Oh, BIG INFO HERE: for anyone who gets one, be sure to REGISTER your machine. By registering the machine your 1 year warranty gets extended to 3 years. Considering it's an electric machine, a 3year warranty might come in handy.
@marypolancodesigns
2 жыл бұрын
OOOOH NICE! I'm pinning this comment. THank you so so much!
@rcarr48
2 жыл бұрын
Glad you said that I didn’t do mine. Wonder where the paperwork is!!
@judipalumbo
2 жыл бұрын
How do you register the machine? I have nothing that tells you to do that in the box and I sent an email to sizzix twice, but they never answer.
@bronwen.creates7931
2 жыл бұрын
@@judipalumbo Instructions on how to register it and a website link are included in the instruction booklet that comes in the box with your machine. Make sure to write down the serial number of your machine (it's on a label on the bottom/underside of the machine) and you will also need the date you purchased it.
@ker5776
2 жыл бұрын
Until you have to ship it back to sizzix for repair for $50
@lindarc8860
2 жыл бұрын
I have one thing to add about the Switch (I bought the white one in February). It does take all of the other Sizzix plates and platforms, but because of the "catch" function (when finished cutting, it will clamp down on the sandwich so it doesn't fall out) if you're using a smaller platform sandwich it can become stuck. Don't try to pull it out, just start another sandwich so it releases the stuck one (I hope this makes sense). Also, the plates warp just as bad, even with rotating and flipping.
@marypolancodesigns
2 жыл бұрын
SUCH great advice thank you so much for this!
@kathyhutchinson3058
2 жыл бұрын
I have had 2 of these machines and have returned both , the plates got constantly stuck and warped so bad after 5 weeks that they would not feed into the machine. The noise was so loud it sounded like a jackhammer, I took the first one back thinking it was a batch problem but the 2 nd one did the same thing. I waited so long to get an automatic machine and Sizzix is such a good brand but this machine was unfortunately a great disappointment for me.
@viviancoleman3948
2 жыл бұрын
@@kathyhutchinson3058 I have to say I've had my machine since Christmas and am totally happy with it (apart from the warping but I'm hoping the self healing mat from icrafter might resolve that). The noise is minimal and the dies cut well. Embossing folders are a bit more challenging as I have so many different kinds but ince I've categorized them all using calipers it'll be great.
@susanweber6861
2 жыл бұрын
Thank you so much! This just happened to me. I almost had a heart attack
@rtd1791
2 жыл бұрын
@@kathyhutchinson3058 First negative review I have seen. I’ve had reservations about buying the Switch. Haven’t made up my mind yet. Shoulder problems are forcing me to consider an electric die cutting machine.
@HPNana-
Жыл бұрын
Greetings to you all. I started making cards at the end of May 2023 and this hobby is expensive. I have been researching, comparing prices, reading reviews, etc. I decided to go with the hand crank Sizzex Big Shot and I ❤ it. We have frequent power outages down here and when it happens, I pull out my camping light and keep rocking and rolling. Maybe later, when I hit the mid 70's, I'll go for an electric one. 😂😂
@marypolancodesigns
Жыл бұрын
Brilliant reason! Nothing stops us!
@jeanmm2996
Жыл бұрын
Looks like the price has jumped in 2023. I guess that's what happens. Thanks, Mary! That's a great machine! Excellent review.
@marypolancodesigns
Жыл бұрын
Yeah that happens, and it does a lot with cardstock too. boo lol
@joannsanders242
3 ай бұрын
It’s May 2024, and I just paid $300 with tax. Ugh! I was shocked at the prices on here! 😢
@dianaperry583
2 жыл бұрын
I’m in the U.K. and played with my new machine today, I have 2 large 6 inch square dies that I have had for 5 year’s, and I got the first successful cut from one , I left the other til tomorrow , I have used 6 different cutters but non cut near the centre but I cannot fault what I did today,
@suklinkner8684
2 жыл бұрын
I was wondering why the title of this video makes one think you didn't like the machine, that's why you were warning us to watch it before we bought one ?????? But it sounds like you like it I'm glad for that.
@marypolancodesigns
2 жыл бұрын
Oh haha...thats me...Im the one that's been doing all the hyping! Lol. But I really do want people to see if this machine is for them before buying it
@judipalumbo
2 жыл бұрын
I stated that I just got mine from Hobby Lobby as when I ordered it, Scrapbook was out of stock. It is a pretty coral color not pink and not orange. It is called Sherbet and it is very pretty. It came in 2 days free shipping. I have only cut one die with it but loving it already.... Something I wasn't really prepared to spend money on right now but reading Mary's review after reading a bunch else where, I had to get it.... I will cry when my credit card bill comes.... That is ok, I can blame it on Mary! No, j/k! Thanks Mary and I hope others that are on the fence about it, when they can.... get it. Great machine and really pretty quiet, alot quieter that I expected. Thanks again Mary! (and for convincing me to spend more money..lol) 💖
@marypolancodesigns
2 жыл бұрын
The one you got sounds so pretty! I'm so glad you got a good deal! YES
@carolbatchelor5855
2 жыл бұрын
I never really considered buying this machine, but after seeing your video, I'm wondering if maybe I might need (yeah right) to get it. You've such an enabler, girl! Thanks so much for sharing this!
@marypolancodesigns
2 жыл бұрын
Hehehe...SO sorry! But I couldn't contain my excitement after waiting for so long!
@karentalbot4372
2 жыл бұрын
My plates warp REALLY bad. I purchased the large magic mat ($15) and cut it down to fit (so I could still utilize the full size plate) it works great, and I only need the one clear plate with it. I’m able to alternate my clear plates now to reduce the need of full replacement. To cut...I used my red rubber cutting scissors.
@marypolancodesigns
2 жыл бұрын
Thanks so much Karen. I am methodical about moving my plates each time I use them and putting dies on different spots. I have noticed a slow down in the warping.
@sheilagraber5577
2 жыл бұрын
I was lucky enough to get the pink machine as soon as it was released. Signed up for the notify me when it was on the coming soon area. Such a wonderful machine ❤️❤️❤️
@marypolancodesigns
2 жыл бұрын
YAY! Love this one so so much. SO happy you got it and love it
@kykategray
2 жыл бұрын
I had no intentions of getting the Switch. I have a Gem Jr, Big Shot, Vagabond 2, Sidekick and (my favorite) Tonic Tangerine. I was not even considering it! Not. At. All!! That is, until I watched your video. Now Mary, I know I should thank you (?!) but I gotta be honest, I’m just not there yet;) When the day comes when I have my shiny new toy (and my bank account is a bit lighter), I will reconsider. Until then, I will obsess over, find ways to justify and daydream about buying The Switch. Still sending hugs from KY.
