I'm back and have a bunch of new videos lined up, starting off with this! NDI is a technology that is changing the game when it comes to broadcasting... so If you've never heard of it before, I hope this video has been useful for you!
@thatboycon5536
9 ай бұрын
can you connect to the atem extreme iso a wireless camera using the Atomos Connect with NDI? if So, how would you go about achieving this?
@clifftoonferares6688
Ай бұрын
In the future, remember, bullet points and graphics. Your content is excessive with talking. Your voice and speed of speech is excellent. Keep up the good work.
@GuiSchwertner
3 жыл бұрын
You're absolutely calm for a guy with so many redbulls around.
@guitarguts666
3 жыл бұрын
🤣🤣🤣🤣
@JonathanOBrien-fw9ie
Жыл бұрын
Great into to NDI - Have been wrestling with a NDI set up trying to get cameras connected to an ATEM and this really helped. I now get it. Great work.
@MarioDanielforlife
2 жыл бұрын
Is there a company out there paying people to dislike videos? That would be the only explanation for the 9 dislikes on this video. Great video. I've been doing NDI research today for about 6 hours. I think all my previous 6 hours were wasted. Great video! No misleading title! I've learned more than those clickbaiting videos out there. I know have an idea of what I need for my 4 cams setup project.
@lgf30022
3 жыл бұрын
Thanks for the overview. I wonder if the ATEM will get a software update to have NDI built-in. It would be nice to be able to select NDI sources and/or send ATEM output encoded to NDI. Less cabling would be nice! Of course, that may entail a new model with some extra hardware to support it.
@sovereignmedia1885
Жыл бұрын
Nope. BMD and Newtek aren't friends, which is why BMD does there own remote protocol.
@ECHOESBYFUTURE10
3 жыл бұрын
The master is back ... we've been using this NDI systems with OBS since the early pandemic days it's been amazing for our streams. This BirdDogs system looks amazing.
@AlexPettitt
3 жыл бұрын
Glad to hear you've been experimenting with NDI, it's really great isnt it!
@erik.landen
2 жыл бұрын
Thanks for a great walk-through, now I will skip HDMI over IP and go NDI for our stream setup! Keep it up!
@ropeadope99
3 жыл бұрын
For everyone here, I spent the $ for an hour with this cat and it was brilliant.
@pbelb
3 жыл бұрын
I appreciate the utility of the individual NDI adapters for remote single camera/output situations, but, when you need *multiple*, such as: at the video switch end, wouldn't it be more cost-effective to use an older PC with multi-port IO card and perhaps multiple network connections as the bridge between the video switch (assuming not NDI capable, of course) and NDI sources? That way, your NDI-bridging computer can also switch between multiple network sources, to make the most out of the physical connections to the video switch that you have available.
@lastsonofthewest2444
3 жыл бұрын
That was a phenomenal video, and encouraged me to purchase my first BirdDog product, the 4k Flex encoder. Will feed my Canon Xf405 in glorious 4k 60 through it, capturing across my home MicroTik 10GbE network, on to my vMIX Pro beast machine. For $399 USD, I will get much of what a good Epiphan or Magewell capture card provides, but thanks to the magic of multi-mode fiber, I get it anywhere in my home I need it! Love it, danke!
@Superb_Mario
3 жыл бұрын
Thank you for all the extremely helpful content! I am setting up a multicamera livestream with the ATEM Mini Pro at the core of the operations and your videos have been invaluable.
@AlexPettitt
3 жыл бұрын
Thanks Mario, I'm really glad to hear the videos have been helping! Good luck with your setup :)
@GabrielTobing
Жыл бұрын
Ty so much for this This is gonna be so awesome to use in a dual PC streaming setup because VRChat causes crashes that can freeze the entire computer, so this is super useful!
@willianaleman6114
2 жыл бұрын
Hi Alex, I'm probably late for the party. Regarding your question about the differences in color between the two devices. This is caused by one device been by the default set to Video Range and the second one to Full Range. To solve this discrepancy one of the devices can be changed from one video range into another to match each other. This is true if they have support to change between video range levels setting in the hardware or through software. Most video consumer monitors ,TVs and other video devices expect Video Range, while professional devices and software, like DaVinci Resolve supports both.
@skakbornholm7584
3 жыл бұрын
wonderful you are back, I have almost gone and been worried about you
@ProCopyAustralia1
3 жыл бұрын
Good to see you back Alex
@AlexPettitt
3 жыл бұрын
Good to be back :) Thanks for the suppport!
