Bless you! I have been trying to get 2 touch screen monitors to work with one PC off and on for nearly 2 years. Finally YOU had the answer! Thank you so very much!
@rbarlow
9 ай бұрын
Glad I could help!
@jefftivo13
3 ай бұрын
So simple and direct. Exactly what was needed
@GibsonCRG
Жыл бұрын
Inspired by your own setup I got the touch screens a while back...and had to wrassle this configuration 'gator myself, but I promise you're saving a bunch of future enthusiasts a lot of trial and tribulations 🙂 Thanks for this concise guide!
@bleonardyou
Жыл бұрын
Russ: Many of your videos have been a godsend to this neophyte flight simmer. This one is especially timely since I’m getting ready to get my first separate touchscreen monitor. I’ve been using Air Manager on my touchscreen laptop. One thing that I’ve never seen addressed in the physical hookup of multiple monitors. I’d appreciate a video on physically attaching everything, including types of ports and the use of the Pluggable (another great video) versus a USB hub. That would relieve a lot of my anxiety going forward. Thanks for the knowledge you spread.
@rbarlow
Жыл бұрын
I recently did a video on setting up multiple touchscreen monitors. I think if you take a look at that you will have what you need to set up a working system. You will just need a video connection to the computer and the separate USB connection to carry the touch signals. It’s not that complicated, but the video addresses the part that trips most people are if you have more questions feel free to ask.
@KirkRoyster
5 ай бұрын
Finally, your video showed me how to get to the calibrate option for touch. Thanks so much.
@rbarlow
5 ай бұрын
Glad it helped
@blackjack6259
Жыл бұрын
Short and simple tutorial Russ. Perfect! Keep up the great work! I also enjoyed seeing you and hearing your honest feedback in the YawVR video.
@stevexplane11johnson87
Жыл бұрын
Good little tutorial Russ. I’ve learned a lot watching your videos Thanks
@norajean2754
8 ай бұрын
Thank you so much! That was quick, painless, understandable & effective.
@ivorevans1795
Жыл бұрын
Many thanks Russ. Might be that my touch screens are too old (ebay purchases) but when I go through that process it hasn't worked. They do work as touch screens if I set them to Primary so the touch is working. I will try again though. Appreciate how informative your explanations are!
@joshcrawford4588
24 күн бұрын
Thank you so much! This was extremely helpful and straight forward!
@skinnyTheCat
Жыл бұрын
Thank You Russ for all your great & valuable videos helping us getting the most out of controlling and immersion improving our flight sim experience! David.
@flightsimdeskuk
Жыл бұрын
You have a gift for teaching. Well done
@garyrasso6149
Жыл бұрын
Great tutorial. Hope to see you at Osh ‘23.
@rodpierson4444
Жыл бұрын
Precise and to the point … thank you Russ
@UrbanAnywhere
10 ай бұрын
Wow, sweet and straight to the point and IT WORKS!!! Thanks so much.
@Burxat
Жыл бұрын
Thanks! Super useful, straight to the point and clear explanation!
@benh2134
Жыл бұрын
Hi Russ. I have enjoyed viewing your videos and find them full of great info. I have been out of aviation for over a decade now and am moving back that direction hopefully as a career. I plan on using a sim to help get back into the saddle, particularly with IFR flying. I plan to use 1 main monitor and 2 - 15.6 touchscreens. My question for you is which flight sim would yiu recommend for my purpose - msfs or Xplane? Thanx again. Ben
@chrischaffee1316
Жыл бұрын
Russ, thanks for another well explained and detailed video. I'm currently building a flight sim for C172, using right and left dash panels created by those great guys at Altimeter Motives running Air Manager 4 on a 24" HD monitor for the left side, and on the right side, panel mounted GNS 530 on top of comms, AP and transponders by Propwash Simulations, all displayed on 3 - 55" 4k monitors driven by a RTX 4090. Realism is everything...my question to you, good sir, is how did you make the shade - hood on top of your panel? Or could you make a recommendation on materials to use? Many thanks again, Russ!!
