I'm actually interested in a microscope with the least magnification level to read bills and checks, so your review where you actually took the time to measure the least magnification level is the best review I've seen so far. So many reviews car only about the maximum magnification, and I don't care about that because it's unusable for anything including soldering. I want to know the minimum magnification on these and how well they light and resolve the image.
@tomrhardwick
4 жыл бұрын
Interesting review, thank you. My tests show that the sensor is 2mp tops, and increasing the resolution in the menu (up to a ludicrous 12 mp) does nothing except a) make you feel happier, and b) uses up a lot more SD card space. The crude interpolation actually DESTROYS resolution at anything over 5mp, so beware. Nice machine for the price though.
@dbasic8223
3 жыл бұрын
I just bought this and a few other gear and I'm ready to start learning about repairing, my only problem will be my left hand which shakes a lot. Thanks for this review. 👍
@bigslick
4 жыл бұрын
outstanding review. You showed real use examples as to why the G1200 is functionally better (the tilting standing, more accurate focus, etc) vs the G600. So thank you, you answered the questions that I had about each microscope
@TinC33
4 жыл бұрын
Thanks
@gangleweed
4 жыл бұрын
Thanks for the clear and in detail revue.....even the inside which most if not all will ever see. I've just bought this one and was keen to see if any drawbacks or shortcomings were apparent. I'll mostly be using it for viewing the edge of lathe and mill carbide cutting tools before and after grinding so the big magnification will be a huge wow factor for me. It's currently going for A$120 post free on EBAY.
@TinC33
4 жыл бұрын
great idea to check the cutting tool, never think on that, thanks, $120 is a bit too much, banggood sell them for $66 from UK warehouse, check the link under video description.
@gangleweed
4 жыл бұрын
@@TinC33 Banggood's prices are in US dollars plus GST plus shipping.........you pay the same in the end, ask me how I know many times......the link shows Bangers price as US$72.28......that converts to more than A$120 that I paid on EBAY a week ago.
@TinC33
4 жыл бұрын
@@gangleweed ok you know, where you come from? I'm from eu and since they ship via eu prioroty line there's no need to pay tax and charges anymore wich is great we got everything for the price on banggood no aditional cost for eu countries.
@gangleweed
4 жыл бұрын
@@TinC33 So what is the conversion rate for EU currency to US dollars?
@TinC33
4 жыл бұрын
@@gangleweed almost the same
@GeoffTV2
3 жыл бұрын
Thanks for the great review, especially taking the trouble to measure the magnification. I have just bought one of these for home workshop use and the level of magnification is ideal for that purpose. Like you, I can't imagine why they think they can advertise it as 1200x magnification. It's just a blatant lie. Anyway, it seems to work well for my purposes.
@suromark
3 жыл бұрын
Thanks for the detailed review! I just ordered it. Some magnifying tool has been one of my longtime wishes for my DIY workbench.
@TinC33
3 жыл бұрын
It's usefull i use them here and there, but for everyday repairs would buy something better.
@suromark
3 жыл бұрын
@@TinC33 Yes, I just wanted something that lets me inspect things a bit closer than the watchmaker's flip-lenses headband I'm using at the moment (though stereoscopic vision really helps with soldering; going to see how good/bad it'll work out in the end). Should arrive by the weekend...
@Ojref1
4 жыл бұрын
Thank you very much, this is one of the best YT video reviews of this microscope thus far. I've recently purchased one for home lab use, and I'm hoping it has a hidden menu to adjust things like screen color/gamma etc. I also ordered a Micro SD to SD card converter and extension cable, which should eliminate what others have complained about regarding difficult card removal. Also, there are some reports that if connected to a PC running Windows 10 via USB, it can browse the SD card storage and use the camera (detected as a webcam). Curious if the author has tried that yet.
Very cool review, I'll be buying one of these. Thanks for a very complete review!
@jothain
4 жыл бұрын
I think your spoken English is very good and clear. At least in my opinion and I'm not native English speaking person.
@TinC33
4 жыл бұрын
thanks
@WhoaMykey
11 ай бұрын
Great content brother I just bought this before I seen this and look forward to use your teachings on this ❤
@DrFiero
4 жыл бұрын
Mine showed up a couple months ago (during one of their ~50% off sales!). It’s been really useful.