@ALSNewsNow
3 жыл бұрын
NDI made NewTek Tricaster FILTHY RICH. It is truly "all that" and more. This is a perfect demo for LATENCY....3 frames is about exactly the maximum that is acceptable for LIVE IMAG. This is why NDI has become SO useful in the pro LIVE A/V production world. Also, it's why even the "best" HDMI capture cards are not quite good enough for production. Almost all HDMI captures add at least 5-10 frames of delay at the minimum, plenty enough to piss off an average corporate client for bad lip sync delay on the video screens with HDMI and say, an ELGATO. NDI is MAGIC
@WorldMusicCompetition
3 жыл бұрын
We also use these excellent Birddog products. We hope to see this technology integrated in BMD.
@GillmanAudio
3 жыл бұрын
Superb video juts got my Atem MINI Pro ISO, thanks for the efforts and info I have learnt a lot. from you .
@dickstarrbuck
6 ай бұрын
wow, this is 3 year old tech, why am I just finding out about it now? im amazed.
@MechanismBasics
3 жыл бұрын
Yay! Another rabbit hole. Great stuff though and thanks for the explanation.
@AlexPettitt
3 жыл бұрын
Haha I know how you feed re rabbit hole, I feel like I have taken a deep dive into NDI over the last few months...but it’s been great :)
@MechanismBasics
3 жыл бұрын
@@AlexPettitt Mate, I'm teaching online Chemistry classes at a Uni in the US through Zoom (I'm from the UK) and your videos have been invaluable in making it work. Most of my colleagues are still yelling at a dodgy laptop camera, and wondering why their students don't show up for lectures, while I'm using the ATEM mini and getting 95% attendance. Thanks for the clear explanations.
@AlexPettitt
3 жыл бұрын
@@MechanismBasics This is so awesome to hear! Good quality is just as important as good content 👍
@jeromem8654
3 жыл бұрын
watching from Philippines.. Great product.
@AlexPettitt
3 жыл бұрын
Thanks for watching! Really glad you found the video useful :)
@Fraktiv
3 жыл бұрын
Hey Alex, the colour shift could be to do with the RGB vs YUV settings in the Birddog control panel and/or either only being partial range on one end, full range on the other, hence range scaling. I've seen similar shifts with the ATEM MP when hooking up RGB/YUV selectable graphics outputs from OBS over HDMI. Nice NDI primer too!
@pupu4234123
3 жыл бұрын
Please tell me more about NDI Streaming Solutions. I want to setup a Video Studio with complete NDI Workflow :)
@danaforeman4349
2 жыл бұрын
Another great video Alex. Keep it rolling.
@Teach2Build
Жыл бұрын
Mind. Blown. Thanks.
@Music4HimNow
3 жыл бұрын
Happy Birthday Alex! Wishing you the best! 🎂❤🙏
@AlexPettitt
3 жыл бұрын
Thanks Mark, I really appreciate it!
@Music4HimNow
3 жыл бұрын
@@AlexPettitt I've always appreciated you through the years. Thanks for always replying and the acknowledgment. ❤🙏Mark
@BirdDogAustralia
3 жыл бұрын
Love this, thank you Alex!!
@AlexPettitt
3 жыл бұрын
Glad you like it! I massively enjoyed testing out the converters :) How about your NDI camera's next? ;)
@BirdDogAustralia
3 жыл бұрын
@@AlexPettitt sounds like a great idea - let's make it happen!
@theelvisphoto
3 жыл бұрын
Thanks for great content as always. NDI is a dream, if it worked realiably. I have used it to send a feed to a computer using NDI Virtual Display and that crashed occasionally (maybe should have received using OBS instead and then had OBS do the virtual camera), and also tried Skype and Teams with NDI enabled, but then audio goes out of sync when there are more than one person in the meeting. Hopefully, NDI and its implementations will mature soon.
@GoldenTeeTV
2 жыл бұрын
NDI is very solid if implemented correctly. unfortunately some 3rd party encoders and decoders about a year or so ago had issues with illigal signals being pased that would shut down the host. OBS also had a bad implementation but i never used it much in production so not sure if it was resolved. But where people would have the most issues is not setting up a proper network. Marketing material preaches how easy NDI can be implemented over existing networks but unless your switch and router is layer 2-3 and managed and allows you to configure mDNS and VLANs the network load can cause problems. Especially the OBS NDI plugin back in the day. If you still had those issues just using NDI studio then look at your network and the load. You'll be amazed how quick cheap network cards and switches will show their ugly little head when NDI or any AV IP is being used. Plus i think the virtual camera had its own issues. As i'm typing this i see your response was a year ago so i'm sure thatw as it.
