@MR.B1819L
2 жыл бұрын
I must say after following this video i didn't notice a significant amount of fps gain but the sim is so much smoother overall. Thank you sir!!
@Q8Pilot
2 жыл бұрын
Good to hear that, that also has been my experience, a much smoother experience.
@stephaneleduc7934
2 жыл бұрын
Hey Q8 I very rarely write comments on KZitem but I have to say that you are an amazing guy and content creator.. I have been going through a lot of stress lately and you always manage to provide me with very comprehensive content that reminds me of the hobby that I enjoy so much! Especially these videos always help me to keep up with whats going on and just make me look forward to whenever I have time to hop back into the sim after some long work hours. Please keep up the good work and dont bother with any useless critique… you are doing everything right - much appreciation from switzerland - Stėphane 😊
@Q8Pilot
2 жыл бұрын
Thank you ever so much for your kind words Stephane. I truly appreciate it. Those words of encourgement is really what keeps me going. Stay safe and well my friend!
@CyberSystemOverload
Жыл бұрын
Hope you are doing ok friend. Make a list of whats stressing you, it helps a lot seeing it all written down. You can then make a plan on how to deal with it. Sometimes the solution will jump out. I have been under great stress and know the feeling. The list trick helped me.
@stephaneleduc7934
Жыл бұрын
@@CyberSystemOverload Thank you my friend - it has already gotten better by now 👍 really appreciate the kindness 😊
@CyberSystemOverload
Жыл бұрын
@@stephaneleduc7934 Glad to hear that friend, onward and upward! 🚀
@Gilles45
Жыл бұрын
With FPS hovering between 18-22, I was seriously considering buying a new computer. Following your recommendations, I am now getting 35-40 FPS. Many thanks for your efforts!
@vspecial1
2 жыл бұрын
I normally don't expect too much from these sorts of guides, however I gave this a try and wow, so much better than before! This is a fantastic detailed and well explained guide which really does help. Thanks for taking the time to put this together for the flightsim community! 👍
@chemistny
2 жыл бұрын
Thank u Q8. As usual, your videos are spot on not only on quality of content but on the topics. Well covered guide. Some people don't understand that there are many different pc configurations out there and it would be almost impossible for a single person to cover everyone's specs. Q8 explains in this guide what each function does, and how it works for his specs, the actual number on settings should still be experimented by the user to achieve their best settings. I really appreciate the time and effort you put into your content. Keep u the great work my friend.
@Q8Pilot
2 жыл бұрын
Thank you for your kind words and for really explaining what this guide is all about. I could not have said better myself. Appreciate your support always!
@thomasdean7563
Жыл бұрын
I have a 2080 Super with a i9 10850K 32mb 4.81 ghz (overclocked) and this worked SPECTACULAR for me... thanks so much for the updated video
@kirksunley1381
Жыл бұрын
I have just built a new flight sim pc and I used your guide as a starting point for my overall settings. Your video was very concise and gave the justification for your settings based upon experience, software and hardware. The 27 or so minutes was time well spent, and learning, to make an informed choice on a setting selection with the hardware/software and within the sim settings. Thank you for sharing this with the community!
@Q8Pilot
Жыл бұрын
Thank you for taking the time to write and thank you for you kind words.
@michaelnewy907
Жыл бұрын
Big thank you for sharing this valuable information. I used settings as suggested and now had butter smooth flights.
@Q8Pilot
Жыл бұрын
Glad this helped, thank you for taking the time to share your experience. Happy flying!
@griev0r
Жыл бұрын
Been struggling getting over 30 fps with a high end computer @ 2k res. This helped big time, thanks so much!
@Q8Pilot
Жыл бұрын
Glad it helped, enjoy MSFS =)
@jimbojames6401
Жыл бұрын
Loved this and managed to get from 32 FPS to 43 FPS using your tips. Then I did something that pushed my FPS up to 54 FPS with Ultra settings and live heavy cloudy weather and up to 67 FPS with clear skies. I renamed my community folder and created a new one. Popped a couple of liveries in for the default planes (Premium edition) and wow what a difference flying at that level of performance. I had a very full community folder with 3rd party aircraft, Mods, airports etc., now when I want my community folder back I just rename it back but with a slimmed down version. I have an i9, 2080 Super 32GB Ram.
@zeevut
2 жыл бұрын
I drank your words with great thirst. Followed almost to the letter every aspect and the result is great pleasure in enjoying my MSFS with suitable peripherals acquired less than a year ago. Your article is a cornerstone among the other data I collected. Thank you Q8Pilot.