@marypolancodesigns
2 жыл бұрын
Hahaha this made me laugh out loud! lol Well you saw how many machines I showed in the video...so you won't be hearing judgement from me. hahah
@MareeForman
2 жыл бұрын
Thanks for this Mary. I held off for a long time before buying an electronic machine. I finally bought the white switch and I love it. I love that I can still use by base plate and cutting plates from the big shot as well. Since they are cheaper to replace I will save the big ones for special projects😃
@marypolancodesigns
2 жыл бұрын
YES! I feel that it's the most all inclusive machine I've had. Love it so much
@marciataylor4077
2 жыл бұрын
Maree.......my plan, as well for the cutting plates.
@RijackiTorment
2 жыл бұрын
Before you spend your money, look at the warranty. You will invalidate the warranty if you use "incompatible" products. This term is not defined in the warranty with any examples and could be used to mean any non-Sizzix products (i.e. the wonderful Magic Mat) and could even be extended to Sizzix products not exlusively marketed for the Switch (i.e. standard cut plates or even Plus cut plates) or non-Sizzix dies (like the Spellbinders steel rule dies). The warranty also specifies that the machine can only be used for hobby-entertainment and not for anything commercial. Selling a card made with dies cut on the Switch and even just having a monetized KZitem review could be considered breaking the warranty. The warranty is 1 year from original purchase from an authorised dealer with an extended warrenty (terms of which are not on their website) of 2 years if you register the product on their site (and give them marketing data). Once the warranty is ended, Sizzix provides absolutely nothing, even at personal expense, to service their products. I recently broke part of the the handle on my Big Shot Plus that is more then 3 years old (I think 5) and their response was "maybe you should think about getting a new machine" even though the machine works perfectly fine (hopefully the repair we did to the handle will work for a few years). I like that the Switch does the bigger Plus dies ('cause I have a bunch from Tonic Studios) and the thick steel rule (I also have a bunch both from Sizzix and Spellbinders), I just wish they had better options for long-term support and don't contribute to the 'throw-away' economy with their policies. I understand they want to sell the equipment, but I'm sure the machines aren't the bulk of their business anyway (and I suspect they might even be a bit of a loss-leader).
@marypolancodesigns
2 жыл бұрын
AMAZING information! Thank you for sharing this! I will always keep one manual on hand JUST in case. Also if the power goes out, I will craft by candle.
@abigailfowler4728
Ай бұрын
Thank you so much for making this! I'm having to make a decision for my small stationery business. I truly appreciate it!
@marypolancodesigns
Ай бұрын
Thank you so much for letting me know it was helpful! YAY!
@cindyellis765
2 жыл бұрын
I had already made up my mind to get this machine so this video is a big help. It also gave me ideas for getting a couple of Bigs dies. Thanks a million, Mary!
@marypolancodesigns
2 жыл бұрын
YAY! You'll love it so much! I absolutely do!
@kcinca5410
2 жыл бұрын
I love my new Switch machine and was able to get it for a great price the day Tim showed his live on his KZitem channel. I love it and it's performed great EXCEPT Sizzix has not released a crease pad that works with it yet. I was very frustrated trying to run a TH Bigz L 3-D star die through it and it kept cutting the score lines. I tried all my platforms and all my plates. Needless to say I wasn't a happy camper but knew I still have my Big Shot Pro (which doesn't have enough pressure all over for intricate dies) which cuts AND SCORES that die beautifully. Sizzix is coming out with a new crease pad that will fit the Switch but I'm not sure when. Other than the crease pad issue I had nothing but a great experience with this machine. I got a turntable because of where I placed the machine but it really wasn't necessary. It really is a small footprint for such a large platform and I LOVE LOVE that all of my other Sizzix products will work with it. (Sorry, this was so long.) Happy you FINALLY got yours.
@laurabuehler
2 жыл бұрын
I think the Big Shot Plus crease pad should work...they are the same size. I've been told the cutting pads work in the Switch, so I would think the crease pad would work.
@kcinca5410
2 жыл бұрын
@@laurabuehler Sizzix's website specifically says they are making a crease pad for the Switch so I'm not inclined to order another which may or may not solve my problem. I have the extended crease pad which works fine in my Big Shot Pro. The Sizzix website says all the crease pads are 1/8" thick. I'm thinking the new crease pad for the Switch needs to be a bit thinner to avoid cutting instead of creasing but thanks for your input. And yes, all my other Sizzix platforms and various plates work fine in the Switch. The crease pad is the only thing I couldn't get to work properly and I tried EVERY combination of platform and plate that I have. 🤷🏻♀️
@marypolancodesigns
2 жыл бұрын
OH this is great information; thank you! I don't know what a crease pad is so I have to look into that. Thank you !
@kcinca5410
2 жыл бұрын
@@marypolancodesigns it's a soft plastic cutting plate to use with the Bigz dies (instead of one cutting plate) that has crease (fold) blades instead of cutting blades so you easily fold the paper for your 3-D dies. It's supposed to stop the fold blades from cutting the paper and instead only score them but the current crease plate is too thick to do the job properly. Hope this makes sense/helps.
@CardsbyMaaike
2 жыл бұрын
Thank you for the review. I am looking for an electric one as my arthritis and rheuma won't let me do it by hand for much longer I fear, but I have so many other things to get/buy first haha I want the black one. I love the concentration on your face at the partial cutting. that was my worry (that I couldn't do that anymore) so thank you
@marypolancodesigns
2 жыл бұрын
OMGoodness I was dying looking at my facial expressions through mirror reflection. hahaha I was so concentrated! lol I'm glad I kept that part in.
@JoanOrloffDK
2 жыл бұрын
Congratulations on your new machine YAY 🥰 I love it and if I didn't have the A4 Gemini, I would buy the new Sizzix machine. Great review Mary ❤ thanks for sharing and happy crafting Hugs xx
@marypolancodesigns
2 жыл бұрын
Thanks so much Joan! YAY
@sherlockhoka
2 жыл бұрын
Great job. Love this machine. You did not mention the additional cutting pads. The precision plate makes all intricate dies perfectly. It is one of the plates that solves a myriad of problems. Love the switch.
