I just had the same thing happen to me. Heavy traffic to get on highway and maybe 1/4 throttle at most and the blew up. 64mm from RDS and the shaft snapped, wheel grenaded and nut was loose. They told me when i dropped it off "yeah that happens." Waiting to hear what they say. Maybe 1k miles on it. No boost leaks either. Idled it for 10 minutes like they said, primed it how they said, so idk what happened.
@tallgeeseheavy5311
11 ай бұрын
Well. My actuator isn’t working well and my 68 has failed again. Idk what to do 😂
@stevecastor4298
3 ай бұрын
Right Lane, never
@wes7517
11 ай бұрын
Turbo time USA baby
@wes7517
11 ай бұрын
Highly recommend them for customer quality along with product quality I got the turbo they recommended for my fummins setup
@EVERYTHANGDIESEL
11 ай бұрын
Heard a few folks talk about them. They seem to have a good reputation
@scottyfilms9301
10 ай бұрын
Ever thought about a fleece cheetah drop in 63mm ?
@nathanhayes4160
11 ай бұрын
How was you able to turn the truck off? I heard you say when you tried to press the button to turn it off it didnt kill
@EVERYTHANGDIESEL
11 ай бұрын
It turned its self off, once it ran out of oil
@ridgerunner6008
11 ай бұрын
I can almost smell the oil
@EVERYTHANGDIESEL
11 ай бұрын
😂😂 thats how u know its bad lmao
@rghnck9018
11 ай бұрын
Check out Point Blank Performance!
@EVERYTHANGDIESEL
11 ай бұрын
I've checked them out they got some good stuff!!
@DPats1228
11 ай бұрын
I had good luck with Tater built turbos in the past
@EVERYTHANGDIESEL
11 ай бұрын
Tater built and turbo time usa are the only companies I have not heard anything bad about with there vgt turbos
@DPats1228
11 ай бұрын
@@EVERYTHANGDIESEL I used one on my 5.9. Non vgt. I forgot I used diesel per source for my 2017. The turbonator was awesome
@TXRed1836
11 ай бұрын
I have had two RDS turbos fail. Didn't even bother sending them the second one back. Not a chance I'd run another one of their units.
@EVERYTHANGDIESEL
11 ай бұрын
Damn sorry to hear that man.
@marrag1
11 ай бұрын
Was it a VGT turbo? I hear so many other KZitemrs praise Ryan for his work. I don’t get why others are having bad luck with them. I have a ATS Aurora 4000 turbo blew the oil seals twice already in the past 3 months I had it. ATS keeps blaming my truck for excessive crankcase pressure but I had two mechanics look at my truck and say everything checks out ok no bad head gasket or excessive ccv pressure.
@TXRed1836
11 ай бұрын
@@marrag1 Fixed vane. They failed in different ways too. The shaft snapped on one and a blade came off the turbine on the other.
@marrag1
11 ай бұрын
@@TXRed1836my ATS failed with just seals blowing up and dumping oil into my down pipe. Damn and I just bought an RDS turbo but I made sure to change my air filter and checked for excessive crank case pressure.
@EVERYTHANGDIESEL
11 ай бұрын
Fixed vanes can definitely break too, it's just not as easily. When u have more parts involved the risk is always higher.
@geneheiser9054
10 ай бұрын
Get some MicroBlaze out of Houston Area. Mix it with water and spray on oiled area. It eats the oil and makes it safe to spray off. EPA friendly
@StVick
11 ай бұрын
Daaaaaaaamn braaaaaaaa that big cleeeeeeeean!!! Literally the best color combo and trim level ever. That's my dream truck. I'd put some white 5 hole steelies wheels on the front and rears with chrome center covers and keep the same tires going....then she be perfect
@EVERYTHANGDIESEL
11 ай бұрын
Haha appreciate it bro! 💯✊🏾
@jarrettjones4690
11 ай бұрын
Cam with shades = Cam dgaf 🤣😎
@twinturbosrt6088
11 ай бұрын
I do need an actuator for my 2010 mega cab
@EVERYTHANGDIESEL
11 ай бұрын
I'm selling mine $500, basically brand new. Shoot me a email at everythangdiesel@gmail.com or DM on Instagram @everythang_diesel
@joshhare353
7 ай бұрын
Tell me why my RD turbo did the same thing today when I got off work! Loud noise a whistle sound and smoke rolling out the exhaust!
@dadbod_diesels
Ай бұрын
Unfortunately it just happened to me. Maybe 1/4 throttle and boom. 1,000 miles on it. No boost leaks. Followed RDS instructions to the T.
@danielcresswell5064
10 ай бұрын
Check out ago turbo out of tempe az, and black narket performance out of utah, they both have nice 2nd gen kits, ive ran an agp kit and now i have a bmp 480/366 compound kit going on my 4th gen
@SpencerA99
11 ай бұрын
Do a dedicated grid heater delete video. I'm wanting to do that and add a heater into the intake horn. But those injectors and high pressure fuel system scare me
@EVERYTHANGDIESEL
11 ай бұрын
Don't be afraid to do the grid heater delete its a straight forward job. When u break the injector lines loose there's no pressure in them. Fuel Rail isn't pressurized when the pump isn't running
@EVERYTHANGDIESEL
11 ай бұрын
Imma make a dedicated video installing the grid heater delete
@larrybroberg4162
11 ай бұрын
Your lucky you didnt have a run away
@EVERYTHANGDIESEL
11 ай бұрын
I agreee!!