@nicko5566
3 жыл бұрын
Nice product. I was looking at it for my application. Having seen you put this into action provides more insight on my application. Thanks for the video as always!
@AlexPettitt
3 жыл бұрын
Glad it was helpful! Let me know if you have any specific questions about any of them and I'll do my best to answer
@BurninSven1
3 жыл бұрын
What the first example is for beats me but there is an audio delay probably cause of all that hardware hooked up together
@Graham_Rule
3 жыл бұрын
You said the only limitation was network speed. I was wondering about network topology. Do all the NDI systems need to be on the same network segment? Is discovery done by ARP or some other method? And finally, can the protocol be routed between networks (accepting a possible loss of speed)?
@updootIreland
3 жыл бұрын
Would it work to have 2 Birddog Minis? One to encode a camera to NDI and the 2nd to decode it for the ATEM HDMI input, rather than using a Mini and a Flex 4k?
@jacvanderspuy5618
3 жыл бұрын
Great solution if your camera has no SDI port and you need to take the feed for 100's of meters
@Holdannews
3 жыл бұрын
Super informative video Alex, great work!
@AlexPettitt
3 жыл бұрын
Thanks guys! And thanks again for getting them out to me so quickly 🙌
@helgedell
Жыл бұрын
Great video. I might be dumb, or not paid enough attention...but how to send three signals (video signal and sound, ptz-commands and talkback) into one ethernet port on the sender side of the production?
@MixMeMcGee
3 жыл бұрын
Great summary of this :)
@ceecrb1
Жыл бұрын
0:25 not sure about "broadcast quality" but yes good enough.
@thisiscentralcontrol
3 жыл бұрын
Fantastic video
@AlexPettitt
3 жыл бұрын
Thanks Joe, I hope you found it useful 👍
@datarecoverysweden
3 жыл бұрын
Thank you for the upload.
@joseph-israel
Жыл бұрын
Hello Alex Pettitt, can look make a review on the Satella ViZion - SP8 ?
@OVHS
8 ай бұрын
So...I cannot get any tally information or talkback when the decoder is connected into the Atem Mini?
@kipling1957
3 жыл бұрын
Alex, you appear to be morphing into Max Cady, as portrayed by Robert DeNiro in Cape Fear. Just need the tats now.
@Snipersounds
3 жыл бұрын
Wow! Thanks Alex! Great video!
@ImagePlay1
3 жыл бұрын
Good info Alex.
@AlexPettitt
3 жыл бұрын
Really glad it was helpful! :)
@brianpimental2948
2 жыл бұрын
How can I do Wireless NDI to HDMI? I need to be able to control everything from a Crestron type system
@DAVEDigitalandVinylExpert
3 жыл бұрын
Great vid as always. Thanks. Will be checking out the birddog
@guitarguts666
3 жыл бұрын
So couple things since I'm a dealer for BD. You never mentioned the devices are POE. And when you dumped NDI into OBS off the split you never brought in your audio mix.
@SonOfAdam94
3 жыл бұрын
Your comment got me curious. What does POE stand for, and could expand a bit on the workflow issue related to it? Thanks.
@AaronAbernethy
3 жыл бұрын
@@SonOfAdam94 PoE is ‘Power over Ethernet’ - it means the device can be powered using just the Ethernet cable as long as its connected to a PoE enabled switch.
@SonOfAdam94
3 жыл бұрын
@@AaronAbernethy Thanks for that.
@infocusmultimedia21
3 жыл бұрын
Nice video again Alex
@AlexPettitt
3 жыл бұрын
Glad you enjoyed :)
@PsychiatryonlineITA1
3 жыл бұрын
well but how to send skype to ATEM MINI in particular HOW TO SEND NOT ONLY ONE SKYPE CONNECTION but as it happens with OBS is it possible to send to ATEM MINI PRO separate NDI connections in oder to allow me to have in my streaming also remote partecipants?
@BillTorelli
2 жыл бұрын
Can you pair up a remote BirdDog Mini connected to camera via the internet to a local BirdDog Mini connected to an ATEM Mini Extreme ISO. I suspect you would need to open port 5961 (?) on your router to allow the connection.