@marypolancodesigns
2 жыл бұрын
Thanks so much for this additional info!
@stamperssecret5379
2 жыл бұрын
Hi Mary. Cool machine. I went to Michaels and Hobby Lobby looking for die’s. Even the store managers didn’t know what I was talking about. The real kicker was that neither of them, nor anyone who worked there didn’t know what a Sizzix, or any other die cut machine was. Lol. They obviously aren’t hiring crafters for their stores. What a shame.
@marypolancodesigns
2 жыл бұрын
I noticed the same in Home Depot and Lowes, meaning they seem to not be training them about home repair. I guess the pool of people is low at this time for specific traits to hire
@ker5776
Жыл бұрын
They cant even find regular workers how would they be hiring “crafters”
@AnnieCappuccino
Жыл бұрын
JoAnn's has some dies, but not Sizzix brand.
@sherylosullivan9619
2 жыл бұрын
Thanks Mary. My Switch is on the way and I’m so relieved to watch your video to confirm I have made the right decision. I have a Big Shot and find it tedious to use. (I guess I’m just lazy) I’m really hoping that the Switch will manage some of my dies that I really struggle getting a good result with.
@marypolancodesigns
2 жыл бұрын
I am with you on the Big Shot; we are not lazy, we are efficient. haha
@rcarr48
2 жыл бұрын
I got the pink one a couple of months ago. I absolutely love it. One thing you didn’t show is that you can use your regular size Sizzix plates from the big shot. It’ll take any size plates.
@marypolancodesigns
2 жыл бұрын
Awesome add, thank you so mucH!
@pathamm5834
2 жыл бұрын
Yeap, I use my smaller plates from my crank big shot for small cuts
@barbluecht3500
2 жыл бұрын
Hi Robin I am waiting to get the pink one too… where did you get yours
@scubajenn5
2 жыл бұрын
I watched the TH release of this & then HAD TO HAVE IT!! Of course, it was sold out EVERYWHERE online. So, it was ony wishlist for when it came back in stock. Shopping at Hobby Lobby one day, there it was!! A beautiful peachish color (kind of reminds me of the new Saltwater Taffy color lol) & it was $100 CHEAPER than online!! It now has a home in my craftroom & I ABSOLUTELY LOVE IT!!!! I have the regular Gemini as well & I will keep it but, I do find myself using g the Switch MUCH more often. The Switch IS the perfect machine!! Thx for your insights & tips & tricks!
@marypolancodesigns
2 жыл бұрын
Ok someone else mentioned the coral color and I had no idea what they were talking about, it sounds glorious! YAY!
@colleensanderson6154
2 жыл бұрын
Me too! $199 got to carry it right out of Hobby Lobby. I am enjoying it Love using the smaller sandwich from my Big Shot Less time to go through :) And it doesn't drop out on the other side with the smaller either. Going to look into the magic mat. I didn't know they protected. Until I saw this video.
@DrgnflyDrmz
2 жыл бұрын
Just when I thought I didn’t need ANOTHER die cutting machine, now I know I need the pink to go with my purples and gold! 🤦🏻♀️😆
@marypolancodesigns
2 жыл бұрын
Oh no...hahaha I'm sorry! BUT that does sound like a glorious combination you have there.
@yvonneboucher9306
2 жыл бұрын
Thank you for this wonderfully informative video. And, I absolutely love your alphabet/numerical storage, very clever!
@marypolancodesigns
2 жыл бұрын
Glad it was helpful! Thank you so much for that!
@kathyparrish1442
2 жыл бұрын
At last! Something that works across all sizes. I have Bigz Dies as well and it is nice to see that they can be used in this machine as well as the hand crank versions.
@marypolancodesigns
2 жыл бұрын
RIIIGHHHHT?? LOL i was just elated!
@laurabuehler
2 жыл бұрын
I ordered a white one back in February for $169.00 plus about $18.00 shipping. I expected it to take a few weeks to ship, and that was okay with me, considering the price. There have been some problems with the white ones so...I still don't have mine. The company I ordered from called me last week & said they could ship a black one right away, or I could wait until early May for the white ones to become available. I opted to wait for 2 reasons: 1) the white one comes with some dies and other accessories that aren't included with the black ones. 2) I really don't care if a product has the name of a famous designer on it. The black one is associated with someone famous (no judgements for anyone who buys it; I just don't "need" a fancy name on mine). I may as well get the extras so I opted for the white one. I honestly don't care what color mine is, so it doesn't matter that much. (Although, pink is my least favorite color, so I would only choose that if there were some significant perks when getting that color.) I still have my Big Shot Plus, so I can still craft while I'm waiting for my new machine. I doubt that the company I ordered from will be able to sell them for $160.00 when they come back in stock...so, sorry to anyone who didn't get them when that company offered them.
@marypolancodesigns
2 жыл бұрын
I didn't even consider that but you're right you get more bang for your buck with the other colors. I got the black one because it was the one that came back in stock. haha But I suppose some would want a designer name on it. Thanks for that reminder
@karenjohnson3495
2 жыл бұрын
You can live without the extras.
@laurabuehler
2 жыл бұрын
@@karenjohnson3495 Yes, I can live without the extras or I can essentially pay more to get a designer's name on the machine. I chose the extras over the person's name.
@barbarahill6365
2 жыл бұрын
Oh, Mary! I have a Empress and a Gemini’ you make me want that too. I have the old steel dies which have been unused because I don’t have other machines! Thanks for a great tutorial
@marypolancodesigns
2 жыл бұрын
Thank you so much Barbara, I appreciate this so much!
@pathamm5834
2 жыл бұрын
I have my new machine and I do love it …. I hav torn rotator cuffs in both shoulder and suffered a lot when I would use my crank sizzix machine but now I can craft a lot and still sleep at night without throbbing shoulders ..you did a great review
@sweettreatsoverload4296
2 жыл бұрын
Unrelated but do some research on the following they have helped me so much. Msm, collagen, vitamin c , bromelain. These items have helped with pain. Please do tour homework. The only one that i had to watch was the msm you have to graduate increase it over time. Start with a very small amount take with vitamin c to stop any itching. It acts as a detox so if you get a headache cut back. If you start itching take more vitamin c to stop itching. It does make your hair grow so if your hairy it will make it worse. Im not hairy so it works great for me. So your research there are so many things to help with pain. I can get out of bed now. Hopefully you can find a routine to help yourself live a better quality life.
