Only 49 seconds into the video but I just wanna say I follow a few channels on all things msfs and your channel by far is the best mate, and your by far the most helpful, I hope your channel continues to grow, you deserve it one million percent, thank you for all your tips / hard work and keep it up 👍🏽
@2020fsers
Ай бұрын
Thank you so much . Glad these videos help out .
@Aza35617
Ай бұрын
@@2020fsers I’ve just followed the paging memory, I have 32gb of ram, I set the numbers you suggested 48000 and 96000 but when I hit enter it says the drive doesn’t have enough space and will grow to the available size space ,, it says space available 59780. I run the c drive on a 120gb ssd is this a problem?
@Aza35617
Ай бұрын
I’ll also add I tried also setting it to no paging file and as soon as I tried loading into an airport in the sim I got a msfs exception breakpoint warning :(
@2020fsers
Ай бұрын
@Aza35617 ok so you just need to adjust for your system so in your case set min and Max to the same size 48000
@MichelSimracer
2 күн бұрын
At first I taught with a duration of 31 minutes we have another youtuber who like to hear them self talking, what was I wrong, every second is informative and helps me a lot tuning my system. Thank you for your hard work!! Of course I subscribed to your channel. Edit: Finally a stutter free FS, from the start although FPS was around 60 always had a stutter and micro stutter, even on a fresh win install and only FS running. Never taught it was possible to run FS smooth till today. My GPU is not on a 100pct load anymore but around 80-90 on 4k with a 2080Ti and Ryzen 9 cpu. I got a virus warning on Pegasun (TotalAV), didn't do that tweek. I had Lossless Scaling already installed but FS stutters also on higher frame rates and was bit disappointed of how it work. Now it gives the last smoothness and the frames looks more sharp, amazing :). Blue sky's cheers from the Netherlands!!
@2020fsers
2 күн бұрын
Thanks for the comment ... happy it helped you . And thanks for the sub
@salmopr
6 күн бұрын
Now looking at my screen wow, this is awesome, thank you again
@2020fsers
6 күн бұрын
your welcome thanks for the comment
@salmopr
2 күн бұрын
@@2020fsers im still running with a i-7 10k paired with 4070 super in stock , no over clocking , no need to and , I know I'm not hitting the full power or the card but I'm getting over 60 fps , and I'm impressed, but lately I'm getting crashed with an error saying that it could be the overclock, which I'm not, running hot, which both temp are running below 50C , and this one about the dx12 beta, that should go back to dx 11 , ...all this being happening after the august 2024 driver update Do you have any recommendations, thank you
@2020fsers
Күн бұрын
@salmopr did you update your driver if so roll back or try a studio driver .
@2020fsers
Күн бұрын
Also dx11 may be better
@Buddy308
Ай бұрын
Lord of the Settings (LOTS) -- One Video to Rule Them All ‼️ I guess I can delete all the other ones from my KZitem playlists. Whether I do that or not, this is probably the only video I need to consult about non-VR settings because it comes with incredibly useful time stamps. I've never seen anything quite like it!
@2020fsers
Ай бұрын
Thanks buddy glad it helped 😀
@richardPalmisano
Ай бұрын
Thanks! Here is a little something for your channel. I really appreciate all your help that you are willing to give. I know it takes time for these tutorials that you do. And you always respond back ,So thanks buddy for all your hard work and keep them coming.
@2020fsers
Ай бұрын
Hey thanks so much Richard 😀 🙏 I really appreciate the donation. Glad I can help .
@richardPalmisano
Ай бұрын
@@2020fsers no problem my man wish I could’ve gave you more. Now that I’ve watched your video. I’m going to go look through some settings that I need to mess with I have a 4090 graphics card i9 13900k 32 gb. So which probably don’t need to mess with too many settings. But I do want to check out the hags on and off, not using frame generation. And I will probably try the auto FPS. What is your opinion on that? Are you using it?
@2020fsers
Ай бұрын
@richardPalmisano I don't use auto fps but the one I prefer is the dynamic lod tool
@richardPalmisano
Ай бұрын
@@2020fsers cool is that in the video or description cant remember lol
@2020fsers
Ай бұрын
Check the description for the video on auto fps and I that video will be the links
@giulianoromano5129
Ай бұрын
Thank you I recommend the lossless scaling tool is the best option!