@Q8Pilot
2 жыл бұрын
Glad this was helpful for you and thank you for your kind words and for watching the video.
@yosri617
2 жыл бұрын
Thank you Q8Pilot for taking so much time out of your busy day to come with these tips and sharing them with the community! These tips are really helpful.
@Q8Pilot
2 жыл бұрын
Glad you found this helpful. Thanks for watching!
@anthonyneave
2 жыл бұрын
If you're running MSFS from the Microsoft Store, you add MSFS to the 'Graphics settings' mentioned at 2:58 by selecting 'Microsoft Store app' from the 'Choose an app to set preference' drop-down menu, and then select 'Microsoft Flight Simulator' from the drop-down menu that subsequently appears below the first one.
@Q8Pilot
2 жыл бұрын
Thank you for your contribution.
@ebelechiemeke
Жыл бұрын
Many thanks. Still relevant and very useful even after the recent update. Thanks matey.
@Canadian76
2 жыл бұрын
That Power setting to high performance made a big difference for me. Also turning on Game Mode. I don’t have hardly any stutters anymore. Thanks for the video and tips
@Q8Pilot
2 жыл бұрын
Most welcome. Glad this has helped you.
@saadalhunaidi527
2 жыл бұрын
Thank you for all the helpful information on maximizing the PC performance which I am sure that most casual flight simulator users need.
@Q8Pilot
2 жыл бұрын
Thank you for watching!
@markgallego19
2 жыл бұрын
Thank you! Followed this to the T and it has improved my flight experience!!!! 🎉
@Q8Pilot
2 жыл бұрын
I am very glad this has worked out for you. Happy flying my friend!
@phjo5117
2 жыл бұрын
An excellent and highly useful video, the quality and relevance is spot on, a must-see for those aiming to better understand all those options and get the best out of the SIM. A big thank you for another great contribution to our flight simming world.
@Q8Pilot
2 жыл бұрын
Thank you for your kind words and for watching the video!
@tubeztoonz
Жыл бұрын
Thank you for this thorough guide. I have implemented your recommended settings and I’m getting good FPS, visuals and stability. Much appreciated.
@Q8Pilot
Жыл бұрын
Glad it helped! Thanks for watching!
@alancraig3053
2 жыл бұрын
I just wanted to say that your guide to improve the settings has been a godsend, I went through your video last night step by step and adjusted them accordingly. The results are astounding when compared to how I had them before. Thank you so very much for taking the time to put this all together as I could never get the look and the performance to balance out with such spectacular results. Thank you and keep up the great work. Love your channel!
@Q8Pilot
2 жыл бұрын
Great to hear! Thank you for taking the time to write and for watching the video!
@franckcagnes6370
2 жыл бұрын
Hey I loved you x-plane videos for tweaking and settings and really happy to find same content for msfs 😊
@cesargagneux8034
2 жыл бұрын
FARANCK
@Bluewater3272
Жыл бұрын
Your suggestions/tweaks have had a significant positive impact on performance. The simulator is smooth as silk and quite enjoyable. Just flew Martha's Vineyard to LGA.. one of my favorites short hops in the Daher TBM. My Specs i9-10900K CPU @ 3.70GHz | 32.0 GB RAM DDR4 - 3600 | TUF Z590-PLUS WIFI | NVIDIA GeForce RTX 3080
@Q8Pilot
Жыл бұрын
Glad this has helped. Thanks for watching!
@sauravsarkar3110
Жыл бұрын
Amazing content and very good tutorial. I had some of the settings made about a year ago which I think was causing performance issues, but your video cleared it all up and MSFS setup is looking brand new. Thanks for educating the flight sim community on the technicalities! Appreciate it very much and hope you continue to do such videos after major Sim updates, especially with changes coming through on DX11 and DX12. Thank you!
@Q8Pilot
Жыл бұрын
Thank you for watching the video and for taking the time to write. I truly appreciate it.
@panchoflies7910
2 жыл бұрын
Hi Q8Pilot! I listened to your excellent video and did some changes to my sytem. I have a ROG Strix GA15DH, AMD Ryzen 5 3600X 6-Core Processor 3.80 GHz w/ 16GB memory. My GPU is NVIDIA RTX 2060 Super w/ 8GB memory. I have a SAMSUNG LU28R55 28". So, nothing fancy! After I listened to you, I realized that, for 1 (one) year I had not taken advantage of the feature FreeSync on my display, as it is supported using the G-Sync feature on my NVIDIA GPU. The reason why I missed all that, was that I attached my display using an HDMI cable, not a DisplayPort cable 1.4! So now I do. MSFS 2020 SU10 is now soo much smoother! WOW! A BIG THANK YOU TO YOU, Q8!