@marypolancodesigns
2 жыл бұрын
Thanks so much! I'm so glad you have a machine you love too! YAY!
@sylviaesposito4757
2 жыл бұрын
I put wheels on my Cricut and my silhouette. It helps move the machines around. The wheels are from Amazon. They have a sticky pad that holds them on, low profile.
@marypolancodesigns
2 жыл бұрын
WOW brilliant! Thank you for this tip
@sylviaesposito4757
2 жыл бұрын
@@marypolancodesigns I will look for the number on Amazon.
@sylviaesposito4757
2 жыл бұрын
@@marypolancodesigns 20 pack mini self adhesive caster wheels, non swivel casher
@sylviaesposito4757
2 жыл бұрын
@@marypolancodesigns I put one in the middle and two on each side. Rolls vey easily. Doesn’t effect the stability off the machine.
@viviancoleman3948
2 жыл бұрын
There was a white one in my local Spotlight so I snapped it up for a birthday present to myself even though it’s very pricey here in New Zealand. No regrets. The plates do warp so I saved up for spares which I had to import from England. And I am still having to experiment with the sandwich for embossing folders. Thanks for the encouragement to try partial die cutting and to use self healing mats. I would love to try a magnetic plate but am reluctant because of the electrical factor. I will try my bigz dies now though. Thank you Sizzix! Ps I did read somewhere to store the plates halfway through the machine to avert warping so I am trying that.
@marypolancodesigns
2 жыл бұрын
OOOH great tip thank you so so much for that!
@sylviaesposito4757
2 жыл бұрын
I made a magnetic plate for my Tim Holtz vagabond electric machine. It works great and cuts really nice with it .
@storyteller3927
Жыл бұрын
when I stored my plates half way through on my ordinary big shot my plates were eventually damaged so much I couldn't fix them or use them again.
@MaryMoisan
2 жыл бұрын
Thanks for the review Mary. I also want the TH black machine and liked what I saw when Tim demo it. IT's starting to show up at stores near me, but I'm not ready to buy yet. I really have to think about it. I got the Gemini Jr about three years ago and only used it a few time, before putting it away and going back to my old friend the Big Shot.
@marypolancodesigns
2 жыл бұрын
I love that you have a favorite! The Big Shot seems to last FOREVER. I'm hope as lucky with my Switch
@carolbostick414
2 жыл бұрын
I pre-ordered this machine online from a mom and pop store. It was at an extremely good price. They called to let me know that It wouldn’t be ready until probably mid May, but I could get a black one now. I opted to wait for the white one , she didn’t have the pink one. I can’t wait to get it! Thanks for doing this review!
@marypolancodesigns
2 жыл бұрын
Oh I love this! How awesome that you are getting one! It's like waiting for my new car we just got; 2 months because I wanted a particular color and model. lol Well worth it!
@pamelafernandes480
2 жыл бұрын
Sounds like we ordered from the same place. I have been waiting since Feb so I figured another month won't hurt to wait for my white one! So excited to play with it. I do so, so much for cutting. Have fun with yours ☺️
@pamelafernandes480
2 жыл бұрын
@@marypolancodesigns oh, enjoy your new car!!!
@BelindaBecerra
2 жыл бұрын
I’m in the same boat. I ordered from SMS. I’m waiting for the white one as well
@karenjohnson3495
2 жыл бұрын
@@BelindaBecerra You probably have it by now. Stacey ships them out after everyone goes home. A little bit at a time. That is the way she works. I have ordered many things from that store.
@user-uc7lo9qp2e
11 ай бұрын
Lynn Le Bel Thank you Mary! I just got an early Christmas gift my husband bought me, a white Big shot Switch!!!! I really appreciated watching this video and getting the tips. It gave me a comfort level to go and try it!!
@marypolancodesigns
11 ай бұрын
YAY! What a great gift! It's so fun and I use mine all the time.
@bernicegoldman8737
2 жыл бұрын
I love my Switch it has been a game changer for me. I was blessed to get mine for Christmas from my family
@marypolancodesigns
2 жыл бұрын
AWESOME Gift....hello! love that!
@created2bless322
2 жыл бұрын
Thank you Mary! The only draw back for me is that it is not made in the USA and that makes me really sad. Your review is great as usual, and I do want an electric machine this one may be it! I have a cricut and a brother scan n cut too but so many dies and the steel ruled ones as well, I have that alpha one, love it!!! Thank you again Mary!
@marypolancodesigns
2 жыл бұрын
Thanks so much for the encouragement and sweet comment. I do NOT use that alpha die enough and it was because I didn't want to pull out my big shot plus. hahah
@created2bless322
2 жыл бұрын
@@marypolancodesigns I have to crank style die cutting machines but they hurt my hands so much. I didn't know they would be so hard to use so I use them minimally. I have the fold up style but....NO!
@mn36
Жыл бұрын
I ordered the TH switch through my Local scrapbook store. Love it. Have used the magic mat with it too, no problem and my regular sizebig shot plates too.
@marypolancodesigns
Жыл бұрын
YAY love to hear this!
@caroleanderson1106
2 жыл бұрын
I have an Empress cutting machine and love it. When the plates get warped I just set them under the Empress to flatten them out. It has a magnetic mat that will sometimes warp, so I just stick it on the fridge for awhile. But, yes the plates are very expensive. I prefer the electric cutting machine, because I'm too lazy to crank them threw. Well done, Mary. I'm sure you will love your Switch machine.
@marypolancodesigns
2 жыл бұрын
I'm the same, I do not like cranking them through anymore. Over it! lol
@pquack51
Жыл бұрын
Thank you very much for this video. I think this would be a good choice for me and this video helped with my decision making!!
@marypolancodesigns
Жыл бұрын
I'm so glad it helped. I really love it so much!
@katewelsh1285
2 ай бұрын
Thanks soich for sharing. Im currently doing my research on this and your video has beem the most helpful 😊
@marypolancodesigns
2 ай бұрын
Oh that is so great to hear! Thanks for sharing.
