If interested in purchasing this part, visit our Amazon affiliate link below. amzn.to/3cjEqCY 😎👍🔧🔩
@DIYwithMichaelBorders
3 жыл бұрын
@Leland Saint 😎👍🔧🔩
@maddenhuxley2390
3 жыл бұрын
Sorry to be off topic but does someone know of a method to get back into an instagram account?? I stupidly lost the password. I appreciate any assistance you can offer me!
@orionmalik3120
3 жыл бұрын
@Madden Huxley Instablaster ;)
@maddenhuxley2390
3 жыл бұрын
@Orion Malik Thanks for your reply. I found the site on google and Im in the hacking process now. Takes a while so I will get back to you later with my results.
@maddenhuxley2390
3 жыл бұрын
@Orion Malik it did the trick and I actually got access to my account again. I'm so happy:D Thank you so much, you saved my ass !
@lynl8897
3 ай бұрын
Thank you so much for this video. My 25 year old Whirlpool quit when it was time to Rinse and I searched that problem and your video came up. That was exactly the problem. Ordered the new $100 timer control and just installed it and it's working perfectly! I really appreciate your taking the time to film this. June of 2024
@christinabrigham531
3 жыл бұрын
Replacing the timer is certainly an option, but so it fixing the problem with the timer. The timer can be opened up and then just clean the contacts. Inside the 'timer' (which is really a motorized switch) is just a clock motor and an assembly of leaf springs. The contacts get burnt from all the Off/On activity. An emery board or sandpaper will work if you don't have the proper contact cleaning tool. Once a washer/dryer is ~8+ years old, new parts become hard to come by. We just fixed our own timer this evening. $230 for a New timer, problem though is that the normal appliance stores say the part is not available. 4 used ones on eBay $50 - $120 and 1 old, NIB timer for $230!?. Husband and I fixed ours in about two+ hours. This video is just fine but if the timer Motor is still working, there is no need to replace the timer assembly, just open it up and clean the contacts. What do you have to lose? Enjoy!
@dontcallmebrave
2 жыл бұрын
Thank you so much, I'm 90% sure you're on the right track for my machine, it just quit working mid cycle. Every position works except for the final rinse/spin. Well I guess I know what my next project is! 🙃
@dontcallmebrave
2 жыл бұрын
If anyone happens to find this, before you pull your timer out check if your lid switch is clicking. Found another video about replacing it so I decided to check mine and nope no click, luckily a screwdriver shoved in the hole did make it click and let me finish this load. Bonus new switches are $20 instead of $200+ for a used timer.
@23goatnuttz
2 жыл бұрын
@@dontcallmebrave thats crazy ty this was my problem.
@moniquehebert178
2 жыл бұрын
Will do that!! Thanks
@johnciulla2581
Жыл бұрын
I have a compact washer with buttons and the time is on a screen, but, my machine drains first time and not second time I can get it to finally drain by blowing in rinse hose. I already installed a new pump. Any ideas please..
@gannbob4357
5 жыл бұрын
Thanks Mike B. I was excited that this is almost identical to my washing machine. Then you brought out the REPLACEMENT part. I wanted a home fix...which is what I got; but, let me describe my problem more. Like you, my machine did not go into the rinse or spin cycles; but, the timer DID continue until the next space on the dial, I followed your instructions to take off the timer dial. I used a can of compressed air to spray it out a little in the holes on the back and beneath the the dial. I reattached the ground wire to the metal part of the cover and plugged it back in. I set the dial on "spin" and popped out the knob. It immediately went into the spin cycle. Thank you for the helpful video. I hope this helps others as well.
@DIYwithMichaelBorders
5 жыл бұрын
Gann Bob Awesome Awesome & we love reading comments like yours. We are happy to hear the video helped & you got your washer running correctly again. We really enjoy making these helpful videos for our fellow DIY’ers. Your info is great & will definitely help future viewers. You Rock! 😀 Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@kumarbhatia6566
2 жыл бұрын
Thanks for your comments and of course this video. The replacement timers are quite expensive for such an old mechanical style of unit. The cleaning of the timer with compressed air sounds like a plan and very likely the fault of our Inglis. Now twice, the timer stops without draining the drum. Works after manually starting it again where it was last. Appreciate the advice. Thanks.
@conniesimila6813
5 жыл бұрын
I 'fixed' my LG front loading washer which was stuck on rinse and wouldn't drain and move on to spin cycle. Unplug the washer. On this particular washer there is a small panel on the front lower left. You have to pop it open with a butter knife. Inside is a small black plastic plug on the left and what looks like a larger black plastic dial on the right. These are filters that probably need to be dealt with. Be prepared with towels and a bucket or large bowl since the washer is full of water. First the small black plug and pull it out gently. It is attached to a flexible tube. Point it a your bowl or bucket, remove the black cap and let the water drain. There will probably be some sand or guck. This is slow, so once it drains clear you can plug it back up, push back in place and deal with the filter on the right. But you might want to the water in the washer come out this slow way because when you begin to remove the filter on the right side the water in the washer will gush out. It's much easier to deal with if your washer is on a pedestal with a drawer underneath so you can position a bowl to catch the water. So remove the filter on the right side. In my case it was clogged with two bobby pins, a whole cloth napkin (that I hadn't seen in years) and a whole lot of lint. Put it back together. That did the trick for me. Side note: another fix - if LG washer shows error code LE - unplug, wait 90 seconds. Rotate drum manually to left 4 times then manually to the right 4 times. Plug back in. This resets something and has worked for dozens of people.
@DIYwithMichaelBorders
5 жыл бұрын
Connie Simila Awesome Awesome & we absolutely love your info Connie! That is great helpful info for all of us! You Rock! 😀 We are happy to see you accomplished your DIY project. Definitely keep us posted on questions. Again, that was extremely nice of you to share your comment. This will be very helpful to many! Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@amyreid937
6 жыл бұрын
Thank you so much for this video -- you gave a clear explanation & I was able to fix the machine & get on with my weekend (and all those loads of kids' laundry)
@DIYwithMichaelBorders
6 жыл бұрын
Amy Reid Awesome Awesome thanks for checking out the video and sharing your comment Amy! We are so glad to hear the video helped...& hopefully saved you some money and stress. Let us know if you have any additional questions along the way we are here to help. Please subscribe to the channel and turn on your KZitem Notification Bell that would be awesome thanks again Amy! 😎👍🔧🔩 Also below is a link to our Appliance/Home Repair Video PlayList. It has several more repair videos on your washer as well as many more helpful videos around the house. Definitely check those out!
@skuuterdog
6 жыл бұрын
I watched this video and thought I had a bad timer or water inlet valve. After some checking it turns out I had a bad FloodSafe hose from the cold waterside. When it went to rinse it received no cold water and just sat there. Luckily the fix was inexpensive and this video did help me to eliminate the items that were working fine. -jz
@DIYwithMichaelBorders
6 жыл бұрын
Bitter Clinger Thanks for checking out the video and sharing your experience. We appreciate you taking the time to reach out to us. Glad to hear you’re back up & running. Let us know if you have any additional questions along the way! Please subscribe to the channel and turn on your KZitem notifications that would be awesome thanks again 😎👍
@drliz6783
2 жыл бұрын
I have the same exact problem. May I ask how you fixed it? I changed the hoses and that didn't fix the issue.
@yogagaia
5 жыл бұрын
Thankyou this was very helpful especially since I just had this exact problem happen to my washer today and I was already thinking I needed to buy another washer but now Im just going to order a new timer! Great service!
@DIYwithMichaelBorders
5 жыл бұрын
nancy ivey Awesome Awesome & thanks for watching. Keep us posted on your DIY project. Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@looksgoodtous
3 жыл бұрын
I knew my experience custom building my PCs would come in handy ;) I just have to figure out if it's really the timer but that's my gut after watching/reading the comments. Will let ya know if I can figure it out without buying new stuff (because really, I'd probably buy both a new washer/dryer but didn't plan that on doing that yet).
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. Definitely keep us posted on your project, us fellow DIY’ers need to stick together! 😎👍🔧🔩
@Charlotte_Photographer
6 жыл бұрын
Good video, but in my case it ended up being the lid switch. The plastic broke at the screw holes and the washer thought the lid was open. Had I bought the timer it was $87... Lid switch only $10!!! #Winning
@DIYwithMichaelBorders
6 жыл бұрын
Lenn Long Awesome Awesome! That’s great to hear! We love hearing experiences like this! Saving money is great 😀 Just Incase you need any further help, we have listed our “Lid Switch Repair” Video. kzitem.info/news/bejne/kp6KuJdjmIKfg20 Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@babulthegreat4834
5 жыл бұрын
Thank you for posting this comment. Mine was totally the lid switch.
