Does your fly line have a loop on it? Try this method: kzitem.info/news/bejne/r6Cm3Jyjh4h9oX4
@Cordeneaux87
5 жыл бұрын
Does the FG knot work in this case too?
@ambersheffield4060
4 жыл бұрын
Can you guys please make a video how to make a leader
@dariuswhite2543
4 жыл бұрын
Having a problem with my dry flies dropping below the surface. I used a perfection knot and i did apply floatant to the fly and the line can the knot i used be to heavy
@vanderkb1
5 жыл бұрын
I can't get over the "Click" sound you use when Brian whips out those glasses... It gets better every time!
@Madriveroutfitters
5 жыл бұрын
Stay tuned. Should graduate to a full explosion soon.
@eddeupree8608
Жыл бұрын
I know I'm late to the party but....this was sooooo SOOOO much better than the loop to loop connection I use a paper clip for my stiffener and literally in 30 seconds had a new tapered leader.. now leaders are a non issue in the field.. thank you for this!
@Madriveroutfitters
Жыл бұрын
Thanks for watching.
@artemshvayger6865
Ай бұрын
thank you for this knot ! I've bought my first fly fishing set, and the Fly line as well the Fly leader both didn't have loops. I've spent around 5 hours trying to tie them together, finally, after hours I was able to tie them with your knot ! Thank you so much for this video !
@Madriveroutfitters
Ай бұрын
Thanks for watching and happy to help!
@michaeldominic3952
2 жыл бұрын
Best nail knot video. Until this video I didn't realise that you are pinching the End of the leader in the loop. 😊
@Madriveroutfitters
2 жыл бұрын
Thanks for watching!
@michaelogden5958
Жыл бұрын
Woo-Hoo!!! I've been messing with a Tie-Fast Knot Tyer for years. For me, it's been a crap shoot. I have spent a LOT of time fiddling with those knots and starting over. With this, first try was as "smooth as butter". Thanks!
@Madriveroutfitters
Жыл бұрын
Happy to help! "Like Butter".
@IrishFF187
5 жыл бұрын
Looking forward to the video on building leaders and the release of your book!
@Madriveroutfitters
5 жыл бұрын
Stay tuned and thanks for being here!!
@tracythomas3565
Ай бұрын
Old dyslexic me actually tied my leader onto my fly line using this knot. Also saw your vid about this knot with Flip. Thanks. I cut off the loop, lol.
@Madriveroutfitters
Ай бұрын
Thanks for being here!
@Koch-Locke
10 ай бұрын
Outstanding ! By far my most favorite knot !
@Madriveroutfitters
10 ай бұрын
Thanks for being here.
@Joseywales414
3 жыл бұрын
I’m a traditional fly fisher , haven’t fished in years but I’m back at it now. Fairly almost forgot how to tie some of the knots? Just weren’t exactly sure, this really helped. Thanks.
@Madriveroutfitters
3 жыл бұрын
Thanks for watching and please stay tuned.
@michaelb489
Жыл бұрын
Thank you for the help. I bass fish a lot but had been wanting to fly fish. So i got a gift card to bass pro and got a really nice combo for 125$ off. Your videos help a lot!
@Madriveroutfitters
Жыл бұрын
Thanks for watching. Hope you'll think of MRO when you need some flies, gear and accessories moving forward.
@brucehaley3651
5 жыл бұрын
Wow, what a colorful fly reel and line! Could see that from a mile away.
@Madriveroutfitters
5 жыл бұрын
Most important to be able to see the fly line. He loves the Orange when possible. Reel is just for looks.
@clausbech-petersen916
2 жыл бұрын
Excellent video. I have just used it to attach a tapered 12 foot trout leader that was threaded through the tip of the fly line to make a connection similar to the classic needle knot - and it worked wonders, even with the long and thin leader section I had to handle.
@Madriveroutfitters
2 жыл бұрын
Thanks for watching.