@Q8Pilot
2 жыл бұрын
Glad this has worked for you. Happy flying and thanks for watching!
@panchoflies7910
2 жыл бұрын
@@Q8Pilot Hardly ANY stutter at 1440! kzitem.info/news/bejne/wHiV2YxtiHiCkqA I'm VERY happy, THANK YOU!
@vincentfuria7301
Жыл бұрын
Great Video, I was having issues with Carenado's Beechcraft D-18 with loads of continuous stuttering. This fixed the issue. Greatly appreciated, I will check out more videos. Thanks from KROC.
@michaelrebbin4989
2 жыл бұрын
Thank you so much!! I significantly raised my settings and got better FPS and fewer stutters after working your magic
@Q8Pilot
2 жыл бұрын
Thanks for watching! Glad this has worked out well for you. Happy flying!
@CyberSystemOverload
Жыл бұрын
Thanks Q8Pilot. As always this is right on point and you go through a lot of trouble and time making these guides for us. Thanks very much!! Will follow these instructions when Im on MSFS later!
@flyingsalmon
Жыл бұрын
Absolutely amazing video and walk-through...no fluff, great explanation, and what a beautiful cadence, vocabulary, and tone...you should also be on radio! Come start a new station or be a TV broadcaster in USA (ours been 'suck' ing for the past 20 years).
@Q8Pilot
Жыл бұрын
Thank you so much for your kind words sir. I am humbled.
@flyingsalmon
Жыл бұрын
Do you have any tips on how to make skyscrapers look less dystopian? Even with my newer nvidia 3060 card and bing maps on they look like burnt buildings during daylight...anything else I can try? Maybe in DATA options? Any tip is highly appreciated! Cheers.
@olip.6243
Жыл бұрын
You are the first person who recommended Game Mode on! I will try it.
@Q8Pilot
Жыл бұрын
Almost everyone who tried it reported much smoother experience and many cases more frames.
@cardinaldriver
2 жыл бұрын
New Subscriber here. I basically built my gaming PC just for the release of this title. I have done at least two core upgrades since. My fiancee ( bless her heart) had bought me an XBox One S because she knew it was to be available on console. Well, when that didn't happen (for a looong time) I picked up my old hobby of PC builds and Overcloclocking. Unfortunately I'm a hardware veteran but a software illiterate. I knew what the settings meant but just could never get the optimal compromise of realism vs performance. Ive watched this video twice today and have found it to be the most concise around. Just upgraded from a 1660 Ti to a 3060 12GB. While I've achieved pretty good results with 82fps (try getting that on the day one release, right?) , I still get the terrible micro-stutter with pan and zoom. Cant wait to get home tonight and try these settings (with lower values probably). I know they will work for me since I've never touched half of the settings that were shown here and your instructional makes perfect sense as in hitting my forehead and saying "Doh !". Thanks for the time you put into this. " You sir are a steely eyed missile man.". . Flight Commander on Apollo 13. I also hold a private pilot certificate w/complex endorsement and tail-dragger add-on. 2349 hrs. TT logged in type...177 Cardinal RG.
@Q8Pilot
2 жыл бұрын
Thank you for taking the time to share your experience and thoughts. I am very glad this has been useful for you. Welcome to the channel, and thank you for watching the video!
@countdavis
Жыл бұрын
Great settings tutorial. It improved my game performance & visuals. Great job Q8. Thank you for taking the time to sort this out 🏆✈️
@Q8Pilot
Жыл бұрын
Glad it helped! Happy flying my friend, and thanks for watching!
@BGLENN-dp4tx
Жыл бұрын
Well done. Now, headed off to see if these settings work well with my machine. Thank you.
@DNICE1983
Жыл бұрын
Thank you so much! your guide has dramatically improved my performance.
@Q8Pilot
Жыл бұрын
Glad this has helped. Thank you for watching and for your support over the past 5 years.
@DNICE1983
Жыл бұрын
@@Q8Pilot sir not only do I no longer have stutters. I have gained about 25 FPS.