@julioi915
11 ай бұрын
Been running a fleece cheetah no issues couple of years now
@EVERYTHANGDIESEL
11 ай бұрын
Fleece cheetah is a decent unit
@gemcityfireman
11 ай бұрын
Are you still running CCS tuning? No issues with the tune and the turbo? More of a quality issue with the turbo? Just curious…
@paulg444
11 ай бұрын
wow, I have never gotten to even 20psi boost.
@EVERYTHANGDIESEL
11 ай бұрын
From what?
@Cumminsmcgee
11 ай бұрын
@@EVERYTHANGDIESELFor the plat for grid heater have you thought about just cutting the heater element out??
@EVERYTHANGDIESEL
11 ай бұрын
@Cumminsmcgee I have but a grid heater delete plate is 90 bucks and less amount of work haha
@Cumminsmcgee
11 ай бұрын
@@EVERYTHANGDIESEL iv thought about trying it with out taking it off and because the fuel lines is wat scares me with doing it
@AdventureswithTorrian
11 ай бұрын
Damn bro sorry to hear that. You good with ya hands and you will be back up and running in no time
@brentmcmahon8188
9 ай бұрын
Let’s see what Ryan’s diesel is going to do but you have kinda bad mouthed him so it may be a tuff ride. You should off not said a thing until Ryan’s diesel got the turbo and said what they were going to do but you never know I wish you good luck .
@TreeFeller4Life
10 ай бұрын
Count this one as an unfortunate blessing, you saved you engine from that intake heater failure… that comes out or breaks sends that through your engine n it’s not pretty 😬
@meme2156
11 ай бұрын
Love your videos / INFORMATION! I wouldn't get wrapped around the axel over a return label since it was free. I did find the comment to you about paying customers to be a slight towards you. THAT gives insight how they feel towards their customer . That in itself tells me not to buy thier product. Another benefit of your time spent on here. Now as for parts. What do you want for actuator and cold air intake?
@EVERYTHANGDIESEL
11 ай бұрын
I'll sell the actuator for $525 shipped. It's a brand new Holset not a reman didn't even make 30days used haha the cold air intake is already sold. If interested shoot me a email everythangdiesel@gmail.com or message me on Instagram.
@thedailyproject4569
11 ай бұрын
Question? Do you have your factory grid heater hooked up. If so have you seen any issues with the killer bolt? If not how do you keep the check engine light from coming on
@EVERYTHANGDIESEL
11 ай бұрын
I do but I will be deleting it soon. I have not seen or know anyone personally who has suffered from the killer nut breaking off. In terms of keeping the check engine light off it will stay off on its own, but u can get your tuner to turn it off.
@ericjaquez4347
11 ай бұрын
Stainless diesel turbos are legit, and the 7.3 conversion is also legit. while towing my 6500lb traveler trailer here in Colorado my 04 5.9 barley see's 197.
@cbittles
11 ай бұрын
You got a 14 with dual radiator?
@EVERYTHANGDIESEL
11 ай бұрын
Yessir
@cbittles
11 ай бұрын
@EVERYTHANGDIESEL when I had my 14 it would run high 190s up to 215 220. With my 18 it bearly see 195. Winder if thr tstat is different. Diffently look into getting a lower one and maybe the fleece freeze plug thingy
@EVERYTHANGDIESEL
11 ай бұрын
I put a 180 t Stat in, I plan on doing the coolant bypass one day too
@kevincameron5823
9 ай бұрын
How much for the actuator
@DIYnService
2 ай бұрын
Consider taking legal action against Ryan for turning your truck into its guinea pig if you didn't request their free junk turbo. Ryan should be fixing your truck, not you. Next time someone sends you free equipment that could damage yours, consider having a written and signed agreement forcing them to pay for your property.
@SergioC_S117
11 ай бұрын
WCfab 2nd gen kit! Got one in my 09 and love it! Sorry about the truck, I know it sucks but gives you an excuse to try a new turbo set up $$😂
@thatgreyplatty6315
11 ай бұрын
Love my fleece cheetah in my 07 5.9 paired with 30 over ss injectors and proper tune and she's a ripper!
@EVERYTHANGDIESEL
11 ай бұрын
Hell yea, lot of people like the fleece cheetah.
@thatgreyplatty6315
11 ай бұрын
@EVERYTHANGDIESEL for sure , been watching your channel for a while man your awesome! Also thank you for your service my man!
@trsdlove5700
11 ай бұрын
I don't know how you are so calm in this video. All the years I've been watching your videos I've never seen you so disappointed in a company. This shows that you are keeping it real. Most people that receive free stuff from companies won't dare post a negative review regardless of how bad the product was. After seeing your videos running Ryans I got hyped up and bought the same setup. Now I'm worried. I personally have seen that Ryan has been all over the place regarding their specs for this turbo. On the specs it says that this turbo is great for towing and everyday driving. And when you personally talk to them they say that this turbo is a little too big for everyday towing and that it requires tuning. I want to take this turbo out like a bad tooth but currently don't have the funds. I want to put my stock turbo back in but my actuator is bad.
