im so happy that i found someone that is doing stuff with the 96s gts
@the_stable5534
2 жыл бұрын
I appreciate it! These cars don’t get enough love and mine definitely isn’t going anywhere!
@88TRUNKBACK
2 жыл бұрын
We only did the lower arms and coilovers on the 99 vert and it made it so much sharper on turn in, I think your gonna like the new setup
@the_stable5534
2 жыл бұрын
The k member is something I’ve been wanting to do for awhile so I’m happy to have it done. That’s good to hear, I think I’m going to like it too!
@TheModAddict
2 жыл бұрын
Great work, attention to detail and flow. Awesome content. Just subbed.
@the_stable5534
2 жыл бұрын
Thank you! I appreciate it so much!!
@71mrbigron
Жыл бұрын
Very nice Stang, keep up the great work!
@the_stable5534
Жыл бұрын
Thank you, and I will!
@pjcustoms8508
Жыл бұрын
BMR all day FTW!!! My 98 is running upper and lower adjustable rears, fronts with springs along with Kmember road race version and kmember brace. Love it! Nice channel bud. Subbed
@the_stable5534
Жыл бұрын
That’s awesome! I love BMR, it’s been great so far! Thank you, I appreciate it🙏🏽🙏🏽
@oscarcuevassn95saleemzr12
2 ай бұрын
Wow nice 👏 gorgeous car 🚗 🏁🏁🏁😎🤙🌞
@the_stable5534
2 ай бұрын
Thank ya!!
@vincentdelucia3583
2 жыл бұрын
Nice ass garage, bro!!
@DiablitoSpeedz
2 жыл бұрын
Cooo channel man ! Tuning in
@the_stable5534
2 жыл бұрын
Thank you, I appreciate that! I subscribed to yours as well🤘🏽
@superstallion97
Жыл бұрын
Nice video, if you ever decide to run your front sway bar in the future, get a steeda solid aluminum front sway bar bracket.
@the_stable5534
Жыл бұрын
Thank you for the info, I’ll be sure to look into that!
@twistedzx6rs796
2 жыл бұрын
Subscribed bro great video i stay in aurora just bought a 2000 vert gonna go twin turbo maybe we link up at a track day
@the_stable5534
2 жыл бұрын
Congratulations on the vert, twins will be awesome and that sounds great!!
@frederickorcutt481
2 жыл бұрын
YOU CAN TAKE A SOCKET THATS 1 SIZE TOO SMALL...TAP IT ONN WITH HAMMER...WORKS EVERY TIME
@vincentdelucia3583
2 жыл бұрын
What caster cambers are those.? I believe I have the same ones, but don't remember what company they are
@vincentdelucia3583
2 жыл бұрын
Torque specs on k member, too?
@jaydollar140
9 ай бұрын
Nice video bro ! How’s the bmr k member & control arms holding up
@the_stable5534
9 ай бұрын
Doing great so far, no complaints! I Think it’s about time I do an update video on them
@dobraydien7242
2 жыл бұрын
Your lucky you don't have an sn95 from the rust belt. My 04 is originally from New York now in the desert. I'll put it this way. The four big bolts for the k member were almost rusted in half....good vid
@the_stable5534
2 жыл бұрын
Wow, that’s insane! I’ve heard crazy stories about cars in the belt, I’m sorry to hear that. Thank you!
@cloudrhezii
2 жыл бұрын
Yeah definitely lol . Currently dealing with the same thing with my gen 3 coyote swap . The crush sleeves are almost gone
@TheModAddict
2 жыл бұрын
I went with the upr k member. Next i need to go tubular a arms and coil overs.
@the_stable5534
2 жыл бұрын
I seen that one as well, definitely another great option!
@TheModAddict
2 жыл бұрын
@@the_stable5534 i have a scheduled upload where i weigh the car. Mine is a 97 gt auto on a 125shot.
@the_stable5534
2 жыл бұрын
@@TheModAddict oh sweet! I’ll check it out, I just subbed as well!
