This episode continues with the creation of the water supply pump body.
The silver soldering body has a complex shape, but does not interfere with the fixation.
Major machining is done on a lathe.
Valve seat performs sheeting.
The entire circumference of the hole should be very thin and unbroken.
Therefore, it seems that just a very weak tap is sufficient.
If you make a test piece and practice, you will know how much force to use.
The performance of the pump was not checked at this time.
平岡 幸三:生きた蒸気機関車を作ろう, ISBN4-905659-03-5, 機芸出版社, 1993
#LiveSteam #Pennsylvania_A3_Switcher
Негізгі бет My first project of live steam. §20. Water pump Part 4
Пікірлер: 2