@MovableNu
2 жыл бұрын
Great review! 👍🏾 I need little to enable me when it comes to crafting purchases. But I've been looking at electric die cutting machines that can handle larger than A5 cards. Thank you!
@marypolancodesigns
2 жыл бұрын
My absolute pleasure! Thanks so much, Lisa!
@carolstella6776
5 ай бұрын
Seriously considering getting this. The crank type is just getting harder as I get older. I’ve had good luck with everything Sizzix makes, and my BigShot needs to go into retirement. Wish you would have shown the results of the embossing folders though. Thanks for sharing.
@marypolancodesigns
5 ай бұрын
Great point! I need to do that but I will tell you they work amazing. They fit the super thick folders perfectly
@BelindaBecerra
2 жыл бұрын
Thank you for this you tube. Im so glad you got yours. I’m waiting and waiting for my switch. I’ve had the vagabond for awhile but it’s dying. So I need a new electric die card machine. I love that switch is wider. You gave a real good demo.
@marypolancodesigns
2 жыл бұрын
Oh thank you so much Belinda, I'm so glad it was helpful. I do love mine!
@BelindaBecerra
2 жыл бұрын
I got it. I like it. But sometimes it makes a real loud cracking sound. I know I know cracking is normal. But it scary
@stamperssecret5379
2 жыл бұрын
Nice to see you again. I learned a lot.
@reginabasart5080
2 жыл бұрын
I want to hear from your birdie. It was funny when you were unpacking, there were birds singing in the background. I can’t wait to get mine. T4s
@marypolancodesigns
2 жыл бұрын
SO many birds here in the morning I LOVE IT! lol
@marcydobbs1653
2 жыл бұрын
Glad you shared this now. A friend is looking and I'm helping her. She can get on the" notify me" list if she likes what you've shown. Thanks.
@marypolancodesigns
2 жыл бұрын
Marcy, let her know it's back in stock. If you want to share my link please feel free! It's an affiliate link so I'll get a small commission from it. :)
@juliebeard6424
2 жыл бұрын
Wow! Apparently its here in Australia! Oh my. But I have seen one cut fabric yet. I would get one. I have a old sizzix a crank handle one that I have never used!!! I also have a number of blades too and never used those too! Please make a fabric cutting video????
@marypolancodesigns
2 жыл бұрын
Hi Julie! I don't usually cut fabric but will add it to my list; in the meantime, see if someone has done that on YT for you already. It's such a great idea.
@vickigersey8138
2 жыл бұрын
Mary, if I didn’t have 6 machines already, I would probably buy this machine. For me the Gemini machine is a pain with all if it’s “sandwiches”. Thank you for your review.
@marypolancodesigns
2 жыл бұрын
Hahah...I hear you on the 6 machines. And I know about the sandwiches...too much! LOL
@jeanannmoale7295
2 жыл бұрын
Hi Mary, once again a super review. Thx so much for sharing, we can always depend on you! I'm interested in this machine, but I've got the patience to wait a bit for better pricing.
@marypolancodesigns
2 жыл бұрын
Good call; I hope it comes down a bit too.
@patomahony8244
Жыл бұрын
Thank you. I have been looking at all the different machine in Australia stores and online and there is not much choice and at the cost was not sure what was the best. After watching your review was bit happier. With the Sizzix taking the thicker dies, it should be alright with the 3D Embossing Folders. Hope it works with all brands of dies. Thanks.😃
@marypolancodesigns
Жыл бұрын
I dont' know the exact sandwich for that but I'm sure someone on YT has figured it out for the 3D embossing folders. I really do love this machine!
@carolynr.4227
2 жыл бұрын
thanks so much for the great demo. I currently have the Vagabond that I have been using for several years. My 2nd one. I will probably put my name on a Back in Stock list.
@marypolancodesigns
2 жыл бұрын
I'm glad it was helpful; this machine is awesome!
@dianelikestosew
Жыл бұрын
I'm so excited for you. If my body and mind can stay well. I will get one!
@marypolancodesigns
Жыл бұрын
YAY! And YES you will stay well, I believe it!
@shiguretakime
2 жыл бұрын
I love my pink one, I'm glad I held off buying other electric die cutter. TFS. 😊
@marypolancodesigns
2 жыл бұрын
YAY! So glad you love it.
@mandy.austin
2 жыл бұрын
God! Seems like we've been waiting for this ma hine FOR EVER!
@EricaFieldsfrogs4ever
2 жыл бұрын
Do you have one Mandy? It hasn’t been available that long.
@marypolancodesigns
2 жыл бұрын
SOOOO LONG hahah
@marypolancodesigns
2 жыл бұрын
I first saw it in Jan 2020 and have been waiting for it to come out.
@annihilator45
2 жыл бұрын
I love my switch! I have the cantaloupe colored and I am just so pleased with it!
@marypolancodesigns
2 жыл бұрын
Ooooh cantaloupe...is that the blossom or a different one.
@annihilator45
2 жыл бұрын
@@marypolancodesigns it looks like the color of a cantaloupe on the inside. I don't know the name.
@HeidiLilley
2 жыл бұрын
It looks like an amazing machine. I wish I could justify the price to make the purchase, but I have a gemini jr and a bigshot already and I do not make enough cards to warrant getting anymore at this point in my cardmaking career. I would get it if there was anyway I could. oxox
@marypolancodesigns
2 жыл бұрын
Oh totally, it's not a need particularly if you have something that works great. I know so many people asked me my thoughts on this.
@susanhammitt7080
2 жыл бұрын
I love my magic mats, saved me so much on plates.
@marypolancodesigns
2 жыл бұрын
Same!!! I can't wait to get my big ones! YEEEEE
@simonejosephson6462
2 жыл бұрын
Hi. I have been disappointed a few times by how these kinds of machines work over time. For example the Gemini junior has not hung in there for me. Can you do another look at this machine in a few months thanks!!
@marypolancodesigns
2 жыл бұрын
Absolutely thank you for that suggestion!
@bertas-cards
2 жыл бұрын
Great review Mary. This is one of the companies on my no buy list.
@marypolancodesigns
2 жыл бұрын
Thanks so much for the love!
@lizzystitch4842
2 жыл бұрын
Excellent review, Mary! Thank you! Now, I will wait a while for price and inflation to come down. Looks like this machine is well-calibrated so it won't break dies and warp embossing folders like my Gemini has. Grrrr!
