Thanks so much for showing your tools and skills. Your videos are my goto as I learn this business. In the process of making my skinning machine now modeled quite a bit after yours.
@blackriveroutdoors5561
7 жыл бұрын
I watch all of your videos, and I love watching them. Im new to trapping and handling fur and your videos are so informative and helpful.
@claytond6565
8 жыл бұрын
Thanks so much for your videos! They truly help!
@CoonCreekOutdoors
8 жыл бұрын
+Clayton Dowless thanks
@ridgerunneroutdoors8936
9 жыл бұрын
great video was wondering is there any special height and clamps to use thanks and good luck in your season
@NSTRAPPERHUNTER
10 жыл бұрын
Thanks buddy for showing us your setup. I will for sure be making one of those skinning machines. Great job my friend and the best of luck.
@CoonCreekOutdoors
10 жыл бұрын
no problem.
@donvincent895
3 жыл бұрын
I built that skinning machine and it works great, I did change the half 3 quarter inch pipe to flat bar. Saves a lot of time.
@blindsquirrelproductions2817
10 жыл бұрын
Freak'in genius! man gotta have one of those!! Looks well engineered. Definitely a necessity for a longliner.
@CoonCreekOutdoors
10 жыл бұрын
thanks
@BiggerAlan
Жыл бұрын
Excellent skinning contraption that makes the best use of your time and labor. Thanks for sharing the measurements in the video.
@rickmajurin8601
7 жыл бұрын
I like that skinning machine. I'd like to build one like it and use it for skinning deer also. I have a couple pieces of that street sign square material out by my garage.
@42pierce
4 жыл бұрын
What size square tube is that? And how long is the rebar arch at the top? Nice job and love the the videos!
@nicsalamin
6 жыл бұрын
How do I loosen up the free jaw on my new Duke #3 traps, bout half of them don’t move freely. When Im bedding them and want to lift the loose jaw to add some dirt or maybe adjust the pan ect. , the whole trap moves and screws up a solid bedding. Even after waxing , they’re still stiff ? Do I need to file something or drill the hole out near the small end of the jaw or what, any suggestions would be helpful. Watch lots of your videos, very educational and informative/ realistic, appreciate the authenticity.
@kevinkendall6956
6 жыл бұрын
Hello. Can you tell me how the foot hold clamp is attached to up right support?
@natemiller332
4 жыл бұрын
I love it, the main piece is made out of the same stuff as stop signs, LMAO. Great video
@krreeves1
8 жыл бұрын
what is the distance from the base to the post that holds the vise grips, the length of the rebar and the height of the sign post. Thanks for the info.
@georgeantonaros5580
8 ай бұрын
Very Nice Setup !! 🤗
@jimroyce9159
5 жыл бұрын
Great video! Love your dog in the chair!
@danacassner4067
4 жыл бұрын
What is the height of your skinning machine I'm building a new shed and need to know for clearance love your channel learning alot thank you
@johncrowley3803
2 жыл бұрын
When you weld the pipe to the vise grips do you smooth off the edges of the pipe to prevent putting holes in the pelt?
@bradleycoles8273
9 жыл бұрын
Great Machine going to build me one of those this summer. Good luck on the line.
@CoonCreekOutdoors
9 жыл бұрын
***** thanks. im sure there are things that could be improved or that you could customize to fit your own personal needs. good luck with your project.
@jessemorgan1776
Жыл бұрын
Are those 10” vice grips? Keep up with the awesome videos!
@jerryrobbins5115
10 жыл бұрын
that thing looks like it would help a guy after a hard days trapping,you sure put some time in designing it i can see . nice work and thanks for sharing
@CoonCreekOutdoors
10 жыл бұрын
thanks
@TomsBackwoods
4 жыл бұрын
This is a pretty old video. Have you changed anything since the move or updated and improved the design at all?
@theturtletank4406
4 жыл бұрын
What size vice grips did you use
@sterlingchittum480
7 жыл бұрын
Looks like you have good trapping in your area.I am planning on moving in the near future. Any suggestions on a new location, with good trapping? Best wishes, Sterling
@tackermccready6301
4 жыл бұрын
Man I need all the measurements for all of it. I’m rewatching the video over and over in this welding shop trying to figure it out. Just don’t want to cut something wrong and it not work
@theundomesticatedgentleman5721
8 жыл бұрын
how do you power your winch?
@Nightravenspeaks
4 жыл бұрын
Some thought went into that. I like the vice grip
@coltonwelsh1713
5 жыл бұрын
This video really helped me skin out my first coyote didnt turn out the best but it's a start
@johncole5388
9 жыл бұрын
Your info was very helpful . Thanks for sharing .
