BTCC Racing needed a specialist to organize their stuff, well they have found the best person for this job. I think nobody can do it better than you.
@ShadowFoam
3 ай бұрын
That’s very kind mate, I was just chuffed to get the call! 👍
@mos8541
3 ай бұрын
WOW! Hey Rugby you in the big leagues now! oh and thanks for wishing us a Happy Independence day, we're doing smashingly over here in the colonies ... Brilliant!
@ShadowFoam
3 ай бұрын
Thank you ❤️☺️
@douglasmiles1215
3 ай бұрын
You never cease to amaze with the projects you take on. The amount of technique and experience it takes to come up with the setup for those 4 fixtures in the deep drawer and the short amount of time you did it, wow.
@nickthorpe5990
3 ай бұрын
Great episode, would love to see more workshops or van set ups.
@ShadowFoam
3 ай бұрын
Thanks Nick, I’ve got some ideas for this in the pipeline! 👍
@---l---
2 ай бұрын
Absolutely. Would be great to see more like this.
@markduggan3451
3 ай бұрын
That must have been awesome to be around so many amazing cars and to work out all those layouts. Well done to all the winners of the giveaway.
@IAAITKEN
3 ай бұрын
That’s a fair job! Not sure what I’m more jealous of, the tool boxes you cut or the number of tools they have! Keep up the good work, you make it look so effortless!
@malibugrove
3 ай бұрын
I hope the Exceler8 Motorsport guys say ‘Make the Noise’ Project Binky style whenever they use the digital level as they prep each race car. Love the fact you included a safe place to store wheel nuts to stop them rolling away.
@darrenrobson2486
2 ай бұрын
So much work but the end results *chefs kiss!
@ShadowFoam
2 ай бұрын
Very kind Darren, I appreciate that!
@krislyness3328
Ай бұрын
Love btcc, grew up through the mondeo / v70 era classic racing now
@seanwelding4183
2 ай бұрын
Please do more of these. Tons of great ideas and super interesting to watch.
@craigjollands9802
2 ай бұрын
I'm definitely ordering some shadowfoam after watching this it makes them toolchests look so much better and easier to work out of
@rbos6285
3 ай бұрын
Love your content and each show is so different, as a multitrade carpenter I have so many tools and don't know where to start it would be great to see a show on different building trades ...... keep up the good work
@hawkism
2 ай бұрын
I deffo need some of this foam stuff as cot a few socket sets with broken cases..... this stuff would be perfect 👌
@andyfirth5931
2 ай бұрын
Love the blue shadowfoam, looks great.
@truebluetravellers
3 ай бұрын
The hot foam finisher 👌👌👍 love it
@MrTonyhague
3 ай бұрын
This is the first video I've watched showing the cutting of the foam, I'm surprised how easy it looks to get great results
@RavenV2984
2 ай бұрын
I have a hobby tabletop drawer system and old style hanging rack, Will almost certainly be looking into the shadow foam, Just looks tidy
@johnrevell6684
3 ай бұрын
That was really cool working in the race workshop, what a privilege
@ShadowFoam
3 ай бұрын
What a privilege indeed!
@hotdavesweet
3 ай бұрын
"Aces in its places" That's why Jon always does such a great job. 👏
@ShadowFoam
3 ай бұрын
Haha thanks mate appreciate your comment!
@mandosdad5436
3 ай бұрын
again another reason why your videos are the 1st thing i look at on a saturday morning when i finish work great stuff as always
@VictorAugusto86865
2 ай бұрын
Get a better life 😂
@paulbudford
3 ай бұрын
Nice job. It was a challenge. But you smashed it. 👍
@rustyenigma28
3 ай бұрын
John, that's one hell of a work. Good job mate, besides! never heard of a Drapper tools, looks dope.
@PhilipWillsWorld
2 ай бұрын
Thanks for the video.
@craigtuck1741
3 ай бұрын
those tool drawers looked amazing, theres something about organized tools in foam that look cool. great video mate
@ShadowFoam
3 ай бұрын
Really scratches an itch h doesn’t it? Seeing everything organised and in place
@craigtuck1741
3 ай бұрын
@@ShadowFoam it really does, it just looks professional and its easy to find tools and see if any are missing. really love the videos and the quirky tool videos as well. as a carpenter in NZ having you highlight these tools and foam insterts is showing me whats out there in the world thank you
@timk1980
3 ай бұрын
These vids always mix my ocd of shiny tools and a pretty draw setup ! Love it
@leerampton4443
3 ай бұрын
You make it look so easy Jonathan, I'm definitely going to order some shadowfoam to organise my garage drawers.
@ShadowFoam
3 ай бұрын
Go for it! And let me know how you get on!