@OKCKettlebells
Жыл бұрын
Is this the butt section where you would typically use Maxima Ultra Green? Thanks!
@billp3598
3 жыл бұрын
Excellent video. I've worked out both ways to tie it, and I believe the end result is identical to the 'nail knot'. This is however a much easier way to tie it neatly and I like that it doesn't require a special tool that I can never seem to find :-)
@Madriveroutfitters
3 жыл бұрын
Well, you can find the tools at www.madriveroutfitters.com but they are pretty much the same knot. Thanks for watching.
@billp3598
3 жыл бұрын
@@Madriveroutfitters I meant I can't find the tool I already own. 😂 But thanks.
@mobow8823
2 жыл бұрын
Great teaching video on this knot. Just starting out in fly fishing and i'll be incorporating this knot moving forward. I also watched your series on flycasting. Great stuff! If any of you haven't watched that series yet and need some help on your casting, i highly recommend it.
@Madriveroutfitters
2 жыл бұрын
Thanks for watching and for the kind words of support. Please stay tuned!
@rodneygraham2447
3 ай бұрын
Never did care for loop to loop. Time to get this one down pat. Thank You!
@Madriveroutfitters
3 ай бұрын
Thanks for watching.
@jasonvenesky2438
2 ай бұрын
So freaking simple. I got away from fly fishing for years and forgot how to do some of these things. I really enjoy your videos and guests, especially the no BS approach to doing these things.
@Madriveroutfitters
2 ай бұрын
Thanks for being here!
@SuperNagz
5 жыл бұрын
Keen as mustard to get hold of your book, Brian!!!!!!!!!
@Madriveroutfitters
5 жыл бұрын
SuperNagz We are too! C’mon Brian....cough it up!!’
@angelvalentin8204
4 жыл бұрын
I’m starting in fly fishing and this video make my day, thank you!
@Madriveroutfitters
4 жыл бұрын
Thanks for watching.
@TheBeaker59
6 ай бұрын
Great instructional the knot lasts and lasts so much so that each time I have to do one I have to come back to your video as I have forgotten how since I last did one. Today it was a commercially made slip on loop that failed way out in a backcountry lake meaning I had to switch to spinning. 7 trout between 2 and 4 lb of which 2 spinning and the fish were taking my new design of cicada flies wish I could have fly fished all day.
@Madriveroutfitters
6 ай бұрын
Thanks for watching.
@lukemcfadyen284
5 жыл бұрын
Hi Brian, I'm pretty sure that 'Lather's Wire' is what in Canada we'd call Rebar wire. It's for tying the steel (rebar) in concrete together before a pour. Thanks for the great videos, I've learned a lot from you. Big fan of your work.
@Madriveroutfitters
5 жыл бұрын
Thanks for watching! We'll pass this on to him.
@BarryMcKee3906
5 жыл бұрын
Terrific instruction. I screwed up my first attempt as the leader was too short. I nailed, no pun intended, the second attempt and the third one. A short piece of stiff coat hanger works well as the "nail". Thanks!
@Madriveroutfitters
5 жыл бұрын
Excellent. Glad to help. A straightened paper clip works well also! Thanks for watching.
@nathankouris8491
5 жыл бұрын
Your channel had been so helpful. I was surprised with a fly rod for Christmas and I'm itching to get it and learn just waiting for this Cleveland weather to turn!
@Madriveroutfitters
5 жыл бұрын
Glad to help! Thanks for watching and stay tuned.
@Artisanwoodworks73
2 жыл бұрын
This is what I was missing! I thought you were wrapping with the left END. Thanks Brian.
@Madriveroutfitters
2 жыл бұрын
Thanks for watching.
@tracyandlewtaylor969
2 жыл бұрын
Thanks ,took a bit of practice but sorted. Cheers, Lew from New Zealand .
@Madriveroutfitters
2 жыл бұрын
Thanks for watching.