@2020fsers
Ай бұрын
It is a great tool
@jamesmurawski44
Ай бұрын
I implemented these settings on my PC, and it has been fantastic! Solid 60 FPS or more in the Kodiak on my old Dell T3600. Thank you!
@2020fsers
Ай бұрын
That's great thanks for the comment
@FeldiSMC
Ай бұрын
This video is insane! So much tweaks i've never heard off. I went from stuttering 42 FPS (Fenix A320/heavy scenery) to 60 FPS (locked) all the time without lossless scaling! Gonna try to see a difference between game mode on/off, was previously turned on. Specs: 7800x3d / 4080 Super / 64gb RAM (6000/Cl 30) Thanks!
@2020fsers
Ай бұрын
Great results thanks for the comment
@u-bum
Ай бұрын
Most definitive guide I've seen! Thanks for all your work! ❤
@2020fsers
Ай бұрын
your welcome thanks for the comment !
@ateszbarat
Ай бұрын
Greatings to Mr Fazekas from Hungary
@NthgToFear
Ай бұрын
Great guide. Only suggestion I would make is on the virtual memory section. In my experience you want the min and max sizes to be the same to keep your page file from resizing and degrading performance.
@2020fsers
Ай бұрын
Thanks for the info . Yeah if something works for you stick with it . I haven't had any issues this way but I only play msfs so that may be why
@RhettKelly
Ай бұрын
Thank you again for combining all your performances enhancements in a such a well presented and informative way. It is much appreciated. So good to have this from a trusted source. Thank you.
@2020fsers
Ай бұрын
Your welcome and thanks for the comment
@Rolfhult
Ай бұрын
Thank you, great video!
@2020fsers
Ай бұрын
Your welcome thanks for the comment
@Tom-van-Rijnn
Ай бұрын
Thank you one more time! 🙂
@2020fsers
Ай бұрын
Your welcome .. next video part 3 on the yoke
@2020fsers
Ай бұрын
@Tom-van-Rijnn yes sir
@jamesm568
Ай бұрын
Interesting! I mainly go for visual pleasure so with the 4090 I render in 6K with TAA and Frame Generation with ultra settings maxed out on a 32-in 144Hz 4K monitor and it's been pretty enjoyable so far. Now in some cities I do have to back it down to 5K.
@blueline308
Ай бұрын
Thanks for not being an 'infomercial' channel. I am sick of being sold shit while the channel pretends to review shit.
@2020fsers
Ай бұрын
Yeah that's not me lol if I can't help I don't post. Thanks for the comment
@Synoopy2
Ай бұрын
Thanks for putting these type videos out. I have only been playing MSFS for 6 months but am struggling with ground studders. My computer specs are RTX 4090 and AMD Ryzen 7 7800X3d with 64g of ram. I do play exclusively in VR so that could be my issue. I have a Valve Index headset and use steam VR as my entry point. My studders are mild to moderate. Not sure how to tweak my system but I will follow what you have here and see if I am doing something wrong.
@2020fsers
Ай бұрын
Your spec should give good results especially In a valve index . Check out some of the tips that may help.you
@richardPalmisano
Ай бұрын
Ok you said for owners for the 40,000 series graphics card and frame generation to turn on hags what if you don’t use frame generation but you have a 4090 graphics card should you still turn hags on or off? Of course you know I am a VR user and only VR lol
@2020fsers
Ай бұрын
I would probably keep it off then
@richardPalmisano
Ай бұрын
@@2020fsersok oh and I’m using a studio driver instead of game driver now I find it is more stable so I have the latest installed. Thanks again.
@2020fsers
Ай бұрын
Yeah that's what I use
@homeslice55
12 күн бұрын
I run MSFS from Steam and am unable to choose Microsoft Flight Simulator everywhere you are doing so. MSFS is not a choice for me. Best I can find in "Steam". Should I be choosing Steam in these instances?
@2020fsers
11 күн бұрын
Yes you can do that
@scootermason2746
Ай бұрын
It seems the last few updates have started causing stutters in my system that I have not seen before.