@danm7596
Ай бұрын
great intro. thanks
@nicolamennino7601
3 жыл бұрын
Thanks @Alex for the video ! I wanted to have a review of the birddog products and it is great ! Have you tried the P200 ? Also, I have a question. In OBS, when you layout your output with ndi. Does it also embed sound ? Thanks a lot !
@AlexPettitt
3 жыл бұрын
Hi Nicola, I'm glad the review/demo was helpful! I haven't tried the P200 yet, but that will be my next adventure with BirdDog products...definitely keen to try out some of their cameras! And yes, the NDI feed is both audio and video, so both carry into OBS :)
@AlexPettitt
3 жыл бұрын
@@sophiagenetics844 Ohhh, yes, the NDI Program output from NDI carries sound as demonstrated at 9:58 (Note:NDI output from individual scenes using the filter does not though).
@RyanZiegler
2 жыл бұрын
Do they make something, that works if the camera doesn't have access to Ethernet?
@WernerPuchert
3 жыл бұрын
Great intro mate. Thank you
@AlexPettitt
3 жыл бұрын
Thanks Werner, appreciate it :£
@kayleydavis1229
2 жыл бұрын
I live stream sports and use an atem mini pro and obs. I want to find a way to be able to add graphics with obs without the live streaming being dependent on my laptop and obs so that if my laptop crashes the live stream will stay on air via the atem mini pro and the only thing I lose is the graphics until I’m able to get my laptop running again. I ran into a problem where my laptop randomly restarted itself the other day in the middle of the live stream therefore the live stream stopped on KZitem since it’s my laptop that’s putting out the livestream, not the atem mini pro. Thank you in advance!
@markbraverman4299
3 жыл бұрын
Hi Alex, Just a quick comment on your NDI demo when thier was a brightness change when you switched inputs. Perhaps this has to do with the Black level? Are you at 0 Black or 7.5.Can you change settings in the Birddog controller? Blackmagic should update thier software to include the capability of receiving NDI. I built an Atem mini pro 6U fly pack with monitoring,etc and using the Atem bridge. Your demo’s are priceless keep up the good work.
@AlexPettitt
3 жыл бұрын
Thanks Mark! I didn't adjust the colour settings, but I also didn't go in and check them before hand. I only really noticed the difference once I came to the edit. And yes, would love to see NDI brought natively to the ATEM line personally...but I don't see it happening (it's technically from a competitor and there are other IP based protocols out there that BM could use). Will keep the fingers crossed though :)
@marcossalinas2914
3 жыл бұрын
Mark, very curious to see pics of your ATEM flypack build. Do you have a video on here, or pics posted somewhere? I’m building similar with a bank of raspberry pi’s and mini encoders, but still designing on paper at this point.
@markbraverman4299
3 жыл бұрын
@@marcossalinas2914 Hi Marcos, I can send you a picture of my Atem fly pack and what I have done so far. Where should I send it to? I’m new to this forum and have to subscribe to Alex’s posts which are excellent and so straightforward.
@markbraverman4299
3 жыл бұрын
@@marcossalinas2914 Hi Marcos, If you can send me your email I can send you my pictures on my fly pack. I am interested in what you may do with raspberry pi’s etc. I am recording to a drive and have the multi-view monitored. I am using a small router and the Atem Bridge for my Program monitor. The Atem mini Pro and small Yamaha audio mixer are on a small pull out drawer. Everything is pre-wired. On the back is a furman power supply and a 1U connector panel for Video,audio,etc. Internally I have hdmi to sdi and sdi to hdmi converters that breakout to the connector panel. I am currently using a MacBook Pro for Atem software and to get graphics into the system. I also have an audio box to change balanced audio to unbalanced audio into the Atem Pro. I am considering other solutions for streaming as I have a pc with Wirecast. I could output from the Atem Streaming bridge into a converter to use for streaming. My email is Digitalblue@icloud.com
@marcossalinas2914
3 жыл бұрын
MARK BRAVERMAN thanks for the replies. I’ve tested the Pi4B, but tonight is the first time I’m using it as the source for my streaming encoder. www.fcps.edu/streamingmeeting2
@steveabdu8767
Жыл бұрын
Thanks!