@EVERYTHANGDIESEL
11 ай бұрын
Long as your not dogging on it or overspeeding it, it seems like it will be fine. based off the overall comments it seems there turbos are hit and miss. Some folks are running strong others had same issue or similar like mine.
@Turbotalkin
11 ай бұрын
Idk if they do cummins stuff but KC turbo on my powerstroke is badass 4 years 100k towing its been great
@EVERYTHANGDIESEL
11 ай бұрын
I know about KC turbos they specialize mainly in the 6.0 powerstrokes and other models they are really good. Pretty sure they deal with cummins applications
@andytomblin8659
11 ай бұрын
Man, sorry. Just had a chance to watch your post. Do you still have those parts for sale. Let me know. And good luck, I'm looking forward to watching your next video. Haven't had a chance yet. Thanks, Andy T.
@EVERYTHANGDIESEL
11 ай бұрын
Everything is sold except my s475 turbo
@dccrawlers7595
11 ай бұрын
Anything good on the fleece cheetah turbos ?
@grant_6.7_5th_gen
11 ай бұрын
Hey at least you remember your subs that’s awesome! Good luck bro! Sucks that happened though!
@trevorross7509
11 ай бұрын
Are you going to check the grid heater bolt while you have it apart? Just to make sure its not broken.
@EVERYTHANGDIESEL
11 ай бұрын
I'm doing a grid heater delete. So I'll look at it when I take the old one off.
@trevorross7509
11 ай бұрын
My bad, i realised you said you was going to do the delete after i wrote the comment.
@EVERYTHANGDIESEL
11 ай бұрын
@@trevorross7509 no worries haha
@jasongriffin1127
11 ай бұрын
Wish you the best. I appreciate your content. Thanks for the details about the company you’re dealing with. No slander, just increased awareness. I’ll steer clear from them.
@jacksondaniels8169
11 ай бұрын
Dude, I had MDS Diesel in Ramona do my BD Diesel turbo install. Good so far!
@EVERYTHANGDIESEL
11 ай бұрын
Is it a bd vgt?
@jacksondaniels8169
11 ай бұрын
@@EVERYTHANGDIESEL Yes, 2016 3500 drw mega cab, luxury brown with white gold accent. I was having the typical turbo issue that plagues this Gen.
@TreeFeller4Life
10 ай бұрын
Personally I’m gonna go with a 2nd gen swap better for power, engine temp, oil temp, manifold temp, even spool up lengthens the life of head gaskets and the engine itself, gonna run the steedspeed 2nd gen manifold not sure on the turbo still deciding.
@TreeFeller4Life
10 ай бұрын
Cmon bro, I’d pay the shipping. Ryan and his dad run a TIGHT shop up there. They are great honest people. For anyone to say they are and run a bad company is lying. They should have paid for that return shipping for you but it is what it is man. It’s a free turbo at the end of the day ya know what I mean 🤷♂️ I get your frustration. If anyone else comments they are a bad company you’ve never dealt with them or purchased anything from them then because they are in the top 3 of greatest diesel power product manufacturing companies in the world.
@robertpolkamp
11 ай бұрын
Soind like sound karma. Look what you're doing to these poor trucks...
@geebroni4118
11 ай бұрын
Unfortunate man. Check the cvc filter or the housing while your at it. Looking forward to the grid heater delete as I'm about ready to tackle that one.
@bobbycakes
11 ай бұрын
Cam, that sucks! Glad nobody was hurt on the highway. Just a heads up for you. I did the heater delete a year ago. 2 weeks ago #5 injector line started to spray out. banks line #1 did it 2 months ago. so i have ordered new lines from thoroughbred diesel. i was told the crush washers after loosening them a time or two they leak. just a little insurance while your in there. glad your installing the intercooler.! Hang in there!
@EVERYTHANGDIESEL
11 ай бұрын
Thanks for the tip man! Pretty sure these injector lines have never been broken loose ever 🤣🤣 we'll see though.
@mannychico1
11 ай бұрын
This is exactly what happened to me with the kit from diesel power source (s400) I was trying to pass a slow truck when the turbo blew up. I was still under warranty ,but they tried to blame it on me so i decided to go with a 2nd gen swap kit from EvilFab
@EVERYTHANGDIESEL
11 ай бұрын
Smart move bro haha, cause that exactly what I'm doing lol
@D.M.Designs
10 ай бұрын
@@EVERYTHANGDIESELAre you getting the inline exhaust brake that uses stock in cab controls?
@jbays6125
11 ай бұрын
How much metal in the oil pan?
@EVERYTHANGDIESEL
11 ай бұрын
No metal
@rollinwiththefergs8117
11 ай бұрын
That blows After you installed that I was thinking about going with the same set up but now nope. If you end up selling that manifold let me know
@EVERYTHANGDIESEL
11 ай бұрын
Yea there's a lot better options out there and It's already sold.