@sergiodoordie319
Жыл бұрын
I have kooks headers I don't know if this k member would fit
@moisesaristy8572
2 жыл бұрын
Did you had the coils over stock adjusted to stock high? I replaced my K member with an Bmr and I putted back the stock high springs and they fit awkward, lowered the vehicle for about and inch or two. Upgrade the wheels to 18 inches and went up and inch .I will be replacing the springs with BMR 1 inch lowering springs and see if I could correct the awkwardness of stock springs.
@the_stable5534
2 жыл бұрын
I went with the strange coil over kit that is made for their struts. The kit comes with their own springs. Once we got them on the car, I just adjusted them to where I want the front to sit. I’m not sure how low that is but I know it’s lower than the stock springs
@moisesaristy8572
2 жыл бұрын
@@the_stable5534 Thank you, if replacing the springs doesn’t fixes it , that’ll be my next step. Thanks again.
@christianibarra9438
2 жыл бұрын
The k member was bolt on and go right? I've heard something about squaring the member. NIce Sn95 man.
@the_stable5534
2 жыл бұрын
We did square it up but it wasn’t anything to difficult. Pretty much bolt on.
@christianibarra9438
2 жыл бұрын
@@the_stable5534 okay good man. Any tips and tricks for the whole process?
@the_stable5534
2 жыл бұрын
@@christianibarra9438 honestly it was pretty straight forward so I don’t wouldn’t think about it too much
@michaelmendez9423
2 жыл бұрын
Where did you support the engine from?Kinda hard to tell from a phone
@the_stable5534
2 жыл бұрын
Not saying this is the right answer but we used chains under the headers haha
@andresd4710
2 жыл бұрын
What longtube header do u have?
@the_stable5534
2 жыл бұрын
Bassani mid length headers
@TheWhatthefuck12
3 ай бұрын
NICE VIDEO LOOKS GREAT!
@the_stable5534
3 ай бұрын
Thank you!!!!
@969Garage
28 күн бұрын
How wide are your front rims . Some people have problems with 9 inch wide wheels and those coils
@the_stable5534
28 күн бұрын
17x9, they are OME cobra rims. I haven’t noticed any issues. The car is down right now, but I’ll double check the clearance
@969Garage
27 күн бұрын
@@the_stable5534 I'm running 18x9 and don't want to run into issues
@the_stable5534
27 күн бұрын
@@969Garage yeah, that’s good to know for the future if I change the rims
@phillipgargus7813
Жыл бұрын
What spoiler is that on your red mustang
@the_stable5534
Жыл бұрын
fiberglassspecialtiesnv.com/?fbclid=PAAaY_bLNqeRusrJSrxQDhO8HFatAoXj5VDifBBPsrrzo9rmihuUMbLEeLAG0 Is where I got it from
@bobeech9728
2 жыл бұрын
How's the k member after two weeks? 😅
@the_stable5534
2 жыл бұрын
I have absolutely no complaints, I wish I would have done it a long time ago lol
@Mustangguy9702
2 жыл бұрын
I'm interested for my 02' gt. Will this work with LT's?
@the_stable5534
2 жыл бұрын
I would imagine so, I have mid lengths on mine. You might want to reach out to BMR to be sure but I don’t see why it wouldn’t
@robertfirl8828
9 ай бұрын
@@the_stable5534 The K-member you have is the KM731R, correct? Any increase in NVH driving on the street? No clearance issues with the Bassani mid length headers, correct? I am planning on using the KM743H next year or later on a 2001, with Bassani mid length too.
@the_stable5534
9 ай бұрын
@@robertfirl8828 I believe that is the correct part number. I just went on lmr and bought the one for my year that was without the spring perches. Front end is definitely more noisy, and stiff. Probably the coil overs more than anything. As far as clearance, I didn’t have any issues. It gave me more space. Overall I love it, I don’t have any complaints but I also on DD my car.
@theroadjack3437
2 жыл бұрын
Auto or manual trans ?
@the_stable5534
2 жыл бұрын
Manual, Stock T-45
@vincentdelucia3583
2 жыл бұрын
You didnt give torque specs on oil filter housing
@the_stable5534
2 жыл бұрын
I believe they are the SVE from LMR and the torque specs I think was only 20 ft pounds
Пікірлер: 64