@portmccarthy
4 жыл бұрын
Thanks, MRO. My son was practicing casting in the yard without a leader on his line and he damaged the loop. I installed a new leader, minus the factory loop with your method. Works great
@Madriveroutfitters
4 жыл бұрын
Glad it helped. Make sure he doesn't do that anymore. MUST have a leader on there or the equation is not complete.
@thomasbrooks8112
2 жыл бұрын
For the last 12 to 15 years I've been using a slight variation of this that's called the needle knot. I was taught to me by Gary Sandstom, the owner of The Morning Hatch Fly Shop. Unfortunately Gary was forced to close this several years ago.😔 The needle knot uses a very small needle to make hole up through the center of the fly line for about 1 inch. Then I use a snell knot to permanently attach it to the fly line. I love this knot because there's no bump from the end of the fly line like you see with the nail knot. I really dislike that little bump as it goes through my guides when I'm landing a fish. I suppose I could use your snell knot and add just a very small amount of thick UV resin to smooth out that bump
@Madriveroutfitters
2 жыл бұрын
Thanks for watching and let us know if we can help.
@texasbluetick
5 жыл бұрын
Thanks for this tutorial! Was able to use an old wire hanger by snipping off a piece. Appreciate your videos!
@Madriveroutfitters
5 жыл бұрын
Perfect! Thanks for watching and please stay tuned.
@delmckinnon1574
4 жыл бұрын
Thanks! Have an 8 year old gearing up to toss the fur and feathers, great tutorial...My thanks
@Madriveroutfitters
4 жыл бұрын
Thanks for watching and please stay tuned.
@dong8307
2 жыл бұрын
Flip was a favorite to watch. Thanks for the video.
@Madriveroutfitters
2 жыл бұрын
Certainly a favorite of many. Thanks for watching.
@williamgoodmanmusic
Жыл бұрын
Thank you so much for this tutorial. I cannot wait to cut my loops off tonight!😂😆
@Madriveroutfitters
Жыл бұрын
Thanks for being here.
@user-kv6sk1eb7k
3 ай бұрын
I love it. this has helped me a lot.
@Madriveroutfitters
3 ай бұрын
Happy to help! Thanks for watching.
@garylee1544
2 жыл бұрын
SNAIL Knot ? Great Video as Alway's!
@Madriveroutfitters
2 жыл бұрын
Thanks for watching.
@SlowSubie1
2 жыл бұрын
thanks for this awesome video, for one whos just starting out on fly fishing this helped me so so much, thank you kind sir!
@Madriveroutfitters
2 жыл бұрын
Thanks so much for watching.
@bryazz
Ай бұрын
Thankyou. Very helpful. 😊 🙏
@Madriveroutfitters
Ай бұрын
Thanks for being here.
@bucolicbuffalo1027
5 жыл бұрын
Love the videos very informative keep them coming.
@Madriveroutfitters
5 жыл бұрын
Okay, we're on it! Stay tuned 🤙
@fabianvaras1273
Жыл бұрын
Thaks i learning a lot from you man good man . Tomorrow I'm headting back down to the mid Limay to the Patagonian Argentina go brown trout well see thanks for you help
@Madriveroutfitters
Жыл бұрын
Thanks for being here!
@dariomanfroi9447
3 жыл бұрын
As always an other great video. Very clear. I will try it because I understood also the clear explanation of Plip Pilot in an other video. Thank you very much
@Madriveroutfitters
3 жыл бұрын
Thanks for watching.
@paulcannell7188
Ай бұрын
😂you fly fishers are like folk singers, I learnt this one from Blind Mellon Chittlin while i was working my gap year down on McKinley’s Plantation.
@Madriveroutfitters
Ай бұрын
Always better with a good story.
@paulcannell7188
Ай бұрын
@@Madriveroutfitters absolutely :)
@jebar01
Жыл бұрын
Thank-You for all the information!