@taromcbarako7210
3 жыл бұрын
I love the epic intro then how it cuts into you in the laundry room. I think I watched that part three times. Also, thank you for this DIY!
@DIYwithMichaelBorders
3 жыл бұрын
That’s great to hear. 🤣 Welcome to the DIY Raptor Club. Us fellow DIY’ers need to stick together! 😎👍🔧🔩
@petermaz701
4 жыл бұрын
Very clearly explained.
@DIYwithMichaelBorders
4 жыл бұрын
petermazbabie Thanks for sharing that & we appreciate it. Let us know if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩
@soupflood
4 жыл бұрын
This will definitely work, however the new timer costs one third of the second-hand washing machine price.
@DIYwithMichaelBorders
4 жыл бұрын
soupflood It sure does unfortunately. 😳 Some people elect in purchasing a brand new machine as opposed to replacing the timer but it’s all personal preference. Please subscribe to the channel and ring your KZitem bell 🔔 this Will be very helpful to us thanks again. 😎👍🔧🔩
@billybobbobson5346
4 жыл бұрын
So go buy a used washing machine if that falls inline with your “budget.”
@sweetpea8107
7 жыл бұрын
Thank you for showing me that now I can use my washing machine
@DIYwithMichaelBorders
7 жыл бұрын
Very cool thanks for the update!
@ChickieK8T
4 жыл бұрын
Thanks for your video. I think this is what is wrong with ours. It clicks but doesn't move on in the cycle so you are stuck with clothes that still have soap on it and water that won't drain
@DIYwithMichaelBorders
4 жыл бұрын
KT Thanks for watching. Keep us posted. Us fellow DIY’ers need to stick together. Please subscribe to the channel and Ring your KZitem Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@Supremebeinglivingmybestlife
2 жыл бұрын
I have this exact washer and it stop at the rinse cycle . I'm actually interested in doing this for a living like fix and resell cause they throw them out alot in Florida. So maybe this is faith telling me go for it I like your video and you have anew sub. Thanks 😊
@DIYwithMichaelBorders
2 жыл бұрын
We really appreciate that and thank you for watching and sharing this. If you do go forward with the DIY project, let us know if we can help in any way. Us DIYers need to stick together!
@shadowpoet4398
5 жыл бұрын
heyo . My washer is an Edison by Whirlpool model SM 8525147-A, and it would do this thing where it would start in the fill up cycle, do an agitation cycle, then it would drain and then start to rinse, but at that point it would just keep filling and filling and filling and draining all the water through. I would also hear a grinding buzzing like plastic gears grinding coming from the timer knob. That's what told me that my timer was broken. Well, that and if I advanced it one or two clicks it would resume the wash cycle as if nothing happened. After searching hopelessly online and coming up dry on the model number I got frustrated and undid the side screws and opened the control panel, and I saw the timer model number 8542050. I went to the internet and entered the number, 8542050 and BLAM! Pages of listings for the timer! I WAS SO HAPPY!!!! So, don't make my mistakes, folks: If you can't find the parts for the model number, LOOK AT THE NUMBER ON THE PART ITSELF. That'll get you there 10 times outta 10. Also, knowing that I can crack my machine open and fix it myself is a very empowering experience. I recommend everyone tinker with their machines as long as they have down the basic fundamentals of appliance repair. You'll learn a lot! Oh, and @DIY With Michael Borders, you don't need to undo the 1/4" screws holding the plastic straps. They're there to hold the control plate and let it fold up and back to expose all the wiring and tubes at once. I learned that as I was pulling her apart. Happy Tinkering!
@DIYwithMichaelBorders
5 жыл бұрын
Preston Scott Awesome Awesome & thanks for sharing your experience Preston. This is great info & will be helpful for future viewers. 😀 We really enjoy making these helpful videos for our fellow DIY’ers. Let us know if you have any questions. Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@bobmcdonald2905
6 жыл бұрын
It's been my experience that a defefective lid switch or loose lid screws are the most common causes. The timer won't advance if the lid switch isn't closed. Very seldom would be a timer problem be the cause of this problem.
@DIYwithMichaelBorders
6 жыл бұрын
Bob McDonald Thanks for checking out the video Bob! In our case, the poor Timer called it quits 😲. After replacing Timer, Washing Machine was back up & running. The Lid Switch is also a very common cause as you mentioned. You’re spot on! Please subscribe to the channel and turn on your KZitem notification Bell that would be awesome thanks again! 😎👍🔧🔩
@RD-xh9ss
4 жыл бұрын
Appreciate the insight. Check lid switch 1st! Thx and appreciate the insight
@caciocavalloster
3 жыл бұрын
@@RD-xh9ss anything I should check after the lid switch before replacing the timer? Anyway to bypass the timer to make sure it’s the problem?
@ltcolsin2025
4 жыл бұрын
Thank you so very much, and my wife says thank you for allowing us`to save on a new purchase.
@livenfree
3 жыл бұрын
Our washer stops about once every couple months at the end of the wash cycle. After turning the knob, open and close the lid.. About 20 to 30 minutes later it starts running again and finishes the cycle. And is good for another few weeks
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for watching & sharing this. It sounds like you have your machine figured out. That machine can’t pull any fast ones on you. 😁 Let us know if you have any questions, us fellow DIY’ers need to stick together! Hopefully many stress free days ahead for you. 😎👍🔧🔩
@frfr5525
2 жыл бұрын
Excellent video. My 18 year old Fridgeraire suddenly stopped draining and spinning. On the regular cycle it stops at a point, then doesn't progress through the cycle. I think it is not draining and when it stops at a particular point- it makes this noise, as if it's trying to move onto the next part of the cycle which comes from close to the timer area. If I move the timer a bit ahead, it continues to agitate but it still never spins. I have tried the other delicate cycle and there, it goes through the cycle but never spins at all. The knob will move from start to end without spinning - all it does it agitate. You can hear it want to do something and you hear some clicks but it won't spin. At the end of the wash, there is always a lot of water left - I am not sure if it is partly draining though since the water is about 6 inches deep always - to the same level at the end of the cycle each time. It must be partly draining since I expect if it didn't drain there would be more water? Any help in the comments from anyone would be appreciated!
@DIYwithMichaelBorders
2 жыл бұрын
Good morning, we are drinking our morning coffee answering any and all questions for the DIY community. Your symptoms are definitely in-line with a faulty Timer however, also in-line with a faulty Lid Switch. Our recommendation is to replace the Lid Switch first as it’s a more price friendly part. Below is a link to our video showing replacement of Lid Switch. kzitem.info/news/bejne/kp6KuJdjmIKfg20 If replacing this part does not fix issue, it is time to replace your Timer. You may want to purchase both parts so you have the Timer handy if the Lid Switch replacement doesn’t fix issue. If Lid Switch fixes issue, you can return Timer...or you can replace both parts at the same time. New parts are always a great asset to the continued life of the unit. Please keep us posted, we are looking forward to hearing back from you. We DIYers need to stick together!!!!! 😎👍
@AtheneNike1
2 жыл бұрын
@@DIYwithMichaelBorders Thankyou so much for your reply..but my washer is a front load washer so will it still be something similar to the lid switch for front loaders? I did a lot of research for my model and is the lid switch the same as "washer door lock and switch assembly?
@DIYwithMichaelBorders
2 жыл бұрын
@@AtheneNike1 Thanks for the reply, with front load, it’s possible that your door lock mechanism is faulty. This can be figured out by listening to the door lock mechanism after starting the cycle. If you hear the door lock mechanism make a clicking sound after the cycle starts, it is locking door & working as designed.
@peterfranciswc
5 жыл бұрын
Great video - both this and the one on the lid switch. My question is, how to determine if it's the lid switch or the timer that needs replacing? If it helps, I have a KitchenAid washer, model KAWS850LQ1. Mine stops at rinse, but if I manually advance the timer knob about 1/8" it will often (but not always) finish the cycle. Thanks.
@DIYwithMichaelBorders
5 жыл бұрын
Branton Lachman Hey Branton, thanks for checking out the video. Great question & the symptoms led us to the lid switch first...I tested the lid switch and found that to work as it should. This then led me to the timer. After replacing the timer, problem solved. Try your lid switch first...there are a few videos out there that will show you how to test it. Below is a link to our lid switch replacement. Please Subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again 😀👍 Definitely keep us posted with your DIY project, we are here to help! kzitem.info/news/bejne/kp6KuJdjmIKfg20
@otafamfarm
4 жыл бұрын
@@DIYwithMichaelBorders Aloha guys Ive replaced both the lid switch and the timer on my 80 series and still the washer stops after filling the rinse mode. If I advance the timer manually it finishes the cycle if not the timer eventually times out sometimes draining the rinse water but wont spin.