@philipdouthwaite4477
2 ай бұрын
I use shadow foam for my track day car so I'd love to see more workshop videos
@senabob
2 ай бұрын
What a job looks wicked wish my tool chest was as organised as them 😂
@stephenbatterbee2065
3 ай бұрын
Very impressive set up. It also goes to show what goes into the support for these racing teams. Liked the battery storage clips too I will look into them.
@neil_bird
3 ай бұрын
No beer o’clock for me last night - so it’s toast and jam morning with the latest from Shadowfoam - now this upload ticks my box - love motorsport !!
@neil_bird
3 ай бұрын
Mammoth Job Jonathan - nice job !!!
@Christophergriffiths1972
3 ай бұрын
After ordering your starter kit and only completing 4 draws in my tool chest, and now watching you do all these draws it makes you appreciate how long it takes to work out where everything is going to go. I have to say though I’m pretty impressed with how everything looks now in my van and will definitely be buying some more to finish my bottom box off! Great product and thanks 👍🏼
@ShadowFoam
3 ай бұрын
Hi Christopher, very happy to hear that! Have you got any pictures of your setup?
@Christophergriffiths1972
3 ай бұрын
Yeah I have. I’ll send them to you.
@sheldimus9811
3 ай бұрын
Nice to see Eyeball Paul found work after producing Big Girl, Big Girl!
@BruceAllgire
3 ай бұрын
I love this layout and video. I love this layout and video. I love this layout and video. I love this layout and video. Oh wait - I didn't need to say that four times. 🤪. Thanks Jonathan!
@ginge7744
3 ай бұрын
Really interesting build, thank you. What a great selection of tools.
@amitvaya5066
3 ай бұрын
Very cool, was that the biggest challenge you faced, so many tools in a short period of time.
@dinotuber955
3 ай бұрын
Wow that was impressive to do in 2 days. Im amazed that I won, thank you look for to receiving the give away items.
@ShadowFoam
3 ай бұрын
Congratulations mate, drop my team an email at m.wood@shadowfoam.com and we’ll get shipping arranged for you! 👍
@shaunmorrissey7313
3 ай бұрын
That was a bit of an epic episode.
@fredjacques2979
3 ай бұрын
Another fantastic set up. Brilliant effort. Looking forward to starting my wee set up soon. Need to gain a bit of strength first, but thankfully getting there. Your video's have helped keep me sane during a difficult time. Thank you
@ShadowFoam
3 ай бұрын
Hi Fred, that’s very kind to say! Let me know how you get on with your project when you get it done, no rush! 👍
@grahamsichel3895
3 ай бұрын
Now that was a very cool video. It just shows how versatile Shadowfoam can be when creativity is applied 👍
@ShadowFoam
3 ай бұрын
Glad you enjoyed it Graham, what was your favourite part of this video?
@wyattskelton5481
3 ай бұрын
One day it’s gonna happen 😂 Oh and the hot air gun to finish is a neat touch.
@hnnhgaming
3 ай бұрын
Incredible job you've done there, all the drawers look mint !
@pauldowie1399
2 ай бұрын
Wow what a job, that looked brilliant. I wish my workshop was that organised hehehe. I loved the battery mounts, hadn't seen those before, followed your link and ordered some up straight away.
@HomesteadingUncontained
2 ай бұрын
Just ordered our first Shadow Foam products for our Makita boxes - can't wait to get on with organising the messed up tool cases. Cheers from France 🇫🇷
@chrispcream1
3 ай бұрын
awesome video that was 1 hell of a lot of tools to shadow foam , but you nailed it 👍
@007bondport
3 ай бұрын
Now that’s a task , excellent work Jonathan, looks great
@benaston007
2 ай бұрын
Reminding me of the time I did all mine in one go!
@ukskid
2 ай бұрын
awesome work it's always difficult keeping race boxes tidy easy to grab items.
@ShadowFoam
2 ай бұрын
Absolutely, that was why it was sch a joy to help out!
@Vikingwithtools
3 ай бұрын
good work. I could have sat and watched you work for hours, but unfortunately I have to work too😂 👍
@watchcommander2012
3 ай бұрын
Great video of two favourites firstly tools followed by BTCC Racing. The different setups and tools really showed the diversity of use for the shadow foam
@ShadowFoam
3 ай бұрын
Couldn’t agree more mate! 👍
@PeterOConnl
3 ай бұрын
Love seeing your success, Jona! Onwards and upwards!
@ShadowFoam
3 ай бұрын
Thanks mate, just keeping my head down and working 👍
@stes6661
3 ай бұрын
Love your foam, I need to practice more to get it looking as good as yours do lol bet it was so good looking around there
@ShadowFoam
3 ай бұрын
I enjoyed looking around definitely, like a child’s playground full of boys toys!