@marypolancodesigns
2 жыл бұрын
YES this inflation costs are cray cray! lol Good call!
@karenjohnson3495
2 жыл бұрын
Yes the Gemini warps plates big time. I broke my first one and they wanted those plates back
@KarenLeanneCreates2024
Жыл бұрын
Mary, I just bought a peach one today from Hobby Lobby! I looked at it a couple weeks ago, and it was still there! But they don't have any more. I am also thinking of getting the Spellbinders hot foil machine to use with it, but am trying to have some self control! Anyway, thanks for your tips! The only die cutting machine I ever used was a 24" wide commercial plotter. We used to make advertising balloons and tents. I'm really glad I bought this, only it would be great to have it handle computer generated cuts. Only I don't want to buy a Crickut because it is a paid subscription. Still, I think I'll get a lot of options here.
@marypolancodesigns
Жыл бұрын
I think you have a lot of options here too! Also the color that you got is so pretty.
@angelaharnett6437
2 жыл бұрын
I really , really need the new Sizzix switch But I just can’t justify it at the moment as I already have the big Gemini and just can’t afford to buy something that I have a very near version of already . Enjoyed your review though.
@marypolancodesigns
2 жыл бұрын
Thanks so much, Angela, I appreciate you taking the time to say that
@angelaharnett6437
Жыл бұрын
@@marypolancodesigns up date , I lasted 5 months before I gave in and bought one . Now just have to move the Gemini somewhere lol x
@judipalumbo
2 жыл бұрын
Thanks Mary for doing the review. I REALLY WANT ONE NOW, but with having bought my Big Shot Manual Cutter and the Brother Scan and Cut in the last 3 months, I can not buy a Switch for awhile. 😢Maybe I can sell my Big Shot being I have hardly used it. Oh well, just have to wait and see.
@marypolancodesigns
2 жыл бұрын
I'm not suggesting this for you, but it's funny you mentioned it because I do have my Big Shot Plus for sale on FB. It would just cost so much to ship.
@judipalumbo
2 жыл бұрын
@@marypolancodesigns It is something you have to more or less sell locally. I have thought about it. I hate ebay but they seem to get decent money for their used units.
@cindydecker57
2 жыл бұрын
@@marypolancodesigns ha ha, I have my Big Shot Plus up for sale as well …. I expect there will be more of them for sale as people switch to the Switch 😁
@norinemueller4588
2 жыл бұрын
Ive hD MY BIG SHOT AND the big shot express for many many years still work great love Sizzix didn't see you do a emboss folder but Im sure the machine would do fine. Thanks Mary great review
@marypolancodesigns
2 жыл бұрын
Thank you so much for letting me know this! :)
@jenniferolson1449
2 жыл бұрын
I saw the switch machine reviewed on you tube and really thought I needed it (even though I already have the big shot). I didn't pull the trigger on getting one. After that I was at a crop and someone at the table behind us had one and it was SO loud! It was sort of disruptive to everyone in the area which is making me reconsider. Do you find how loud it is to be a problem? Thanks.
@marypolancodesigns
2 жыл бұрын
Hi Jennifer, the sound is definitely something to consider if that's not attractive to you. I don't mind it at all and find it a lot quieter than the Gemini.
@karenjohnson3495
2 жыл бұрын
@@marypolancodesigns I just got a new one a few days ago and I was so glad to have a quiet one. And your are right it is quieter then either one of my Gemini's. I got it off of Ebay!
@bertas-cards
Жыл бұрын
@Jennifer Olson If you want a quiet electric cutter. Look into the GoPower by Couture Creations.
@suesmith2353
2 жыл бұрын
Mary, thanks so much for sharing this video. Very informative and helpful 👍 I love learning from the experts and especially finding out what would work best for my needs. Keep up. The great videos and helpful tips. ❤
@marypolancodesigns
2 жыл бұрын
You are so welcome! Thanks so much for letting me know it was helpful!
@TheCreativeChica
2 жыл бұрын
Thanks for the review Mary! That's a beautiful machine. I wish I had room for it. Still using my foldup cuttlebug.
@marypolancodesigns
2 жыл бұрын
Oh I love that they fold up; i Have a Spellbinders like that; space saver
@karenjohnson3495
2 жыл бұрын
The cuttlebug is not strong enough to cut dies like the new Switch machine. I always cut on a different machine and emboss on my cuttlebug. I own three of them and I am glad I bought them before they stopped making them. Yesterday I just ordered my peach switch. It will be fun to use a new machine.
@Eydalia
2 жыл бұрын
I’m dying to get my hands on one and jealousy is killing me 🤣 The other day Hobby Lobby had ONE in stock for $199.00 BUT it was the peach one. I’m not a peach person so I decided to wait until the white one comes back in stock. Thanks for the great review 🤗
@judipalumbo
2 жыл бұрын
Peach is the only color Hobby Lobby carries, I am not sure if it is a signature color for them only.
@marypolancodesigns
2 жыл бұрын
I know, and I think had I not been waiting for 2 years I may have held off. lol
@Eydalia
2 жыл бұрын
@@marypolancodesigns I would go for the black, pink or white but the peach one I couldn’t deal with. As of today HL has a few peach ones so I will continue to patiently wait 😡
@Marcielle_Makes
2 жыл бұрын
In case you like to shop HSN, they have black available and they have their 3 pay option. I want this machine too but I have to wait. I’m holding out for pink.
@Eydalia
Жыл бұрын
Finally got the white one! I’m not allowed to use it until Christmas 😡
@BethCrafts
6 ай бұрын
The plates ARE HEAVY
@marypolancodesigns
6 ай бұрын
They are a bit yes
@arriettysbags
2 жыл бұрын
Thank you for this, I love it. Definitely on my want list.
@marypolancodesigns
2 жыл бұрын
YAY! yeah it's so so great!
@mpbailey18
Жыл бұрын
Very interesting video! Would love a Switch, but when I saw a screenshot from 7 months ago, that these machines were only $213 and now over $100 more, it irritates me! Guess I wait for the prices to settle....or at least for a major sale...
@marypolancodesigns
Жыл бұрын
Yeah that's no good! A lot of people have shared that if you can get it at Hobby Lobby it's only $200; not sure if that helps.
@mpbailey18
Жыл бұрын
@@marypolancodesigns Thanks...I will definitely check out HL!!
