Be careful to whatever track youre going to, they will throw you out without having a cage in your car. NHRA and IHRA rules say anything faster than 11.49 you have to have a cage installed in your car. And the faster you get, the more points and bars you have to add.
@konigwheels
10 ай бұрын
One of our favorite EG hatches in the community right now.
@kiraleaf
10 ай бұрын
So much time put in, so many mistakes learned from.. and he still keeps it simple :)
@Narleyned
10 ай бұрын
became one of the few channels I instantly like the video no matter what.
@BulliKid
10 ай бұрын
Approved!
@myPursesuitOfHappiness
10 ай бұрын
Frank looks great! Love my jet tag. TFS LY ❤
@DOUGHBOYSOUNDZ
10 ай бұрын
Hybrid shifter is amazing, I had a slight issue with a broken C clamp on mines after owning it for years, and they fixed it free of charge!🙌🏿
@ChopstikCharlie
10 ай бұрын
best automotive channel on YT.
@nickdonohue7081
10 ай бұрын
Hybrid racing B series shifter R-fab shifter plate Dynodesigns tyrannosaur tightener Hybrid detent springs Absolutely love this setup as long as you have stiffish mounts it’s a solid setup! Love the content!
@Escalofrios29
10 ай бұрын
Is that the one that gets rid of the 2nd shift linkage arm?
@nickdonohue7081
10 ай бұрын
@@Escalofrios29 yea the rfab plate bolts to chassis and shifter bolts to plate removing the stabilizer arm from the setup
@Escalofrios29
10 ай бұрын
@@nickdonohue7081 what's the benefit from this?
@Thatslow_B6
10 ай бұрын
I think you should redo the body and paint it that would be the icing on the cake for that car!
@AndreaDoesYoga
10 ай бұрын
Incredible build, your Honda Civic is a beast! 🚗💨
@advantagehiphop
10 ай бұрын
Holy guacamole 5 years already? Keep er up man!
@colegivens9513
10 ай бұрын
I have the same shifter and I love it. I don’t have the problems that you’re having.
@jamesa.3257
10 ай бұрын
Hybrid racing short shifter and new detent springs will make a world of difference, have it on my eg and it's amazing!
@williamrose3191
10 ай бұрын
copper spray headgasket arp headstuds e85 ready for boost!
@peterfrench8635
10 ай бұрын
Pete from OZ 🇦🇺 , I got a turbo kit from the US from Go Auto Works , so happy with it. My car is so much like yours , I run Garrett GTX 3071 R , 401 kws 450 nm on 20 pounds on 🌽 , keep up the video's , live the dream. 🦘
@robm2630
10 ай бұрын
Puts a big smile on my face when I see a new boosted John video uploaded 😊. Keep up the great content!!
@EthanFox
10 ай бұрын
Get the jackspania racing b series box shifter it has options for lockout for reverse and 5th as well as 1st and 2nd so you can’t misshift as well as mounting to trans tunnel so you don’t need a stabilizer bar for shift linkage feels amazing
@Jakethysnake93
10 ай бұрын
This thing would be insane at the track all wheel drive
@boosted_john
10 ай бұрын
Haha yes it certainly would be
@trippieacid6251
10 ай бұрын
Just got my the OG shirts today fucking love it. The print looks way better in person. Thank you so much.
@boosted_john
10 ай бұрын
That’s awesome! Would you mind sending me a picture of it? +1 (317) 764-0615
@acevedohiram
10 ай бұрын
She's looking awesome dude!! Maybe an engine bay clean next?
@boosted_john
10 ай бұрын
Would not be a bad idea, but I think I’ll save that for when I get a new shell and make it crazy clean haha.
@acevedohiram
10 ай бұрын
@@boosted_john show car and a fast car, fair enough!!💪🏽
@tegnando2697
10 ай бұрын
Gnarly build 🤙🏼💯
@Teriyakiboy726
8 ай бұрын
New subscriber, love the content so far!!! You have definitely helped me with my turbo LS Vtec build in my EK hatch!!! Thank you for everything you are doing and providing!!! Keep it up!!!!
@boosted_john
8 ай бұрын
Welcome to the channel!
@civicmasta
10 ай бұрын
the speedfactory detent springs will work wonders for your shifters drag/slop
@shane3350
10 ай бұрын
I have the same steering wheel with an nrg quick release. It spaces it from the light stalks pretty much exactly like the oem steering wheel.
@deieznuts
10 ай бұрын
Some detent springs in the transmission should help make the shifter feel more notchy
@andynunez2026
9 ай бұрын
Jackspania, irp, 1320, bullboost shifter
@clne36
10 ай бұрын
Awesome build wish I had that motor
@mattdeverall3138
10 ай бұрын
Thanks for the build update, John. Question for you: what type of boost controller are you running?
@boosted_john
10 ай бұрын
3 port mac solenoid
@SIRICKO
10 ай бұрын
People really need to understand what A breather tank and a catch can do!!!!!!
@elijahfield4643
10 ай бұрын
John! Sick video! Keep uo the great work, content keeps getting better and better! The only question i have is, what clutch setup are you running?
@boosted_john
10 ай бұрын
Oh didn’t even think about that. Clutchmasters fx500 4 puck sprung. It’s nice and comfortable to drive, but I worry that it won’t hold the power long term. Time will tell.
@massimandujano7818
10 ай бұрын
Very nice machine man 👌🇯🇵
@man.and.machines
10 ай бұрын
Please put some header wrap on that wastegate dumptube 😩 hot air intake asf 🥲
@deieznuts
10 ай бұрын
Next time you have the engine out.. you should spray that bay..