@TinC33
4 жыл бұрын
actualy can't imagine how usefull it is until i broke it :)
@DrFiero
4 жыл бұрын
@@TinC33 - Thats sad. :(
@TinC33
4 жыл бұрын
@@DrFiero that 5" now i got better 7" :)
@hairulole
2 жыл бұрын
Hows your G1200 Sir? Is it still good?
@zikermu
3 жыл бұрын
Your demonstration work is really professional quality. Thank you very much for helping us position ourselves. Slovenia seems a very beautiful country, I hope to visit it as soon as the COVID is gone.
@TinC33
3 жыл бұрын
Thanks & welcome to Slovenija
@edjunis2703
2 жыл бұрын
hi thanks for your video . very helpful. Mine just arrived and it came with an angle adjusting bolt that has to be losened with a 12mm spanner. A bit difficult to do, It would have been better to have with an adjustiong knob.
@adventureadventure5864
3 жыл бұрын
can we later adapt our position while soldering and at the same time watching the screen?
@ho3einsoltani505
Жыл бұрын
Thanks for perfect review. I have g600 and the same issue exactly as you said.first time unbox it didn't have charge and I charged it with fast charger and never powered on.i couldn't use it even 1 minute. Do you have solution and did you solve g600 problem?I think cpu damaged
@toddclark7649
3 жыл бұрын
Could you please exexplain the procedure to take a photo. I have a G1200 but am having difficulty taking a photo. Thank you for your time!
@TinC33
3 жыл бұрын
Just set to take photo not video and than take it with single push on button.
@studioMYTH
3 жыл бұрын
Thanks for sharing! I just bought one of these to look at tiny animals with students. I'm worried the magnification is not powerful enough because they lied about magnification.
@TinC33
3 жыл бұрын
Yes that's why i measure caliper under and get the result 100x max, i really don't understand where they got 1200x magnification, same as batter on battery toolls wich show 90 or more volts, but they are much or less 18v...
@stremix-rock
3 жыл бұрын
@@TinC33 Because they calculate the magnification squared. For example, a 5x5 area fits 1000 times into a 500x500 image. Thus, the aspect ratios are only 100 times, but the area is 1000 times the original. After all, it doesn’t matter which one the manufacturer writes, but it sounds better and easier to sell.
@TinC33
3 жыл бұрын
@@stremix-rock true like the diode lasers i tested they advertised as electrical power instead of optical power, thanks for explonation
@tomk2468
2 жыл бұрын
Excellent video. Thank-you. What about connecting the microscope to a PC? Is there software to download to take measurements? That’s what I’m looking for. Thanks, again!
@TinC33
2 жыл бұрын
Not possible to connect on pc.
@isidoromaich7226
4 жыл бұрын
Great upgrade to your workshop and excellent review
@TinC33
4 жыл бұрын
thanks Isidoro
@YellowPurple
2 жыл бұрын
❤❤❤
@dumbcat
3 жыл бұрын
thanks for the good review. can you leave the power cord plugged in all the time or do you think that would ruing the battery?
@TinC33
3 жыл бұрын
Thanks, you can because there are lipo bms circuit insidr, so when the battery reach 4.2v it plug off the power supply and turn on the green light, but still recomend discharge the battery time to time for it's longer life.
@creativ01
4 жыл бұрын
Nice brief review with all important informations. Thx!
@TinC33
4 жыл бұрын
Thanks
@michaelkeymont501
3 жыл бұрын
I think your English is excellent.
@TinC33
3 жыл бұрын
Thanks
@theboss1078
4 жыл бұрын
Mustool is an importer spamming thier promotion videos everywhere, get the cheapest G1200 you can but beware if you need a battery as some come without but its unlikely you will need this feature unless your buying for a child, you can connect to a pc by throwing away the power only micro usb cable that come with the G1200 and using a proper micro usb data cable. Picture is amazing and perfect for solder work
@michaelk6957
4 жыл бұрын
Thank you for the review. So this microscope can replace an optical lupe with 3x, 5x and 10x magnification right? Thats the range i need for my work. Most other products start at 20x magnification. What would be the Andonstar alternative?
@gangleweed
4 жыл бұрын
LOL.....once you view something with this microscope you won't jam a loupe in your eye socket again.....I have a 10X loupe I used for tool point viewing in my last employment.......attempting to solder a small component means you practically burn your nose of with a loupe......the 3D effect with the screen at an angle does give you a huge perspective advantage.