@2020fsers
Ай бұрын
make sure to clear your shader cache and if you use rolling cache clear that as well . this may help that issue
@frankrose1500
24 күн бұрын
Regarding Nvidia Inspector: I use DLSS, but don't see it in the inspector options
@2020fsers
24 күн бұрын
Check out the more in-depth video that I've done on the inspector you need to insert an XML file the link is in the description for the other video
@ShawnMoss-w4j
Ай бұрын
I am getting all red in the Frame Rate Screen. I have a Asus Z790 Strix-E Wifi II. Intel i7-14000K. An Asus ProArt 4060ti 16gb Graphics Card. 64 Gb Ram. I'm unable to get any green when I spawn in the sim with or without add-ons. I'm wondering if I have a miss-matched system. Is the fact that I have a ProArt graphics card making any difference? I have also followed all the steps. I could use a little help. This channel is great for the information I need to run a smooth sim
@2020fsers
Ай бұрын
Thanks for the comment . Are you using the native refresh rate of the monitor? Are you using vsync ? Are you capping frames? If so please give me details to these questions. I can't offer any suggestions if I don't know what your current settings are the hardware really doesn't matter it's the settings.
@skipciman9097
Ай бұрын
I cannot find the dlss section on my Inspector settings. Any thoughts? Nice video as usual. Skip
@2020fsers
Ай бұрын
Hey Skip you probably didn't input the xml file into the profile inspector folder . Checkout my more detailed video below in that it will have all the links you need .
@skipciman9097
Ай бұрын
@@2020fsers Thank you.
@steveflynn9279
Ай бұрын
Thanks for taking the time putting this together. I can only imagine how much time it takes. WRT debloating the NVIDEA driver. When I update I disable installing GE Force and perform a clean install. I don't use any other driver features such as filters. Do you know if debloating is necessary if I do a clean install?
@2020fsers
Ай бұрын
Ok if you disable GeForce when you update then the debloat won't help all that much .
@2020fsers
Ай бұрын
Thanks for the comment
@steveflynn9279
Ай бұрын
Thanks. Have a great weekend. Cheers, Steve
@steveflynn9279
Ай бұрын
On a slightly different subject. I use a PiMax Crystal and I leave it powered on all the time. The battery stays charged and the screen does turn off. Do you know or have you heard if this is a good or bad practice?
@2020fsers
Ай бұрын
@steveflynn9279 you also
@ritiiq
Ай бұрын
My lossless scaling for me is a bit laggy with the mouse and I also get not a fluent performance with it. Any settings/tips?
@2020fsers
Ай бұрын
I guess the main thing would be to make sure that vsync is off and also check on the mouse check box in the user interface of the lossless scaling app to improve the performance of the pointer
@flywithme2211
Ай бұрын
🔥🔥🔥
@2020fsers
Ай бұрын
Thank you !
@BobSmith-st2ms
Ай бұрын
Question: With the Service Manager of Pegasun System Utilities, I noticed that when you close the interface, it still runs in the system tray (bottom right of the taskbar). Do you need to keep this running in the system tray in order to do its optimization or can you exit it in the system tray? i.e., do you need to keep this running before launching msfs 2020?
@2020fsers
Ай бұрын
Ahh yeah I should have mentioned that . You can close from system tray . Once you make the changes you are all good to go. Never need to open it again unless you add more app and programs to your pc then run it again to make sure those programs don't add services blindly running in the background
@BobSmith-st2ms
Ай бұрын
@@2020fsers Thank you!
@purcilas
Ай бұрын
I disagree with the page file size recommendation. You only need the page file if you run out of memory, which would be rare with 32-64GB of RAM so you could potentially be wasting storage space setting such high minimum values.
@2020fsers
Ай бұрын
Thanks for the comment . Like I state at the very beginning do what works for you. I have had people with 32 and 64 gb ram do this method with great results however if you are limited on space then you will need to adjust your settings for your system .
@tomc1380
Ай бұрын
With a 3090 or 4090 with 24Gb Vram (and in my case, 32Gb ddr5 ram) you shouldnt need to muck around with page file size. Because I have lots of room on my SSD drive, I fix my system file size to min/max 24Gb (24000mb) and this seems to work fine. In the past, using gpu's with less Vram, I've always sett the min = amount of Vram and max at that + 1000mb. Like everything, your results may vary, lol!
@2020fsers
Ай бұрын
@tomc1380 yeah every system is different some people need to adjust this and other don't.
@jefftaylor156
Ай бұрын
Regardings HAGS on or off on 4000 series Nvidia..... This onlyl applies if you are running DirectX12 right? I dont run it as it get screen popping.
@2020fsers
Ай бұрын
Yes you are correct
@davenicoll43
Ай бұрын
Hello, Following all your steps but ran into a problem with Nvidia profile inspector...I have the same version as you but I do not have the True HDR or DLSS options at the top, I start at Compatability...am I missing something?