@sirzoepro
10 ай бұрын
Check the shifter collar.
@Ginsengx
10 ай бұрын
Idk what your using for shift bushings underneath but i started using only solid aluminum front and rear instead of the poly ones and its way better.
@boosted_john
10 ай бұрын
I’ll have to try that out!
@crystalzues4712
7 ай бұрын
I think the battery needs a mention as nobody knows how good of a mod a lithium battery is.
@austinnoble
10 ай бұрын
Rust repair on the fenders anytime soon?
@Jayy15m
10 ай бұрын
Should make a transmission rebuild video!! Step by step!!
@boosted_john
10 ай бұрын
Dang. I’m not qualified to do that. But I know someone who is. I’ll make that video someday when I’m building an awd trans.
@jasonh3220
10 ай бұрын
New sub here love the content
@martinaguilar7066
10 ай бұрын
Yo John you babe a little plastic ring inside the shifter if it is worn out it won’t center the shifter when you get out of gear, I have the same shifter replace that plastic ring and you should be good.
@martinaguilar7066
10 ай бұрын
Have *
@mohamedsyafiq878
10 ай бұрын
please keep that ek coupe... 😆✌️
@seanwilliams5403
10 ай бұрын
Great build, know u have been through a lot with this. What type of ecu?
@boosted_john
10 ай бұрын
I totally forgot about the ecu. It’s a p75 with hondata s300, vtec, and bbg soldered in.
@johnnybrock4901
8 ай бұрын
I like your videos but from Chicago you are so fucking suburban in your voice hahaha it's killing me! 🤣
@J0SHU4N0LL
10 ай бұрын
Eff yea
@monsterdong7520
10 ай бұрын
This is so close to exactly what I just built lol
@kentuckyfried3850
10 ай бұрын
A lot heat wrapped around the turbo and intake….
@sbus6766
2 ай бұрын
Hey what the ar for ya turbo .63 .82
@ronaldgallihugh9456
10 ай бұрын
Dude thay spray race motors with copper spray
@joemaggio6806
10 ай бұрын
Always piece together your turbo setup. The kits are trash on eBay
@SRTSkittle
10 ай бұрын
Hasport Linkage, Billet shifter bushings, Speedfactory Detent springs, and a Hybrid Racing V2 shifter. Thank me later
@boosted_john
10 ай бұрын
I’ve heard good things about those hybrid shifters.
@teddy_awdB19
9 ай бұрын
Looks like s300v3 for engine management?
@boosted_john
9 ай бұрын
Yep. Forgot to mention.
@chaotic4182
10 ай бұрын
Are you going to sell that skunk2 catback?
@boosted_john
10 ай бұрын
Not planning on it
@boostismagic
4 ай бұрын
14:45 Why do you have a wastegate spring in your blow off valve? 🤭
@boosted_john
4 ай бұрын
The tial bov uses a spring similar to the wastegate springs.
@boostismagic
4 ай бұрын
@@boosted_john you called it a blow off valve…I was gettin in a little dig 👊 Still buddies
@imacracker515
10 ай бұрын
Im confused about what peoples problem is with the breather setup. What exactly do they think is the problem?
@boosted_john
10 ай бұрын
People get mad that it drains back
@imacracker515
10 ай бұрын
And what do they say is wrong with draining back?@@boosted_john
@bra618
10 ай бұрын
what clutch are you running?
@boosted_john
10 ай бұрын
Clutchmasters fx500 4 puck sprung disc
@bra618
10 ай бұрын
what happened to that XTD ebay clutch?@@boosted_john
@boosted_john
10 ай бұрын
@@bra618 it shit the bed after like 2 weeks
@baloghbotond4250
8 ай бұрын
Not to hate, but as an EG owner, that brake paddle is MORE than illegal in the EU.....for very obvious reasons.
@boosted_john
8 ай бұрын
Good thing I don’t live in the EU PU
@MiguelMezaFit
10 ай бұрын
Where are the 8th gen vids??????
@boosted_john
10 ай бұрын
Bro 8th gen gonna get some love one of these days. Just not rn.
@vthoj
10 ай бұрын
what tire size are you running on those Ultragrams?
@boosted_john
10 ай бұрын
225/45zr15 Falken rt660
@landentanner6561
10 ай бұрын
hey john is their a way i can contact you and ask you some questions. i’ve got a stock block and going lsv and need a little help
@boosted_john
10 ай бұрын
Someone didn’t make it to the end of the video
@landentanner6561
8 ай бұрын
@@boosted_johnyou replied once and then didn’t reply after that😂
@bendobson9165
10 ай бұрын
Is the turbo water cooled or just oil?
@boosted_john
10 ай бұрын
Oil
@victorwilks88
10 ай бұрын
Steering mud lol
@naughtydog8579
10 ай бұрын
I think the drainback issue comes from people that live in cold climates and dont have their tubes routed good to prevent condensation, and winter brings them the water/oil nasty shit in their reservoirs.. so they think that going back would be bad.. probably would. lol
@ScorpioXXXL
10 ай бұрын
My shifter set up in my EG is a Hybrid Racing Shifter, extender & GSR shift knob. I also have poly bushings, & an no name upgraded U joint. Its shifts very well & always return to center. Ive been through a couple set ups but my absolute favorite was a OEM shift linkage, Circuit Hero Extender & Mugen style shift knob. I can power shift that all day long. Unfortunately it snaps the shifters at its weak point every year or 2.
Пікірлер: 96