The trailer connection is called a "fifth wheel". Motor capacity is a V12 diesel rated at 1,399.05 horsepower.
@antman5474
3 жыл бұрын
It's modelled off an Man1400 hill climb racing truck with 1400 bhp and 5800 nm of torque. Here's the best part, Man also do a 2000 which has a displacement of 24 litres. These engines are usually found in motor boats. Hope that answers your question.
@_Dave_S
3 жыл бұрын
That thing on the back of the truck is called a fifth-wheel coupler or hitch. While I personally am not into those, it is a very cool and detailed truck.
@thatslotcarguy
3 жыл бұрын
So I was nowhere near correct 🤣🤣🤣🤣🤣🤣
@_Dave_S
3 жыл бұрын
@@thatslotcarguy I only know because I used to have a truck with one in the bed lol.
@thatslotcarguy
3 жыл бұрын
I should know as my dad is a trucky 🤣🤣🤣
@Alanbataar
2 жыл бұрын
I just added a MPL Carrera Decoder chip to an older Fly truck. It fit beautifully and was a very simple installation. RE: guide problems, perhaps adding a magnet close to the guide would help keep the truck flat on the track. You mentioned team transport, I'd be very excited to see Rally support trucks. Those are absolute monsters!
@thatslotcarguy
2 жыл бұрын
Avanti is releasing team support cars so I think we are going in the right direction
@paulkomnacki8453
2 жыл бұрын
The Fly trucks all need bigger guides and a lot of weight added up front. Get them right and they can lap as fast as a well sorted Scalex GT. Awesome to race.
@jameslove1363
3 жыл бұрын
Enjoying your channel Scalextric made a truck with a trailer with Sauria Williams livery. Cheers Jim
@thatslotcarguy
3 жыл бұрын
Thanks mate, and here is my review of the truck you are talking about kzitem.info/news/bejne/qGOtroVtbnlogHo it's an older review so quality is a little off
@CBKenyon
3 жыл бұрын
I got some trucks in a lot I bought. Incredible detail. Things are really top heavy and tend to de-slot. Don't buy one - get two and race someone else - also, look for two different colors - there are some wild liveries around. If you lurk on everyone's favorite auction website, you'll see them on the cheap once in awhile.
@rhysthomas209
3 жыл бұрын
Hi Travis another great youtube, it's called the turn table ie where the trailer connects to the prime mover regards rhys watsonia
@DanJacko27
3 жыл бұрын
Love the look of these trucks! Saw some truck racing at Donington Park a few years ago absolutely nuts!
@thatslotcarguy
3 жыл бұрын
Donington Park 😍😍😍
@DanJacko27
3 жыл бұрын
@@thatslotcarguy I'm really lucky where I live I'm only an hours drive away from Donington Park and Silverstone. And in the next village from mine 5 mins away I have Mallory Park 🏁🏁 I've just ended up buying one of these MAN trucks after watching this video really excited for it to turn up now 😁😁
@deanjohn9203
3 жыл бұрын
Nice review of the MAN truck. I have 4 that have been modified to perform better than box stock - upgraded with NSR kit 9217, a Scaleauto SC-0028 motor and a SC-1603 deep guide. Those mods transforms the truck from a toy to a racing vehicle! Do an UPGRADE video of you making those changes and then posting a new time on the board!!
@thatslotcarguy
3 жыл бұрын
Mate I think I might have too.. let's see if I can find these parts
@edhitchcock5730
3 жыл бұрын
Nice work on the review was glad to see the dually tires in the rear I'm a non magnet racer so chassis look good for putting weights on thanks for the heads-up on the guide only thing I see missing is the scale
@thatslotcarguy
3 жыл бұрын
I do agree on the scale but don't let that turn you away from one as a group of these would be a blast
@heathnortonflag
3 жыл бұрын
Those trucks are amazing. I'm not sure how they would do on my track, as I run a wood track, and I have some pretty tight corners. I also run Urethane tires on my track, which I'm not sure anyone makes for those trucks. I'd like to see you tune it and see if you can beat the best time of the out of the box cars you have tested. Keep up the great videos.