@mpbailey18
Жыл бұрын
@@marypolancodesigns Checked out HL...doesn't seem they even carry the machine any longer. Looked at Craft Direct..$280, no tax & free shipping. I just don't know this company though...
@Bellbirdblue
2 жыл бұрын
I’d love one but I have a dog who is terrified with certain noises ( like my heat tool). I’d have to be aware where she is every time I used this so sadly, it’s manual winding for me.
@marypolancodesigns
2 жыл бұрын
On no poor thing! No, good not to get one then.
@mia707
2 жыл бұрын
Great video. Great tips. The Switch is a must for me - when I can find it in stock. Also love the large alphabet die but can’t find it for sale anywhere.
@marypolancodesigns
2 жыл бұрын
Thanks so much Mia. No that large alphabet die is not for sale anymore unfortunately. Here is one that is very similar. shrsl.com/3npvx
@mia707
2 жыл бұрын
Thank you so much for taking the time to reply. I’ll check out the other die
@mia707
2 жыл бұрын
I’d even buy a pre owned alphabet die if I could find it.
@samanthastevens4763
2 жыл бұрын
I would love to hear how this compares to the Gemini
@marypolancodesigns
2 жыл бұрын
I don't have a 9x12 Gemini but how it compares to the Gemini Jr is it's quieter and my plates aren't warping as fast because of that sturdy base plate I believe. Still manual die cutting and the pressure is great on both.
@Karen-qf3rs
2 жыл бұрын
Love this machine. Pricy but we'll worth it.
@marypolancodesigns
2 жыл бұрын
I do seriously love it! YAY
@Kateseyes
Жыл бұрын
Wow, this is the first time I have seen this machine. I have the Gemini Jr and love that, especially since they came out with the green plates that you use to keep things from warping. You mentioned the black mats you used , I noticed it was smaller than your big cutting plates, do they make the black mats the same size to match the plates that come with the machine? Overall I think it’s a great machine, can fit much more than the Gemini Jr 😊👍 thank you for sharing
@marypolancodesigns
Жыл бұрын
I like the Gemini Jr. too I just rewally missed my bigz dies. lol Love both
@tracie70
2 жыл бұрын
Great video. Thank you. Will you replace your Gemini with the Switch? Is there a reason to have both machines?
@marypolancodesigns
2 жыл бұрын
Yes I did replace it; it's a lot quieter too in my opinion.
@anaramirez9813
Жыл бұрын
Mary could you make a comparative between this and the gemini? Are they the same???
@marypolancodesigns
Жыл бұрын
I can't do an exact video because I got rid of the Gemini. In short, the Switch is quieter and fits all dies. The Gemini is much louder and only cuts thin dies, not the steel cut dies. About the same size for the footprint though.
@laprofessora64
2 жыл бұрын
I'm commenting before I even watch it because the title of "hyped up" scares me...I already ordered one. I'm keeping my fingers crossed that your review is positive. lol
@laprofessora64
2 жыл бұрын
WHEW! I value your opinion, so I was worried there for a second. I can't wait to get mine!
@marypolancodesigns
2 жыл бұрын
Oh NO! I am sorry I scared you! It has been super hyped up so that's why I chose that. But glad to know you were comforted by my warranted hyped up excitement. lol
@laprofessora64
2 жыл бұрын
@@marypolancodesigns Well, and the "watch before you spend your money" also seemed to warn us not to. lol But then, I'm a rhetorical scholar, so I read into things all the time. Drives my brother crazy! LOL
@cindydecker57
2 жыл бұрын
@@marypolancodesigns Just so you know, I have to agree with her initial comment. The current title of this video seems to negatively imply “buyer beware …. don’t buy into the hype … don’t buy it” …. But your content/comments certainly indicate otherwise that it is a good buy.
@lindadinwiddie8453
2 жыл бұрын
Mine is being delivered tomorrow!
@marypolancodesigns
2 жыл бұрын
Woot woot!!!
@nancyloomis3046
Жыл бұрын
Hi Mary…Jan 2023 viewer here….love your reviews! I’m now considering getting the Switch. I knew I would get it at some point, but I’m having more joint issues and the cranking on my Big Shot is beginning to cause some discomfort. Sometime after Sizzix brought the Switch out, they changed it to “Switch Plus.” I vaguely recall Tim Holtz commenting on the name change in one of his fab videos, but can’t remember exactly what the diff was? I think it was a fairly minor change, but do you know? Thanks for this great review!
@marypolancodesigns
Жыл бұрын
From what I know, there is only one Switch. The other one might be the old Sizzix large platform electronic die cutting machine but the Switch is a new one. I'm sure they both do the same thing but for the Switch you don't have to hold the button, you put it in and it goes automatically. I don't know if the older one did that.
@lizzystitch4842
2 жыл бұрын
Question: How well does the Switch work with embossing folders? Does it cause major warping like my Gemini does? My Gemini has ruined every embossing folder I have put through it.
@marypolancodesigns
2 жыл бұрын
That's something I didn't even think to demo but will do a follow up to this. Thanks!
@cindydecker57
2 жыл бұрын
I have run several embossing folders through my Switch, both regular ones and 3D ones, without any warping of the folders at all.
@t.s8113
Жыл бұрын
Thank you Mary for the review. I have finally found the die cutting machine for me. I love it, although I didn't hear you say anyting about embossing. Does it emboss? Thanks for the video. ❤❤
@marypolancodesigns
Жыл бұрын
Yes you can emboss on it. The main platform has pictures of your sandwiches that you would use for embossing with folder. Great question!
@pamkenel7534
2 жыл бұрын
I thought if you use a magic mat with a sizzix switch machine it eliminates the warranty
@marypolancodesigns
2 жыл бұрын
YIKES you may be right! lol and I'm on video so I'm definitely not gonna get that warranty should I need it. lol Thanks for the PSA.
@ginaneely1147
2 жыл бұрын
I saw you at creativation that year, sad it's not in Phoenix because I live here. I remembered seeing the machine then and saying that the only way it could be better is if it auto adjusted thickness so we didn't need to shim anymore. Wouldn't that be great!? Unfortunately things have changed in my life so it will probably be a while before I can buy one.
@marypolancodesigns
2 жыл бұрын
Auto adjusting...yes that would be great! lol Wasn't that trip so long ago!? Crazy! I didn't go this year.
