I have this laser, It can cut 6mm MDF in one pass in speed 300mm/min and 90% power, for me it's great result!
@TheLouisianaHobbyGuy
3 ай бұрын
Nice 👍
@davidelder5399
9 ай бұрын
The battle of the 20W's continues. ....Great honest review
@TheLouisianaHobbyGuy
9 ай бұрын
Thanks for watching David, as always!
@TheLouisianaHobbyGuy
9 ай бұрын
This laser has some new and different features. You can tell a lot of thought was put into the design.
@patrickcarver7684
7 ай бұрын
Purchased one based on reviews. Seems very underpowered. I've been through the setup process, checked and adjusted the belts, In Lightburn I can finally cut out a basic rectangle if I use 100% power and set speed to 200mm/m. Nothing appears damaged. Box was not damaged. Just seems based on all reviews that performance is well below expected. Tried contacting Algo several times. Waiting for a response.
@TheLouisianaHobbyGuy
7 ай бұрын
Check your S-Value Max in the device settings (wrench and screwdriver icon). It should be set to 1000. Yours might be at 255.
@patrickcarver7684
7 ай бұрын
Thanks so much@@TheLouisianaHobbyGuy
@billholder253
9 ай бұрын
I evidently didn’t hear that it was the air assist controller. This is what happens when one goes above the 76 year age mark, well for some of us anyway. I thought to myself at the time, this sure is a completely different air assist I had been seeing, but since you guys are friends, thought a new product design was being introduced from them to you to show. The size would be a huge improvement over any of the other air assist & have still provide good air pressure at the same time. Anyway, God bless to you & family.
@TheLouisianaHobbyGuy
9 ай бұрын
Thanks Bill!
@LancasterM972
9 ай бұрын
Touch screen like 3D printers and cutting from a file like selecting a file to print. I guess that's one way to do "wireless" engraving. As always your videos are awesome.
@TheLouisianaHobbyGuy
9 ай бұрын
Thanks! Yes, this touch screen if different that most in that it has it's own processor and it's UI is well designed. The 5G is also like what you know on your phone, and the uploads are super fast. You can use the app or the web UI in a browser. This is a solid machine.
@glenn8059
6 ай бұрын
My width & height shows as 399 x 429. The air assist is quite annoying as it's start as soon as you turn on the machine and goes 100% when you start engraving. You have to manually turn it down. There seems to be no way to set it to stay off unless you initiate. Unless I'm wrong. That button to release that pin to focus is hit and missed and not easy to press.
@TheLouisianaHobbyGuy
6 ай бұрын
I think there are a couple of versions of the Delta Glenn. And yes, I too found the air assist a tiny bit annoying, and it was the loudest laser I've tested to date.
@ainttakenanyshit
5 ай бұрын
@@TheLouisianaHobbyGuy BUT, with that noisy GOOD airflow, the laser "lens" is better kept from burnt particulate matter from getting it dirty. For me, I'll take a bit of air "noise" if it helps keep the laser clean....
@around-we-go
9 ай бұрын
I wonder if the laser head isnt adjusted correctly. Grab the head and move CW and CCW for movement. One I had would move side to side. Might explain the line wobble.
@TheLouisianaHobbyGuy
9 ай бұрын
Nope, mechanically it's perfect. I checked and rechecked it. It's a speed issue on the X. At 25K it works fine.
@danielthomas3236
9 ай бұрын
Great review. I was looking forward to it. I'd like to see diode machines have a work area of either 300x300 or 400x400, with extension kits available. I can cut a 4ft x 8ft sheet of material down to those sizes with little waste.
@TheLouisianaHobbyGuy
9 ай бұрын
In all reality, I work mostly in 12 x 12" Daniel, so 300 wouldn't work for me.
@danielthomas3236
9 ай бұрын
@@TheLouisianaHobbyGuy Yeah, and if you're working in that size, it would also be good to have some extra room for overscan.
@TheLouisianaHobbyGuy
9 ай бұрын
The LaserMATIC is 415 wide, so I have plenty of room for overscanning on a 12x12. When the Mark 2 XL comes out next year, it'll be over 600mm wide.
@stevemisher7197
9 ай бұрын
Sounds more like the Lasermatic is still the way to go
@TheLouisianaHobbyGuy
9 ай бұрын
No doubt in my mind Steve!