@DIYwithMichaelBorders
4 жыл бұрын
FlyFishingMolokai Thanks for watching, have you verified your drain hose is clean and clear not allowing any blockage of drain water. Also, how is your water pressure coming into the washer? Is the water coming into your washer the same pressure or speed it was the day you purchased washer... or has it slowed down? Your screens inside water valve may be clogged. If you clean your screens, which are right inside where are your Hot and cold water lines connect to the washer are...& it doesn’t fix the problem, you will need to replace your water valve. Below is a link to our step-by-step video that shows replacement of valve. Let’s get this figured out together! kzitem.info/news/bejne/pZ-GrI6JhptzoW0 Please subscribe to the channel and Ring your KZitem Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@gerhardotto2270
4 жыл бұрын
Bridge the lid switch and test. If problem goes away, replace lid switch. If not, there is some other problem. Remember to remove the bridge!
@peterfranciswc
4 жыл бұрын
@@gerhardotto2270 Great tip. Thanks!
@andreagrogan3370
3 жыл бұрын
Great video. Mine sounds like it’s going through the cycles like you can hear the timer clicking...so then it isn’t the timer is it?
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for checking out the video. The symptoms led us to the lid switch first...we tested the lid switch and found that to work as it should. After replacing the timer, problem solved. Try testing your lid switch first...there are a few videos out there that will show you how to test it. Below is a link to our lid switch replacement video. kzitem.info/news/bejne/kp6KuJdjmIKfg20 Please Subscribe to the channel and ring your KZitem bell 🔔 this will be helpful to us thanks again. 😎👍🔧🔩
@tabiewade5578
4 жыл бұрын
Well this video is younger than my new washing machine but this is the exact problem. I have done the diagnostic cycle and the calibration cycle and this is more descriptive of my problem than anything else I have done to figure out this washing machine .. good thing it was free. 2020 is killing me! ☹️
@DIYwithMichaelBorders
4 жыл бұрын
Tabie Wade Thanks for checking out the video. The Timer controls the “Cycle Flow” and continues to move the cycle through the steps. As the internal parts of the Timer begins to wear out...you see the washer stopping at either “Drain or Spin”... The Lid Switch also is a key part in the cycle...once you lower the Lid/door...you will hear a click. This click secures the electrical current and sends message to Timer to begin the Cycle. Also...once the cycle gets to the spin portion, the timer re-communicates with the lid switch to verify that the lid is closed for safety purposes...example: you do not want the washer to be spinning with a lid open...water will fly everywhere 😱 I recommend purchasing both the timer and the lid switch as they work together to move the washer through the cycle. To order parts, Go to: repairclinic.com Keep me posted! Please subscribe to the channel and ring your KZitem bell 🔔. 😎👍
@tabiewade5578
4 жыл бұрын
@@DIYwithMichaelBorders that may be a big part of the problem because the lid switch appears to be broken. Thanks for your reply it clears things up a bit.
@DIYwithMichaelBorders
4 жыл бұрын
Tabie Wade You are very welcome. 😎👍
@highc187
Жыл бұрын
Great video 👌🏾
@DIYwithMichaelBorders
Жыл бұрын
We appreciate that, hope you’re enjoying your Saturday. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem. Toolboxtoken.com Reach out to us any time! 🧰
@ib4u737
4 жыл бұрын
Thanks !!!!!!🙏🏾 save me from buying a new washer 👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾
@DIYwithMichaelBorders
4 жыл бұрын
IB4U Awesome Awesome & so happy to help. You can put that money towards something else. 😀 Let us know if you have any questions, us fellow DIY’ers need to stick together! 😎👍🔧🔩
@ib4u737
4 жыл бұрын
DIY With Michael Borders Will Do my friend 👊🏾
@DIYwithMichaelBorders
4 жыл бұрын
IB4U 😎👍🔧🔩
@vtownhog
4 жыл бұрын
Hi thanks for the awesome video. Very thorough and easy to follow. Need your help or anyone in this comment section. Had an issue with the washer just stopping when it's suppose to go into the spin cycle. Tried it on low-med-high load. So I bought a timer. That didn't work, so I replaced the lid sensor. Not that either. So I am stuck trying to figure out how I am going to proceed to the next step. Any help would be greatly appreciated
@DIYwithMichaelBorders
4 жыл бұрын
p funk Thanks for watching, glad it helped. How is your water flow? When you start your cycle, your water comes into your washer through the valve. Over time, this valve clogs up decreasing the flow rate. This can cause your exact symptoms. Below is a link to our step-by-step video that shows replacement of valve. kzitem.info/news/bejne/pZ-GrI6JhptzoW0 Keep us posted. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your KZitem Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@vtownhog
4 жыл бұрын
@@DIYwithMichaelBorders hi wow ty for responding. Yes the wateflow comes out through the valve. Does not seem to be any clogs. The water flow is perfect.
@DIYwithMichaelBorders
4 жыл бұрын
p funk Thanks for the reply. The next step is to verify your Drain Hose is clean & clear. A dirty and clogged hose will not allow the water to be drained efficiently...causing water pressure buildup which may cause the washer to stop mid cycle. 😎👍🔧🔩
@vtownhog
4 жыл бұрын
@@DIYwithMichaelBorders I checked those also no clogs in the drain hoses.
@DIYwithMichaelBorders
4 жыл бұрын
p funk Thanks for the reply. Any updates? 😎👍🔧🔩
@AtheneNike1
2 жыл бұрын
Hello again! I read your comment just now, and as I was editing a reply, somehow I seemed to have lost your comment! How odd.. thanks for replying back so quickly in the morning whilst having your coffee! I have a font loader so I am assuming that you instead of a lid switch for a top loader it is the same as the " washer door lock and switch assembly", for a front loader. Also a very strange thing- this morning for no reason, without me filling the small tub for the fabric softner a moderate amount of fabric softner just reappeared on it's own in the little dispensing unit - it was light blue and clean - almost as if I had added some of it just then....I have been overdoing the softner off late- so could it just be a blocked drainage pipe? I'm guessing back pressure is needed for this to happen but maybe it just happens if you leave a lot of water ( currently six inches deep) still in the machine....
@DIYwithMichaelBorders
2 жыл бұрын
Thanks for the reply, door lock mechanism is very possible. Once you turn the machine on and start the cycle, if you hear a clicking sound near the door area, your door lock mechanism is working as designed.
@elizabethvillalobos4504
3 жыл бұрын
Hello I enjoyed your demonstration. Can you please show how to remove the front of the admiral washer? The water comes out very dirty and we think it needs to be cleaned on the inside. Thanks
@lanaybaker4748
6 жыл бұрын
This worked perfectly thanks so much for your help/tips
@DIYwithMichaelBorders
6 жыл бұрын
Lanay Baker Thanks for watching. We are glad the video helped! That’s awesome! We really appreciate you taking the time to reach out to us and share your comment. If you have any additional questions down the road, let us know! Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@msdkcooper10
7 жыл бұрын
my Whirlpool washer will fill up with water but that's it, it will not agitate, drain water or spin, when you select your wash cycle it will fill with water and you can hear a humming noise coming from where the timer is and that's it. I had a washer full of clothes and water.
@DIYwithMichaelBorders
7 жыл бұрын
Thanks for checking out the video. Most of the time you run into your symptoms...your timer has faulted and is no longer receiving and sending the correct signals to all connected parts which in return, stops the cycle at random locations...NO FUN. I would try replacing your timer. Also, I recumbent replacing your lid switch as well because that acts as a safety precaution and will put a hold on the cycle near the rinse/spin portion once it fails. The lid switch is very inexpensive and takes 10 minutes to replace. Below is a link to my new video on replacing Lid Switch. Keep me posted and please subscribe to the channel that would be awesome! kzitem.info/news/bejne/kp6KuJdjmIKfg20&lc=z12wirlhpvavj1ypy04ci3tozofnyd3avp00k
@H-zKUyThmm05XneN_j_1vQ
6 жыл бұрын
Thanks for the video. I have a very similar washer that I think might be having the same problem. One thing I want to try before I buy a new timer, though, I have read that there may be a sock or something stuck in the drain. I read there should be a plate on the back near the outlet hose that I can remove and check the drain but I can't find it on mine. Since you have such a similar model, I was hoping you could tell me how to check the drain to see if it is clogged?