@rollinwiththefergs8117
11 ай бұрын
@EVERYTHANGDIESEL what direction would you suggest if I'm wanting to keep my exhaust brakes. I was seriously considering turbo time but like you said they are still new id like to do a compound with a vgt
@EVERYTHANGDIESEL
11 ай бұрын
@@rollinwiththefergs8117 imo do a non vgt and add a bd exhaust break. I'd also recommend tater built. Seems like only company I haven't heard anything bad about
@johnnymaddox6322
11 ай бұрын
You most definitely kept a level head about everything & was real with everyone on how it happened & the products involved. If it was my turbo company Id send you a new turbo & label to ship bad back so I could run test & see what caused the failure.
@Boneheadssmokinkitchen
11 ай бұрын
Damn sorry man you kept it real and your subscribers appreciate that.
@EVERYTHANGDIESEL
11 ай бұрын
Stuff happens and that's all I can do for my subscribers. No reason to lie about stuff
@marrag1
11 ай бұрын
My ATS Aurora 4000 blew the seals twice on my truck and it was dumping white smoke everywhere and I just bought a turbo from Ryan's diesel service now i'm afraid it's gonna do that now but I don't push my truck past 20 psi.
@gregy3660
11 ай бұрын
I bought a drop in turbo from Ryan’s it’s been in the truck almost two years and have had no issues. And I wouldn’t be afraid to replace it again with a Ryan’s turbo. This was just a fluke
@marrag1
11 ай бұрын
@@gregy3660 listening to what Cam said about pushing to 45 psi and it being an electronically controlled turbo the actuator probably didn't open up the veins fast enough and the turbine shift exited the chat lol
@EVERYTHANGDIESEL
11 ай бұрын
I wouldnt be afraid to put It on. Or u can send it back and look for a turbo time usa turbo or a tater built. You'll probably be fine.
@EVERYTHANGDIESEL
11 ай бұрын
A fluke that costed money lol
@EVERYTHANGDIESEL
11 ай бұрын
Probably could've been 🤣🤣 she went bye bye 👋🏾
@domcummins4148
11 ай бұрын
You will fix it very soon. Those are things that happen in the automotive world but what's important is that you are safe. God bless you and your family 🙏
@EVERYTHANGDIESEL
11 ай бұрын
Couldn't agree more brother 💯🤙🏾
@cam_bro
11 ай бұрын
Tough break my dude. Seems like Ryan's diesel service would be eager to get that turbo back so they can do a root cause analysis and fix whatever production issue is going on. Makes for good content though and looking forward to seeing what direction you end up going with your new turbo.
@EVERYTHANGDIESEL
11 ай бұрын
Appreciate it man and yessir it does haha
@UnknownProductions0
11 ай бұрын
do you have a link to that fan conversion kit? ive noticed my truck coolant pressure gets high when im sitting at idle
@EVERYTHANGDIESEL
11 ай бұрын
www.dieselpowerproducts.com/p-20009-driven-diesel-mechanical-fan-clutch-adapter-03-17-59l-67l-dodge-cummins.aspx?gclid=CjwKCAiA6byqBhAWEiwAnGCA4DHGV93op2PPB7Nq2Xbdg1_SnrR-rUCfyQH-HIzW09eVBXLv0iXUUxoCpAYQAvD_BwE Only thing you would need to buy is a 7.3 mechanical fan clutch.
@marrag1
11 ай бұрын
Also when I was shipping my ATS turbo back to Colorado from Buffalo, NY it was gonna cost $114 cause it weighed 50lbs. Don’t know I did? I just said it weighed 20lbs and paid $44 to ship with UPS and they didn’t say anything as long as it had a label they didn’t care lol. I did everything online of course not at the UPS store.
@EVERYTHANGDIESEL
11 ай бұрын
Haha glad u mentioned that 🤣💯🤙🏾
@marrag1
11 ай бұрын
@@EVERYTHANGDIESEL yeah I thought the employee was gonna say something but they just scanned it and gave me my receipt lol
@janamaro5894
11 ай бұрын
I think EvilFab and SloshFab is highly recommend for the 2nd gen swap and compound turbo. Especially Black Market Performance has those 2nd gen swap because, they're cheap.
@EVERYTHANGDIESEL
11 ай бұрын
They both have excellent kits. It was hard to choose lol
@janamaro5894
11 ай бұрын
@@EVERYTHANGDIESELRight.
@rammer1434
11 ай бұрын
Grid heater delete install vid would be great thank you.
@herculesinwyoming
11 ай бұрын
He has one in his past videos
@EVERYTHANGDIESEL
11 ай бұрын
I have one from years ago on the channel but I'll make a newer one installing it.
@grant_6.7_5th_gen
11 ай бұрын
I know brotha .. just my opinion lol I’m glad their tunes work well with them. I have even thought about trying some of their new revisions but my new tunes are really good. lol no disrespect I just let everyone know when I hear them lol good luck oh yea happy birthday Friday and thanks for your service for Veterans Day and year round! Simper Fi !!
@EVERYTHANGDIESEL
11 ай бұрын
I know man lol u just always bring them up out the blue lol I remember your comments 🤣 and thank you I appreciate it!