@Madriveroutfitters
Жыл бұрын
Thanks for watching.
@williamcornelison4721
5 ай бұрын
So now I have to watch this a half dozen times and practice.
@Madriveroutfitters
5 ай бұрын
Thanks for watching.
@puccini4530
2 жыл бұрын
Love it when he copies Kelly Gallop in snapping his spectacles together. Imitation is the sincerest form of flattery.
@Madriveroutfitters
2 жыл бұрын
Thanks for watching. Kelly originally showed these glasses to him many years ago.
@landonkatello7112
2 жыл бұрын
Great video I'm going to try this later tonight!
@Madriveroutfitters
2 жыл бұрын
Thanks for watching.
@thehomelessrat
Жыл бұрын
Thank you , this is the video I’ve been looking for for ages. All the best.
@Madriveroutfitters
Жыл бұрын
Thanks for watching.
@normanvazquez9372
5 жыл бұрын
Thank you for this video. It has helped me out A LOT. It was very confusing at first. After I watched it about five times and practiced with a non important piece of fishing string I mastered it! All thanks to you!
@Madriveroutfitters
5 жыл бұрын
Thanks for being here. Happy to help.
@dmk5n1
2 жыл бұрын
Thank you for this.This is the best way for me. I use an Allen Wrench from a Yakima rack and it performs nicely as a stiffener. They are everywhere in your tool kits too.
@Madriveroutfitters
2 жыл бұрын
Nice!
@dmk5n1
2 жыл бұрын
@@Madriveroutfitters Question: Do you ever do an Albright knot to connect leader to fly? It's not on youtube anywhere. Seems like a solid connection...
@Madriveroutfitters
2 жыл бұрын
@@dmk5n1 Never. That knot is for two lines….of unlike diameters. Only.
@dmk5n1
2 жыл бұрын
@@Madriveroutfitters My mistake was a typo. It should have read fly-line... Do you ever connect leader to fly-line with an Albright knot
@Madriveroutfitters
2 жыл бұрын
@@dmk5n1 Not either. That doubles up the line just like a loop. Way too heavy.
@robertgreene8933
2 жыл бұрын
Just tied it! Thank you for the tutorial!
@Madriveroutfitters
2 жыл бұрын
Thanks for watching.
@alanluscombe8a553
2 жыл бұрын
I definitely need to practice my knot skills. It is the most frustrating part of fishing to me
@Madriveroutfitters
2 жыл бұрын
Practice at home so that it is second nature on the water.
@trevnutz155
3 жыл бұрын
I'm here because a 4' gar ripped the factory tied nail knot off my fly line :o hopefully this knot holds better!
@Madriveroutfitters
3 жыл бұрын
Factories don't tie very good knots. This should work for you.
@reinaldoiturrino1853
2 жыл бұрын
Thanks for the lesson
@Madriveroutfitters
2 жыл бұрын
Appreciate you watching.
@ronwikeheiser6706
4 жыл бұрын
Thanks for making life so much easier lol cheers l do like this knot especially since l am getting older and a easier knot when your eye sight goes lol
@Madriveroutfitters
4 жыл бұрын
Thanks for watching.
@Chuck_Carolina
4 жыл бұрын
I used a nail not back in my day, but that is pretty slick. That is a perfect connection. Looks so much easier to tie too. I used a the red plastic tubes from a WD-40 can to tie my knots; cant pull on my denters like that thou, but I still know mermaids.....
@Madriveroutfitters
4 жыл бұрын
Thanks for watching!!
@LP-gs3xj
5 жыл бұрын
Gotta get a pair of those glasses if they can be bought as readers/magnifying glasses. My 64 year old eyes need the help
@Madriveroutfitters
5 жыл бұрын
Here you go: www.madriveroutfitters.com/m-45-clic-goggle.aspx
@hardrockminer-50
4 жыл бұрын
I've seen these magnetic glasses all over Latin America. Never have been able to find any in the USA.