@DIYwithMichaelBorders
6 жыл бұрын
Tobias Vargrim Thanks for checking out the video and sharing your experience Tobias! To gain access to the internal parts that the hoses connect to, you will need to remove entire washer shell/case. You will then be able to remove hoses to check & see if anything is clogging! Keep us posted! Please subscribe to the channel and turn on your KZitem notification Bell that would be awesome thanks again!
@chilistakeout229
7 ай бұрын
Did this, still getting a humming noise once it gets to the rinse cycle, every other cycle other than rinse works
@epidemik3able
5 жыл бұрын
Is it common for the other cycles to work normally if the timer seems to have failed on one of them?
@DIYwithMichaelBorders
5 жыл бұрын
Michael Weber Thanks for watching & yes it is. The internal design of the timer assists in coordinating the washing machine through its cycle. At any point, any one of those internal mechanisms inside the timer wear out or fail, the timer will no longer be able to continue guiding the washer through all of its cycle. In other words, the timer guides the washer through wash, rinse, and spin...but can stop at any point during that full cycle if any of the internal timer parts fails. Hope this helps. Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@gcfun
4 жыл бұрын
I have this same issue and model. Can you link me to the part you used?
@DIYwithMichaelBorders
3 жыл бұрын
If interested in purchasing this product, visit our Amazon affiliate link below. amzn.to/3cjEqCY 😎👍🔧🔩
@TammyCLadyWhiteWolf4
3 жыл бұрын
How do you know if the timer is bad ? I also made sure the filter are clean and that cold is connected in the right spot. Someone said it could be the little button that tells the machine if the lid is open or not , how do I check that. Because I cant afford to buy parts I dont need. I have an admiral washer and dryer. The dry doesnt always get warm . I was told if it was the heating element that that would just go out completely it wont get hot only some time it one way or the other. Sorry I'm a single lady and learning to be a diy. Gal. Appreciate any advise you may have and thank you
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for checking out the video Tammy, great question! The Timer controls the “Cycle Flow” and continues to move the cycle through the steps. As the internal parts of the Timer begins to wear out...you see the washer stopping at either “Drain or Spin”... The Lid Switch is also a key part in the cycle...once you lower the Lid/door...you will hear a click. This click secures the electrical current and sends a message to the Timer to begin the Cycle. Also...once the cycle gets to the spin portion, the timer re-communicates with the lid switch to verify that the lid is closed for safety purposes...example: you do not want the washer to be spinning with the lid open...water will fly everywhere 😱 I recommend purchasing both the timer and the lid switch as they work together to move the washer through the cycle. To order parts, Go to: repairclinic.com Keep us posted. Welcome to the DIY Raptor Club. 😎👍🔧🔩
@susandowd1666
Жыл бұрын
Oh my gosh this just happened to me! 67 yr old woman & gonna give this a shot! Do you have suggestions where to buy parts?
@tezirkle47
7 жыл бұрын
Was ready to do this, but saw a video on how to fix the lid switch-that was the problem. If the timer goes out, I'll know where to come back to.
@DIYwithMichaelBorders
7 жыл бұрын
Very cool, thanks for checking out the video. I have several other videos on washer/dryers. Please Subscribe to the channel that would be awesome thanks again! Below is a link to our Lid Switch video. kzitem.info/news/bejne/kp6KuJdjmIKfg20
@ericgan4042
3 жыл бұрын
Thank you! , i fixed my lid😊
@livenfree
3 жыл бұрын
Did yours do absolutely nothing?
@telumears
2 жыл бұрын
Great video I have same problem and in researching this I see alternative issue with the lid switch may be needing replacement. Did you diagnose that before buying a replacement part? Thank you.
@DIYwithMichaelBorders
2 жыл бұрын
Thanks for watching & you do have the option of testing the switch continuity. If no continuity, part is faulty. 😎👍
@ericbrown7990
3 жыл бұрын
Don't forget to check if your cold water is turned off that was the problem with mine I just replace the hose and forgot to turn the water back on
@KathrynBarattini
Жыл бұрын
Hi! Thank you for this video. I’m having a heck of a time detaching the larger plug of wires. Any tips?
@classicredwine
Жыл бұрын
I’m so pissed. I ordered a certified part from Sears and followed this video and the $200 part has gone out after only 3 months! I’m back watching your video because thankfully I kept my old part that still worked but was faulty so I have to go through this again. And Sears only has a 60 day return policy so beware to everyone who is considering purchasing this part from Sears.
@DIYwithMichaelBorders
Жыл бұрын
Thanks for watching, that’s awful that the part only lasted 3 months…😲 Well…we are happy to hear our video can be helpful for you yet again. 😎👍
@classicredwine
Жыл бұрын
*UPDATE* To my comment for anyone who happens to read it. Thankfully my new part was not bad. The large connector got damaged during my original repair because I struggled to unhook it. As soon as I touched the connector this time it fell right out and I immediately knew that was the problem. Even though it no longer “locks/snaps” in, I pushed it it as far as it would go and put a strip of electrical tape going across the top to hold it in and the washing machine went into the rinse cycle immediately. So before you toss out your part, make sure it’s connected snuggly
@DIYwithMichaelBorders
Жыл бұрын
@@classicredwine Thanks for the follow up and sharing this. Well, looks like you have a spare part on-hand for the future…or for another machine that’s the same. 😎👍
@loualcaraz6497
2 жыл бұрын
My repairman came in and removed the back cut and retied some wires together and my washer was fixed. 10 mins.
@johnnystaccata
Жыл бұрын
I don't think you diagnosed the timer as faulty
@DIYwithMichaelBorders
Жыл бұрын
Thanks for watching, did it end up being the Timer in your case? The Lid Switch is also a common cause.
@johnnystaccata
Жыл бұрын
@@DIYwithMichaelBorders I think it is the lid switch. Changing the timer on a washer without diagnosing it, is like changing the gas valve on a wall furnace without fully checking it out. A lot of plumbers approach it like that, and the customer gets stuck with the bill.
@DIYwithMichaelBorders
Жыл бұрын
@@johnnystaccata Thanks for the follow up, heres a link to a video showing replacement of lid switch. kzitem.info/news/bejne/kp6KuJdjmIKfg20 😎👍
@briananderson9320
3 жыл бұрын
My washer stops after after rinse and won’t drain in that cycle. I can turn the timer to spin and it will drain and spin, just not in the same cycle. Confused if this is a timer or lid switch problem. Kenmore 80 series top load model.
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. You can test lid switch with volt meter. If you do not have a voltmeter, we recommend replacing lid switch first as it is the more friendlier price & replacement process. If that doesn’t work, it is time to replace your Timer. Please keep us posted, us fellow DIY’ers need to stick together! Enjoy your day. 😎👍🔧🔩
@LALNatalieG
3 жыл бұрын
How would one diagnose whether there might be a different problem causing this, vs going straight to replacing the timer? There’s other causes for the same issue...
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. Great question & you can test your lid switch. Many helpful videos on that. If you find your lid switch is faulty, check out the link below. It shows the replacement steps of a lid switch. kzitem.info/news/bejne/kp6KuJdjmIKfg20 😎👍🔧🔩
@michaelremillard2215
3 жыл бұрын
Note to self : check the lid switch fist
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. We appreciate you sharing your thoughts, enjoy your day michael. 😎👍🔧🔩
@VintageGearMan
3 жыл бұрын
Thank you.
@DIYwithMichaelBorders
3 жыл бұрын
You are very welcome, happy to help. Enjoy your day. 😎👍🔧🔩
@BlueMarkEntertainment
Жыл бұрын
Mine did exactly this. I opened her up and replaced the timer. Put it all back together. Plugged it in and it started to rinse and then suddenly stopped again. Still doesn’t work. Not sure why
@BlueMarkEntertainment
Жыл бұрын
I found out why. So mine did just like this, stopped on Rinse and wouldn’t rinse or drain. I put a new timer in. Didn’t work. Cleaned all wire connections and checked the door latch. Still nothing works. Sometimes the washer makes a buzzing sound like it’s trying to work. Turned out one of my kids socks was stuck in the pump. Once I got that sock out and put her back together, it worked. Wasn’t the timer at all so I kept the old timer in case.