@twinturbosrt6088
11 ай бұрын
Also Jake a pusher intakes is a solid dude and makes a badass high mount set up loved mine and planning on doing another one with polished housing s476
@EVERYTHANGDIESEL
11 ай бұрын
Good to know!! Pusher has a nice compound kit too
@dominicsmith3791
11 ай бұрын
Yep all that Marring with inside the turbo that’s crazy good shit ain’t cheap and I’m sure that’s not a cheap Turbo but cheap hardware are not good either to build it. Did you have to calibrate it or did they calibrate it before they sent it out to you or does calibrating revolve around a revision on the tuning?
@EVERYTHANGDIESEL
11 ай бұрын
The vgt actuator comes preprogrammed already from them. I installed a new tuned after installing the turbo
@twinturbosrt6088
11 ай бұрын
Far from stock has a really good second swap
@EVERYTHANGDIESEL
11 ай бұрын
Noted!
@theofaber6866
11 ай бұрын
Should have seen my turbo blowup. Compressor wheel was non-existent. I’m running the same exhaust manifold as you are there with a stud kit and now I have a fleece cheetah seems to be pretty good
@EVERYTHANGDIESEL
11 ай бұрын
Lmaoo shits wild man haha
@grant_6.7_5th_gen
11 ай бұрын
Fleece will buy turbos
@EVERYTHANGDIESEL
11 ай бұрын
Thanks for the info.
@johnrobinson3110
11 ай бұрын
Damn bro. I'm sorry for the shit luck. RYANS SUCK COCK. SAME ISSUE WITH THEM. They wanted it Sent back. I did, they came back and said it overspeed the turbin wheel and that's what caused it but I was doing like 45mph and wasn't even on it hard at all. Seems like that's what they say to most to get out of the warranty. They even said they would reimburse me for the shipping once they got it but they didn't once they deemed it as an overspeed. If I had the money, Dawg, I would buy the pipe off ya but I'm a disabled marine (happy Birthday to myself and anyone else out there). Don't make enough yet but I totally woukd man cause I need one. Thank you for your service too bro.
@mikeb6300
11 ай бұрын
Happy birthday 🎉 It’s my birthday as well 11/10
@EVERYTHANGDIESEL
11 ай бұрын
Happy bday man!! Sorry u had the same problem too!
@johnrobinson3110
11 ай бұрын
@EVERYTHANGDIESEL thanks man. They are some shadey businesses out there and I feel for it, same as u. I just wished I could buy those parts man. I need them lol
@doublej963
11 ай бұрын
That’s to bad buddy, hope it all comes out at the end
@EVERYTHANGDIESEL
11 ай бұрын
It's all good, the truck will be back before you know it.
@marcpiccolo19
11 ай бұрын
I feel for you brother, I have a smeding 2nd gen kit and love it, hope things turn around and I look forward to the upcoming videos, we all agree with you bro this guy should definitely cover the cost to ship considering it was his faulty product
@EVERYTHANGDIESEL
11 ай бұрын
I appreciate it bro! I wasn't making this video to bash any brand or anything. I just wanted to share my experience and what happened to my truck 🤣 smeding 2nd gen kit is a awesome kit too, I ran it on my 3rd gen for years. I still do business with Mack over at MDC DIESEL. Love those dudes. That's why I still have there promo code haha
@haroldwortman3
11 ай бұрын
I'm between MDCDiesel and Evilfab I want the looks of Evilfab but is it necessary because I'm not always popping my hood? I have a 5% discount code for the military for Evilfab just lmk. Also with the MDC diesel kit I was thinking about adding the wcfab intake on the DIY section if I wanted the look.
@EVERYTHANGDIESEL
11 ай бұрын
If you wanna save some money I'd do the MDC Diesel kit and use the my channel code "everythangdiesel" to save more on top. You can always swap out the intake horn down the road. Unless u wanna go for the bling. Then evil fab would be better. Evil Fab quoted me 3450 with military discount. I wasn't a fan that I had to use there manifold and turbo. When I asked who makes there turbos they said a private label company. After what happened to me last week I wasn't gonna put up with that again. Haha but the MDC DIESEL turbos are proven for me. I've ran several of them.
@kabouma83
11 ай бұрын
Had the same thing happen with a case tractor engine (cummins 6.7) the problem was a blown cracked piston. Engine was running fine. After the second turbo we took the head off. Rebuild done, new turbo and now 6000 ours without any problems.
@EVERYTHANGDIESEL
11 ай бұрын
Hell yea, shitty that it had a cracked piston, but glad she's solid now
@imissyoumom7644
11 ай бұрын
Are those pit vipers?
@EVERYTHANGDIESEL
11 ай бұрын
Naw haha there Neven Eyewear 😎
@imissyoumom7644
11 ай бұрын
@@EVERYTHANGDIESEL well I hate to just talk about you’re sunglasses lol but they are slick! I’m a dodge guy as well, I have a 2005 5.9. Sorry about you’re truck bro, at least you are an experienced mechanic and you can handle it 😎.