@marksleeper3752
5 жыл бұрын
Great vid
@Madriveroutfitters
5 жыл бұрын
Thanks a ton for watching! Stay tuned.
@gabmik38
3 жыл бұрын
Awesome demo
@Madriveroutfitters
3 жыл бұрын
Thanks for watching.
@ianwatters5613
3 жыл бұрын
Great video , now to remove all those welded loops off my lines 😉
@Madriveroutfitters
3 жыл бұрын
Thanks for watching.
@ChrisUong.English
Ай бұрын
IF you're a rookie, don’t cut the loop. if you you been fishing for years and years, time to advance and cut the loop.
@Madriveroutfitters
Ай бұрын
Thanks for watching.
@nbe386
2 жыл бұрын
Lathers use wire to build structural frameworks for plaster, stucco, and other materials, to create lath.
@Madriveroutfitters
2 жыл бұрын
Thanks for sharing. We pretty much use paperclips these days though.
@macgyver5108
Жыл бұрын
Sometimes I like having a little "fun" with big box store fishing staff... I'll wander into the fishing section and zero in on one of the 20 year old guppies working that counter, and then with a dead serious face tell them "Take me to your _leader!"_ and THEN watch the cogs behind their eyes skip or break a few teeth while they try to process that! - "My what???" 😁😅 "You DO sell fishing line here right?"😂
@Madriveroutfitters
Жыл бұрын
That is AWESOME! Gonna have to try that one. Thanks for sharing.
@JohnDrach
Жыл бұрын
Would love to get my hands on a book about making my own leaders
@Madriveroutfitters
Жыл бұрын
Stay tuned!
@michaelsheilabenner7231
Жыл бұрын
Thank you
@Madriveroutfitters
Жыл бұрын
Thanks for watching!
@TheArby13
5 жыл бұрын
Brian, have you ever seen a lathed wall? The lathe is the 1/4' thick X 2" wood strips that are wired together. Plaster or cement is held in place by the wired strips of wood. Sound familiar now? : )
@Madriveroutfitters
5 жыл бұрын
Ron- if you send this directly to Brian via e-mail he will answer you there. He doesn't come around here often. Thanks
@danielippoliti5865
4 жыл бұрын
Lathers wire is used to tie steel for reinforced concrete
@jordintyler711
Жыл бұрын
thank you
@Madriveroutfitters
Жыл бұрын
Thanks for watching.
@sultanofswingcos
4 жыл бұрын
Love the videos, in fact all your series. I've tied the mono loop to my fly line with the nail knot and added the perfection loop. I then connected the leader loop to the perfection loop as per you other video (correctly). However there seems to be some play, 1/8 inch in the loops. I wonder how or if this will impact setting the hook. Can't wait for the store to come online again, I need a 9' 5wt 😉 for my son. I did get a small order in just before you guys went offline. THANKS for getting it to me. Be safe - stay healthy.
@Madriveroutfitters
4 жыл бұрын
Thanks for being here. Looks like things are clearing up and they should be back mid-day on 4/6/20. We'll let you know. Stay tuned.
@morefiction3264
Жыл бұрын
"Lathers build structural frameworks for plaster and other materials, creating such wonders as theme park attractions and ornamental ceilings. While lathers once worked with wooden strips called lath, they now mostly employ _wire_ and metal mesh to create structures of various shapes."
@Madriveroutfitters
Жыл бұрын
Thanks for sharing!
@user-kp1ei7mn3x
2 жыл бұрын
I got it!
@Madriveroutfitters
2 жыл бұрын
Thanks for watching.
@andykjohnsonjohnson7622
5 жыл бұрын
Nice👌
@Madriveroutfitters
5 жыл бұрын
Andy K Johnson Johnson Thanks for watching!!!
@macgyver5108
Жыл бұрын
A Snell knot is a type of hitch knot (x 5) and as they say "Two half hitches will hold the Devil!"