@WiSeNhEiMeR-1369
3 жыл бұрын
in my case it was my: "LID must be CLOSED" switch that was defective - I simply eliminated the SWITCH & twisted the two wires together + crimped on a wire connector & water-proofed the connection with some LIQUID-ELECTRIC-TAPE --- now I must remind myself NOT to reach into a Spinning Washing-Machine ... ie: the 10% TEST
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for watching Dave. Let us know if you have any questions. Hope all is well. 😎👍🔧🔩
@codeblack1906
5 жыл бұрын
I changed my shift actuator and lid switch and my machine still stopping on the rinse cycle have to manually set it to drain and rinse and push the start Botton for it to complete. I guess it may be the timer
@DIYwithMichaelBorders
5 жыл бұрын
Codeblack WestPhilly Thanks for watching & after reading your comment, we definitely are leaning toward a faulty Timer. That’s awesome you replaced your Actuator & Lid Switch as well. This ensures those replaced parts are brand new & ready to work & last a long time. Keep us posted on your project! We purchase all our parts from: RepairClinic.com We also recommend checking several other places to get the best price! Hope this helps, please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@Wadejm533
4 жыл бұрын
My dial want move, we're having to turn it to the next setting. Is that the timer switch?
@DIYwithMichaelBorders
4 жыл бұрын
The Hammerdown Thanks for watching. Sounds like the inner mechanicals of the Timer have failed. Replacing your Timer should fix issue. Keep us posted! 😎👍🔧🔩
@deankaufman8418
2 жыл бұрын
Somebody forgot to mention the screw, on the front, that holds that timer on.🤔🤪
@danamandaharbaugh5883
Жыл бұрын
When you say stops at the rinse cycle, do you mean it fills but never spins or that it runs water but the drain doesn't close. The latter has happened twice. It's like what mechanism closes the drain malfunctions, and the water just runs continuously. I want to make sure I'm explaining my problem to Google correctly. 😄
@DIYwithMichaelBorders
Жыл бұрын
Thanks for watching, in your case you most likely have a faulty valve. Below is a link to our video discussing more about the specific valve that causes this. kzitem.info/news/bejne/yaKQp3WbqH1jnH4 Please keep us posted and hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time! 🧰
@danamandaharbaugh5883
Жыл бұрын
@@DIYwithMichaelBorders Thank you for the quick reply! I watched that video, but I'm pretty sure it's not the inlet valve because there is no water running when the washer is off. The water runs throughout the cycle at appropriate times; it'll go through the wash cycle and drain with no issue. When it starts to refill the bowl for the rinse cycle, it just doesn't fill up. It looks like running a bathtub with the drain open. It fills partly just because the amount of water coming in is greater than the drain. It's only happened twice so far, and not in back-to-back loads which leads me to believe it's not a total failure of a part yet. It will resume the full cycle with no issue if I switch it off, move the dial position, and restart it which is why I was initially thinking timer. I could see it being something with the pressure switch as well? I need to check my stabilizer rods as well because it's shaking like crazy even when completely level.
@DIYwithMichaelBorders
Жыл бұрын
@@danamandaharbaugh5883 Thanks for the reply, we can set the valve possibility to the side for the moment. Have you replaced Lid Switch in past? While washer is spinning, does washer abort spin if Lid is slightly opened out of Lid Switch? If so, it’s your Lid Switch. Once washer gets to the point where it doesn’t fill, will it start filling if you carefully move Timer knob forward in the cycle? If so, it’s your Timer.
@danamandaharbaugh5883
Жыл бұрын
@@DIYwithMichaelBorders I usually move the timer knob backwards rather than forward, but yes, it will return to normal function if I move it.
@DIYwithMichaelBorders
Жыл бұрын
@@danamandaharbaugh5883 Thanks for the reply, we recommend replacing both your Timer and Lid Switch at same time. Nothing wrong with installing a new Lid Switch at the same time.
@mtahir038
6 жыл бұрын
Thank you, I will give it a try
@DIYwithMichaelBorders
6 жыл бұрын
M Tahir Awesome Awesome thanks for watching. Let us know if you have any additional questions along the way. Keep us posted on your project! Please subscribe to the channel and turn on your KZitem notification Bell that would be awesome thanks again! Also below is a link to our Appliance/Home Repair Video PlayList. It contains several additional videos that will be very helpful to you...including more videos on your washing machine. Definitely check those out! kzitem.info/door/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii
@mtahir038
6 жыл бұрын
DIY With Michael Borders scrolled thru some of the comments and and ended up finding the switch was just lose.. im all good now 😁
@DIYwithMichaelBorders
6 жыл бұрын
M Tahir Very cool. Below is a link to a video that shows step-by-step process of replacing your Lid Switch! You mentioned your switch was just loose however if you ever need to replace it if it faults out you’ll have a video that will help! 😎👍🔧🔩 kzitem.info/news/bejne/kp6KuJdjmIKfg20
@mtahir038
6 жыл бұрын
DIY With Michael Borders thank you
@DIYwithMichaelBorders
6 жыл бұрын
M Tahir 👍
@redtrinitygirl
Жыл бұрын
Thanks going to take it apart and find out whats worng!
@DIYwithMichaelBorders
Жыл бұрын
You are welcome, looking forward to hearing back from you on what you find.
@xHannahx0
7 жыл бұрын
We have a maytag washer and I did laundry as usual, so I left for work and came back hours later and the cycle just completely stopped at the spin portion so my clothes were just sitting in a pool of water. So I unplugged it and tried to reset it, but now my washer won't even turn on, let alone drain the water. I did unplug it for a minute and it did turn on, but only in the "sensing" portion of the cycle (the first step). It won't do anything but just sit there. I'm really frustrated and unsure what to do...
@DIYwithMichaelBorders
7 жыл бұрын
Hannah King Thanks for checking out the video and sharing your comment Hannah...so sorry you’re having trouble. Something has failed and we need to pin-point which part. Try toggling the cycle knob a tiny bit forward past the point that the wash cycle stopped...then push knob in and see if it starts the cycle again. If it does, it can be the “Timer” that has failed which you see in this video. The other option “however more likely if the cycle stoped at Spin” is the Lid Switch. The lid switch is very easy to replace and pretty inexpensive. I recommend purchasing your replacement parts from: repairclinic.com Either way, I would purchase both parts and replace them because the Lid Switch is pretty cheap and very easy to install. I have attached a video that shows the Step-By-Step on how to replace Lid Switch. Your washing machine is very important and we can definitely fix this together. Keep me posted on if it starts running after you move that knob slightly past where it stops...as I mentioned before. Please subscribe to the channel and turn on your KZitem notifications that would be awesome thanks again Hannah! kzitem.info/news/bejne/kp6KuJdjmIKfg20
@JasonTylerRicci
5 жыл бұрын
My side load LG was stuck on "rinse". Motor was making a noise, but no spinning. There was water leftover. Got the OE code. New pump and pressure switch. No obstructions whatsoever. Yet, it still hangs on the "rinse" cycle. I can't figure it out
@DIYwithMichaelBorders
5 жыл бұрын
Jason Ricci Have you replaced your Door Switch / Lid Switch? Below is a link to our video that shows how to perform an EMER drain, you may find this helpful in the mean time. kzitem.info/news/bejne/r3qFrYqqpYd1pqg Keep us posted! 😎👍🔧🔩
@janislloyd520
3 жыл бұрын
what is usually cost of a timer
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for watching. Happy to help & welcome to the DIY Raptor Club. Standard price is around $25.00. Hope this helps. Enjoy your night. 😎👍🔧🔩
@TheSeancassady
7 жыл бұрын
When replacing the first part (silver in this case) dial, can it only go on one way? I mean could you replace it incorrectly where the indicator mark is not aligned correctly or do the grooves make it so it can only be replaced in one position? I'm talking about the piece that is underneath the button. Also, is this the only possible thing that could be causing the washer to stop mid cycle?
@DIYwithMichaelBorders
7 жыл бұрын
Annony Mouse Thanks for checking out the video Annony Mouse! Great question. The knob assembly is designed to fit on the housing in only one position. This is to prevent any confusion in regards to the position of Knob and position of Timer. To answer your 2nd question: No...and I’m so glad you asked! At any point the “Lid Switch” becomes faulty, it will not allow the cycle to spin. This is a safety feature built into the Machine to alleviate water flying ALL OVER THE HOUSE with the washer lid open 😱...That definitely would be a lengthy clean up! With this said... once the lid switch fails... the cycle no longer allows the washer to enter the spin cycle. Below is a link to a video that runs you through the step-by-step process on how to replace your “lid switch” and get the washer back up and running properly. I always recommend replacing the “Timer” and the “Lid switch” since both parts can cause this issue and in most cases both parts have a life expectancy of five years. Keep me posted on your progress. Please subscribe to the channel and turn on your KZitem notifications that would be awesome thanks again 😎👍 kzitem.info/news/bejne/kp6KuJdjmIKfg20
@mclc432
4 жыл бұрын
How would the water valve tie into everything? Not sure how it is that the normal cycle works fine on the wash portion of the cycle but then hang on the rinse portion of the cycle??