@AlexPettitt
Жыл бұрын
Thanks for the Super Thanks Steve, much appreciated 🙌
@mrmikejones
Жыл бұрын
Do you use Birdog products for clients? Seems very technical for normal people
@marcossalinas2914
3 жыл бұрын
Very much enjoyed this video, Alex. Would you mind clarifying your statement about no limit to how many NDI sources? You mention a gigabit network, but I’ve seen other videos mention that a standard gigabit network is insufficient for more that one source. I believe their statement was that a ten-gigabit network would handle 15 HD NDI sources. It seemed to make sense. Curious what your observations have been regarding maximum number of NDI feeds on a gig network.
@AlexPettitt
3 жыл бұрын
Hey Marcos, so a standard Full NDI 1080p 30fps stream takes around 125mbps, so with that you can definitely have more than one NDI feed on a gigabit network. Obviously as you increase resolution to 4K or framerate to 60fps, it requires more data & bandwidth. 10Gbe networks is always preferable, but you can send multiple NDI streams across a 1gbe, just makes sure you leave yourself some headroom for all your other network traffic. Also, if youre worried about bandwidth, take a look at the NDI | HX protocol, which is a compressed version :) Hope this helps!
@marcossalinas2914
3 жыл бұрын
Alex Pettitt very helpful! I haven’t looked into NDI HX. I’ll bet you’ve got a video on it! Thanks!
@girirajrdx7277
Жыл бұрын
@@marcossalinas2914 It just like n ndi but uses AVC or HEVC for video compression and typically consumes 10 to 20 mbps bandwidth hence,more streams could be possible to travel
@BelDiasporaTV
3 жыл бұрын
My NDI tool can not find a source in obs other tools seems to work. I am trying to use ndi as virtual camera and virtual cable to send obs feed to restream from one computer. I am doing it on one computer, maybe it designed to work only for two computers? 🤔
@hiram9337
2 жыл бұрын
My church use 3 NDI PTZ cam and want to use ATEM mini Pro with it. we do use OBS. How is the easyest way to do this?
@QuicksilverSG
Жыл бұрын
Each 3G-SDI 1080p60 video stream requires up to 3 Gbps bandwidth. How can a 1Gbps ethernet network handle even ONE 3G video stream without degrading image quality?
@NadimALMallah
3 жыл бұрын
thanks a lot for great video . if i want to use a sound interface like goxlr from pc to u se it as my MAC OVER NDI , WHAT DEVICE I NEED FROM THE THREE U TALKED ABOUT
@robbokeys
2 жыл бұрын
I think the colour difference could be because hdmi is 4.4.4 vs N.D.I codec
@terencole1854
3 ай бұрын
Great vid!
@laughlounge
3 жыл бұрын
This was great!!! More please-:)
@ay1ism
3 жыл бұрын
What's the purpose of this Box?
@AgendaEurope2035
10 ай бұрын
Can I use a Birddog Play for outputting a NDI signal out from Vmix or Newbluefx Titler, e.g. lower thirds, and use it for input on an Atem Switcher as a downstream input? Thank you in advance for your advice.
@fpldecoder958
3 жыл бұрын
Great video 👍🏻
@demarboen
3 жыл бұрын
Camera Input : can we go direct from Netgear to Laptop, and then add NDI Input (Camera) in OBS?
@JulianDeLaSierra
2 жыл бұрын
Hi. We have lot of problems using Comms lite, even more trying to use the intercom. Which headphones you recomend to use, which FW is the most stable, etc please help. Thanks a lot
@catielakeradio
11 ай бұрын
Hi Alex! I gave up my Dante enabled TF3 mixer last year and now need another one to replace it. I produce a regular radio show remotely and want to use my workstation to get back into streaming, video conferences and my communications hobbies. Despite being trained in Dante I can't afford a TF1 so I considering switching to the cheaper NDI solution. What do you think and any thoughts on the Mackie DLZ Creator?
@BuriTechVids
9 ай бұрын
Do not ever set "NDI Video bandwidth" in encoder if you don't have to (for example when you need to save bandwidth of switcher PC). Because it's just an limitter. This is information from directly from BirdDog support. Once we had moiree on our camera's image from LED wall/screen and at the same time NDI Video Bandwidth was set to 160 Mbps (1080p50). That moiree caused so much traffic on the network, that it triggered that 160 Mbps video bandwidth limit and NDI switched that input to low resolution mode for a while.
@xriskod3
3 жыл бұрын
Nice video again Alex....I have a question, can you use it like the streambringe, what I want to say is if you plug an Ethernet cable from Atem into it will give you signal from hdmi???and if yes has a delay like streambringe?
