Hi I'm hoping to hear back soon since I'm in the middle of trying to replace my inner cv boot, but I dont understand the very first thing you did in the video where you smacked it and that cap came off. I have tried to do the same but no luck lol, just hoping you could explain it for me. Thanks!
@mhmdsam6203
4 жыл бұрын
Good job man ,thnx for the info ,can u tell me what type of grease do u usually use for it ?
@ristinemotorsports1966
2 ай бұрын
How do you do the outside cv with the 2 clips
@hectorcortes41
Жыл бұрын
When you rebuilt the outer joint is there an inner snap ring inside the outer joint?
@dicksandballsnshit3856
5 жыл бұрын
My MX-5 has developed a slight amount of play in the outer CV joint of my RH axle, If I jack up the rear end and spin the wheel back and forth by hand it makes a clicking noise. I can't imagine stripping it down and repacking the grease will fix this, is a whole new axle my only option?
@alexsaveragegarage7188
5 жыл бұрын
I would make sure it's not just gear lash that you're feeling
@dicksandballsnshit3856
5 жыл бұрын
@@alexsaveragegarage7188 There's plenty of play in the diff too, but specifically the right outer CV joint has a little play. But I looked further into it and the only way to rebuilt them properly involves oversized balls and grinding the races out etc etc (better to just get a new one).
@pro_g5738
4 жыл бұрын
Where do you it the rebuikd
@vilentv
4 жыл бұрын
If it's already making a clicking sound when you make turns is it still savagable?
@tpavz
4 жыл бұрын
Take the axles apart, clean and inspect for abnormal wear.
@vilentv
4 жыл бұрын
@@tpavz sweet thanks for the advice 😊
@Salvadin619
5 жыл бұрын
Any info on the part number for the cap that holds the grease in?
@alexsaveragegarage7188
5 жыл бұрын
Maybe a junk yard. Or maybe a engine freeze plug that's the same size. Try taking the cv to an auto parts store and see if they have something that'll fit
@troy_2395
4 жыл бұрын
@@alexsaveragegarage7188 so basically you changed the grease and boot?
@nathantiller889
5 жыл бұрын
How dah hell you get that little clip in on the hub side
@alexsaveragegarage7188
5 жыл бұрын
Just have to put the clip on and hit the axle with a hammer to get it to sit. Use a peace of wood so you don't damage it. It'll take some persuasion
@brians.1205
3 жыл бұрын
And how do you get the outer joint back on the axle shaft?
@1230Ohboy
5 жыл бұрын
What replacement boots did you use that are 16$?
@alexsaveragegarage7188
5 жыл бұрын
The cheapest boots on Rockauto
@1230Ohboy
5 жыл бұрын
The moog ones??
@alexsaveragegarage7188
5 жыл бұрын
Yes the moog for outer and beck for inner
@richardbedard1245
11 ай бұрын
The Miata is a rear wheel drive!
@idiotsgarage1668
4 жыл бұрын
I need a set of cv axles exactly like these. I have looked at a few other miata and they have a different style cv. What year miata are these from?
@ians1464
4 жыл бұрын
I got hubs and a arms from the scrap yard from what I thought was a 1990 Miata it had the other type of axles but I needed this kind and they both fit the splines looks like 90 to 97 it also looks like up 05 are a lot of interchangeable parts just Google what parts are interchangeable on line and you'll see a bunch
@ziyanali6392
2 жыл бұрын
@@ians1464 the 90-93 (1.6l model) used a different differential from the 94-97 (1.8l)
@overand
5 жыл бұрын
This was a bit unclear; all that I can tell is that you disassembled it, cleaned it, and then reassembled it & lubricated it. Without captions, description, or narration, I’m not sure if you replaced any parts. It *looks* like you examined all the bearings, but it’s still unclear.
@alexsaveragegarage7188
5 жыл бұрын
I know I'm working on getting a microphone to do explanation during the video
@pettybehavior5664
5 жыл бұрын
Alex's Average Garage excellent video
@sergiochacon5038
3 жыл бұрын
Hmmm lets put it in a balance a new cv axle is $65 life time warranty and to replace it is 40 min the most and ell the work to. Rebuild it ahhhh not for me is not a money maker jjjaa but is just me
@DDeGrasse
4 жыл бұрын
I dont think this is a third generation miata axle ... my acles sure as hell does not look like that. I think this is a CX-5 not mx5
@favourkalu6708
4 жыл бұрын
these are early NA miata axles. Late NA and NB axles changed to a one piece style.
@rennkafer13
2 жыл бұрын
'90-'93 use a 4 bolt inner CV, '94-'95 use a different 4 bolt inner CV to match the larger 1.8 differential, '96 up use a different inner CV style with a splined end.
Пікірлер: 34