I started my pedal journey with the GT-10 and couldn't figure it out. This video really speaks to me!
@joelwilson7908
2 жыл бұрын
Hey Jonathan, it's great to hear that it wasn't just me that struggled! And im glad you enjoyed the video, mate! Thanks for the support 🤙
@nedward5871
Жыл бұрын
Nice. Could move the Morning Glory up above sideways and then have a momentary switch to be able to switch its secondary function live, but otherwise like the pared down approach. Waiting for a used Solo 18 to build a 2nd smaller pedalboard with less options. Sometimes less is more...
@natasaragih9970
2 жыл бұрын
I love your contents man. Your channel surely will need more exposure!
@joelwilson7908
2 жыл бұрын
Hey mate, thanks very much! Glad you're enjoying the content and thanks for the support 🤙
@stuminnis4050
Жыл бұрын
This is very similar to my board, though I’m sold on DSP drives. Source Audio Kingmaker fuzz > Strymon Sunset dual drive > JHS 3 Series harmonic tremolo > Walrus Arp-87 delay > MXR reverb on a Pedal Train Nano+ with a Cioks Sol power supply. It’s a remarkably flexible setup for only five pedals on a very small board.
@noah_the_nerd
Жыл бұрын
I haven't subbed to many guitar-focused channels yet, but you've got potential! Keep it up!
@PeteJake100
2 жыл бұрын
Nice Board. I use a temple audio board as well. I just got the Morning Glory and I'm still figuring out its best setting. So far I prefer my Tumnus, but I'm still experimenting with the MG by itself and stacking both together.
@joelwilson7908
2 жыл бұрын
Hey Pete, that's awesome, mate! What other pedals are you rocking on your board? Not sure if you've passed it but I'd recommend checking out Josh Scott's stacking combination for the MG and a Klon-clone - it's the drive tone he swears by and may be what you're looking for. kzitem.info/news/bejne/kWuAm22uaqyLiXY Cheers mate! 🤙
@PeteJake100
2 жыл бұрын
@@joelwilson7908 Thanks for the video suggestion! Currently running three reverbs. I just got the Strymon big sky so maybe I’ll find a sound in the BS to replace my Walrus SLO or my Afterneath. I also have theJHS Muffaletta, Cali 76 and Digitech Obscura delay on my board.
@joelwilson7908
2 жыл бұрын
@Pete Creswell no problems! Hope it helps 🤙 And that sounds like an awesome rig. I've been wanting to try a Cali 76 (or anything else from Origin) for a while but haven't been able to find any around where I am. Hopefully sometime soon, though! Cheers mate 🤙
@sixxbrisbane
Жыл бұрын
If this dude is ever on Gold Coast I’m paying whatever it takes for a lesson
@reubentrapp
Жыл бұрын
1:46 sounds like ur cat needs help 😂
@MattD86
Жыл бұрын
Such a great channel. Thanks for the awesome videos! Interesting way to utilize that FZ-1W. Super versatile
@MattD86
Жыл бұрын
Just realized you’ve kinda quit making videos…make a comeback!
@garrettsodroskymusic
Жыл бұрын
Nice video! I love hearing how people think about their smaller rigs. I tend to take a similar approach, but maybe just a bit more expansive. On my board right now I have a Polytune 3 Mini (buffer on), Sentry gate (noise problem solver), Keeley Compressor+ (subtle always-on), Horizon Devices Precision Drive (tightening the low end on higher gain tones), Wampler Pantheon (edge of breakup mainly, but capable of everything from clean boost to higher gain) - then the wet section is a Walrus Julianna (light chorus/vibrato when I want), Horizon Devices Flux Echo (three delay/reverb combo options with tap tempo), and Neunaber Immerse MkII (dedicated multi-reverb). Total of 8 pedals on a Temple Audio Duo 17 board. Super versatile and still pretty compact! Might get a more dedicated delay soon, but really loving how it came together.