@mariberbagiinformasiagusin4467
4 жыл бұрын
Thanks
@jerardlwidig6211
4 жыл бұрын
Excuse me for my bad english, but I'd like to know how much time does it takes for a full charge, and how I know when it's charged. I have one and the red light during charge never switch off. Thanks for the video.
@TinC33
4 жыл бұрын
It charge about 2hour, but the "charger" on built in circuit is cheep so red led glow almost all the time even if there are only few mA of consuming, red led turn off but need looong time, try to leave over night and it will turn off, that time ghe battery will be 100% full, but if you charge for 2hours, battery will charge to about 90-95%
@udrescuovidiu3599
7 ай бұрын
How I can capture the image?
@joaobatistadepaulaneto2210
3 жыл бұрын
Does somebody know where to get the schematics of this microscope? I have two of this that stopped working just a couple of months after arrival with problema in the board.
@_Piers_
3 жыл бұрын
Thanks! :)
@mrstanskaggs1
3 жыл бұрын
Can the video port out to a PC or monitor? I see the USB port as a charger, and have heard that there is software to interact with this microscope..
@TinC33
3 жыл бұрын
I think not and didn't try it but someone comment that it work.
@ChadLuciano
Жыл бұрын
Awesome review.
@hughjanus6975
3 жыл бұрын
how is the lag? I count a 5 frame difference between you moving and the screen responding.
@TinC33
3 жыл бұрын
Sorry forgot to test that, but it's ok to work comfort, didn't use it for a while.
@palaniyappanjayakumar3937
3 жыл бұрын
How to find out exact 40x magnification?
@rosariaconilsorriso4314
2 жыл бұрын
Great review. I kindly ask which battery is fitted and its voltage and mAh characteristics. And where can I buy it. Thanks
@TinC33
2 жыл бұрын
It's one lipo battery so 3,7-4,2V about 2500mah i think, battery can be bougt on ebay, for microscope is link to banggood under video description.
@rosariaconilsorriso4314
2 жыл бұрын
@@TinC33 Very useful information. I recently bought the microscope from Aliexpress by mistake without a battery, and I still did not know its features. Thanks.
@TinC33
2 жыл бұрын
@@rosariaconilsorriso4314 i doubt you can just add a battery, there need to be battery manage system on pcb.
@rosariaconilsorriso4314
2 жыл бұрын
@@TinC33 The microscope is the same as the one you reviewed in the video. What I know is that the package bears the words "the battery is optional" and that in the pcb there is a connector for connecting to the battery. I hope so.
@RaquelDolores-qy4hh
Жыл бұрын
what store can i buy and how much the price and how many days can i receive this when im ordering now.
@TinC33
Жыл бұрын
There is a link into video description, to a banggood store, time depend by post
@kangtukang4948
4 жыл бұрын
can you share link where you buy pcb holder sir?
@MrRobbyvent
4 жыл бұрын
Hello can You tell anything about response time (lag)? Thank you.
@TinC33
4 жыл бұрын
Hy, sorry i forget to try that but it seems very fast, no problem for working at all.
@jacksonbriggs6486
3 жыл бұрын
Hello can you connect it to your Laptop with the cable send with?
@Oggies100
3 жыл бұрын
Yes, you can then use you laptop camera to take photos and videos. It is awesome value for money, I just got one.
@007xrico
3 жыл бұрын
Any suggestion on witch is the best microscope 7 inch lcd thank you in advance
@TinC33
3 жыл бұрын
Sorry i don't know, that one is one of cheapest 7" and it's good for use here and there like i use, but far from best quality.
I didn’t have so much luck with this piece of crap. Mine doesn’t want to record nor take any photo and ‘my friend’ claims my genuine sandisk cards are not good enough.
@TinC33
2 жыл бұрын
Did you try to format the sd card with a microscope, you may got wrong format of sd.
@mucky1957.
2 жыл бұрын
been looking for an LCD microscope and came across your video. Would I be able to use this with slides ?? I want a reasonably priced microscope to look at skin scrapes from my pond koi. I can see there is no way to lock a slide in place but would that be a problem. Does it only work via battery or is there a mains cable as well
@TinC33
2 жыл бұрын
There are two types with or without integrated battery, booth are supplied with micro usb.