@dtrjones
2 жыл бұрын
Another excellent and thorough video Q8Pilot. Great analysis. I'm going with DLSS Quality for now, as I fly in VR, this has essentially replaced the OpenXR Toolkit, so I don't use that anymore. I have kept DX11, as you stated DX12, this introduces stutters for me so not quite ready for prime time, but some content creators are saying it gives them smoother performance and higher fps. I'm not seeing it though. 👍
@seppo272
2 жыл бұрын
The game mode does make a big difference. Thank you!
@Q8Pilot
2 жыл бұрын
Glad this had worked out for you and thank you for watching the video!
@NGC008
Жыл бұрын
Excellent as always, thanks for all your hard work.
@dtotheatothevtothee
Жыл бұрын
Thanks for this. Love all your videos!!!
@supejc
2 жыл бұрын
You’re doing the lords work. Thanks for putting this together!
@Q8Pilot
2 жыл бұрын
Thanks for watching! Glad this was helpful for you. Happy flying!
@supejc
2 жыл бұрын
@@Q8Pilot I followed the guide for the most part and was able to up my visual quality with not as much performance impact as I expected (also, just upgraded to a 3070). The only area I deviated from your guide was using Nvidia control center for 16x anisotropic filtering instead of in game. For whatever reason, the NCP seems to do a way better job than MSFS does with this.
@jensnielsen5919
2 жыл бұрын
Great workshop and very thorough and helpful. Cheers Jens x Salmya resident
@diegorapal3435
2 жыл бұрын
Excellent video, thanks for sharing your experience, which requires a lot of testing time. On the other hand, I think you should add to the video, the considerations about HyperThreading on/off.
@Q8Pilot
2 жыл бұрын
Thanks for watching. I will consider this in a future video.
@Starfix00
Жыл бұрын
Bravo for this very useful video. It did help a lot. Greetings from France.
@Q8Pilot
Жыл бұрын
Glad this has helped. Happy flying!
@yankelbruno8042
2 жыл бұрын
Great video. Deep of field off gave me stutters. R7 5800 with rtx 3080.
@Q8Pilot
2 жыл бұрын
Thanks for watching! Glad it helped.
@modelrailwaynoob
2 жыл бұрын
I am fortunate. I ramp everything to max and MSFS and XP12 run very smoothly.
@Q8Pilot
2 жыл бұрын
Happy flying!
@DaveBrown1
2 жыл бұрын
Thank you very informative.
@Q8Pilot
2 жыл бұрын
Thanks for watching!
@albertbuira1751
2 жыл бұрын
Hi guy. First of all, agree your effort for share community your expierence and knwlogment. I own a little more step hardware you use, so your setup for MSFS was very similar to mine. Only i have changed, trying your recomendations, windows game-mode off to on, and in Nvidia control panel, MSFS settings, Vsync from Aplication controled to off. Some stability and sttuters works better so, many thanks again. Only one thing. After all changes, restart your system. Some changes in Nvidia CP works on registry, so if you dont restart, you dont have it. Cheers my friend.
@Q8Pilot
2 жыл бұрын
Glad this was helpful for you and thanks for both the tip and watching the video!
@steveflynn9279
2 жыл бұрын
Great settings video. Thanks for all your hard work. BTW do you every fly in VR? If you do can you share your VR setting?
@Q8Pilot
2 жыл бұрын
Thanks for watching and for your kind words. I do not fly VR sorry!
@antoniopettini9503
Жыл бұрын
Your experimental research is amazing and deserves a strong recognition from all of us. The matter is complicate and has a huge number of combination. I have a personal question: i have NVIDIA 4090 and 4k G-synch monitor, do you suggest to keep the TAA antiliasing option or migrate to diss quality/performance? Thank a lot for your help and work
@Q8Pilot
Жыл бұрын
Thank you for your kind words. I appreciate it. I recommend keeping TAA antialiasing for better visuals. Also, I highly recommend that you use the Ultra preset as it is. No need to change anything. I only turn off Lens Flare because I don't like it.
@Randomy5428
2 жыл бұрын
I have been using flight sims for a very long time. No matter how many tweaks you do the best option is to have the latest and fastest hardware if one can afford it.
@Q8Pilot
2 жыл бұрын
There is a lot of merit to the statement you make here for sure!
@seb3311
Жыл бұрын
thank you sir!
@biroleau
2 жыл бұрын
Excellent Job
@Q8Pilot
2 жыл бұрын
Thanks for watching!
@Ambient5oul
2 жыл бұрын
Thank you!
@Q8Pilot
2 жыл бұрын
Thank you for watching my friend!
@Mark-of2nx
2 жыл бұрын
Thx for the great video! Which add-on is the scenery at the intro and which aircraft? Looks amazing!
