You need to do reviews of other people’s trucks. Starting with mine lol . I’m in Dallas
@alfredomontero289
5 жыл бұрын
I have the same kit love the way my truck rides am in philly representing dallas
@m6ndohernandez339
5 жыл бұрын
Love the truck clean and simple and still breaks necks
@shonschindler6030
5 жыл бұрын
Hey nice truck I wanted to know how level the rear of your truck is does the left side sit lot lower than right side. Mines pretty bad even without much gas. Did your front wheels move back after lowered my left wheel back farther than right side
@thekidgutierrez7072
2 жыл бұрын
What size are your wheels and tiers just wondering are the good on highways and traveling far I seen ppl say 22 are safer then 24 if you like traveling far
@linc2356
3 жыл бұрын
2 part question what brand and finish are on the wheels, and would u consider selling them
@mommykiller51
5 жыл бұрын
Do you have issues with the bed Squeaking when you shake it left to right in a downward motion?
@KoMan179
5 жыл бұрын
Did you add that clear film to your front bumper ? I want to color match my truck but I’m not looking forward to the rock chips lol
@MichaelWilliams-dt3jf
5 жыл бұрын
What's up Reese!! We met at QT. Man the truck is clean the way it is. But whatever makes you happy.
@reeseanderson9721
5 жыл бұрын
Haha man! right when i uploaded this i was like i wonder if Michael gonna see this haha! i appreciate it man yours is clean as well!
@jerrygarcia270
5 жыл бұрын
BEAUTIFUL TRUCK
@rudyespino17
5 жыл бұрын
Did you get rid of the blacked out tail lights? Reason I ask I got the same ones but with all the rain in Fort Worth some water made it in the lights curious to hear what happened to yours?
@brianlawrence9493
4 жыл бұрын
Can you still run a 26 with the INEZ kit but have 0 gap like when you ran the mcgaughys kit like in your older video????
@goofy199456
4 жыл бұрын
Where did you got your alignment done?
@Rickster818
5 жыл бұрын
If you do tub the front please review it I have a crew cab Denali lowered as well and I’m considering it highly just not sure about it
@johnstarks65
4 жыл бұрын
WHAT PLACE IN IRVING DID U GET UR TRUCK DONE ??? IM IN DUNCANVILLE TX.. LET ME KNOW
@jonathangamboa6546
5 жыл бұрын
I would give up the world for this truck 😍😍😩
@chriza7815
5 жыл бұрын
Do 28's & tubs bro. It stands good to me. If you want to go an inch lower like you said then go for it. You probably going to have to cut some of the fire wall and re locate a few things under the hood.
@STREETRACEN4U
5 жыл бұрын
I found a lowered new body truck today that look just like yours but with escalade wheels on it, at first i thought it was your old one. i took a picture of it and can email it if you want. the side of the bed was dented in though : /
@tonymendoza260
5 жыл бұрын
7-9 mcgaughys lift on 26x16/ 37s. upgrade to the ltz/high country headlights.
@MrJunior6939
5 жыл бұрын
Thanks for the review
@Abel3270
3 жыл бұрын
What do you think about McGauys lowering kit?
@subialdea26
5 жыл бұрын
Looks good as is, I’d keep it and try some other rims. Out of curiosity what’s your price for the truck?
@CarlosDiaz-uw1jj
5 жыл бұрын
Where do you buy your wheels?
@raymundoledezma3530
5 жыл бұрын
how much would you leave the truck for if you sale it ??
@eduardogutierrez665
4 жыл бұрын
Can you please give me the info on your suspension guy installer thanks Good video
@MuasKe
5 жыл бұрын
How much was parts and labor?
@jonathanlegarda8512
5 жыл бұрын
Wat size r you wheels
@el_nino_maldito1822
3 жыл бұрын
Bro what’s the shop that did your lowering kit
@marioperez1343
5 жыл бұрын
Nice truck
@davidcolorado703
2 жыл бұрын
What drop is that
@brickkickz6556
5 жыл бұрын
Drop another video so hard to find dope dropped truck youtubers 👍🏼
@jorgefernandez7138
5 жыл бұрын
Running a 2 piece drive shaft ? I got the stock 1 piece on my crew cab and had to notch both my crossmembers but noticed front of driveshaft rubs on the cab now if I have a lot of weight 😂
@martinezantrax
4 жыл бұрын
What drop u get?
@erikgarcia4824
5 жыл бұрын
Where did you get you bed cover?
@dperez2009
Жыл бұрын
2wd or 4wd
@alexplatero2767
5 жыл бұрын
How you like those over DJM control arms
@NKKUSTOMS
4 жыл бұрын
Same control arms,IHZ was using moog but not anymore maybe they using a premium private balljoints now
@Dan-iel87
5 жыл бұрын
Ayyyye Garland! Me too
@juicyrzrturbos8982
5 жыл бұрын
How much was your kit from ihc?