@truthfactreality6814
Жыл бұрын
A GIGRIG gen x 14 for power would be great on this. And maybe an atom switcher for tone integrity. Also a couple of mini pedals in place of the tuner and maybe another pedal. Ps. I just got the boss fz1 fuzz. What an amazing pedal!
@fistovuzi
5 ай бұрын
5 overdrive pedals on one board is fine if it's a small board. i have favourites in every pedal category, time-based modulation i only use reverb and some delay on occasion, a boss distortion and boss metal core that recently got removed for a fuzz pedal (i've always hated fuzz but i recently discovered 'trons, so i will find the fuzz i like). the rest is really a rotating mess of ODs.
@mikem668
Жыл бұрын
My pedalboard is a guitar case on top of another guitar case sitting on the arms of a chair so I can see the settings. My guy at Sweetwater likes the way your board mounts the pedals. Did you ever consider putting painters tape on the pedals before fixing them to the brackets? He suggested it, since I don't play gigs and am still exploring lots of options. I'd prefer a system that's easy to reverse.
@alexymorozov
Жыл бұрын
Great video !!!
@grmelectric6826
2 жыл бұрын
Awesome video, great content. I am really wanting a morning glory. I currently use a blues driver for that slight break up spot. Do you think there would be much of a difference in the morning glory?
@joelwilson7908
2 жыл бұрын
Hey Grant, thanks mate! Really glad you’re enjoying the channel. I’ve personally found that the differences between the MG/BD are quite subtle, both of them doing very similar things just with a slight difference in character (The MG maybe have more of a mid-frequency push?) I think if you enjoy the BD but you’re looking to try something new (but not too different), you definitely won’t be disappointed with the MG. Cheers mate, hope this helps!
@musicmaestro88
6 ай бұрын
Was hoping you'd turn on the Fathom's secret delay mode.
@chrismikan2631
2 жыл бұрын
Cool board. What made you decide to ditch the Benson preamp?
@joelwilson7908
2 жыл бұрын
Hey Chris, mostly it was because I preferred the way the Morning Glory interacted with the overall rig. Also, the convenience and versatility of the second drive stage on the MG to use as a post-drive boost. Would love to work the Benson in in future but for now I find this is the best overall build for tone and versatility 🤟 Cheers mate! 🤙
@yukitillis7784
11 ай бұрын
Nice setup! How easily did you find attaching your boss pedal with the rubber bottom? Did you try to get a smaller plate? Thanks ;)
@fistovuzi
5 ай бұрын
i havent watched the vid yet, but since the 80s the trick has been, unscrew the base plate and screw it back on upside down with the rubber face inside the pedal and a steel surface facing out.
@hankbullard701
2 жыл бұрын
Sounds great! Are you using a noise gate pedal for live gigs?
@joelwilson7908
2 жыл бұрын
Hey Hank, cheers mate! And I've never really found I've needed a noise gate for live gigs - single-coils hum doesn't bother me too much and when I have the fuzz way up I can usually control it some with the volume pot. Although, I haven't used this exact board and set-up for a live gig yet so maybe that'll change! Cheers mate 🤙
@user-rw4qm2se6g
Жыл бұрын
may I ask what the last song name is. I beleave it is 80s. Thank you in advance for your help.
@gae7081
11 ай бұрын
Everytime i struggle with volumes setting and stacking gain pedale..😢
@salvatorevitale9165
4 ай бұрын
Ok, but what amp do you use?
@jrdhrpr
2 жыл бұрын
My ultimate pedalboard…. for now
@joelwilson7908
2 жыл бұрын
Exactly right, mate! I'll see you in a few weeks when I'll most likely have changed everything again 😂
@chrisact9601
2 жыл бұрын
Good on ya, Joel. You're making some excellent videos, mate. Although ... you make your best decisions when you're decisive? kzitem.info/news/bejne/t3yAsaCAgZSdZoo Heh ... OK.
@joelwilson7908
2 жыл бұрын
Cheers Chris, really glad you're enjoying the videos and thanks for the support 🤙 And yeah, in hindsight my wording there is probably a little confusing 😅 but I hope the meaning is clear! Cheers mate 🤙
Пікірлер: 39