@tommyfisher1435
3 ай бұрын
Awesome, absolutely love the layout. Everything in its place, perfect!
@ShadowFoam
3 ай бұрын
Thanks Tommy, glad you enjoyed it! 👍
@johnweir2460
2 ай бұрын
Really interesting to see the kit the race teams use to keep the cars in peak performance,
@ShadowFoam
2 ай бұрын
It is an awesome tool kit! 👍
@chrisomahony7166
3 ай бұрын
I think you're going to end up with more work, once the other teams see those tool chests rolling around down pit lane. Nice job!
@ShadowFoam
3 ай бұрын
I hope so! I really enjoyed doing my part for excelr8
@stevestanziano2438
3 ай бұрын
Very nice setup! It is great to see the different ways people layout their tools based on the type of job and industry they are in.
@ShadowFoam
3 ай бұрын
Couldn't agree more! Should I do more workshop transformations?
@stevestanziano2438
3 ай бұрын
@@ShadowFoam I work in the bicycle industry as a mechanic. My travel box is a Pelican 1560 and it needs some ideas on foam and layouts as we have a wide range of tools we use.
@842chuck
2 ай бұрын
Really good video, fascinating to watch this.
@JackyGoodrum
3 ай бұрын
Loved seeing how all the tools are organised for the team, so much more than I thought they’d need!
@ShadowFoam
3 ай бұрын
I agree! And I didn’t even finish them all, so so many tools!
@gabriellombardi1453
3 ай бұрын
I love what you do and how you explain everything 👌well done brother
@andyfadian
3 ай бұрын
Loved this one, gutted I didn’t win, but I’ll keep trying lol. Keep up the great videos 👏👏
@tilkka_
3 ай бұрын
Awesome giveaway! And great show off with socket drawers!!!
@joelmartin2549
3 ай бұрын
Those big wipes look pretty neat!
@ShadowFoam
3 ай бұрын
Highly recommend them! 👍
@Matt938-l2s
3 ай бұрын
That was soooo many tools, well done 🎉
@ShadowFoam
3 ай бұрын
Thanks mate, I don’t think I’ve ever done as many tools in such a short period of time
@OmarKhanUK
3 ай бұрын
Already got those big wipes in my Amazon cart. nice!
@passiton3801
3 ай бұрын
What makes the difference with these projects is the layout. Its gotta b functional easy to use an pleasing to the eye. That's the real skill, then the cutting out becomes the easy part.
@johnvickers1981
3 ай бұрын
You done a great job on all those tools
@ShadowFoam
3 ай бұрын
Thanks John, appreciate that mate! 👍
@klo1679
2 ай бұрын
I personally hate foam inserts. I’m a field technician with limited space to store my tools and have the tools to work on a massive variety of machinery. So my tools get sorted broadly and thrown into drawers to minimise the amount of wasted space. This comes at the cost of taking a little bit longer to find the correct tools and I do spend a small amount of time digging around drawers like my spanners drawer to find what I need. I had foam inserts in my first toolbox, and they worked when I had a limited collection of tools and had more drawers to work with. But as I expanded and needed more specialized and more generalised tooling I found that loose sorting and letting them find their place to maximise space was better. Being a field tech means my tools are on a vehicle and are bouncing around so there’s no way of keeping shit sorted by just setting them down in a drawer. Dividers welded into the drawers to let me loose sort tools.
@james737800
2 ай бұрын
Be great to see you do some aviation tool boxs
@EUCvibes
3 ай бұрын
You’re so driven it’s amazing to watch ‘
@ShadowFoam
3 ай бұрын
I like to keep challenging myself! Thanks for watching mate! 👍
@timothystevenhoward
3 ай бұрын
Really cool video! Thanks for all the tips!
@ShadowFoam
3 ай бұрын
Glad it was helpful! Is there anything else you’d like to know?
@stephens2322
2 ай бұрын
Ridiculously nice work 🎉
@ShadowFoam
2 ай бұрын
Very kind Stephen, I appreciate the words mate 👍
@m.t.v.7934
3 ай бұрын
Very nice setup. The foam just makes the tools pop and it’s not just for looks though, you can tell immediately if something is missing. Fantastic project and fantastic project in Shadow Foam
@ShadowFoam
3 ай бұрын
Very true! What was your favourite part of the project mate?
@m.t.v.7934
3 ай бұрын
@@ShadowFoam I like what you did with the wrenches and the hex sockets. Just looks so freaking nice in foam. :)
@ivraalia
3 ай бұрын
That’s awesome!