@mucky1957.
2 жыл бұрын
@@TinC33 sorry..will the micro usb work instead of the battery. I assume it needs to be hooked up to a pc or lap top..
@TinC33
2 жыл бұрын
@@mucky1957. usb work like a power socket, you need a 5v usb charger (power supply) to plug on microscop for working or for charge the battery.
@YoungEli9
3 жыл бұрын
I just got my microscope , but the camera isn’t showing up when I turn it on , any suggestions
@TinC33
3 жыл бұрын
You can check in it if there some wires unpluv or something, otherwise contact seller for new one.
@fpvraver
2 жыл бұрын
Is there any difference between the battery version and the non-battery version do you have a recommendation? Or is it just price?
@TinC33
2 жыл бұрын
For users like me who use it only here and there battery is great thing a bit more expencive but simply turn on and work, without preparing ps. Check also my other video about andonstar microscope, it cost more but it's way better.
@fpvraver
2 жыл бұрын
@@TinC33 what’s the model number or title of your video?
@TinC33
2 жыл бұрын
@@fpvraver kzitem.info/news/bejne/2ZiP35xro2Nmn5w
@Arnipll
3 жыл бұрын
Hey can u send me pic How looks battery inside ? I get it on christmas present but without battery
@TinC33
3 жыл бұрын
Then it's without battery version, it's a singke sell lipo battery inside so 3,7-4,2V but check if you got free pins on circuit board to solder the battery cable on them. I'm not sure if this mod can be realised.
@gamez1
4 жыл бұрын
at 5:50 you say that the maximum zoom is 100x but since it's a comparaison with g600, can you remind what is the maximum zoom for the g600 please? thx
@TinC33
4 жыл бұрын
I don't remember, what was the maximum zoom on g600 but definitley less than here because of smaller lcd.
@gamez1
4 жыл бұрын
@@TinC33 you don't have it anymore, to do quickly the test? ^^
@TinC33
4 жыл бұрын
@@gamez1 i got them but mainboard is dead.
@gamez1
4 жыл бұрын
@@TinC33 dead? so quickly? so it is not a reliable device, is it?
@TinC33
4 жыл бұрын
@@gamez1 yes but my fail because i plug into QC3 usb charger, together with a photo battery charger, so it charge with 9 volt instedat of 5V, tottaly my fail.
@jaysond04
4 жыл бұрын
How is thr latency on this microscope?
@narcisogonzalezcalderon6074
4 жыл бұрын
Do you know what is the voltage of the battery? Thanks
@TinC33
4 жыл бұрын
Basic 1s (1cell) LiPo so somewhere between 3,4-4,2V, charged with 5v via usb.
@narcisogonzalezcalderon6074
4 жыл бұрын
@@TinC33 so a LiPo with 3.7V, like mobile phone's LiPo should be fine. Am I right?
@TinC33
4 жыл бұрын
@@narcisogonzalezcalderon6074 yes
@JackJack-hx4sj
4 жыл бұрын
Hey so I ordered a microscope about a month ago and when it arrived I realised that it was the version without the battery is it possible do you think to add the same battery that you have in your microscope to the other version I have?
@TinC33
4 жыл бұрын
Hm i don't know if the "non battery" circuit bord got bms (battery manegment system) so it cut off consumptuon when battery is to low and cut of charger when it's full. I think it's easier and more safe to usr some power bank and fix them behind.
@JackJack-hx4sj
4 жыл бұрын
Ok sounds like a good idea I have a 18650 battery which I can use as my rechargeable battery and I have a BMS board with it that should work and i can just 3d print a case for the back for it to stay in.
@TinC33
4 жыл бұрын
@@JackJack-hx4sj that's the best way, use bms and into housing install one micro usb for charging and one 10cm micro usb as output. 💪
@TinC33
4 жыл бұрын
But you'll need also booster so the output voltage will be 5v, buy some circuit for power bank (shoild cost few $) and you got everything you need, bms, booster, charger, discharge protection, battery capacity indicator...