@Q8Pilot
2 жыл бұрын
Thanks for watching! The scenery is 42MX by Parallel 42.
@Wingsems
2 жыл бұрын
Thanks for effort
@Q8Pilot
2 жыл бұрын
Thanks for watching!
@DekelAmrani
2 жыл бұрын
It may be a good idea to note that this guide is running on windows 10 and not 11. Some of the options showed are not available in windows 11
@Q8Pilot
2 жыл бұрын
Thanks for watching! It is Win 10.
@rakon8496
2 жыл бұрын
Unfortunately i have to question the way you approach this. The necessary settings vary depending on your graphics card! Your tips are valuable for users of the same or similar GPU's, yet if users with weaker/better hardware use your recommendations they will come to very different results. Take the clouds: As you stated on a high-end GPU it doesn't impact the fps much, yet i can tell you that on a RTX3060 it will tank your system when you run it over medium settings./DX12 introduces stuttering because the LOD distances are higher then with DX11. Lower the LOD's and you get the same performance and comparable or better details/viewing distances. Thank you for your effort, yet i think the video would be more helpful if you would name it with a hint of the used GPU. THX 💙
@Q8Pilot
2 жыл бұрын
It is meant to be a guide. Results will vary from system to system for sure. Nothing wrong with the approach. On the clouds, I specifically mention that on my card it's fine on Ultra but this is to stress that Ultra settings is Wirth lowering other values. I hope you benefit from my video, but if you don't please smash the dislike button. P.S. All specs are in the video description.
@rakon8496
2 жыл бұрын
@@Q8Pilot Don't get me wrong, i am used to point out critique very directly, please don't take it as general critique - i like your effort and the video that came out from it, yet i am missing a clear statement at the beginning/in the title that it is for a specific tier. I am sure that the results are valid in that tier, yet without a clear statements it's easy to take it for general advice. Perhaps you could add something like "for Mid-tier CPU and High End GPU" to the title... Honestly the basic problem is the lack of useful description from Microsobo. Would they additionally give advice with each entry like "Higher settings are GPU heavy/CPU heavy or GPU+++/CPU+" would make it much easier and would reduce the time spent for endless testing. The smartest games have an included benchmark, analysing the system specs and recommend setting seen as useful to the user. Thank you! 💙
@user-md2ol8bq4s
Жыл бұрын
As always a great video, no surprise, your passion for flight sim is noticeable!! Would like to ask you please, some recommendation for AMD GPU user please. We have just adrenalin software and not the control like in Nvidia... I guess you will help a lot of people based on AMD gpu. I don t know why msfs is so oriented to Nvidia while they are very decent gpu. btw I have two crossfire 6800 xt and they compite with Nvidia at same level, thanks again!!!
@BokeFlyingSimulations
Жыл бұрын
Thanks Q8!
@alphatimca6656
Жыл бұрын
No joke, I think I have a FREAK pc. I am running 2k with everything on 65" samsung at ultra and 300 LOD with maxed out settings @ 35-45 (big city) and 55-60 (everywhere else). This is on dlss quality mode... I seriously dont understand it after watching people with 3070's and even 3080's not get as good as performance at 2k. Specs are 10700k OC to 5.0- msi Apro mobo- msi 240 rad- 2070 super, Over clocked +125 mhz and +650 mem - 32 G 3600 cl16 ram and a 650 PS. Any idea how? Then I see you with a 30 fuckin 90 using mid to high end settings! what is going on?? BTW I subscribed, good work.
@maduck17
Жыл бұрын
thank you a lot
@vonKleist
Жыл бұрын
In the Update 9 VIdeo u did not explain, how to get MSFS App in Graphic settings
@nicky6728
Жыл бұрын
Really great video. Not only suggestions but also explanations. Thank you v much. Two questions if you don't mind. 1. Do you think my RTX 3060 TWIN EDGE 12GB will accommodate these settings? 2. My instruments are blurry. Altitude numbers etc. Any ideas?
@Q8Pilot
Жыл бұрын
Thank you. With the 3060 you will have to lower your settings a bit to sustain steady FPS. The blurry textures can be related to many things but main culprit resolution in the sim settings and internet connection. It could also be that your settings are too high for your current GPU and CPU capabilities.
@blumac9801
2 жыл бұрын
Typically the HDR setting is greyed out if you don’t have an HDR monitor. Are you sure yours isn’t HDR?
@Q8Pilot
2 жыл бұрын
Yes I am very sure. I have another connected monitor with HDR hence the option is there but It has no effect on the monitor I use. Looks like a bug of some sort.