@johnfirth3752
9 ай бұрын
I got I’mine yesterday and works well But having some problems with It stopping And Same as you with console scrolling
@TheLouisianaHobbyGuy
9 ай бұрын
Contact their support. They'll help you John.
@brianmack6285
9 ай бұрын
WRT inflated speeds: while the marketing dept might have tweaked the numbers, could the acceleration settings have hampered the overall timings? What % of the line is spent getting up to speed at the start and slowing to a stop at the end? THX for another informative review!
@TheLouisianaHobbyGuy
9 ай бұрын
Very little Brian, since 99% of the job is scanning at 0°.
@northwind7409
9 ай бұрын
Is it possible that the new machine has the accelerations set too high? That could explain both the wavy sides and the faster engraving job.
@TheLouisianaHobbyGuy
9 ай бұрын
It could be, but a new user would have no idea what to do. I have already reported it to the company. 25K scanning is the highest I can get on the line tests without distortion.
@romanasu28
8 ай бұрын
Hi..would you rate this over the Acmer P2 33 W and Longer B1 33 W in terms of cutting abilities also??...i am looking to buy my first laser and beside engraving i would like to cut 18-20 mm pine quite often. I like this one due to ease of use for a begginer (am i wrong??)...would You recommend something else in the 1000$ price range??
@TheLouisianaHobbyGuy
8 ай бұрын
I would recommend a saw to cut 20mm pine.
@romanasu28
8 ай бұрын
@@TheLouisianaHobbyGuyLol...Already have one, thanks for the answer, Happy New Year!!
@srflow2
9 ай бұрын
Rich, I know this is a review for Algolaser, but my question is. Does the 10w Lasermatic come with an exhaust system to vent it out of a basement window?
@TheLouisianaHobbyGuy
9 ай бұрын
Yes, the LaserMATIC is an all-in-one system.
@muhammedirshaad
7 ай бұрын
How would you compare this to the Xtool D1 pro?
@TheLouisianaHobbyGuy
7 ай бұрын
The D1 is way overpriced for what you get.
@homezero
9 ай бұрын
Very informative review. Thank you. Question: Have you completed any videos with lasering images on fabric?
@TheLouisianaHobbyGuy
9 ай бұрын
Not yet, but I have run tests on fabric for the settings.
@homezero
9 ай бұрын
@@TheLouisianaHobbyGuy I'd be interested in watching that. I hope you post it soon. Hey, thanks for the reply.
@billholder253
9 ай бұрын
By having the air assist taped down to the frame, could this be a cause for the squiggle lines? Just a thought.
@danielthomas3236
9 ай бұрын
He just has the speed controller taped to the frame, not the pump.
@billholder253
9 ай бұрын
@@danielthomas3236 thanks for the update.
@TheLouisianaHobbyGuy
9 ай бұрын
No Bill.
@dirk4280
9 ай бұрын
Hi Rich, thanks you for those nice videos. I learned a lot about Lightburn. I’m new with laser and burn a kind of material. If got a new Atomstack S10 Pro it burn from the remote control perfect. And works good with other software. I want to work with Lightburn but from met laptop it doesn’t burn on my material? What must is do? Is there a standaard settings. I use something what Atomstack give me, but still it doesn’t burn 😢 I hope you can help me.. thanks from Amsterdam. Leo
@TheLouisianaHobbyGuy
9 ай бұрын
Hi Leo, I don't know what the problem is, but Lightburn has an extensive support forum where a tech can answer any questions you might have: forum.lightburnsoftware.com/
@ainttakenanyshit
5 ай бұрын
Question please.... What is the maximum marking speed on anodized aluminum that you were able to get good results without squiggles in the text, (Ariel),? I've had to limit my speed to 500 mm / min on my Alpha to get good text without squiggles. Any attempt to use 6000 or even 3000 mm / min produced these d squiggles. Thanks for your testing and reply....
@TheLouisianaHobbyGuy
5 ай бұрын
That's likely a belt tension issue. I would suggest you join the AlgoLaser Facebook group. There is a tech that monitors all the posts there and can help you get it resolved.
@ainttakenanyshit
5 ай бұрын
@@TheLouisianaHobbyGuy Thanks for the shout. I've sent an e-mail to support with pictures to show the issue. I'm NOT a fan of ANY government sponsored SNOOPING via these bull$hit "social media" sites. It is amazing that there so damn many "sheeple" that willingly post their information for these spying ba$tards to keep their eye on you.... Two words -PHQUE THEM....
Пікірлер: 51