I already knew the problem with laptop, but without even replacing the power brick for the laptop. I measured the continuity of the positive of the jack to the one on the board. I got the part myself
@tennislass100
3 ай бұрын
Thank you so much! I knew this was my problem!!
@BMWPROGRAMMINGJAMAICA
Жыл бұрын
Great Job Bro
@miken.1437
Жыл бұрын
why skip removing the port?
@danfromtechnesia
7 ай бұрын
Because I can?
@vaitheeswaran.a5359
Жыл бұрын
what is male connector dimension for the charger
@JZLKRZ
4 ай бұрын
Your amazing man 👍😎
@ChromePlatypus-
Жыл бұрын
Hey, thanks for the vid but question. What are the two legs on the side of the port closest to the edge of the Mobo? Are those additional negative terminals? I assume you alternatively used the silver metal case of the component as a negative terminal? Thanks.
@danfromtechnesia
Жыл бұрын
Those 2 are grounds / negative and also to secure the port to the mobo
@ChromePlatypus-
Жыл бұрын
@@danfromtechnesia Thanks any tips you can give me for desolvering the DC port. It won't desolder. Tried adding flux and using a desoldering wick. Desolder wont liquify. Using a new iron at 480C. What temp did you use? Is that temp enough?
@Cineenvenordquist
5 ай бұрын
800° for that chungus. (Plus use flux, preferably a hot air rework thing.,) 800°C for the wings of your USB-C that need replacement too but down at 460°C for the leads, just enough that solder flows for ya, you're not soaking heat through a powerplane you see.
@EzaFayza
10 ай бұрын
whats happen if shorted?
@BMWPROGRAMMINGJAMAICA
Жыл бұрын
I have MSI GF63-9SC with the same problem, no charging from A/C adaptor. What model charging port should i buy? I live in Miami.
@danfromtechnesia
Жыл бұрын
Search for MSI GF63-9SC dc port on eBay and you will find the port
@r.1553
Жыл бұрын
Great video.
@wouter3879
11 ай бұрын
Hello nice video! I have one question. My mag 15 (thongfang chassis) laptop has the same problem. i have found the original charging port but really long shipping times. can i use same looking port with the same ac adaptor input of 2.5 mm inside/5.5 mm outside? Or does it have to be "original" otherwise i would just install a charging port from a different brand but with same characteristics. Thanks
@Cineenvenordquist
5 ай бұрын
Hey do teardowns of the old jacks and try repairing them. I mean, they're 20 cents or so in hundreds without reseller hijinks, but if the leaf contacts and springs inside aren't oxidized much and you're saving 6 days wait...
@Gray3ther
6 ай бұрын
What wattage is your iron set to plz? I have an 80W...just making sure that's not too much.
@Cineenvenordquist
5 ай бұрын
Not for power, you want to maintain 800°C to tin the legs of the socket that are inserted into biggish vias in the PCB (but which carry no current) plus beefy via connections farther into the case which do, plus the sense wire connection. You wouldn't treat a USB-C wiring connection like that even if it wrangled 230 W.
@DreadxBjinn
9 ай бұрын
if the metal part that secured the charger snapped is it possible to sodder it back on or do I need to buy another port
@red-o7
7 ай бұрын
Fwiw, i tried soldering but it didn’t work so well as the solder was brittle and the port needed some malleability due to the inherent force when we plug the charger in.
@bdubbs75
Жыл бұрын
My power cord on my will not stay connected good. I even replaced it.
@1LeggedGuy
Жыл бұрын
I have a gf65 laptop woth the same problem. The DC port is messed up. What is the part number for that dc port?
@danfromtechnesia
Жыл бұрын
You can search "msi gf65 dc port" and you will find the part. And to be 100% sure that you get the right part, you may have to open the laptop and check the DC port before ordering it.
@Okbagr
6 ай бұрын
Can you install a different dc port to a pc so you can use a different charger
@danfromtechnesia
6 ай бұрын
As long as it fits and doesn't have any other proprietary pins, you should be able to
@Cineenvenordquist
5 ай бұрын
Hah, if you wanted a reliable connection you could clean in an ultrasound tank you'd solder a LEMO connector or the like on...but ofc it would wag out from where the jack was and you get to change out the charger connector likewise. Have fun! [Plugs 18 kW Tesla charger into cooling/tilting bit under laptop.]
@Dexter101x
3 ай бұрын
Fucking hell, dude. Stop using autofocus with your camera
@SalmasSon
7 ай бұрын
Wish I could thumbs down this video a hundred times. Missed so much stuff
@danfromtechnesia
7 ай бұрын
I'm very sorry to disappoint you. If you're looking for tutorial video, seek somewhere else. It's never my intention to make tutorial or how-to video
@kerry-annemmartin1919
Жыл бұрын
If you want to factory reset take out CMOS battery rebuild plugin but don't boot up leave plugged in for 10 20 mins, unplug replace CMOS battery rebuild reboot remember to reset time and date in bios reboot again
@kerry-annemmartin1919
Жыл бұрын
If you want to see if there is a fault on the motherboard, then take out laptop main battery, plug laptop back in if it starts and runs without battery, motherboard is ok, if not, motherboard has a problem.
Пікірлер: 34