@CoonCreekOutdoors
9 жыл бұрын
john cole thanks
@doublecheckityt
4 жыл бұрын
I'm thinking 3/4" pipe with 1/2" or 3/8" rebar in the grips.
@baileyissocool3229
6 жыл бұрын
Love the sign you have that says fire obama
@pensnut08
9 жыл бұрын
Appreciate the measurements. Where did you get tubing (the traffic sign one)? How far out from the main frame did you go out to where the base (clamps) are? How high is it to the upper pulley? And the length of the rebar? This is a GREAT rig!! Kudos to you!! I am making one. Sorry for all the questions :) Have a great season
@CoonCreekOutdoors
9 жыл бұрын
pensnut08 go to the scrap yard. make the thing a high as you can. keep the clamps and top pulley plumb with each other so it will pull straight. best of luck to ya
@linklesstennessee2078
6 жыл бұрын
Awesome machine CC add a bucket seat and padded vice grips for a redhead lol just joking I’m getting old I need to make one of these
@toddjacks8288
2 жыл бұрын
Love ur video brother
@mikestone8438
10 жыл бұрын
Great setup.
@CoonCreekOutdoors
10 жыл бұрын
thanks
@lucerollamas1563
8 жыл бұрын
still the best I've seen
@nervousfishyy
10 жыл бұрын
That's real nice keep up the good work.
@CoonCreekOutdoors
10 жыл бұрын
thanks
@Retiredatlast65
5 ай бұрын
In action?
@REAPERMILITIAOUTDOORS
6 жыл бұрын
Badass brother
@2ndamendmentSam
10 жыл бұрын
Nice set up!
@CoonCreekOutdoors
10 жыл бұрын
thank you
@dans4270
3 жыл бұрын
Can we see it in use?
@marco-oe9wh
7 жыл бұрын
good jobs
@ilive2h642
9 жыл бұрын
Nice, thanks for sharing.
@CoonCreekOutdoors
9 жыл бұрын
glad you enjoyed
@erinarmstrong1206
8 жыл бұрын
About how high is your ceiling I have barely 8 ft ceiling to work with
@CoonCreekOutdoors
8 жыл бұрын
Erin Armstrong 9 ft
@Nightravenspeaks
4 жыл бұрын
I'd like to see a demo
@wallaceviviansadventures2095
10 жыл бұрын
good setup.makes skinning easier
@CoonCreekOutdoors
10 жыл бұрын
sure does. thanks
@NLGhostWolf
9 жыл бұрын
Would love to see this skinning machine in use.
@CoonCreekOutdoors
9 жыл бұрын
NLGhostWolf take a look at this. kzitem.info/news/bejne/x4qGk4yQraqDho4
@dthomas913
9 жыл бұрын
What brand is your winch? Is it AC or DC power? Thank you.
@CoonCreekOutdoors
9 жыл бұрын
dthomas913 just a cheap dc atv winch
@catfishjohn56
5 жыл бұрын
nice machine mabe show skining criter thanks js
@kyleragan1457
5 жыл бұрын
Jon Smith watch his fur handing videos it’s in there
@beaverrick9789
9 жыл бұрын
Damn thats slick!!
@CoonCreekOutdoors
9 жыл бұрын
BeaverRick thanks
@christiansullivan4747
10 жыл бұрын
Really nice machine it looks better than what you can buy
@CoonCreekOutdoors
10 жыл бұрын
thanks
@TimberLineNorth
10 жыл бұрын
I should weld my visegrips solid to.
@CoonCreekOutdoors
10 жыл бұрын
yeah it does help with speed
@stephenpardysr2390
5 жыл бұрын
i would like to see you use your machine, then i might understand how it works.
@kyleragan1457
5 жыл бұрын
stephen pardy sr it’s in every fur handling video except beaver and muskrat
@ellawilliams3286
7 жыл бұрын
found it thanks!
@backyardmeat
10 жыл бұрын
It's just easier for me to yell at them because its taking so long to get them skinned :).... cool piece of hardware. You should do a fur shed/season update at some point if you get time
@CoonCreekOutdoors
10 жыл бұрын
thanks.
@dallasmccain4684
8 жыл бұрын
How tall is the whole machine
@CoonCreekOutdoors
8 жыл бұрын
+dallas mccain 10'
@lesterlittlefield6293
Жыл бұрын
Can we see how it works
@tristanspears549
7 жыл бұрын
im just starting trapping and need help i live i louisiana and im not sure were to start im getting traps lures and drivers but idk how to sell my fur
@CoonCreekOutdoors
7 жыл бұрын
Your state probably has a trappers association. Contact them for info on local sales
@tristanspears549
7 жыл бұрын
Thank you ive been looking and found a place that sells the traps and lures
@robertmoore1123
5 жыл бұрын
You should copyright the design and manufacturer and sell them .
Пікірлер: 89