@Madriveroutfitters
Жыл бұрын
Thanks for watching.
@3runjosh
4 ай бұрын
interesting and thanks. Good to know that your butt section will last seasons because I don't like the idea of constantly trimming the tag end of the fly line each time you nail knot a leader on that would be an expensive knot.
@Madriveroutfitters
4 ай бұрын
The butt NEVER changes! Thanks for watching.
@mikedameron602
5 жыл бұрын
so, if using a tapered leader you'd use the tippit end and pull that out??? or, use a short piece of 1X then tie the tapered leader to that??
@Madriveroutfitters
5 жыл бұрын
Mike Dameron Yes, you would pull the tippet out. IX would be WAY too thin to use as a connector.
@chappychap7447
4 жыл бұрын
I am struggling with this a lot, I am getting a loop forming on the back end along with the tag end that I’m supposed to pull on to tighten, but that isn’t shown in the video, what happens to that loop? Is it covered up when you wrap the line?
@Madriveroutfitters
4 жыл бұрын
Thanks for watching but best to send questions to Brian directly through the shop. He'll be happy to assist.
@keithford8157
Жыл бұрын
I’m working with tapered leader. Is it the thin end of the leader that gets wrapped around 7-10 times? Or, is it the thick end that gets wrapped. It seems to me like the thick end should be wrapped so that the thickest end is knotted to the thick fly line. This one has thrown me for a loop (pun intended)! Thank you for your help! Beginner fly fisher here!
@Madriveroutfitters
Жыл бұрын
Please send your questions directly to Brian at the shop and he’ll be happy to help. You can email him or call him. He doesn’t monitor here but of course does there every day. Thanks!
@fisherman_rue2403
5 жыл бұрын
Since you did mention that the butt section would be there for a loooong time. Once the butt section is tied on, how do you connect your leader and then change out leaders with that setup?
@Madriveroutfitters
5 жыл бұрын
Nail knots to the mid sections and tippet. With this system there is no need to "change out" leaders. Stay tuned though as much more to come on this.
@Carson.Cannon
4 жыл бұрын
I’m super ready for the book.. do we have an idea of when that will be released?
@Madriveroutfitters
4 жыл бұрын
Sorry but it got put on hold here with the move/pandemic. You'd have to check with him directly on his plans at this point.
@mloaizasaez
3 жыл бұрын
very good, thank you very much, but I have a doubt since every time the leader changes I have to cut a piece of the line ... 🤔 Best regards from 🇨🇱
@Madriveroutfitters
3 жыл бұрын
With this method you would rarely if ever change the leader. The butt section will remain constant and you will change mid sections and tippets. Hope that helps.
@laulbad
3 жыл бұрын
Thanks! great Tutorial! You have great pliers! what brand are they?
@Madriveroutfitters
3 жыл бұрын
Thanks for watching. Not sure exactly but he is usually using his Manely Pliers.
@stephenohki7276
2 жыл бұрын
Great technique. I might have missed it in the comments but if you are setting up for tarpon or GT, how many wraps and what strength butt section do you recommend.
@Madriveroutfitters
2 жыл бұрын
Thanks for watching. Please send your question over to Brian at the shop and he’ll be happy to help. Email him is fine or you can call.
@fkylw
4 жыл бұрын
I like this knot but I think Blood Knot is easier, faster, and straighter (less likely to catch on guide loops).
@Madriveroutfitters
4 жыл бұрын
Blood knot for attaching a leader to a fly line? Bad idea.
@srwven
2 жыл бұрын
I'm assuming if you are building a leader, you do this with the butt section prior to adding on the mid and tippet, as those knots wouldn't pull through?
@Madriveroutfitters
2 жыл бұрын
That is correct. Give a shout or an e-mail to the shop if any further questions and thanks for watching.
@mikecrook8650
5 жыл бұрын
Just curious what type of fly line is that. It's hard to find brighter colors like that.