@loganbomer5136
11 ай бұрын
Stainless diesel 5 blade vgt boss
@johnnybags87
11 ай бұрын
That's what I got, had it on for a year now, still love to drive it, it's been a great turbo
@loganbomer5136
11 ай бұрын
Yes it’s probably the best whistling Cummins turbo in my opinion, especially when you go bigger charge pipes
@EVERYTHANGDIESEL
11 ай бұрын
I definitely ordered a 5 blade, but it wasn't the vgt 😎👀 #5BLADEMAFIA
@EVERYTHANGDIESEL
11 ай бұрын
They definitely sound good. And charge pipes definitely assist in it
@JFHomeServices
11 ай бұрын
I’ve got the smeding s300 2nd gen swap on a straight pipe. On my 2014 ram it’s bad ass
@EVERYTHANGDIESEL
11 ай бұрын
What size s300 you run?
@acoldcorpse8469
11 ай бұрын
@@EVERYTHANGDIESEL Same. Drop in kit from smeding for my 2012. I have had it for a year so far. 64.5 billet SXE. So far so good.
@JFHomeServices
11 ай бұрын
62mm
@gsc512
11 ай бұрын
It's gotta be amsoil. Want something more dependable get USAA 😅😂 USAA road side assistance and towing Do you have any plans to check the engine oil? Sorry about the frustration of having to deal with other people's problems. You're lucky you didn't experience diesel run away since it was able to consume its own oil and use that for combustion. I think you can use acetone. That's aluminum safe to rinse out the boost tubes and the inside of the inner cooler because the oil will kill thermal efficiency😅
@EVERYTHANGDIESEL
11 ай бұрын
I'm swapping the intercooler I showed the new one in the video. I was able to use some engine degreaser and cleaned it up like a charm! I added roadside assistance to my truck with my insurance company. Thought I had it before but didn't haha
@07redsled
11 ай бұрын
FIS s467 and a steed speed and be done
@EVERYTHANGDIESEL
11 ай бұрын
Something like that haha soon enough
@07redsled
11 ай бұрын
for real check out FIS v5 billet s467 1.0 t4 its awesome and bd makes a exhaust brake that plug and plays works better than stock by far@@EVERYTHANGDIESEL
@dcrfittrucker
11 ай бұрын
😈 Evil Fab 2 nd Gen Swap please!!!!
@EVERYTHANGDIESEL
11 ай бұрын
Perhaps 🤭
@Gilmore304
11 ай бұрын
Ok, As much as I enjoy watching “EVERYBODYS” videos on 6.7’s I am 100% convinced unless you pull motor & complete everything , grid Heater delete, turbo & injectors to match, full delete , intercooler ETC. Then prepare to spend $$ & better be back up truck is all I’m saying because no way people get 500k miles on their 6.7 Cummins factory emissions, no tune, notta, but within 100k miles these trucks are $ pits and unreliable as hell! NO WAY NO HOW I CAN TELL YOU LIKE MOST IVE SEEN IN MY MANY YEARS OF RETAILER IN OFF ROAD THAT YOULL GET TIRED OF THIS BACK N FORTH OR YOULL STAY FACTORY BECSUSE THERES NO WAY BE RELIABLE AND HAVE BIG POWER AND OR BEAT THE FEDS.
@patarmstrong3582
8 ай бұрын
Lots of shouting, but not much to say.
@AdamSchneider-n3j
11 ай бұрын
How much for the banks air intake?
@EVERYTHANGDIESEL
11 ай бұрын
It's sold already
@lucasmancini7415
11 ай бұрын
That’s pretty shitty customer service. Regardless if you didn’t pay for the turbo or not. If I bought a turbo and it blew up and they told me I had to provide shipping back to them to get a new turbo I would be pissed. That’s kinda bullshit and definitely opened my eyes up about that company. I had been under the impression they were a top notch company with top notch products and service. Needless to say I’m not quite sure now and don’t plan on buying a turbo from them anytime soon.
@EVERYTHANGDIESEL
11 ай бұрын
Apparently it normal to make customers pay to send products back to them when it's defective. That's like industry standard, idk tho. Is what it is though.
@marrag1
11 ай бұрын
ATS is making me do that twice with my turbo that blew the oil seals twice already. I wasn't going to pay $70 again to ship their piece of shit turbo back so I said the turbo weighed like 10lbs and paid $40 for a label and sent that POS back to ATS and I'll be telling them to give me back my money also cause I don't want that turbo back on my truck again.
@chris24v
11 ай бұрын
Hashtag get rid of the VGT turbos for good ryan diesel is mainly a duramax shop i would never trust a shop that professions in duramaxes lol js much love brotha 😂
@EVERYTHANGDIESEL
11 ай бұрын
Haha she gone for good now haha. Sticking to my fixed vane turbos for now on.
@jessemendez2517
11 ай бұрын
Exact same thing happend to me last year. It was a brand new fixed vane cheetah turbo from fleece. Lasted a little over one year before it exploded. Customer service could care less. And I paid retail for it😒
@Trenace3cc
11 ай бұрын
@@jessemendez2517the fleece cheetahs aren't fixed vane turbos my guy. There a variable geometry turbo
@rickeylahey2152
11 ай бұрын
@@Trenace3ccthere’s multiple cheetah models. For duramax, powerstroke, and Cummins. Some cheetahs are non vgt.