@raymundoverastegui7109
5 жыл бұрын
North west dallas here bro💯
@Martinezjr94
5 жыл бұрын
Raymundo Verastegui whack
@aldodelrio5197
4 жыл бұрын
1SlowAvy Cho ass up
@JesusPerez-sy5or
5 жыл бұрын
Pass on ihc kit don’t align like they claim and they full of bs . He was probably cool with u because u have a KZitem channel but costumer service is ass . I think mcgaugjys and djm would be your best bet for your $ they been around longer 👍🏻
@erickmayorga9684
3 жыл бұрын
what drop
@RubMySchmeat
3 жыл бұрын
Looks straight like a cartel truck
@rigolinares4281
19 күн бұрын
Any one else have trouble greasing upper ball joints
@brickkickz6556
4 жыл бұрын
I’m running a 2019 Chevy 3/5 inez kit and rides like a dump truck
@PanchoPistolas45
4 жыл бұрын
BrickKickz 😂😂😂
@logantic
4 жыл бұрын
I have a 2016 ford f150 crewcab with ihcsuspension and it rides rough up front and the bushings squeak a lot even after re greasing it. Swapped it out for some Maxtrac spindles with belltech lowering shocks and it rides way better then the ihcsuspension.
@hacksawjimthuggin7411
3 жыл бұрын
Thats on you then. There is no reason the suspension would change at all.
@fredo-htx7384
5 жыл бұрын
what size rims?
@mrzee5354
2 жыл бұрын
24
@trotski3667
2 жыл бұрын
I bet the upper a arms were too long on the tubes I bet you had to cut them at least a quarter of an inch so you can get the truck to align. Because that is what I had to do. But then they wanted me to buy the other said that fixes it. I’m just saying. Buy Bell tech
@m6ndohernandez339
5 жыл бұрын
What you do for a living ?
@51-FS
5 жыл бұрын
M6ndo Hernandez probably hangs Christmas lights
@m6ndohernandez339
5 жыл бұрын
Bart Simpson don’t hate just because he doing better than you 😂
@51-FS
5 жыл бұрын
no hate here... just answering your question... thats what he said in this video...
@PanchoPistolas45
5 жыл бұрын
Bart Simpson calm down keyboard cowboy. I know someone that does that and makes a decent wage so fuck you for trying to put people down
@IAMWAXX
5 жыл бұрын
Xavier he wasn't putting anyone down lmfaooo 😭😭. He said it in the video. Y'all dumbasses need to calm down. 💀
@victorsalgado1835
5 жыл бұрын
Hey man I installed a 4/6 drop kit on my 18 Chevy Silverado 4x4.. so I put some 26x10 borghini but now the rear is shaking like crazy..put my stock wheels and it still shakes.. I took it to get the opinion angle right they said it was off so they fix that but it still shakes on the rear.. you know what else could be or have you had any of problems? Need help
@chevelle507
4 жыл бұрын
Pinion angle*
@NKKUSTOMS
4 жыл бұрын
Do they adjust the pinion angle right ,,,also these trucks,have issues with shaking around 65-70 mph could be drive shaft,torque converter on the 8 speed tranny or tranny fluid, Some people do the rear end axles and re balance the drive shaft helps but doesn't fully solve the problem.
@limitless9998
4 жыл бұрын
Did you ever find the problem I have the same setup with the same problem
@rayg1217
5 жыл бұрын
Ihc arms are not the best they didnt align for me . He sent me wrong ones , Costumer service was ass he didn’t refund my money . They are real scammers . Best kit is djm hands down
@trotski3667
2 жыл бұрын
Did you change your struts in the front or did you use your stock ones Because mine is doing the same thing. I need to get shorter struts upfront.
@coreytesta9857
3 жыл бұрын
Bag it!
@ricardo1sanchez199
5 жыл бұрын
Knock off tire shops on Buckner LOL..... USA Tires everyone one knows what it is
@cgoldman3
2 жыл бұрын
Only thing is they can’t weld for shit. Done broke 2 control arms & alignment never stays. Gotta say it rides good but isn’t worth being stuck on the side of the road
@reeseanderson9721
2 жыл бұрын
No way??? 👀 got me a little skeptical
@manuelquintana3397
4 ай бұрын
😂🎉🎉🎄🎁4
@brandorios2353
5 жыл бұрын
🤤🤤
@gregmf9427
4 жыл бұрын
Sounds like you want to Please other people about how it looks. If you can’t find a height that’s right for you Just bag it, then you can set it how you think your viewers want it. I thought it was your truck? Maybe just do what you want and not give a sh*t what other people want or think.
@bridger911
5 жыл бұрын
Shit is ruined
@juicyrzrturbos8982
5 жыл бұрын
How much was your kit from ihc?
@rubencristo5825
5 жыл бұрын
Reechoe El destroyer 750$ w/ shipping
@juicyrzrturbos8982
5 жыл бұрын
That’s nice I have a bell tech 2/4 right now on 26s but thinking of going lower
Пікірлер: 84