@Madriveroutfitters
5 жыл бұрын
Mike Crook Flip Sight Line by Cortland. www.madriveroutfitters.com/p-14733-cortland-hi-vis-flip-pallot-fly-line.aspx
@coreyjbeats1357
4 жыл бұрын
I know that this knot has worked for you for many years, but I was wondering if the knot would slip at all because there's nothing to stop the line from sliding through (as opposed to something like a double uni where one knot is stopped by the other knot). I don't know if that made much sense, but I would appreciate it to get your thoughts on this. Thanks, Brian!
@coreyjbeats1357
4 жыл бұрын
Oops, I'll email ahhaa
@Madriveroutfitters
4 жыл бұрын
Always best.
@paddy5421
2 жыл бұрын
Would this method be ok on a mono core sinker or would it end up stripping the coating and losing purchase, nice video, very well explained.
@Madriveroutfitters
2 жыл бұрын
We do it on all types of lines. No problems.
@paddy5421
2 жыл бұрын
@@Madriveroutfitters good to hear, thanks for getting back..
@andreiocneanu7788
5 жыл бұрын
Hey there! Nice channel, good advices! On this knot now, I’ve tried it before, but 1. I was unable every time to remove the wire without messing the knot and 2. I realized that it usually sinks the coils of the leader into the fly line’s outer layer, messing it up I found that the Albright knot works better...I’m using Albright knot to make leaders from ever decreasing diameter of mono (tapering it). Yet I dislike the knots bulkiness. Would you recommend those knots for #3-5, or you would go for loops? Regards!
@Madriveroutfitters
5 жыл бұрын
Andrei Ocneanu We use this knot to attach to line and blood knots for the rest.
@Madriveroutfitters
5 жыл бұрын
You actually WANT it to dig into the coating on the fly line. That's how it grabs and holds tight.
@gs6810
2 жыл бұрын
How do you make the leaders from there? Add two more progressively thinner sections with surgeons knots?
@Madriveroutfitters
2 жыл бұрын
Please contact the shop directly with your questions and they will be happy to help. Send an e-mail or give them a call. Thanks.
@goswo
2 жыл бұрын
This is so helpfull. Hope you can help with one question. The diameter of the flyline and the diameter of the leader/butt are they supposed to be the same? Thanks a lot….
@Madriveroutfitters
2 жыл бұрын
Thanks for watching. No, they are not. Feel free to contact Brian at the shop if you have any further questions.
@goswo
2 жыл бұрын
@@Madriveroutfitters thanks!!
@edwardatiyeh4641
5 жыл бұрын
I am new to fly fishing, your videos are excellent. I want to replace the leader, how do you remove a nail knot from the fly line?
@Madriveroutfitters
5 жыл бұрын
Thanks for watching. You cut it off with nippers or pliers. Simple.
@niltonc.7333
3 жыл бұрын
Thanks nice Video - is it correct to assume that a knot like that transfers the energy of the fly line during casting better than loop to loop?
@Madriveroutfitters
3 жыл бұрын
That is absolutely correct. Thanks for watching.
@ristics4690
4 жыл бұрын
Thanks for the vid-why should I use a nail knot before a surgeons knot when attaching two ends of two different lines?
@Madriveroutfitters
4 жыл бұрын
ristics4 Nail knot for attaching leader to fly line or backing to fly line only. Surgeons or blood knot for mono to mono. E-mail or call the shop if any further questions.
@LivingDTLV
4 жыл бұрын
Would an FG knot work for this? It's very similar to nail but I've only seen FG for braided line to mono. Same idea though, main line gripping leader line.
@Madriveroutfitters
4 жыл бұрын
Jason Clark Not familiar sorry.