@slownewsday1485
Жыл бұрын
Hi Russ. Great video as always. I was wondering, as I was reviewing some of your earlier videos of you testing your five screen sim setup with the modest computer you had at the time you were testing. Were you able to get your sim to operate nicely using just one computer or are you still using two? And if you were to update your modest pc you had at the time of your testing and were to upgrade your computer to a modest pc of 2023 standards like a Intel 13xxx cpu and a gpu 4000 series, would they be advanced enough to get you by on a one pc flight sim system? Or would you still be using two computers? Have things changed? And the question applies to either X-Plane 12 or MS Flight Sim 2020 flight sim software. Thanks. Take care.
@markjones5815
5 ай бұрын
This thing had me totally stumped !! Your video ended six hours of hell for me! Thank you, thank you thank you!
@shadetreehomesim
Жыл бұрын
One quick note on the “Tablet PC Settings”…it’s not always there. I had a 3 TV (55 inch) setup running two 15.6 inch touchscreens via USB to HDMI. Windows would randomly “lose” the tablet PC setup shortcut…so I had to dig to find the actual shortcut (that you can cut and paste) to put it in yourself. I can’t tell you how frustrating that was
@ragidyymann5109
Жыл бұрын
Love your channel
@Jack-he5zp
15 күн бұрын
Great video. Much appreciated. 😀👍
@kolian_mc
7 ай бұрын
Easy and brilliant explanation)))
@johnpanik7511
Жыл бұрын
Hey Russ, thanks for the info. Question… what size monitors are in this video. You seem to get a lot on them.
@rbarlow
9 ай бұрын
15.6”
@SerhiiDrozdov
Жыл бұрын
Thank you. It was a question in my head!!! Now it’s clear)
@Im_TheSaint
10 ай бұрын
Honest to god, an amazing video. This couldn't have been a better and more consise explanation of the issue. Do you have engineering background :D
@rbarlow
9 ай бұрын
Yes I have a BS Aeronautical and Astronautical Engineering from The Ohio State University … I told my kids don’t argue , I’m a Rocket Scientist😀
@muhammadHAIKALismail
4 ай бұрын
This used to work for me. Now, i get the occasional bug where my PC seemingly 'forgets' my settings. The PC was not put to sleep/hibernate and is active throughout. Tapping on screen 2 will suddenly give me responses on screen 1 instead. Even as i try to fix it in the calibration screen, tapping on screen 2 only gives me touch responses on screen 1. The only fix I have at the moment is to restart the whole PC, knowing at the back of my head that it is going to happen again within the next hour. This is really not an ideal fix for me as this is a work computer setup that requires me to stay live with both my touchscreens working. Any idea what I can do to rectify this?
@dimitriaerden1024
11 ай бұрын
Can’t thank you enough. You solved a nagging problem.
@rvchef3
Жыл бұрын
Russ, just about to build and setup a home cockpit for GA and 737's. Which size of touchscreens would you recommend? 2 - 15.6" or a 27? Or other size? TIA
@rbarlow
Жыл бұрын
Larger is better if you can keep your yoke in a good position
@rvchef3
Жыл бұрын
Appreciated sir
@whtfsh765
Жыл бұрын
Is a touch screen grid something you can buy or does this come with some monitors? I never knew this was possible. Thanks.
@rbarlow
Жыл бұрын
It is also called a digitizer and it is one of several methods to track finger touches on a screen. Your smart phone has one mounted on the display too. Older versions used infrared beams, that your finger interrupted, and both X and Y directions to determine where the finger was touching the screen. you can buy these frames and mount them on any monitor. Newer versions use capacitive touch where there is a series of very fine electrical conductors in a glass screen as senses the presence of the finger. Many of these support multiple fingers at the same time called multitouch.
@MeteorMarv
6 ай бұрын
Great video! But my system resets the calibration after every reboot. Did you ever had such a problem?