@DIYwithMichaelBorders
4 жыл бұрын
mclc432 Thanks for the question. The water valve has a screen inside each hot and cold connection point where your water lines secure themselves to the machine. Over the years, the screens gather dirt and grime and lead to a degraded water pressure entering the machine...weeeellll.... unfortunately this can trip your cycle and cause your cycle to stop. Hope this helps! 😎👍🔧🔩
@RedZone4400
5 жыл бұрын
I fix all appliances about 99/100 times not the timer. Lid switch, motor coupler, bad clutch timer is the last thing to check.
@RedZone4400
5 жыл бұрын
That being said good video
@DIYwithMichaelBorders
5 жыл бұрын
RedZone4400 Thanks for watching! Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@stephenmehallo3902
3 жыл бұрын
Good informative video but the audio is extremely low. Before releasing these videos one should also check the audio levels. Having a lavalier microphone or external microphone also helps
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. Sorry for any audio inconveniences. Let us know if you have any questions. Enjoy your day! 😎👍🔧🔩
@brianholt4725
2 жыл бұрын
Are you available to answer a quick question?
@selspkd
Жыл бұрын
So I replaced the water valve assuming that was the problem. On the normal cycle only hot water comes out. When I switch to cold it just stops. Switch it to hot and it’s coming out. However it proceeds to wash and once it hits rinse it won’t proceed further. What could that be?
@DIYwithMichaelBorders
Жыл бұрын
Thanks for watching, the valve screens being clogged are the most common cause however since you have a brand new valve and screens, it’s possible that your cold water shutoff valve is not fully open. Keep us posted and hey if you’re into crypto trading, check out our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰
@braando
4 жыл бұрын
How did you determine that was the problem?
@DIYwithMichaelBorders
4 жыл бұрын
James Barnes Thanks for checking out the video. Great question! The Timer controls the “Cycle Flow” and continues to move the cycle through the steps. As the internal parts of the Timer begins to wear out...you see the washer stopping at either “Drain or Spin”... The Lid Switch also is a key part in the cycle...once you lower the Lid/door...you will hear a click. This click secures the electrical current and sends message to Timer to begin the Cycle. Also...once the cycle gets to the spin portion, the timer re-communicates with the lid switch to verify that the lid is closed for safety purposes...example: you do not want the washer to be spinning with a lid open...water will fly everywhere 😱 We recommend purchasing both the timer and the lid switch as they work together to move the washer through the cycle. To order parts, Go to: repairclinic.com Keep us posted! Please subscribe to the channel & ring your KZitem bell 🔔 this will be very helpful to us thanks again 😎👍🔧🔩
@caciocavalloster
3 жыл бұрын
anything I should check after the lid switch before replacing the timer? Anyway to bypass the timer to make sure it’s the problem?
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for watching & the lid switch & timer are the two parts that cause this issue. If it’s not the lid switch, it will definitely be the timer. Keep us posted, enjoy your night. 😎👍🔧🔩
@jeziz5016
7 жыл бұрын
We have a Samsung top load washer that was working fine until started to stopped in the spin cycle and leave the clothes too damp, also I notice that is changing it self the size of the load for example: I put medium load but switch to extra large all the time. Hope you can help us to fix this problem, we have no more than a year since we buy the set that's why we want to try get fixed before have to spend on a new machine. Thanks in advance!
@DIYwithMichaelBorders
7 жыл бұрын
Jez Iz Thanks for checking out the video and sharing your experience. Definitely important that we get this figured out together...from the symptoms that you have mentioned lead me to the Timer or the Lid Switch. The Timer controls the “Cycle Flow” and continues to move the cycle through the steps. As the internal parts of the Timer begins to wear out...you see the washer stopping at either “Drain or Spin”... The Lid Switch also is a key part in the cycle...once you lower the Lid/door...you will hear a click. This click secures the electrical current and sends message to Timer to begin the Cycle. Also...once the cycle gets to the spin portion, the timer re-communicates with the lid switch to verify that the lid is closed for safety purposes...example: you do not want the washer to be spinning with a lid open...water will fly everywhere 😱 I recommend purchasing both the timer and the lid switch as they work together to move the washer through the cycle. To order parts, Go to: repairclinic.com Attached below is a video showing the step-by-step process on how to replace your lid switch...it’s very easy and both parts are very inexpensive. Keep me posted! Please subscribe to the channel and turn on your KZitem notifications that would be awesome thanks again 😎👍 kzitem.info/news/bejne/kp6KuJdjmIKfg20
@jeziz5016
7 жыл бұрын
Thank you very much for your answer, we are going to do it as you suggest, I'll keep you update. and of course that I subscribe to your channel.
@DIYwithMichaelBorders
7 жыл бұрын
Jez Iz That’s great news and thanks for the update! You should be back up and running after the repairs. Please let me know if you have any questions along the way. 😀👍
@suedavidson8085
2 жыл бұрын
How did you know the timer was broken?
@DIYwithMichaelBorders
2 жыл бұрын
Good morning & welcome to the DIY Raptor Club, after replacing the lid switch, the problem still existed. This led us to the timer and after replacing Timer, machine was good to go. Below is a link to a video showing the replacement process of the lid switch. kzitem.info/news/bejne/kp6KuJdjmIKfg20 😎👍🔧🔩
@georgecass8529
Жыл бұрын
I have a electrical back board so how do I fix it .
@skylermummert24
4 ай бұрын
So is it the timer if I can switch it to spin/drain and it will go? Our washer stops at rinse but you can switch to spin/drain and it will run?
@DIYwithMichaelBorders
4 ай бұрын
Thanks for watching. Great question and in that case, we would replace Timer first. While replacing Timer, we recommend also replacing your Lid Switch. These two parts work together during the cycle and cause make a huge improvement to your machine’s overall performance if replaced and brand new. Below is a link to a video showing replacement of Lid Switch. kzitem.info/news/bejne/kp6KuJdjmIKfg20si=FWwSUxJVzUi8GRn5 Keep us posted. 😁👍🧰
@ACAMPS.HITHOUSE
4 жыл бұрын
Man I did all the steps taking everything apart only to learn I need a part. I thought he was gonna show us a trick on how to get it going
@DIYwithMichaelBorders
4 жыл бұрын
Aaron Campos Thanks for watching Aaron. What’s your update? Definitely let us know if you have any questions. We are standing ready to help you successfully complete your DIY project. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😀👍🔧🔩
@glengreen1426
Жыл бұрын
I have the exact same machine where did you buy your timer
@DIYwithMichaelBorders
Жыл бұрын
Thanks for watching, that makes it easier. 😁👍 If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/3cjEqCY 😎👍
@LibertyWW
Жыл бұрын
Thanks comment section!🏆
@DIYwithMichaelBorders
Жыл бұрын
Thank you. 😎👍
@kawaltd100082
5 жыл бұрын
I have a LTE6234DQ1 Whirlpool DOUBLE STACKABLE COMBO UNIT. First the dryer kept running and wouldn't shut off on it's own. So I replaced the dryer timer the first time I tried to use the washer it wouldn't drain out. It Haas a directdrive pump and it worked ok before I changed the timer on the dryer (yes it is the correct one) . I have also now changed the washer timer thinking the excessive heat may have damaged it. Still not working lid switch sounds ok. All wires in correct place. Any suggestions?
@DIYwithMichaelBorders
5 жыл бұрын
Rick Yost Thanks for watching & we hope the video helped. It’s very possible that your Lid Switch has failed. In most cases, a failed lid switch will still make that normal clicking sound however the internal parts and electrical sensor that sends that electrical message to your timer informing it that the lid is closed....has failed. A new lid switch may solve your problem. We really enjoy making these helpful videos for our fellow DIY’ers. Many more DIY videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@kawaltd100082
5 жыл бұрын
Lid switch tested ok. I got it working now . Blew through the hose for level control switch and pulled off the violet wire on the dryer timer and reconnected it thinking it wasn't making good contact. Now it's working fine. What ever it was it's fixed now. Thanks for your input.