@2020fsers
Ай бұрын
Yes you are missing the xml file that I put in the folder. Check out the more detailed video in the description for the links.
@davenicoll43
Ай бұрын
@@2020fsers Thank you, watched your more in depth video and realised...all good now thank you and keep up the good work, us non IT techies rely on you lol..
@donfrith3164
Ай бұрын
This is much different for Windows 11 and these instructions cannot be followed.
@2020fsers
Ай бұрын
I'm sure most of these settings are available in windows 11 however you may need to go through a different path.
@MusicBug12
Ай бұрын
After doing this i noticed no performance increase, and sky high CPU temps. Having to go back and undo everything said in this video. I seem to be the outlier here so idk but maybe be careful with some of these.
@rikswinn2956
Ай бұрын
Is it just for Nvidia cards or does this help amd users?
@2020fsers
Ай бұрын
Amd users as well except the nvidia panel settings .
@Despiser25
Ай бұрын
You had 245gb of storage available and used 192 on the page file? Not gonna do that, lol.
@2020fsers
Ай бұрын
I agree only do that if you have the space you will need to adjust for your system 😉
@daveeastwood3000
Ай бұрын
Hello, I've tried to download the Pegasun software but the download starts but then fails, anyone else have an issue?
@2020fsers
Ай бұрын
Try the installer download and see if that is the same
@daveeastwood3000
Ай бұрын
@@2020fsers Still the same. I can download other files from different sites, very strange
@2020fsers
Ай бұрын
@daveeastwood3000 possibly turn off any anti-virus or firewall
@daveeastwood3000
Ай бұрын
@@2020fsers NOD32 is finding an unwanted application so I'll leave it for now. Thanks for the help though
@2020fsers
Ай бұрын
Yeah some anti-virus apps will flag it not all . I've already talked to the developer about it. Norton 360 and another 1 he said flags it . The reason is because this app has the capability to change registry . That's why I only suggest what I go over .
@gs2162
Ай бұрын
My Windows version is not really giving me the option to change the advanced power settings… Windows 11 Here
@2020fsers
Ай бұрын
Ok you may need to skip that part then
@hendrixgonzalezchamizo6582
Ай бұрын
Very curious! after your instructions simlink doesn´t work anymore with MSFS and FSTL traffic injector freezes the simulator... FPS still low but my PC is 1000 times faster when it is about to restart...
@2020fsers
Ай бұрын
I also use navigraph but I have no issues with simlink and also fsltl and no issues . I'm not sure what could have caused this . Maybe in your startup apps or background apps did you turn off simlink?
@2020fsers
Ай бұрын
It's hard for me to help diagnose when I'm not sure what all you changed
@hendrixgonzalezchamizo6582
Ай бұрын
@@2020fsers I solved Navigraph and Simlink issues (I stupidly turned off Simlink from background apps), but I am having weird issues with FSTL even before watching your tutorial. My sim lose all fps (down to 8-10) and gets totally frozen sometimes while running FSTL engine (frustrating). Any good tutorial about FSTL traffic injector from your channel?
@hendrixgonzalezchamizo6582
Ай бұрын
@@2020fsers I got another question to you: Do you know what to do if my simulator gets frozen while running and I open google Chrome at the same time? It happens the same issue like when using FSTL Traffic Injector. Freezing!
@2020fsers
Ай бұрын
I don't have an fsltl tutorial but I would scale down all the aircraft . The default setting are to high imo.
@MorpheusRJSim
Ай бұрын
11:43 - it works with Edge also.
@2020fsers
Ай бұрын
Ok awesome great info thanks 😊
@bruhitsmoh
Ай бұрын
Hey how will this work with an rtx 2070, core i9-9900k and 16gb ram
@2020fsers
Ай бұрын
Should work just fine
@bruhitsmoh
Ай бұрын
@@2020fsers ahh okay let me try it out then I'll let you know how it goes
@richardPalmisano
Ай бұрын
hello my brother I am really wanting to try dlss frame generation and DLSS tweak mod but don't know how to install and set up for my 4090 and pimax crystal i heard that DLSS and DLAAA with tweak mod is the holy grail for graphics and performance in vr . i was hoping you have a video on that or if you can consider doing a video. i know it would be a great tutorial and the best one on youtube. so any info or thoughts would be appreciated.