@ianfeltham4771
3 ай бұрын
Bet you enjoyed that, looks awesome
@ShadowFoam
3 ай бұрын
It was a great couple of days out! The cars were awesome and the entire team at excelr8 were so welcoming! 👍
@waynebarrow2356
3 ай бұрын
Shadow foam this is brilliant just found your channel and and we'll think your uploads are cool
@ShadowFoam
3 ай бұрын
Welcome aboard! New uploads every Friday!
@HomeGrownCreationsLTD
3 ай бұрын
KEEP UP THE GOOD WORK
@waelelias1790
Ай бұрын
I am in need of another setup video I need it badly!!
@gary2632
3 ай бұрын
Awesome - really enjoyed that 👏👏👏
@daleleatherbarrow6354
3 ай бұрын
fantastic job
@turnbull321
3 ай бұрын
Amazing job
@rambo196919
3 ай бұрын
Iv'e used Draper stuff in the past, 50/50 on quality tbh.
@mattsimms1062
3 ай бұрын
Hi Jonathan I love your videos as I love collecting tools and stuff Down my allotment I use wolf garten garden tools which is different attachments that fit on a pole I've been thinking about making a shadow foam wall to store them all in
@ShadowFoam
3 ай бұрын
That sounds like a great idea, let me know how you get on with it if you decide to do it!
@chrishoward6774
3 ай бұрын
Surely you negotiated to get the Shadowfoam logo on their cars as part of the deal? Great video as always.
@peterclarke3300
3 ай бұрын
Very impressive work and nice and clean 👍👍
@ShadowFoam
3 ай бұрын
Thanks Peter, was there a drawer that stood out to you?
@peterclarke3300
3 ай бұрын
@@ShadowFoam it was the deep with the four wheel things in that looked a award one 👍
@belton2006
2 ай бұрын
Love this ! So much hard work
@horaz86nope24
3 ай бұрын
Wow, when I think about how tiring I found 9 inserts. This is insane, and it looks so good
@ShadowFoam
3 ай бұрын
I appreciate that mate, I was shattered by the end! How did your inserts do?
@horaz86nope24
3 ай бұрын
@@ShadowFoam Im happy with them, already send some pictures to one of you :D. Only the flattening at the bottom is still a bit rough
@TAPA214
3 ай бұрын
TOOOLSS ARE AWESOME
@michaelwillson6847
3 ай бұрын
What a video Jonathan looks like an amazing place serious amount foam. Would love to see you do maybe f1 garage?? 😲🤔🏴👍
@ShadowFoam
3 ай бұрын
Maybe one day!
@DJ-SPARKY-REACH-ON-AIR
3 ай бұрын
vary nice setup but i would do different colours of foam for each tool set and then you can fined them easy keep up the good videos
@ShadowFoam
3 ай бұрын
Not a bad idea at all! 👍
@andrewwalker9020
3 ай бұрын
Newby to the channel. Great videos . Loving the American shopping
@ShadowFoam
3 ай бұрын
Welcome to the channel Andrew, I’ll be going back to America very soon!
@tomrowbotham1365
2 ай бұрын
These look sweet.
@GizmoKid
3 ай бұрын
Great video. When doing the replicated cutouts, is there a quick way you have to copy the layout from one toolbox to the next? If it is multiple layers then I assume you just use the top layer as a template, but if it is only a single layer what then? Love the energy and enthusiasm you brought to this.
@xyzspec82
2 ай бұрын
Have you ever tried to use a CNC to cut the foams? For big projects with several copies of the same model, it can be a good option.
@kurtandrews7450
3 ай бұрын
Impressive as usual.
@ShadowFoam
3 ай бұрын
Thank you! Cheers!
@Flauscheloni
3 ай бұрын
Looks amazing all filled up. By the way have you ever considered reverse coloring? Color on top, black in the cutout?
@darkfable1468
2 ай бұрын
My OCD loves you so much, its all so pretty
@EUCvibes
3 ай бұрын
We need more b roll of all the finished drawers 🙏🙏🙏
@ShadowFoam
3 ай бұрын
Check us out on instagram, I’ve posted more pictures to coincide with this video going out!
@gabriellombardi1453
3 ай бұрын
I would like to have my own cobalt drill but i would still have to look for them.
@Driftkart
2 ай бұрын
would love to see a vid using a Shaper Trace drawing toolkit to copy a tools shape for cnc
@wyrdlg
2 ай бұрын
That was very nice. Any way to lable the cut outs? And what was the drill for you were using? Cool trick with the heat gun!
@oOKidKeyOo
3 ай бұрын
That was an amazing job! I'm really hooked to your videos, it kicks my ocd xD. Hope someday i will win, but regardless, i want to say thank you for your Videos!!
@ShadowFoam
3 ай бұрын
Hi mate, thanks for the kind words, I appreciate it, I’m glad you videos can scratch that itch for you!
Пікірлер: 225