@DIYwithMichaelBorders
5 жыл бұрын
Rick Yost Very cool & thanks for sharing your update Rick. 😎👍🔧🔩
@crazyeddiesdetecting
7 жыл бұрын
I have a GE that does agitate but doesn't rinse/spin/drain. The timer makes noise and that's it. If I move the switch back to agitate it will once again wash. Does this sound like the timer is bad or can the pump be bad? The noise is definitely coming from the timer though and not the pump. Thanks you for any hep
@crazyeddiesdetecting
7 жыл бұрын
I figured it out, I had a piece of towel lodged in the pump. It was very difficult to hear the pump turning on and off while trying to work with the timers typical noise in the foreground. When I removed the front panel it was clear as day when starting and stopping the machine. I figured I'd post in case someone else ever has the same issue and stumbles along my post. Thanks for your help
@DIYwithMichaelBorders
7 жыл бұрын
Water Detecting Croatia Thanks for checking out the video and sharing your comment and experience. The household washing machine is a pretty darn important machine that's helps life run smoother haha. Thanks for the update. I was reading your initial comment and I was thinking it was the timer. Glad you found the towel. Please Subscribe to the channel and turn on your youtube notifications that would be awesome thanks again 😀👍
@tannaweaver5470
7 жыл бұрын
Just purchased a new Crosley washing machine..nothing fancy.. It will fill with water, drain, but will not rinse or spin. I have noticed that the lid-lock light does not come on when it starts. Once it drains, the light goes back to wash.. If I manually set the machine to rinse & spin, it will work. What could this be?
@DIYwithMichaelBorders
7 жыл бұрын
Tanna Weaver Thanks for checking out the video and sharing your comment and experience. If you are experiencing same issues as in this video, it's possible that your timer has begun to fault. It's also very possible that your Lid Switch has begun to fault. The lid switch can be tested and replaced cheaper. Attached is a video how to change lid switch. Keep me posted! Your lid light not coming on means your lid is not connecting with the sensor...Let’s figure this out! Please Subscribe to the channel and turn on your notifications that would be awesome thanks again. 😎👍 kzitem.info/news/bejne/kp6KuJdjmIKfg20
@ellonysman
2 жыл бұрын
Is your door latch tight? Loose might interrupt cycle
@DIYwithMichaelBorders
2 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. You’re spot on, a loose door latch will cause interruptions to the cycle. 😎👍
@stefanieflorencio4328
6 жыл бұрын
I can not for the life of me get the panel to lift off. I have the same make, but mine appears to be an older model. There are the top screws (which I have removed) but there are no other screws ANYWHERE. Ive tried pulling, pushing, lifting, sideways, and nothing gives. Any suggestions? Thanks!
@DIYwithMichaelBorders
6 жыл бұрын
Stefanie Florencio Thanks for checking out the video and sharing your comment. Lets get this figured out! It’s possible that you have a model similar to the one in the video below. There are additional screws under end caps that must be removed. Below is a link to video...keep us posted! Please subscribe to the channel and turn on your KZitem notification Bell that would be awesome thanks again! 😎👍🔧🔩 Video: kzitem.info/news/bejne/23xnrWuabHh-mWU
@Msleelee9487
Жыл бұрын
i have this very model i changed the timer out and it worked fine a month and now it's doing it again i don't know what up with that
@DIYwithMichaelBorders
Жыл бұрын
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. That’s no fun…by chance did you purchase an aftermarket part or original equipment manufacturer (OEM) part? Aftermarket parts are great in some situations however a bit dicey in others. It’s also possible that your Timer is still good however your Lid Switch has failed. We recommend replacing Lid Switch before replacing the Timer again. Below is a helpful link. kzitem.info/news/bejne/kp6KuJdjmIKfg20si=oPAUy4ssWhWAPtA3 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
@mrsmith5114
2 жыл бұрын
Sadly didn't fix my issue so will be sending this item back. My motor isn't turning on, no hum from my motor but I hear a hum from the timer area. I also replaced the capacitor. Getting a new motor to see if that's the issue. But my motor wasn't locked up, clean just nothing happens.
@DIYwithMichaelBorders
2 жыл бұрын
Thanks for watching & sharing this, we are looking forward to hearing back from you with the update on the motor install when that arrives. That’s a bummer you replaced a part & it didn’t fix it. Let us know if you have any questions, we DIYers need to stick together!!!
@mrsmith5114
2 жыл бұрын
@@DIYwithMichaelBorders O, thanks for responding back :) I replaced the dial, the lid switch, the capacitor and now the motor all new. Still the motor will not turn on. I do hear a humming noise from the pressure switch(nothing from motor), but not sure if that's normal or would cause this issue. My washer fills up fine, but then just stops when it's at the correct level. Will not drain(drain pump is fine) From there the humming noise. I even tried to spin the motor with my hand, but still no movement/power to it. If you can think of something for me to try please let me know. Feel free to link an affiliate link of the part. I am stumped atm. Even tried to reset doing the lid opening and closing 6 times. Model wtw5300vw3
@mrsmith5114
2 жыл бұрын
Never mind heh =/ So all that work and it was my lid switch after all. I installed a new one before thinking that was it, and still had the same issue. So my old one went bad, and the new one didn't work. Only worked when I tied the 2 wires together and left the ground plugged in. Any ways thanks for all that you do, now I have many things to return lol.
@DIYwithMichaelBorders
2 жыл бұрын
@@mrsmith5114 Good morning, that’s great news you found the cause. By the looks of it, you have been busy!!! All those replacement parts are going to make your machine last a long time, that’s awesome!!! Hopefully many stress free days ahead for you from here, & if you like football, you can relax & watch some Sunday games. 😎👍
@peterford9369
6 жыл бұрын
Why don't they sell the metal push to release spring clips that are stuck into the end caps of the control panel, separately? Ours are rusted and one broke and now i have to buy the whole endcap, just to get the spring? Or do you know if they do sell them individually? Thanks. Sorry,,was mistaken. I found a sears schematic that shows the clip separate. But come on,,,16 bucks a piece? Insane.
@DIYwithMichaelBorders
6 жыл бұрын
Peter Ford Thanks for watching Peter. Great question. We recommend visiting Repairclinic.com Check this site out & enter your Washing Machine model #. After that, every single part available for your specific Washer will come up. Keep us posted! Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@peterford9369
6 жыл бұрын
@@DIYwithMichaelBorders Thanks Mike. Yeah, I've delt with repair clinic. They are helpful. Always the way it is,,the specific appliance you have they never show. I'm working in a Kenmore elite,by whirlpool and one of the metal clips was rusty and broke when I opened it. Dryer too. They're making a fortune on clip sales. 16 bucks a piece? Crazy. Thanks for the write back,, I'll bell y'all. Thanks.
@DIYwithMichaelBorders
6 жыл бұрын
Peter Ford Thanks for the reply. Definitely try Ebay as well. You may be able to come across a large variety of parts for your washer online. 😎👍
@frannie4675
2 жыл бұрын
Y kenmore 90 series stops at rinse tub otherwise had agitated but not drain for rinse. If I advance it still won’t spin or rinse. Appreciate help ty
@SONJAGRIFFITHTAYLOR
4 жыл бұрын
My washer won’t spin going through the cycles other than delicate, spins out. On other cycles I have to catch the cycles, lift the door and close it then it works fine. I am taking care of an estate but need my washer to work while here, I don’t want to purchase another to just turn around and have to sell. I always loved this washer, please help.
@DIYwithMichaelBorders
4 жыл бұрын
SONJA Thanks for watching & you may have a failed Lid Switch. Below is a link to our step-by-step video that shows replacement of Lid Switch. Keep us posted! kzitem.info/news/bejne/kp6KuJdjmIKfg20 Please subscribe to the channel and Ring your KZitem Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@SONJAGRIFFITHTAYLOR
4 жыл бұрын
DIY With Michael Borders if it were the lid switch, wouldn’t it be all cycles? It drains, just won’t spin on normal, heavy, etc but does drain and spin on delicate cycle. Thank you so much for the quick reply
@DIYwithMichaelBorders
4 жыл бұрын
SONJA Thanks for the reply. It’s very possible. If that doesn’t fix it, it’s almost 100% a failed Timer. 😎👍🔧🔩
@SONJAGRIFFITHTAYLOR
4 жыл бұрын
DIY With Michael Borders where is the best place to purchase either of these parts? The price range using google is pretty extreme
@SONJAGRIFFITHTAYLOR
4 жыл бұрын
DIY With Michael Borders it’s a Kenmore, model #23832100
@adanarceo4636
Жыл бұрын
Si basically once you have that kind of issues you have to replace the timer.?