@2020fsers
Ай бұрын
I don't prefer the dlss tweaks mod lots of bits and bobs to work through. I use the nvidia profile inspector that is very easy .
@2020fsers
Ай бұрын
kzitem.info/news/bejne/ppV8uJ6lcJN4mno
@2020fsers
Ай бұрын
In the profile I spector set your preset to e . And the that's it. Use the dlss dlaa option in the sim
@2020fsers
Ай бұрын
I use dlss quality when I fly vr with preset e .
@richardPalmisano
Ай бұрын
@@2020fsers ok so in the sim do i turn frame generation off and are you using dx12 and i have dlss swapper installed do i need that ? thanks buddy
@saminaneen
Ай бұрын
@2020fsers, When I try to put this, intoGame Mode, and then to graphic settings, I follow the path of This PC> Local Disk (C) >Users > Elite-R5 > AppData > Roaming > Microsoft Flight Simulator, and click (Desktop App) and then nothing, it will not do anything, how can I get it, to to show where you had the Microsoft Flight Simulator, and under it high performance?
@2020fsers
Ай бұрын
I think the exe is in the Xbox folder now
@saminaneen
Ай бұрын
@@2020fsers I do not have X-Box, and would never buy that toy, I have the Steam version, where is it ,? In the Steam folder, Thanks
@mikechenard9911
Ай бұрын
does the Lossless scaling application work in VR?
@2020fsers
Ай бұрын
No it does not
@mikechenard9911
Ай бұрын
@@2020fsers thanks for the fast reply. i use the Pimax Crystal and i certainly would like it if you made a similar video for those who use VR exclusively in MSFS. I am sure most would appreciate that also.
@2020fsers
Ай бұрын
@mikechenard9911 great headset check the description for my ultimate vr guide. I have also done pimax crystal specific videos if you are interested in that as well here is 1 of them and the rest in the description of that video kzitem.info/news/bejne/zWqd3ah9k5Z8bJw
@brettmcallister6635
Ай бұрын
Background apps setting is no longer available in windows 11. Any suggestions?
@2020fsers
Ай бұрын
I guess just skip that part
@DanandDragons
Ай бұрын
The cleanup image option is unknown when i try to run the Dism
@DanandDragons
Ай бұрын
For windows 11 it needs a different path i figured out.
@2020fsers
Ай бұрын
Ok cool glad you got it
@kartal2339
Ай бұрын
hi. i have a big problem with clouds if you look my videos (please watch at least 1080p) there are many shimmering pixel on clouds... i try many thing to solve but.. nothing change itry to play dx 11 closing FG still there ... i also try to change film grain in user.cfg ...All my driver and app up to date and there is nothing in the community kzitem.info/news/bejne/2meD1WSpnZaWiKg my spec: 7800x3d, 2*16gb ddr5 6000 cl36, RTX 4070 ti super game settings: 2k ultra TAA , FG on DX12B
@Garygang1887
Ай бұрын
Some of this is snake oil. E.g, the OpenGL settings do absolutely nothing for MSFS.
@2020fsers
Ай бұрын
We manufacture the stuff right out back lol
@josephgreen4217
Ай бұрын
screw up all my secnery even after system restore☹
@2020fsers
Ай бұрын
What do you by that. Can you be more specific. Nothing I went over in this video should have any impact on your downloaded scenery .
@josephgreen4217
Ай бұрын
@@2020fsers For some reason something changed my add on linker setting. found out what it was and fine now
@2020fsers
Ай бұрын
Ok glad you got it sorted
@maptrking
Ай бұрын
This is DUMB!!!! Absolutely STUPID to think you have to do any of this to make MSFS even half decent. SHAME on Microsoft! Shame on them!
@maptrking
Ай бұрын
HOWEVER - THAN K you man for investing the time into this! I know it's extremely helpful, and please - I'm not knocking you AT ALL! Not at all!
@2020fsers
Ай бұрын
Your welcome no offense taken ..
@saminaneen
Ай бұрын
@2020fsers, WHERE EXACTLY, does it show a link, for the /Online/Clean-Image/RestoreHealth, mentioned in timestamp 2:12, I could not find the exact wording of this anywhere, please help, Thanks?
@2020fsers
Ай бұрын
There is no link its a copy and paste section in the description
@saminaneen
Ай бұрын
@@2020fsers Thanks, it worked, great, just did not see, the ONE link, at the top
Пікірлер: 151