Thanks !! have a very odd 6040 chinese Mill but you are helping me out!!
@stevesfascinations1516
Жыл бұрын
Hi timcki, I am glad it helped, KZitem is a wonderful way to learn and share!
@umargul5644
3 жыл бұрын
Great job sir, keep it up
@stevesfascinations1516
2 жыл бұрын
Thanks! I find CNC fascinating! I find it so interesting that you can come up with an idea and have a machine do what you want. Thanks for watching!
@billlowe4131
Жыл бұрын
HELP Steves!! LOL I have set my ports and pins input to IN4... 3 - 4 as shown. I unchecked the the active low. (when it is checked the digitize light is on as shown) My Z will come down after a short delay. It will not stop. I checked the continuity on my wires. Just spent 2 days trying different settings with no luck. Suggestions? Thanks in Advance from Galveston, Texas Bill
@stevesfascinations1516
Жыл бұрын
Hi Bill, thanks for watching the video! I was using my machine yesterday and used the auto Z feature several times and it is working perfectly. Let me go out to the shop and see the settings and I will update you. The easy way to test it, is click the auto zero button, and then after it counts down and starts to move, press the button (do not use a bit as you are testing the feature). It should stop and say "Auto Zero Completed" and raise up about .6 of an inch. I will get back to you in an hour or so.
@stevesfascinations1516
Жыл бұрын
Hi Bill, thanks for the email. In case anyone else is having trouble, here is the mach3 pin setup for the probe: What I have is: Probe Port: 3 Pin: 4 Active Low Emulated HotKey: 0
@PickArt_Pickguards
2 жыл бұрын
cannot download script from link
@stevesfascinations1516
2 жыл бұрын
Hi Funny Web Place, that is strange, I just checked and the link is valid and works. You can request the information from the original author at: sunny5rise@gmail.com Thanks for watching!
Пікірлер: 9