@RAVIOLIdS
Жыл бұрын
wow thanks a lot
@jeremyhawkins7496
Жыл бұрын
So I went to your update 9 vid and it did not show how to find the Microsoft Flight Simulator app. Can you forward that info. I've looked and looked. Thank you kindly
@edilier06
Жыл бұрын
Hi Q8! Are you going to be doing a setting video for update 11?? Thanks!
@Q8Pilot
Жыл бұрын
I am not sure I might.
@Superdelphinus
Жыл бұрын
On your setup I’d definitely recommend ramping your render scaling up to to 200 - I do that on a similar system (but with a 3080) and it makes a nice difference on the image quality. ‘2k’ is nothing to those cards and it’s the cpu that’s limiting your performance and changing mine to 200% of the resolution makes absolutely no difference to frame rates or smoothness - in fact in some conditions it can improve frame time as the gpu is not having to wait so long for the CPU. Flying through ultra clouds will tank it though lol.
@av8nz837
Жыл бұрын
Hey there do you have any recommendations for a 2060 with a ryzen 5 3600x?
@redwatch1100
2 жыл бұрын
Thanks. Good info.
@Q8Pilot
2 жыл бұрын
Glad it was helpful!
@redwatch1100
2 жыл бұрын
@@Q8Pilot I just made a flight after following these suggestions out at CYHZ with payware scenery. So far outstanding performance increase and better clarity. And that is in VR. It seems to work well for that also. Best performance I've had so far. Hopefully these settings will hold well in Manhattan. I'll check it out next. Thanks a lot Q8.
@jasonsteward6685
Жыл бұрын
Dude.. with u’r setting my game was locking like minecraft! Pixels anywhere.. i have a i7(7700k with rtx 2060), 24gbRam, 1t Md and stl don’t know what is rng… if I set all on medium in LAX (airport) 11 FPS.. on low almost 14 FPS. 😂So, what I don’t do right??
@MarconiMenezes
2 жыл бұрын
Great video as usual! Many thanks for doing all the hard work testing for us. Would you have any idea why my .EXE file properties have the "Disable Fullscreen Opt" and "Override High DPI Scaling" options grayed out? They are both set and I cannot change them to follow your recommendations.
@MarconiMenezes
2 жыл бұрын
Never mind, I figured it out. I had to click on the button to "Change Seetings for All Users" first.
@Q8Pilot
2 жыл бұрын
Glad you figured it out! Happy flying =)
@JulietS4
2 ай бұрын
Unfortunately made my stutters worse. Disabled HAGS kicked off Frame gen
@H.Witcher
Жыл бұрын
Nice indepht video - thanks. When I select the MSFS exe from Graphics Settings Browse, I get a Permission error. Similar if I choose to run MSFS in Administrator mode, I get an error and can't launch the game. Anyone knows how to workaround?
@MrAyton
2 жыл бұрын
thank you!
@Q8Pilot
2 жыл бұрын
Most welcome!
@andybrockbank3027
2 жыл бұрын
I followed the video to the letter but have not had a good outcome. As a flight continues the frame rate becomes very choppy with fluctuations in the order of 12 fps. I don't have AI Traffic loaded and have toned down a couple of settings such as render Scaling from 150 to 100 and TLD also from 150 to 100 but with no change in behaviour. I will have to revert my settings for all to default and start again from scratch. 😥
@VBHB83
2 жыл бұрын
Dude your sim update 9 video doesn't show us how to find the exe for MSFS so I can add it to graphics settings. Also I have a HDR Dell GSync monitor and when I turn off V-Sync it runs terribly. Best option I found is V-Sync on with 50% monitor refresh rate and it gives me very smooth performance.
@Q8Pilot
2 жыл бұрын
You can find it here \AppData\Local\Microsoft\WindowsApps
@anthonyneave
2 жыл бұрын
If you're running the Micrsoft Store version, you can add MSFS to the 'Graphics settings' by selecting 'Microsoft Store app' from the 'Choose an app to set preference' drop-down menu, and then select 'Microsoft Flight Simulator' from the drop-down menu that subsequently appears below the first one.
@ijazthegreat
2 жыл бұрын
For me changing to half refresh rate and DX12 has been a game changer for my performance
@ryan50231
2 жыл бұрын
Half refresh rate?
@Q8Pilot
2 жыл бұрын
You can achieve this via Nvidia inspector.