@AlexPettitt
3 жыл бұрын
Thanks Christos, not the ATEM Mini does not support NDI out of its Ethernet port, so sadly not. Would love to see this feature added in the future though :)
@xriskod3
3 жыл бұрын
@@AlexPettitt thanks mate ...let’s hope it will give
@jeffschwisow
3 жыл бұрын
Hey Alex, really informative video! Mate, I was wondering if you know if you can transmit talley information (and other camera control info) from the ATEM Mini to a BMPCC via NDI. I know you did the video on HDMI extenders but they have the downside of being unidirectional. It strikes me that there is an opportunity to replace the extenders with encoder/decoders. Thanks - love your work!!
@pjcalder1990
3 жыл бұрын
Is it possible to set up macros in the ATEM software which will set the position of an NDI PTZ camera? Or would that have to be done through another solution like Companion where one button would send signals to both the ATEM and the camera?
@AlexPettitt
3 жыл бұрын
Good question! You wouldn’t be able to use ATEM Software as ATEM doesn’t support NDI, but if Birddog has an integration with companion, then yeah that should work. I’ll check :)
@pjcalder1990
3 жыл бұрын
Would make an awesome vid 😜
@moltenpros
3 жыл бұрын
Amazing job..love the content.
@BBBBennyandtheBricks
3 жыл бұрын
Can I use ATEM's Cat5 Streaming port as an NDI output?
@keithbennett5179
3 жыл бұрын
Great Video! I am already Subscribed.....
@AlexPettitt
3 жыл бұрын
Thanks Keith! I appreciate you support 👍
@eWhizz
Жыл бұрын
Those birddogs aren't cheap. For many situations a Mac mini (or several) would do the job.
@lawrencefloyd5411
3 жыл бұрын
Hello Alex. Alex, I'm running 3 cameras and a PC for slides into my atem mini pro. I then feed this into the atem streaming bridge and use the HDMI out of the bridge to go into a capture card to feed into OBS. Theres a few seconds of latency but not an issue if you're watching over KZitem or Facebook Live. How would NDI help this setup and how would I get all of these inputs into NDI and then out to my streaming bridge? And thanks for you informative videos.
@guitarguts666
3 жыл бұрын
Probably the splitter causing that gamma drop
@philippemoreau4795
3 жыл бұрын
thanks a lot for your channel. Concerning NDI, did you test through a VPN ?
@SportFlow
3 жыл бұрын
What's de difference between the flex and the mini. Is the flex a newer version? thanks!
@JuusoHoo
3 жыл бұрын
Hey sorry to be dumb but have to ask: can I use this application to get livevideo&audio from DJIPocket2 to Atem mini pro? Pocket2 has no usb/hdmi out.... THE Pocket2 gives a wifi/some weird rtmp-signal via wifi or Btooth and does not carry audio :(
@moontowerdrums
3 жыл бұрын
Anyone have a recommended HDMI splitter that plays nice with the Blackmagic ATEM minis? I’ve had issues with some.
@TTFN39
3 жыл бұрын
That's an interesting video and I can definitely see how useful it could be - especially for cameras that are a very long distance from the Mini Pro. But doesn't it add $1,000 per camera? 2 encoder/decoders @ $500 each.
@elephantgrass631
3 жыл бұрын
It would also make you think about getting cameras with SDI out instead at that price for encoder decoders. This is a great solution if you already have a bunch of quality cameras with clean HDMI outs that were older (like a stock pile of old GH4’s).
@paulvandeweerdt2073
3 жыл бұрын
I have a question: if I had 4 camera's attached to the same network - each using a BirdDog converter - is it thinkable that I could get their separate signals into the ATEM given the fact that I have only one network-cable going from the technicians room where the ATEM is stationed going to the room where the cam's are attached to a router and/or hub (e.g. by connecting this cable to a second hub and adding 4 ndi/hdmi converters)?
@studioalbert9398
3 жыл бұрын
Do you advice doing this with a 3 NDI cameras + obs as a switch in purpose of streaming a live event?
@chefinashirt
3 жыл бұрын
Hi Alex, really struggled with bandwidth trying to live stream a big six day project out via Vimeo around the world, using the ATEM mini pro. Would the Birdog converter sort this and can I still run three cameras and a laptop out through the ATEM. I live in the UK but the project goes out from the US again this April. HELP. Prepared to invest in what’s needed, but struggling as a relative beginner.