@barrettschlieker3558
11 ай бұрын
Sorry about the luck man know how you feel. Mine broke the crank 12hr from home pulling a trailer. What are you wanting for the cold air intake I could use that on my new set up. And the hot cold Side pipes if your getting ride of both?
@EVERYTHANGDIESEL
11 ай бұрын
Shit sucks, but w.e. I sold the cold air intake already, im keeping the cold side pipe but I'll sell the hot side. $150 shoot me a email at everythangdiesel@gmail.com or DM me on Instagram.
@jackief1917
11 ай бұрын
This sucks. You’d think they would want the turbo back to see what went wrong.
@EVERYTHANGDIESEL
11 ай бұрын
Did u hear what I said in the video lol
@TreeFeller4Life
10 ай бұрын
Contact Ryan asap!!! I’m sure he will look into this asap this never happens to his turbos or anything he builds and sells must be something crazy to have failed 😣 this sucks man!!!
@tylermeyers5477
Ай бұрын
He is known for turbos coming apart he can’t build a quality product and has the biggest piss poor customer service. He does not stand behind any of his work from his turbos to his trans builds
@lucasmancini7415
11 ай бұрын
Can’t wait to see your 2nd gen kit. That’s the route I want to go and really need to see a good install video. Theirs a couple out there but nothing real informative. You make great install videos so im really hoping that 2nd gen video will be top notch.
@EVERYTHANGDIESEL
11 ай бұрын
My buddy Okc_6.7 has a few good videos installing them and Greg A. But I will be making an install per the usual haha I'm excited too!
@timothyfrye5535
11 ай бұрын
Well his company will have a bad name for that turbo
@mikeb6300
11 ай бұрын
Sorry to hear about your truck Go with 2nd Gen swap Happy Birthday 🎉🎂 USMC SEMPER FI
@EVERYTHANGDIESEL
11 ай бұрын
2nd gen swap loading.... appreciate it man! Semper Fi!!!
@heywatsup671
11 ай бұрын
40psi on a 64mm is kinda pushing it… I would think
@marrag1
11 ай бұрын
Yeah I said the same thing and also he has a stock actuator not a modified one. It might have not opened the veins fast enough and sent all the exhaust gas pressure and his EGTs must be through the roof also.
@EVERYTHANGDIESEL
11 ай бұрын
I dont feel so, especially if it was rated to 650hp
@MrBrewner
11 ай бұрын
That really sucks. I don't think I'd be as easy going as you are. Lol. I've been looking for a catless down pipe with the 3 bolt flange. Can you point me in a direction? And happy Veterans day brother. Thankyou for your service!
@EVERYTHANGDIESEL
11 ай бұрын
Appreciate it man thank you! And idk where u could find that. What application is that for?
@Cumminsmcgee
11 ай бұрын
Sorry about the service your getting guess your not as cool as truck master loljk Would love to see a compound set up. Mine is just stock for now:)
@EVERYTHANGDIESEL
11 ай бұрын
Lmaoo it is what is, I'm on to the next thing!
@mbdiesel
11 ай бұрын
Stealth turbo or second gen swap! 💪🏻
@EVERYTHANGDIESEL
11 ай бұрын
2nd gen swap all day!! Never will run a vgt again
@justinguerra5820
11 ай бұрын
So sorry Cam you right bro S**t happens but that is crazy! Awful. Thank God you were safe. Sucks you would think RDS would want to make it right...? I mean they growing in the industry doing good things, but customer service like that? With their name on it and on youtube...i just don't think that's wise on them. To not just make it right.
@EVERYTHANGDIESEL
11 ай бұрын
Yea it is what it is.
@code10garage94
11 ай бұрын
Daaammnnn!!..Bum deals from Ryan👎🏽…I am curious if he’s going to get back to you after this video…looking forward to the 2gen swap anyway👍🏽…Aloha 🤙🏽
@EVERYTHANGDIESEL
11 ай бұрын
Idk, probably not. I'm not to worried about them. Gonna move on to get the truck back on the road
@Steadierpark
11 ай бұрын
I would think rds would want to work with you to get good advertising since they’ve gone this far already giving you a free turbo. Now it just cost you time and money and them a bad name. I def won’t be buying s*** from Ryan’s. Does the company you got the 2nd gen swap from make 5th gen 2nd gen swap kits too?
@EVERYTHANGDIESEL
11 ай бұрын
Tbh I'm not sure if he does but you can message him and ask. I feel like he would. Pointzero_fab
@herculesinwyoming
11 ай бұрын
Breakdowns really suck.
@EVERYTHANGDIESEL
11 ай бұрын
Yes it does haha
@1005dragrcr
11 ай бұрын
Nowadays seems like all aftermarket parts are junk.
@EVERYTHANGDIESEL
11 ай бұрын
Seems like sometimes 🤣
@miguelparra3081
11 ай бұрын
💪💪💪💪💪💪💪💯💯💯💯💯💯
@EVERYTHANGDIESEL
11 ай бұрын
💯🤙🏾🤙🏾
@grant_6.7_5th_gen
11 ай бұрын
Good thing you have the smending set up. Lose the CCS tuning bro I’m telling you they are trash! That’s why they have revisions every other day
@EVERYTHANGDIESEL
11 ай бұрын
Yea it is haha! I know u got your feelings about them but my truck runs fine bro. No need to mess with something if it isn't broke.