@macreefs
3 жыл бұрын
I don't think it would because the fly line is so thick it would not dig into the flurocarbon as is needed with an fg knot
@hayteren
9 ай бұрын
Wow. Watch number 10 and I still have it completely wrong. I guess I'm the problem because others seem to be getting it. Anyway, you're welcome for all the views.😂
@hayteren
9 ай бұрын
Maybe a version of this video with colored thread and the B camera stays on the knot the whole time
@Madriveroutfitters
9 ай бұрын
Thanks for watching and feel free to call the shop with questions....they may be able to help.
@Jeff-gu6nb
3 ай бұрын
@@hayterenare you trying to tie a full leader onto your line?
@italiantroutaholic8926
4 жыл бұрын
let me ask / back 50 or so years ago . did they have the line we do today or did they have a 1 basic line and used that for both dry and wet flies??. they where more frugal back then as what we are now as a people in America .
@Madriveroutfitters
4 жыл бұрын
Sounds like a great question for the shop. Send over to them at admin@madriveroutfitters.com and they will answer you there.
@terred999
4 жыл бұрын
that's awesome! its the way forward... disregard my comment on the other video
@Madriveroutfitters
4 жыл бұрын
Will do. Thanks.
@fla5hpointstudios638
Жыл бұрын
Ive searched for the "The end of the line" book you've mentioned and i cant find it.
@Madriveroutfitters
Жыл бұрын
Stay tuned.....
@kimboslice8058
4 жыл бұрын
Should you put glue on the fly line after you cut it? Heard people say water gets in and makes sink?
@Madriveroutfitters
4 жыл бұрын
Not necessary. As Flip says, this knot seals it up tight. You can if you want though.
@kimboslice8058
4 жыл бұрын
@@Madriveroutfitters Appreciate it, love the videos here from CO. Cheers
@Jeff-gu6nb
Жыл бұрын
I've been using this method to cut off the loops on my leaders and attach them this way. Is that fine?
@Madriveroutfitters
Жыл бұрын
As stated, yes. Thanks for watching.
@KevOnTheBus
5 жыл бұрын
I’ve had nail knots pull the coating off the fly line and fail...maybe I’m not tying the knot correctly?
@Madriveroutfitters
5 жыл бұрын
Kevin Paige Try this method and your troubles will be over.
@ericenglish8720
5 жыл бұрын
I've had the same problem on some Rio Bonefish lines and some Orvis trout lines, usually after a few seasons and the fly line coating seems to soften from use, sun, sunscreen, bug repellant, etc. I have been tying this knot for a season and I don't think big trout or bonefish can put enough strain to pull the coating off the line. You might be using too much force when tightening. Fly line cores are only 30-35 lb test so drop down to 20 lb of test force. See if you can get some twenty lb line and see what it takes to break it or get a hand scale. I know that Skip Pallot and these guys swear by this knot and I'm trying to believe them, but some fly line coatings can't tolerate large longitudinal forces. I've gone to Airflo lines for bonefish which have a urethane fly line coating which is sunscreen and bug repellant resistant.
@lmallard3788
2 жыл бұрын
Looks like a nail knot. It’s been a while since I tied mononofilament to my fly lines, but when I did, I wet the knot to keep the friction heat reduced.
@Madriveroutfitters
2 жыл бұрын
Thanks for watching.
@gerald5646
5 жыл бұрын
Every time I start wrapping the loop around the wire, the fly line start to wrap behind my thumb and forefinger. Is there a reason this happens?
@Madriveroutfitters
5 жыл бұрын
Gerald Give Brian a call at the shop and maybe he can help. 614-451-0363. We’ll tell him to look for the call.
@phardiman84
4 жыл бұрын
I used a nail knot - didn't know about this version of it. Is a nail knot still fine for attaching a leader to fly line? I used the surgeons knot to attach tippet to leader.
@Madriveroutfitters
4 жыл бұрын
Yes, a nail knot does the same thing. Thanks for watching.
@josephronan5049
3 жыл бұрын
Does that knot run through the top guide or guides smoothly when dry flying
Пікірлер: 356