@JackJack-hx4sj
4 жыл бұрын
What's the input volt and output volt of the battery built into the microscope
@23.kartikbhardwaj40
4 жыл бұрын
Well how is going there
@theboss1078
4 жыл бұрын
Background noise sounded like mobile phone interference
@izzzzzz6
2 жыл бұрын
Looking forward to getting mine. What has 1200x mag? An electron microscope? lol
@TinC33
2 жыл бұрын
Check also my other video about andonstar microscope, it's more expencive but much better.
@izzzzzz6
2 жыл бұрын
@@TinC33 it's too late, I bought it, unless I sell it locally. I only realised after that I could have got one that had better video and audio features. Next time when this one goes to the kids or something or if it fails.
@recommendedforyou157
3 жыл бұрын
can this be connected for live streaming purposes?
@TinC33
3 жыл бұрын
I think not
@michaellindborg1510
3 жыл бұрын
Yes it can! Connect via USB to PC and select camera mode. It now turns into a normal webcam.
@TinC33
3 жыл бұрын
@@michaellindborg1510 really, didn't try that, thanks for info.
@recommendedforyou157
Жыл бұрын
@@michaellindborg1510 hi sir will the unit still on if you connect it to PC and the battery is empty? because they share the same connection for PC and for power?
@Rockfire0
3 жыл бұрын
Hi, can u connect this to pc to see on monitor?
@TinC33
3 жыл бұрын
No
@michaellindborg1510
3 жыл бұрын
Yes! Connect via USB to PC and use in camera mode.
@LuisaCyrot
3 жыл бұрын
@@michaellindborg1510 please help me! I cant!! I mean, I do that but no happen nothing. Sorry for my english.
@rogerwood9379
3 жыл бұрын
@@LuisaCyrot Click on camera top right to chg to usb.
@BahtiyarAliALHAS
3 жыл бұрын
Can i connect this microscope to the computer ?
@TinC33
3 жыл бұрын
No that's imposible
@michaellindborg1510
3 жыл бұрын
Yes you can! Connect the USB to PC and use as a normal camera.
@lakmalgunathilaka6966
4 жыл бұрын
Hellow hidrolic video send
@thehitman5007
4 жыл бұрын
The only thing sucks is no MIC
@TinC33
4 жыл бұрын
True i miss it also, thaf mic for a few cents...
@mr2000jp
2 жыл бұрын
i bought it , and used it for a month , and i regret it , the image quality is very bad , it never gives good balance between light and dark areas , the light is refleced directly to the camera when working with cicuit boards or electronics repairs , cannot see the parts clearly and the colors is not clear too , cannot tell if there is some thing dicolored or burned , and after a month or so of usage , it died , it doesnt turn on , i opened it and tested the board , i found the circuit board to be shorting on the power area next to the charger port , and its poor design seems to have failed in short time because it generates lots of heat while it doesnt have and proper cooling , its one of the worst microscopes in the market and no matter what price you pay for it , doesnt worth it never buy this model , you will end up throwing it in trash
@sidgrover9428
2 жыл бұрын
I have had a similar experience. mine would not turn on either. on the day before it died I plugged it into my laptop and a message came onto the screen saying a USB device plugged into this pc is demanding more power than this port can give. I am not qualified to test the board, I wish I could, anyway i would need the microscope to view the SMD components on it, catch 22. I suspected that the battery was at fault so I removed it and now the microscope works again. I would be very interested to know which component you found shorted so I can have a look at that area and possibly replace that component with one of quality and maybe install a fan above it by printing some sort of holder on my 3D printer. The build quality of the microscope is rubbish. when i first got it the lens holder fell apart and i had to glue it permanently into the body of the unit.
@enchodus
3 жыл бұрын
junk product, photo size of supposedly 12 megapixels is no more than 800-900 kilobytes at highest settings, it is in fact no more than 2 megapixels at very best, junk!!!!!!
@dedskin1
3 жыл бұрын
i have a huge Telescope , computer operated runs on 12V and i plug it to 20V it explodes , but ive repaired it of course because it costs 2000$. Next time i plug it in on -20V so reversed voltage and again it explodes , and again i repair it , next time i burn up the Remote for it that also runs on 12V i plugged it to -12V , that i didnt repair for i dont need it any more made my own remote . And this guy blows up his microscope with 4V and buys another one for he cant repair for shit . Man , leave that resistor alone you gonn' brake something :) Amature ...
Пікірлер: 140