@Trenace3cc
11 ай бұрын
I haven't had a revision for a year and mine runs strong with ccs. 100c lower egts overall compared to another local alberta tuning company
@EVERYTHANGDIESEL
11 ай бұрын
@@Trenace3cc hell yeah
@jeffbrown8974
11 ай бұрын
Too cheap to pay for shipping, I'm out on this channel.
@alanbagel2204
11 ай бұрын
By Felicia
@Steadierpark
11 ай бұрын
Their junk turbo cost time, labor, stress and money on his part. If I were Ryan’s, I’d send not only a return label but a replacement turbo.
@EVERYTHANGDIESEL
11 ай бұрын
If you wanna look at it like that then dueces ✌🏾😂 ignorance is a bliss.
@EVERYTHANGDIESEL
11 ай бұрын
Thank you lol
@DPats1228
11 ай бұрын
We don’t need this negativity around here! Peace ✌️
@mjp5318
11 ай бұрын
Sorry to hear about the truck . I am not sure I would of handled it this way... I mean really they sponsored you for positive publicity - and you came right out and bashed them over a label, versus a free turbo .. Sure you are out on a bit of money, but Ryans is out 1 turbo $1000+, plus now bad publicity, and you gave them 4 days to handle the situation, what if they are back logged with work ? I don't know .. If any vendors start watching all this , they are not going to be so eager to work with you, they don't want to be put on blast for you getting free stuff complaining about a label and calling their stuff p.o.s and scrap . This is one of those moments you should of gave the shop props for hooking you up, and willing to diagnose the problem, what if you were over spooling ? Wouldn't want them to know the truth and send it back, instead just bash them and their business practice . Too much drive pressure caused by to much fuel. Spins the shaft too fast, which wipes the oil film off the shaft and journal bearings. Shaft gets hot and breaks, that is if the turbine or comp wheel don't scatter first. I would seriously think about this video and correct this, before blowing them up with calling their stuff shit .
@EVERYTHANGDIESEL
11 ай бұрын
I didnt bash them or anything. I literally was 100% transparent, there is a huge difference between those two. I could've easily came on here and said don't buy from them or they are horrible but I didn't cause they have a business and mouths to feed as well. All I did was explained what happened and my experience. I'm guessing your one of those people that says someone is messed up when they are being honest about something. You rather hear something that pleases your ears versus what you want to hear. I give my experience and tell my story so others know what happened. Thousands of people watch my channel for my recommendations and opinion. I'm not gonna have people wasting there hard earned money if this is the outcome. Based off the comment section I am not the only one who went through with this and it's not only Ryan turbo other companies seem to have the same issue. This brings awareness so individuals are informed and not ignorant to the matter unlike some. There's a bigger picture to this video, and "bashing" a company was the last thing on my mind when making this video. Never once did I say don't buy from them in this video or stay away from them.
@mjp5318
11 ай бұрын
@@EVERYTHANGDIESEL hey dont take it personally man , you asked for feed back regarding the video, Im not attacking you , giving you the feedback from an outside looking in perspective . You didn't say don't buy from them, but you did say even if they sent you another one you wouldnt want it or use it , but saying its junk, and saying they are not going to handle the situation, is no different, I mean if You were watching a vid someone put out, talking about " they wont handle the break down or failure and respond back to me " would you still go buy from them ? As I said, you asked for feed back , and I am not being a dick about it , but you automatically assumed it was the turbos fault, and you called their stuff junk, and saying they wont respond, or send you a label, for something you got for free.. really take a look at it from a viewers perspective. Your tune might have been over fueling the turbo causing over spooling, and if you are making 30-40lbs of boost at half throttle like you stated .. isn't that a little excessive for only half the pedal ? that wouldn't even engage the passing gear in the transmission at half throttle. As I said , I enjoy your content, but this video kinda bothers me, as a man like you who solves issues and looks for the cause of things and wants the best for his ride , you just put it out there , it was the turbo's fault and the Ryans wont do anything to address it.
@EVERYTHANGDIESEL
11 ай бұрын
Cool, I didn't take it personal I was just giving my personal opinion and thought behind it. How can a passing gear not be used if your already In that gear driving? If you have to give more than 60% throttle to pass someone on the highway unloaded then probably need a better tune.
@EVERYTHANGDIESEL
11 ай бұрын
So essentially your going off implied thoughts not what im actually saying lol. People will receive that how they want too. It is what it is
@tylermeyers5477
Ай бұрын
@@EVERYTHANGDIESELthere stuff is shit he is known across the board for turbos coming apart. Ryan’s is the biggest joke of a aftermarket turbo company to be around. If he was to send that turbo back Ryan would have said yeah it’s your fault so long buddy without any explanation of why he thinks that. Ryan does not stand behind his product and he can never do no wrong. I was a paying customer and when he did something wrong and I said can we fix this he told me it was my problem not his. Even tho it was his product that was not built correctly.( had not even put it in the truck just took it out of the box) I drove to his shop as I am not super far from him and he still didn’t want to fix it. He gave me my old Turbo back and said see ya. RDS fucking sucks
Пікірлер