@ryan50231
2 жыл бұрын
@@Q8Pilot should I leave 100% refresh rate on sim settings and just change it in the inspector? Also if vsync is off in nvidia control panel can it be on in the sim settings
@WaterandCarbon
Жыл бұрын
How do much do you think the air traffic settings (end of settings) for people who don't use a separate multiplayer addon?
@chrismicallef6035
2 жыл бұрын
With latest Nvidia driver and DX12 i get better performance basically no stutters compared to DX11
@yankelbruno8042
2 жыл бұрын
Same here👍
@swally1933
2 жыл бұрын
Thank you for your great videos and help. I have found problems with Update 10 with Flybywire and 737-300 I can not get the rudders to work right I have uninstalled and reset the settings when I press the left rudder pedal the plane on the ground turn far to the right and if I press right it will still turn right I can not get it to work right. On other planes it works ok I do not understand the way to fix it.
@Q8Pilot
2 жыл бұрын
You will need to reverse the left rudder for this work. From the settings under the axis control, you can reverse the rudder. This should fix your issue.
@JavedKhan-qd8ik
2 жыл бұрын
nice
@Q8Pilot
2 жыл бұрын
Thanks
@MunurCYP
2 жыл бұрын
Hi Osamah, thank you my friend! And How is UserCfg/PostProcess settings? (Sharpen-FilmGrain etc..)
@Q8Pilot
2 жыл бұрын
Thanks for watching! The film grain are set to 0 already since SU9. I didn't have to make changes to it.
@eliasr2845
2 жыл бұрын
Since last Update Iam stuck with completly blurry Ground Textures in Ranges of over 20 Miles. Settings on Ultra with 50-60 fps. Also when iam flying the Ground Textures behind the Aircraft are instantly unloading. Never had this before Sim is unflyble now. Reinstalled it but no changes. Do you have any Ideas?
@kaese51
2 жыл бұрын
Why setting Vsync in NVIDIA settings to off ? I thought gsync is working together with vsync for the scenario that the fps going under the lowest (or highest) refresh rate of your monitor. In fs 2020 this is not an unusual situation… without any vsync option it could give a lot of stuttering… vsync fast + gsync works great for me
@Q8Pilot
2 жыл бұрын
GSync + Vsync together will more than like cause microstutters at least based on my testing.
@superman4856
Жыл бұрын
With these settings what kind of FPS are you getting at KEWR? For the life of me I can't get above about 23fps no matter what I do with a 3090 and 12900KF. Monitor is a 38inch ultrawide... Even sitting here at KATL I'm getting 25 in the 738. I'm in the teens in the Fenix and gave up completely on that one. Just curious
@Q8Pilot
Жыл бұрын
The airport wasn't there when I had the 3090 so I don't know. I have thr 4090 and getting about 95 FPS with the iniBuilds 310, about thr same with the Fenix and 105 FPS with PMDG.
@PowerAirSimulations
Жыл бұрын
Have you made a video on control settings like throttle pedals and yoke?
@Q8Pilot
Жыл бұрын
Unfortunately, no I haven't
@airbusgeek657
2 жыл бұрын
Hey nice video. But what about Re-Bar inside Bios settings? Did you tried it and any conclusion about it? Best regards.
@Q8Pilot
2 жыл бұрын
My MB does not support it.
@airbusgeek657
2 жыл бұрын
@@Q8Pilot I had this option shown, after a MB bios update. Maybe worth trying it.
@symol30872
2 жыл бұрын
@@Q8Pilot My i7 8700K MB got a BIOS update which enabled the feature. Doesn't seem to make a difference that I've noticed as I'm not sure whether MSFS has been optimised for Rebar use.
@WilhelmvonFahrvergnugen
2 жыл бұрын
Hi AirbusGeek. It is not enough just to enable resizable BAR for applications that do not natively support it, such as MSFS 2020. For this use case you must supply a profile(s). An easy way to do this is using Nvidia Profile Inspector, and selecting appropriate profiles from other games. See Panjno's fine tutorial: kzitem.info/news/bejne/rI17tp6loqZikno
@Virtpilot
Жыл бұрын
Thank you very much for the excellent video. I got a G-sync compatible monitor, would you recommend on that setting the Vsync off? Or "let the 3d application decide"
@Q8Pilot
Жыл бұрын
Set v-sync off from the control panel works best for me.
@Virtpilot
Жыл бұрын
@@Q8Pilot Thanks a lot, I'll do that.
@PlayerFalcon4
2 жыл бұрын
Under "Graphics Options" it wont allow me to add the MSFS executable to the list. Is there a workaround?