@DIYwithMichaelBorders
Жыл бұрын
Thanks for watching, you can replace Lid Switch first to see if that fixes it. Below is a video link of us performing this. kzitem.info/news/bejne/kp6KuJdjmIKfg20 Replacing Lid Switch is a quick friendly DIY project. 😎👍
@Jammer170909
4 жыл бұрын
Wouldn’t it be better to check first that the drain hose isn’t kinked, the door latch isn’t obstructed and therefore won’t drain or spin and proceed to next step being replacing the timer?
@DIYwithMichaelBorders
4 жыл бұрын
Jammer170909 Thanks for watching & that’s great advice. We appreciate you sharing. 😎👍🔧🔩
@patbiat929
Жыл бұрын
Hello, I have the same kind of machin. For me it fills water after that it does nothing only a noise of a running motor. How much timer cost you?
@DIYwithMichaelBorders
Жыл бұрын
Thanks for watching, the Timer cost roughly $100.00 We also recommend replacing your lid switch along with your timer as they play a significant role in the machines cycle.
@Mabbio01
5 жыл бұрын
My machine has buttons. It continued the cycle once I emptied out all the water and the clothes but there was still some water in the machine.
@DIYwithMichaelBorders
5 жыл бұрын
Mabbio Thanks for watching Mabbio! We have seen this in the past. There will always be a small amount of water left over in your machine after each cycle however the water will not be visible to you. Water remaining in tub after cycle can be caused by a clogged Drain Hose not allowing all the water to exit washer. It’s also possible that your Drain Pump itself is wearing out & no longer strong enough to push all water out of Machine. We recommend checking your Drain Hose first. Below is a link to our video that we uploaded recently. Definitely check it out! kzitem.info/news/bejne/kppqz5mfnaCFfYY Keep us posted! Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@Mabbio01
5 жыл бұрын
@@DIYwithMichaelBorders wow thanks
@DIYwithMichaelBorders
5 жыл бұрын
Mabbio We are happy to help! 😎👍🔧🔩
@michaelm.8637
2 жыл бұрын
I have the same washing machine. My cycle gets to rinse then drains the water out and continues to make the drain noise. When it reaches the spin cycle, it sometimes will not spin and won’t wring out the clothes completely. So I wait about 30 minutes and put it on spin cycle and it will spin but my clothes are still soaking wet after the spin cycle finishes. Could this be due to a faulty timer?
@DIYwithMichaelBorders
2 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. Its definitely a possibility. We recommend replacing the lid switch first as it can also cause these symptoms. Replacing the lid switch first is the more cost friendly part. If that doesn’t fix it, the timer is the next part that will need to be replaced. Below is a link to our video showing replacement of lid switch. kzitem.info/news/bejne/kp6KuJdjmIKfg20 Keep us posted. 😎👍🔧🔩
@juntjoonunya9216
7 жыл бұрын
How do we know it's the timer?
@DIYwithMichaelBorders
7 жыл бұрын
Thanks for checking out the video. Great question! The Timer controls the “Cycle Flow” and continues to move the cycle through the steps. As the internal parts of the Timer begins to wear out...you see the washer stopping at either “Drain or Spin”... The Lid Switch also is a key part in the cycle...once you lower the Lid/door...you will hear a click. This click secures the electrical current and sends message to Timer to begin the Cycle. Also...once the cycle gets to the spin portion, the timer re-communicates with the lid switch to verify that the lid is closed for safety purposes...example: you do not want the washer to be spinning with a lid open...water will fly everywhere 😱 I recommend purchasing both the timer and the lid switch as they work together to move the washer through the cycle. To order parts, Go to: repairclinic.com Keep me posted! Please subscribe to the channel and turn on your KZitem notifications that would be awesome thanks again 😎👍
@carolynfitzgerald6654
2 жыл бұрын
What is wrong with a washing machine, when it's on rinse.and don't fill up all the way. And it sounds like a train, when it's washing .its very loud.
@cwegner516
Жыл бұрын
Mine drains but won’t spin until I change to ‘spin’. Then it will spin.
@DIYwithMichaelBorders
Жыл бұрын
Thanks for watching, have you replaced Lid Switch in the past? It might be as simple as that. Below is a link to our video showing the replacement process. kzitem.info/news/bejne/kp6KuJdjmIKfg20 If that doesn’t fix issue, it’s time to replace Timer. Please keep us posted. Hey also if you’re into crypto trading, join our newly launched DIY community ecosystem. Toolboxtoken.com We DIYers need to stick together! 🧰
@marktwo3160
2 жыл бұрын
So you just shot gunned the timer as being the problem? I mean did I miss the trouble shooting portion?
@lizGC055
4 жыл бұрын
Your intro is very loud but then I can’t hear your voice. Thanks for the tips.
@DIYwithMichaelBorders
4 жыл бұрын
Elle R Thanks for watching & we appreciate you reaching out to us. Glad to help! Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@leroyebron6132
4 жыл бұрын
@@DIYwithMichaelBorders P j.lo 7
@DIYwithMichaelBorders
4 жыл бұрын
leroy ebron Let us know if you have any questions. 😎👍🔧🔩
@BangarBob
Жыл бұрын
KENMORE WASHER TIMER PART #? SAME AS YOUR SHOWED ON THIS KZitem FOR TIMER REPLACEMENT AND LOCATION TO PURCHASE PLEASE HELP thanks
@DIYwithMichaelBorders
Жыл бұрын
Good morning, we are drinking our morning coffee answering any and all questions for the DIY community. We are grateful for you not only watching, but taking the time to share a comment. If interested in purchasing this part, visit our Amazon affiliate link below. amzn.to/3cjEqCY 😎👍🔧🔩
@BangarBob
Жыл бұрын
@@DIYwithMichaelBorders Top of the Morning and Gods Many Blessings during these Blessed Christmas Season. Amazon Part is not for my MODEL # 110.26844692 80 SERIES SERIAL # CH0903326. I spent hours but cannot find identical to your video, I believe ou worked on 70 or 90 series. I may be DUMB Please help
@DIYwithMichaelBorders
Жыл бұрын
@@BangarBob Thanks for the info, we will look asap! 😎👍
@DIYwithMichaelBorders
Жыл бұрын
@@BangarBob We are back with you!!!! Below is the Timer that should be the exact replacement match. www.searspartsdirect.com/product/442qojvkvl-0026-110/id-wp3951708 Looking forward to hearing back from you. We DIYers need to stick together! 😎👍
@asyen1
5 жыл бұрын
I have the same washing machine, what id the part no.???
@DIYwithMichaelBorders
5 жыл бұрын
Blessed by God Thanks for watching & reaching out to us! You will need to gain access to your model # which is inside. We recommend opening lid & you will see model number under lid toward upper portion of rear bowl. We purchase all appliance parts from: RepairClinic.com Enter your appliance model # into search window on website & you will be provided with all replacement parts for your specific appliance! Keep us posted with any questions you may have! Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@brookewitham2978
3 жыл бұрын
Where can I send a video of what my washer timer sounds like . I think it is the timer anyway?
@DIYwithMichaelBorders
3 жыл бұрын
Thanks for watching & is it making a nonstop unfriendly clicking sound? If yes, Timer will need to be replaced. Keep us posted. 😎👍🔧🔩
@brookewitham2978
3 жыл бұрын
@@DIYwithMichaelBorders It is more like a hum coming from the control panel area. Can I upload a video of the washer to you?
@DIYwithMichaelBorders
3 жыл бұрын
@@brookewitham2978 Thanks for the reply, if sound is definitely coming from Timer, it’s time to replace it. Chances are it’s in it’s early stages of failure. Keep us posted. 😎👍🔧🔩
@mclc432
4 жыл бұрын
by the way the washer model is 110.29882890
@HendrixZeron
5 жыл бұрын
Where do you buy the part.
@DIYwithMichaelBorders
5 жыл бұрын
#MEHZ110 HendrixTv Absolutely & thanks for watching & reaching out to us! We purchase all appliance parts from: RepairClinic.com Enter your appliance model # into search window on website & you will be provided with all replacement parts for your specific appliance! Keep us posted with any questions you may have! Please subscribe to the channel and turn on your KZitem notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@cristiansastree
4 жыл бұрын
Mine DRAINS but won’t fill water up again nor will it spin. Is this the same problem?
@DIYwithMichaelBorders
4 жыл бұрын
Cristian Sastré Thanks for watching & it’s almost always the cause. We always recommend replacing the Lid Switch as well as your Timer when either fails. Keep us posted. Please subscribe to the channel and Ring your KZitem Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Пікірлер: 498