@rbarlow
6 ай бұрын
I suspect your second monitor may be set as the main monitor is not being sensed when things boot up so your computer makes the one it senses the main monitor screwing up multi monitor. Try swapping the main monitor designation in display settings. Also be sure to leave your monitors attached between sessions and have then powered at boot up.
@lassinakouyate7212
7 ай бұрын
Hi Dear ! Thank you for your awesome videos ! I would like to know how can i get some GA panels which will fit with 2 touchscreen monitors having right and left side panels views of aircraft panels. All the pay version of Air manager are made for only one screen (left side). I would like must realistic with right side views also. Will you please help ?
@rj2para
Жыл бұрын
❤ Thank you having just that issue
@poppadragon2006
8 күн бұрын
Thank you!
@alexandrsh2428
9 ай бұрын
Thank you a lot, you saved my day!
@ADHDan_
3 ай бұрын
Thank you sir!
@novagb6717
11 ай бұрын
thanks for the video, for me i can only ever set up one touch screen for some reason, i have a samsung g9 49" as my main display on a mount then 2 x 14" touch screen monitors underneath, if i do this, it will only set the first one i set as touch screen and never the second, but i want to have both as touch screen so its a problem, does anybody know how to fix this?
@MariePhipps-k8w
11 ай бұрын
I am running 3 55" screens plus two 15" screens for popouts with Air Manager on MSFS. I lose 15 FPS when I popout the two G1000 screens. The two 15" screens are connected to the computer by a USB to HDMI adapter. I am using a 4090 graphics card and an I9-14900 CPU. Does anyone know of a solution to this problem?
@Hugocraft
Жыл бұрын
Next quick tip video is how to setup prebuilt knobster versus diy Knobster then demo it.
@shryuken2105
6 ай бұрын
I was so excited to possibly have found an answer to this issue, but unfortunately i don't get anything when I type "calibrate". 😢 2:12
@jpr7365
Жыл бұрын
Hi Russ, in MSFS I cannot get the GNS 430 and 530 to pop out. I have the standard version and it's in the Pilaetus and Cap 10 planes. I have the avionics power on but the magnifying pop out icon doesn't show when I hover over with the mouse. Any ideas what I'm doing wrong or if you know that the standard edition MSFS don't let you pop out the GNS?
@Djeez2
Жыл бұрын
You have to press and hold the Right Alt key (to the right of the spacebar), often labeled AltGr on your keyboard. It should work also in the standard edition.
@jpr7365
Жыл бұрын
@@Djeez2 Yes I do that but it still doesn't work. The G1000 pops out fine though.
@jonathanweston2448
8 ай бұрын
Sadly, as many times as I have tried…. I just cannot get the two Hannspree Ht161HNB screens to work as two seperate touch screens at all in windows 11. Thanks for your efforts though.
@rbarlow
8 ай бұрын
They should unless they have a defect. Will they each work separately as touch screens? Will one work as a touchscreen when both are connected? Do they both show up as USB devices in Device Manager? What happens when you run the calibration as shown in the video?
@KPickford-wh7tl
Жыл бұрын
How are you setting up 5 monitors on a pc with only 4 video ports? I have been wanting to do this but can't figure out how to do that and be able to pop out and drag the avionics into air manager on the two touch screens.
@rbarlow
Жыл бұрын
Check out this idea. kzitem.info/news/bejne/15Cc4GanoqV7Z2U As for the pop outs are you using XP12 or MSFS? Either way it is easy.
@KPickford-wh7tl
Жыл бұрын
Perfect Thank you so much. Currently running msfs on 3 55in with i9 12700k and a rtx 3080ti. So I think it should be able to handle it fairly decently.
@97zx9rninja
Жыл бұрын
What touch screens do you use/recommend.?
@Thawadioo
4 ай бұрын
thank you ❤
@onecharliemike6022
Жыл бұрын
Nice
@alanhezekiah7555
8 ай бұрын
@alanhezekiah7555 • 2 min ago Does Air Manager create a separate panel for each touch screen, or a single panel, parts of which is simply dragged over to the second screen? Thanks, Alan
Пікірлер: 65