Yeah Have you tried Polish on your car or wax ceramic nano which is better? Thanks
@kaisercontrolsyou3636
7 күн бұрын
@@grupposoleblufranto7971 they are diffrent things the ceramic coat is like wearing gloves for your paint and polish gets the paint level so removing scratches etc
@grupposoleblufranto7971
7 күн бұрын
Thanks for your clarification @@kaisercontrolsyou3636
@CL4SSiCS
3 күн бұрын
@grupposoleblufranto7971 you only use ceramic coating after polishing. It is a semi permanent option so it will leave the paint looking bad
@williammorrison6328
4 күн бұрын
Lots of respect to you for taking on this project. Don't listen to the haters. Plenty of videos on wet sanding and buffing to hone it in. Also, take a look at Autobody for a career option. I've been in it for many years now and wake up every morning excited to get to work.
@DrivenForFun
4 күн бұрын
Thank you 🙏 😇
@benjaminbuljevic7977
3 күн бұрын
@@DrivenForFun yes, wet sand and polish to get a perfect result. its worth the effort!
@connorbean4837
3 күн бұрын
For a first attempt thats an awesome result, Not many people get it that good on a first attempt, especially on an entire car. Nice work and props to you for giving it a go! Look forward to more videos.
@alexandervu1976
Ай бұрын
Love how it came out, especially for your first time! 🔥🔥🔥
@sergiorodriguez7955
15 күн бұрын
Dont give up. Always enjoy any project with your dad. My dad and I had so many projects
@MrThestevster
19 күн бұрын
Things to fix for the next time: -Dust free environment -Blending the paint from panel to panel -Sand ALL of the scratches out before you paint anything -Don't finish with an orbital sander, finish by hand with a block -always hand sand "side to side", NEVER "forward and backward" (This avoids making finger-sized/spaced sanding grooves) -Maybe back away slightly when you spray -Don't spray panels separately if you are doing metal flake/pearl/candy/etc... (the product will lay down differently from panel to panel) -Yes, hold the gun perfectly perpendicular to your surface
@tomkato6400
17 күн бұрын
Great job. Looks 100 times better. I painted a car for the first time back in college. Full of orange peel and other imperfections, but I learned a lot from the experience.
@garrysofjan3798
20 күн бұрын
Looks better than my paint job. With wet sand and polish it will turn much better.
@creamsdestinedfuture
3 күн бұрын
does look a lot better, give her a quick buff with a wool pad and yeah, you learnt alot.. do a test run always before spraying on tha car doe❤
@SteveStevenson-tg2mb
17 күн бұрын
1.Put sheets of toilet paper over ya mask filter, keeps em goin longer! 2. Orange peel is usually low pressure related, if its peely straight from the get go, turn your pressure up, like 35 psi+, if its ok then goes peely, your compressor is probably losing pressure, so youll need to slow down. 3. If it aint right, paint it white! 😂
@aidanzuber4026
7 күн бұрын
Shocked to see you don’t have hundreds of thousands of views, got a new sub. Your content quality is immaculate, stay consistent and you will certainly see success.
@dostuffchannel
17 күн бұрын
First car I painted was my 78' BMW. Did it in two stage paint. I used quality components and I had many runs and orange peel, but after wet sanding and polishing it was amazing! In my opinion single stage is much harder to paint than two stage. Good job and great attitude.
@gman9035
17 күн бұрын
Looks a lot better and you did it. Take pride in it.
@da-mazing8500
19 күн бұрын
Well done! Like you say it's all a learning process. It's only paint too. You can always sand down and reapply
@hitbyGROSJEAN
14 күн бұрын
You can always wet sand and polish/compound if you’re not happy with certain imperfections!
@thetriggerman954
18 күн бұрын
Be sure to tune into The Triggerman before you attempt your next paint job. Lots of single stage tips. Good job man 👏🏼👏🏼
@alaniple
Ай бұрын
i'm not really into car painting, but it looked pretty interesting and the paint itself looked good! 👍
@nickfinley7162
10 сағат бұрын
not to bad for ya first time next time maybe try to get a bigger air compressor so you have a consent air flow and just doing some test panels to get a good feel for the gun and get the settings set up best
@caffeine_carl
14 күн бұрын
Good Job! I did my first at home paint job last year, and it turned out pretty similar. I ended up doing a cut and buff, and it worked wonders, highly recommend
@Allussion
9 күн бұрын
not even 100 subs? this content is so good bro. just subbed
@djngo7693
8 күн бұрын
Key to spraying single stage is to turn down the material on the gun. Its tricky to spray as a first timer because its easy to run it. Youre tiger striping besause of a combination of the amount of material coming out of the nozzle and inconsistant overlap technique and fan pattern
@jundialhaqiqa9907
17 күн бұрын
Big improvement
@taft929
Ай бұрын
this shit tuff asf foenem 🔥🔥🔥🔥
@UnderTheBridgeLiving
14 күн бұрын
Wtf is foenem? 😂🤣
@izzacdagoon
10 күн бұрын
Paint my celica for me yeah 😂
@tonyp992
17 күн бұрын
That’s pretty good , great project
@Syr51
4 сағат бұрын
Not bad man❤️🔥
@staygolden84
3 күн бұрын
open the fan up on spraygun turn the psi up more too, move faster also walk the length of the car, also theres something called control coat to avoid the tiger stripes on the hood and roof
@MatthewSimm
14 күн бұрын
Awesome work mate!
@darrenhamada7698
17 күн бұрын
Looks pretty good. I just had my truck painted for 5300 which is a 98 tacoma
@nicktoddla5720
5 күн бұрын
It really needs wet sanding and compounding
@flaggov6949
3 күн бұрын
I hope that's the second video in the series.
@abrahammelendez-ne2wy
6 күн бұрын
Keep it going🔥🔥a really good content
@emmanuelbudica3045
18 күн бұрын
Great job
@3010diesel
9 күн бұрын
I am your 100 th subscriber from sweden😊
@jaimeayala6659
7 күн бұрын
Nice 👍🏽👌🏽 Great Job
@chomapa
19 күн бұрын
with some clear coat wet sand and cut in buff it would eliminate alot of the orange peel and look really nice
@goodforrostami9481
9 күн бұрын
I Love it 😍 😍 😍 😍 😍 😍
@artimus0112
5 күн бұрын
imma say you picked pretty hard color to begin with you should either get a white or a black to start with but considering the laws over colour change, i guess you cant help with that... still you can reduce those runs using buff and polish
@FinnClark445
7 күн бұрын
Nice ducks hehehe
@Grant7
17 күн бұрын
Not bad for your first job.
@melvinthemechanic
9 күн бұрын
Never wet down a car with body filler. It sucks it all up and the panel will rust
Пікірлер: 57