@ag132slotcarracing4
3 жыл бұрын
I run mine on a wood track too, it runs really well, even through our tight technical section. I added 10g of weight behind the guide blade and another 5g on the rear but I would advise upgrading to NSR front and rear alloys as well as their supergrip truck tyres, it takes it to a whole new level. I actually put an NSR King Evo 21.4k motor in one of mine and it certainly shifts. Hope this helps :)
@johnd8892
3 жыл бұрын
MJK in Adelaide make good urethane tyres for Fly trucks. Just one tyre outboard on the dual rears gives plenty of grip without being tippy. We are about to start a race series for the Fly MAN trucks exclusively on the four routed wood tracks in our race group. The MAN being easiest to get with lots of liveries. Few mods, just MJKs, a Ninco wood guide, brass tube glued in to set the front axle better and some higher reduction gearing to give better motor braking and they go really well against each other.
@thatslotcarguy
3 жыл бұрын
Yes support our Aussie tyre brand 👍
@Mac0666
3 жыл бұрын
Great Video Travis, your truck run's a bit better than mine ;) Looking forward to seeing what you do to it, to get it up that leader board! Cheer's mate.
@jamesvozar1
3 жыл бұрын
Liked and subbed, Keep up the great work mate.
@thatslotcarguy
3 жыл бұрын
Really appreciate the support...and thanks for us mate 🦘
@6foot7dad
3 жыл бұрын
Awesome truck! Another great review.
@SlotCar2021
3 жыл бұрын
You need to get the Mario Carrera sets if you haven't got one. So much fun, banked curves and loop the loop.
@ollien3359
3 жыл бұрын
Digital conversion should be pretty easy for SSD - but you will need to drill a hole fore the IR LED up close to the guide. I have only converted 1 FLY truck to digi, but it has a different chassis layout. For carrera, your best bet would be one of the new slot.it SP43 universal carrera chip, or the O201C1 o2/SSD/Carrera digi chip - both of which I have not tried yet, but keen to test them out - I just need some carrera digital track to play with :D Nice one!
@thatslotcarguy
3 жыл бұрын
Yes come to the dark side 😜
@josephreber525
3 жыл бұрын
You never disappoint Sir!
@thatslotcarguy
3 жыл бұрын
I try not too Joseph 🤣
@Dracoool
3 жыл бұрын
Greetings from northern Alberta Canada.
@thatslotcarguy
3 жыл бұрын
G'day mate and welcome to my channel 🙂
@3roomsraceway612
3 жыл бұрын
Slot Grandprix here on KZitem have installed the digital decoder in these trucks but I’m not a fan of the finished product There is a new smaller decoder by FT that would be better suited for these trucks
@jamesvozar1
3 жыл бұрын
@ Travis, remember the old Bathurst sets? with Brocky and DJ. That was my first when i was a young sprout.
@ag132slotcarracing4
3 жыл бұрын
Definitely up for sending a few cars out, I'll message you for further info :)
@thatslotcarguy
3 жыл бұрын
Thanks mate 😊
@SlotCar2021
3 жыл бұрын
F1 chip might work, shame with the front axle that it is just slopping around. I would send a car but would want it back. Maybe there are some local viewers that can get their cars back, really like that idea though. I have some scratch built cars with custom paint but lots of money thrown at them. Maybe you can feature pictures of viewer cars?
@guidetrack9151
3 жыл бұрын
5th Wheel!
@thatslotcarguy
3 жыл бұрын
?
@guidetrack9151
3 жыл бұрын
@@thatslotcarguy A tractor Hitch is commonly referred to as a 5th Wheel, a tractor being the big bit in front with an engine! LOL Apologies for the confusion.
@thatslotcarguy
3 жыл бұрын
Ahhh that makes sense 😂😂😂😂 thanks for the info mate
@ag132slotcarracing4
3 жыл бұрын
I think they're 18,000rpm motors.
@thatslotcarguy
3 жыл бұрын
Thanks AG
@marks.17
3 жыл бұрын
Would you please mute that bird.
@thatslotcarguy
3 жыл бұрын
🤣🤣🤣 which one... A family of magpies like to sit on my shed when I'm reviewing...I will pass the message onto them for you
@marks.17
3 жыл бұрын
@@thatslotcarguy that's hilarious. They must be fans of your channel. Enjoy the reviews.
Пікірлер: 51