@AlexPettitt
3 жыл бұрын
Hey Julian, If it's bandwidth struggles you're having for sending out your live stream, then you're going to want to look into bonded internet. I have two videos about this coming out real soon! If you need help in the near future, you can always email me (my email is in my about section) and we can arrange a one to one session :)
@chefinashirt
3 жыл бұрын
@@AlexPettitt Thanks Alex. That’d be a good idea.
@fkmobile1
3 жыл бұрын
Is that NDI or NDI-HX? Also, is there a unit that do 2 or 4 channels with 2-4 HDMI outs (all in one unit)?
@AlexPettitt
3 жыл бұрын
That is full NDI 👍 I don’t know of a single unit that can do 2 or 4 channels of NDI... but now I want to find one!! :)
@philllane4260
3 жыл бұрын
Hi Fareed, just saw your question here and can confirm that we (BirdDog) have a 4K QUAD which is an SDI unit, currently no HDMI version though.
@fkmobile1
3 жыл бұрын
@@philllane4260 Thanks! An HDMI version (2 or 4 ports) would be a perfect companion to the ATEM MINI :). Also, support for NDI Full and HX would help with the many PTZ cameras that do not support Full NDI yet.
@philllane4260
3 жыл бұрын
@@fkmobile1 thanks for the feed back on this, I'll pass this onto the R&D team.
@alessiopallante
3 жыл бұрын
Hello Alex! I have a question....can I use the color page on Atem software with BMPC6K/4K through NDI ?
@FliesEyes
2 жыл бұрын
Gday Alex, certainly an interesting use case with NDI coders. Not sure if there is a better solution for my application. I am doing CAD software training and I am running 3 monitors. I have been looking for a workflow to take each of the feeds to the monitors from the GPU and put them into Atem MiniPro Iso, which I can then push to Camtasia to record. I am not having much luck yet. Thinking, tomorrow I will try using splitters. Any advice it that would work or the type of splitter I should be purchasing? Also my feed to Camtasia is not working yet as I am getting image flickering and only half an image, so that has me baffled. Just add some more complexity, my GPU is quadro card so it has DisplayPorts. Any advice would be most appreciated.
@HewittsMediaProduction
2 жыл бұрын
how about wireless
@hayankk
3 жыл бұрын
Hi, is there any need of enabling multicast or qos on switch or is that handled by the NDI device itself?
@KLRCAT
2 жыл бұрын
So here is what I want to accomplish with my Blackmagic ATEM mini pro (Let me know if its feasible) - I want to be able to record and stream my show while also being able to send the program feed to other screens/projectors in the venue. Only problem is, I'm using the HDMI out for Multiview. HDMI out - Multiview USB out - SSD for recording Ethernet out - Connect to network for streaming. Is there a way to capture the program output (that I'm streaming) from the ATEM mini pro and send it to an NDI to HDMI receiver while also being able to send to a platform like Castr.io?
@AlexPettitt
2 жыл бұрын
You'd need something like the ATEM Mini Extreme for this as it has 2x HDMI Outputs and 2x USB-C outputs, which would allow you to do what you want :) Hope this helps
@KLRCAT
2 жыл бұрын
@@AlexPettitt Cheers, I had a feeling that might be the answer. Maybe the solution to my problem is to abandon Multiview out and use HDMI splitters to send all four inputs to a Multiview device before going into the ATEM. Like the solutions people were using with the original ATEM mini (before Multiview was implemented) Like this - kzitem.info/news/bejne/yK-V1Yiig4egrWk&ab_channel=AaronParecki
@KLRCAT
2 жыл бұрын
@@AlexPettitt Or I could try the set up that "Yay, you did it" used, by sending the ethernet out to a streaming bridge which then went to both a LiveU streamer and distributed to monitors. kzitem.info/news/bejne/xGZjuIWrmnOJon4&ab_channel=Yay%2CYouDidIt%21
@oscarm4154
3 жыл бұрын
ecellent. More NDI please. Any other brands ? or is birddog dominating. Im not pleased with the birddog cameras
3 жыл бұрын
Hi, what kind of hdmi splitter did you use? Thanks.
@fearless_tr
3 жыл бұрын
Hey man i have a Just one question no one can answering it just simple question; There is any standalone hardware encoder available can streaming x264 slow profile to twitch tv ? i need it man pleaseeeeeeeeee
Пікірлер: 170