@ginaneely1147
2 жыл бұрын
@@marypolancodesignsI didn't go either, but maybe someday again.
@sarastevens7665
2 жыл бұрын
I found the black one in JoAnn too!
@marypolancodesigns
2 жыл бұрын
Woooohooooo
@michelegourd5742
2 жыл бұрын
I have been using mind and love it!! I also use my smaller plates from the manual sizzix machine and they work great!! Is there a difference between the magic mat and a cutting mat or are they about the same? Blessings my friend!!
@marypolancodesigns
2 жыл бұрын
Thanks so much! Yes all plates seem to g working just fine. woot woot!
@michelegourd5742
2 жыл бұрын
@@marypolancodesigns if the magic mat and a cutting mat the same ?
@cindydecker57
2 жыл бұрын
@@michelegourd5742 A Magic Mat and a cutting mat/plate serve the same purpose - you would use a Magic Mat in place of a cutting mat/plate in your sandwich.
@RickGrigsby1
9 ай бұрын
I guess I think most machines work well new, out of the box. What do you think now, a year later? Does it still cut thin metal dies well?
@marypolancodesigns
9 ай бұрын
Great question and good point. Yes it still works incredibly well and I am still using the same original plates
@MyNana58
2 жыл бұрын
Good. Know you use the that black mat with the Gemini 2. Can you show the sandwich you use please.
@marypolancodesigns
2 жыл бұрын
For the Gemini Jr, one way to do a sandwhich is: Cutting Plate Magic Mat Paper Die Cutting Plate Hope that helps!
@nellieambert4102
2 жыл бұрын
Thanks. Will try when I received my mat.
@GigisART
2 жыл бұрын
This is a great tutorial. I just bought mine. I haven't used it yet, but will now. Mary, what is the tape you're using for the dies? Thanks for showing us this.
@marypolancodesigns
2 жыл бұрын
Hi Francine, the tape is called, mint tape. Here it is: shrsl.com/36cij
@GigisART
2 жыл бұрын
@@marypolancodesigns Thank you. I just watched an older video of yours. 10 Hacks!! Mary, Mary, Mary!! You just help me with so many things. I'm a mixed media artist, and paper artist. Just started making cards. The stamp platform hack, the vinyl on the cutting board, and the CLIP BOARD!! 😍😍😍 THANK YOU!!!
@414cardsandpaperie
Жыл бұрын
Hi Mary, thank you for the great review. I love the alphabet die you showed could you let me know which die that was, I’d like to see if I could find it. Thanks again 😊
@marypolancodesigns
Жыл бұрын
Thanks so much Carolyn, That is from Spellbinders and it's called Type-Oh. :)
@myozbubble
2 жыл бұрын
I'm sold!! Now I have two hand crank ones to sell. :)
@marypolancodesigns
2 жыл бұрын
Hahaha I just put up for sale on FB! lol I don't have the space and I've grown out of my hoarding tendencies. lol
@lizfeltwakeman8055
Жыл бұрын
I see the plate says do not use for embossing. Can the machine be used for embossing?
@marypolancodesigns
Жыл бұрын
Yes you can emboss on it. The main platform has pictures of your sandwiches that you would use for embossing with folder. Great question!
@mavissmith9963
3 күн бұрын
Hi hi I have this machine and was using it and the plates started. Jumping in machine, scared the life out of me.anyone know why this would happen?
@lorirobinson7357
2 жыл бұрын
How would you compare this to the Gemini? I have wanting an electric machine for along time,and until just recently the Gemini was the only real choice. (Not counting cheapie no name machines). Still saving my funds for this purchase, but now wondering which in would be the better buy.
@marypolancodesigns
2 жыл бұрын
QUality is the same but the main difference for why I wanted it is the fact that it fits my BIGZ dies (the thicker ones) and the Gemini machines do not. They only cut think dies.
@lorirobinson7357
2 жыл бұрын
@@marypolancodesigns thank you very much. I have very few of the BIGZ dies, but this is good info to know. I appreciate you taking your time to answer.
@gotchaz45
6 ай бұрын
Use of anything except a Sizzles product, dies, embossing folders, Magic Mat, etc. will void your warranty. Ask me, the lady who spent $$$ for a machine that worked for two months. The plates got stuck in the machine, as I later saw on many KZitem videos, and even big strong men could not get them out. Since I sent a photo of the problem with my request to initiate the warranty and I had been using a Magic Mat, my warranty was voided. They then let me know that any product being used in the machine, other than a Sizzix product
@dpc-madebydpc
Жыл бұрын
Hello I’m new to the Sizzix world. What weeding tool are you using? Where do you get them? Also do you a video cutting thicker material such as faux leather?
@marypolancodesigns
Жыл бұрын
These are the 2 or 3 tools I use to week out my image. The sharp one with the curve and the silicone cup are a must for me now. It makes things so much easier. amzn.to/3KcTsKC
@sharonpeterson2137
10 ай бұрын
Thank you for the helpful review, really appreciate it. What tape do you use to secure your die cuts?
@marypolancodesigns
10 ай бұрын
I don't remember what I used in that particular video but this is my favorite to us: shrsl.com/494u8
@juliechamberlain9688
2 жыл бұрын
let me know when Cherry Bloom comes in. I just picked up Sizzix Big shot two days ago did not open it get from Hobby Lobby in NORTH CHARALESTON S.C. i have 3 fusion in my neck and Corple Tunnel surgery in my hand this machine will be a Blessing for this GRANT G- MA THANK YOU JULIA ❤🩹it is my BIRTHDAY GIFT from my husband .
@marypolancodesigns
2 жыл бұрын
I love the cherry blossom one; so so pretty. I really can't go back to a crank machine unless it's mini sized.
@jesseb5112
7 ай бұрын
Mary, I have noticed that currently you mainly use your Spellbinders hand crank machine. Do you still like the Switch?
@marypolancodesigns
7 ай бұрын
I still love my switch, it's just not in the camera frame because it's behind me on a desk across the room. the manual machine is right next to me.
@jesseb5112
7 ай бұрын
@marypolancodesigns That makes sense. Thank you!!! My Vagabond 2 is still working, but the pressure is becoming less. My next machine will most likely be the Switch. I use my steel rule dies frequently, and don't want a machine that won't take them.
Пікірлер: 374