@carlodil1949
Жыл бұрын
Hi sir, I can't find the file flight sim…… from nvidia control panel
@Q8Pilot
Жыл бұрын
Please select it manually by browsing to \Users\YourUserName\AppData\Local\Microsoft\WindowsApps\FlightSimulator.exe
@nickkuyk
2 жыл бұрын
Hi Q8Pilot, thanx voor this upload, really helpt me a lot. I also have a 165hz monitor, msfs realy is buttery smooth now, but my pc is making a lot of noise trying to reach the 165fps. Is there a way to cap the fps without enabling Vsync?
@Q8Pilot
2 жыл бұрын
Yes you achieve this via the Nvidia control panel. You can cap your frames to an exact number. Look for max frames I believe is the parameter you need to enable and set.
@nickkuyk
2 жыл бұрын
Seems that capping it to max60fps via nvidiapanel did the trick. :)
@Claudinho571
Жыл бұрын
Hey, thanks for the vid. One question, is it still correct NOT to disable fullscreen optimization??? I was wondering where you got that info from? Thanks again
@Q8Pilot
Жыл бұрын
Yes disabling full screen optimization causes stutters for some reason after SU10.
@Claudinho571
Жыл бұрын
Thanks alot this actually helped me. Did you find this solution on your own?
@Q8Pilot
Жыл бұрын
@@Claudinho571 Most welcome, yes, I do extensive testing before making those videos.
@pm110978
2 жыл бұрын
Which Nvidia Driver are you on mate?
@Q8Pilot
2 жыл бұрын
The latest! 517.48 Game Ready Driver
@Britalex
Жыл бұрын
There is some fundemental issues with this guide I am afraid. Terrain and objects has diminishing returns over 100. Setting to 150 for "medium" machines is poor advice.
@Q8Pilot
Жыл бұрын
It is not poor advise. This is a guide which supposed to guide you only. Each machine is different. The guide tells you that Terrain objects will significantly hinder performance. Then you should experiment with what works for your machine. Also what is poor for you may be excellent for someone else. I certainly can't make everyone happy, but thanks for watching!
@DanWallace85
Жыл бұрын
Any suggestions for NVIDIA REFLEX LOW LATENCY - OFF/ON/ON+BOOST ?
@Q8Pilot
Жыл бұрын
I have it on and didn't notice any difference with it on or off or on boost.
@DanWallace85
Жыл бұрын
@@Q8Pilot Thank you. Great video!
@chrispaper
2 жыл бұрын
I have a gsync monitor. When I turn off vsync , I have extreme image flickering ! This only goes away when I turn on vsync and turn off gsync
@Q8Pilot
2 жыл бұрын
That's very strange, but if vsync works for you, keep it on.
@nickdesai6829
Жыл бұрын
Hi, tried all your settings and get 29 fps at best. I9 13900k with 4090 thoughts? Thanks
@Q8Pilot
Жыл бұрын
Do you have frame generation turned on? And DX12?
@nickdesai6829
Жыл бұрын
@@Q8Pilot yep
@P3ter777z
2 жыл бұрын
Thanks for the video! For some reason if I don't cap my refresh rate it leads to a black loading screen instead of the pictures it usually shows. Should I cap it in nvidia control panel? If so should I cap it at 60 frames or 144 frames (I have a 1440p G-sync monitor). Thank you so much for you help!
@Q8Pilot
2 жыл бұрын
Capping at 60 would make more since your situation. If you can, try to set up the refresh rate to 120 from the nvidia control panel, then do half refresh rate and see how that works. Do you have G-Sync enabled in the nvidia control panel?
@P3ter777z
2 жыл бұрын
Originally had g-sync enabled (v sync off) and refresh rate at 144hz in nvidia control panel. After switching it to 120hz it fixed the loading screen issue without a needing frame rate cap. Thanks!
@Q8Pilot
2 жыл бұрын
@@P3ter777z perfect. Happy flying!
@747AnanasBoeing747
2 жыл бұрын
Buy 4090 ... no Probleme
@charliebaker2056
Жыл бұрын
would you say my system is MED or HIGH end pc intel i7 10700k @4.7Ghz 32gb ram at DDR4 3200mhz gtx 3060 12gb with liquid cooled cpu TIA
@Q8Pilot
Жыл бұрын
That would be Med-High specs.
@charliebaker2056
Жыл бұрын
Sorry it’s a RTX3060 my mistake would it still be the case of MED HIGH?
Пікірлер: 248