great advice if you happen to have a perfectly square room, however back in the real world its better you do a chalk line in the center of the room because if the sides off the whole room will look out of wack
@hijinks21
5 жыл бұрын
shouldn't you do math first to make sure you don't end up with some thin board at the end? So you can trim the first row if needed
@spettro9
6 жыл бұрын
Very nice video! Thank you
@susanlivesay3262
29 күн бұрын
How do I get warranty
@ghesoonkarim602
Жыл бұрын
Questions what type of glue would you use for engineering bamboo flooring on stairs? Every article is different answer. Thank you for your help
@mostlikelywedoitservices9743
6 жыл бұрын
Isn't the tung a 1/4"? If so then put board to wall draw your mark at edge of tung. Wala!
@tommasonjr5930
7 жыл бұрын
do the brads have enough holding power to keep floor from squeaking a year or two down the road?
@customsurface4354
7 жыл бұрын
I understand your concern with the brad nails, however, in the past 10 years we have not had any problems with these fasteners. Most 18ga. brad nails will have have a ring shank top to help hold the nail into the bamboo and help prevent any possible noise from the floors in the future.
@sammyfrank4875
2 жыл бұрын
Yes it will squeak down the road and possibly buckle especially bamboo, you need to use 18g cleats not brad nails. Brad nails are used only at end down to blind nail.
Пікірлер: 11