Just bought one to set up over the winter months in the northeast. Thanks for the tips.👍
@OMOLMentoringinc
3 жыл бұрын
Thanks buying a 106 w minnkota w lowrance fs7 & active target. Where you fishing, we travel to Oswego, NY. Thanks for hacks
@stevehogan8829
3 жыл бұрын
Thanks for the no BS walk through. Nice job.
@ChiCityYaker
3 жыл бұрын
No problem!
@JMD535
3 жыл бұрын
I have to agree about the "no bs",...so many YT'ers are filling their vids with some much bs fluff,....that I find myself just fast forwarding through the vid. I'm not giving them 24 minutes of time for 20 minutes of BS,...for 4 minutes of info,...that is, if they even get to it before I 'jet' to the next vid.
@stevehogan8829
3 жыл бұрын
I'm in Florida and that mount would get torn up first time out. Glad you launch from a ramp only thing I can thnk of us usiing an over the side removable mount for the trans ducer. Thanks for the great vids.
@ChiCityYaker
3 жыл бұрын
Thanks bud!
@networkguy3152
3 жыл бұрын
Thanks for the video! I am buying a hummingbird for my 106 MK and the tip about the Hobie 3 way mount is going to save me some headache!
@ChiCityYaker
3 жыл бұрын
Glad it helped!
@jender7
3 жыл бұрын
Great video and tips! Just ordered a 120 myself. Also, a Chicago area native (Naperville) here eagerly awaiting Spring.
@ChiCityYaker
3 жыл бұрын
Congrats! You’ll love it
@papi6518
2 ай бұрын
Thanks! Getting mine soon. Gotta a stupid deal on it
@CatchingFins
4 жыл бұрын
Great job Michael! gave me some great ideas for my 136. definitely adding the gen 2 gear tracks on mine like that.
@ChiCityYaker
4 жыл бұрын
Nice! Happy to help
@mmancino1982
3 жыл бұрын
Yes old Town through hull ports SUCK! I basically modded mine and waterproofed it myself but should've gone the route you did. Same deal with the transducer. My giant Lowrance StructureScan transducer was sitting too low and the flipping it over hack worked. One thing though, with some of the Lowrance transducers, when you flip it over there's two areas that stuck down and grab on structure. I had to rock myself loose from a log because the metal part of the bracket dug in and refused to let go lol.
@ChiCityYaker
3 жыл бұрын
Lol get a metal grinder and grind those pieces down is what comes to mind. Glad the hacks helped
@mmancino1982
3 жыл бұрын
@@ChiCityYaker I thought of that but I did something similar on a plastic tote and the metal heating up from the grinding melted the plastic. And I think one of the bolts on the "universal Transducer mount" (which I had to drill because the holes didn't line up lol) is cross threaded so I don't really want to take it off and risk it being able to get it back into the brass insert. I know, I'm a mess 🤣🤣
@JMD535
3 жыл бұрын
Excellent "Hack" vid,....my man!
@ChiCityYaker
3 жыл бұрын
Glad you found it useful
@narrativematrix9971
3 жыл бұрын
Thank you ... Huge help !!!
@ChiCityYaker
3 жыл бұрын
You're welcome!
@hunter8turkey1
3 жыл бұрын
Thanks. I want this AutoPilot 120 I think i will get it this week. I found one locally.
@ChiCityYaker
3 жыл бұрын
Grab it then, they are hard to find.
@unclebuck5957
4 жыл бұрын
Great tips simple but very thought out thanks
@cedricbarber3903
6 ай бұрын
This is Spanish for the reason for you to add holes in your kayak does that Voyager warranty
@midwestfishingandoutdoors3077
3 жыл бұрын
Nice job I've been contemplating on buying one.
@RyanRed13
3 жыл бұрын
Thanks for the vid!
@fallofmanbrand
4 жыл бұрын
amazing video
@ChiCityYaker
4 жыл бұрын
Thanks!
@brando24567
3 жыл бұрын
Which model should I buy? 136 , 120 106? Which one will be least capsizable ?
@ChiCityYaker
3 жыл бұрын
any kayak can capsize if misused. Hard to recommend without knowing the kinds of waterways and fishing you'll do. But I think the 120 is a good middle of the road one to go with.
@stevehickman7247
3 жыл бұрын
Sir, with regards to the USB port mounting, what size drill did you use to cut that hole? I bought a Nocqua USB port and it seems to measure just a bit more than 1” on n diameter. Did you use silicone to help add a bit more robust seal? Thank you!
@ChiCityYaker
3 жыл бұрын
I wanna say its a 1-1/8th size. In fact I think its the same size hole you have to punch to for a hobie through hull.
@joseurena5247
3 жыл бұрын
One thing I don’t like about my old town autopilot it doesn’t support ipilot link so I can network my kayak
@cliffbolin7716
3 жыл бұрын
Thanks. Looking to get mine set up when I get it in the mail. But with all the holes you put in yours, did it effect your warranty?
@ChiCityYaker
3 жыл бұрын
nah, its pretty standard that everyone drills into the yak but as long as you don't drill into the hull. Then I think it would impact it.
@zachschultz3534
4 жыл бұрын
Awesome video. Just curious what made you go with the aluminum tracks vs adding plastic ones like the front and the back? Also how would you rate the yak attack rod holders vs scotty?
@ChiCityYaker
4 жыл бұрын
went with aluminum one's because they don't need backing plates. Be design it just has a a bunch of self-tapping screws. Otherwise with plastic one's I'd need access to back side and that can't happen. Also, love the Yakattack rod holders. I think they're much more functional.
@OMOLMentoringinc
3 жыл бұрын
I brought stealth rod holder w extension
@zanderferretti9065
4 жыл бұрын
Good ideas but you know you voided the hull warranty by drilling into the hull. Downsides.
Пікірлер: 44