Thank you June for a brilliant video, my neckline turned out my best ever!
@maritkuivonen8650
5 жыл бұрын
Excellent instructions, clean clear and short! Thank you, June!
@weegie2818
2 ай бұрын
Enjoyed watching, straight forward. Thank you
@dianathefiberfan5116
Жыл бұрын
Thank you June. Great instruction video.
@JuneClark
Жыл бұрын
thanks
@nyperi13
3 жыл бұрын
WOW!!! That was SO helpful! THANK YOU VERY MUCH! 🥰
@nxubrant111
5 жыл бұрын
Brilliant as always!!!😁
@curlycords
6 жыл бұрын
Thank you June!!! this was extremely helpful. I appreciate your time and your generousity of sharing your skills.
@JuneClark
6 жыл бұрын
Thank you
@brendaeves3236
3 жыл бұрын
Super video! Great instructions, so helpful, thank you
@JuneClark
3 жыл бұрын
Thank you. Glad it helped
@christinechinchen7473
6 жыл бұрын
Thank you so much June you are a good teacher
@JuneClark
6 жыл бұрын
Thank you
@joytorjussen1573
5 жыл бұрын
Why didn't I watch this before I messed up a whole morning's knitting by not doing the neckline correctly? Thank you very much June for the clear, instructions.
@JuneClark
5 жыл бұрын
You are welcome!
@nataliap8591
4 жыл бұрын
hello from Poland :) I have a question why does the thread break off at the edges? what am I doing wrong?:(( I have a Brather machine.
@rrsw04089
4 жыл бұрын
Really helpful video June but what do you change on the carriage to stop it knitting the needles in hold
@JuneClark
4 жыл бұрын
Nothing, on a Brother you slide the N/H lever to H and needles in E do not knit
@knit1924
5 жыл бұрын
June, is this neck shaping for the back or the front of the neck of a sweater? Or for both? By the Way, thank you for a great video!
@JuneClark
5 жыл бұрын
Knitting Nana wherever you want to do it. I do a shallower one for back neck on jumpers and a similar one for cardigan necks
@suemcarthur105
4 жыл бұрын
this is such a basic comment but what settings are your levers on, my knitting keeps falling off the machine, can you show a shot of where the levers and buttons are please
@JuneClark
4 жыл бұрын
Sue McArthur not sure I understand what you mean? My N/H lever is on H for hold. No buttons are pressed as I am only knitting stocking stitch
@knit1924
5 жыл бұрын
Hi June, after the neck shaping, if I want to do a shoulder shaping, do I knit straight up to the place to do a short row shoulder shaping, then take off on waste yarn? Is that doable?
@JuneClark
5 жыл бұрын
Knitting Nana yes! When doing a shallower back neck, you would probably start the shoulder short rowing before the neck
@knit1924
5 жыл бұрын
@@JuneClark thanks again, June. What would we do without you!! You're a gem!
@knit1924
5 жыл бұрын
@@JuneClark okay, so then at some point, I would start short rowing the shoulder then at some point the shallow back neck shaping starts and they would both end at the shoulder's end. I get it!
@countkostaki
2 жыл бұрын
I have tried this method several times on scrap and on a couple of garments and each time it doesn't seem to work - because the patterns say decrease one stitch every 2 rows followed by every 3 rows, cosequently I end up with holes around the neck edge. If I followed your method by decreasing the same amount of stiches every row as opposed to alternate rows (and therefore end up with the same amount of decreased stitches), would this alter the shape of the neck?
@JuneClark
2 жыл бұрын
Very slightly. You could do on alternate rows until stitches are decreased and then straight. You can’t use holding method if decreasing is more than alternate. I tend to ignore the pattern when I come to neck shaping
@knit1924
8 ай бұрын
Hi June, I have friend that is using a Brother 965i. She is doing one side of neckline " in pattern" and she cannot recall how to do the opposite side, now? Can you direct me to a video of the complete proecess?
@JuneClark
8 ай бұрын
Please see the back of the manual. Note pattern row, make sure all stitches are in hooks and push back to B. Lock on pattern row, part button in, knit selection row. Unlock pattern, insert yarn and set carriage for pattern. Release part buttons
@knit1924
5 жыл бұрын
Hi again, June, when you ignore a pattern that says, decrease every alt row, three times, do you still do every row ? How does that figure in to the number of needles decreased and number of rows knitted? If I do every row instead of every alt row, I would end with more needles decreased than the pattern calls for and more rows knitted. How do I compensate for that? Sorry for the question, I just can't get it all figured out in my head.
@JuneClark
5 жыл бұрын
When you have reached the number required to be decreased, just knit straight to the required number of rows. You can do it every other row if you want and it will give a narrower neckline.
@knit1924
5 жыл бұрын
@@JuneClark thank you so much for the help I so desperately needed!
@carmelgahan3605
2 жыл бұрын
June, I can do the right side well but when I get to do the left, once I put the needles into upper working working and rethread the yarn, and take carriage across from the left, it casts off those needles - the ones in hold stay as they should. Any thoughts on what I am doing wrong please?
@JuneClark
2 жыл бұрын
Needles need to be in B position with stitches in the hooks. If you are selecting a pattern row, then push in both part buttons
@carmelgahan3605
2 жыл бұрын
@@JuneClark Thanks June… another question therefore… if the needles have been in Hold, the stitch is now behind the latch. How do you get it to be in the hook? Is there a manual step I am missing? Sorry to be asking such basic questions…..I could not see the answer in the manual. Again, I value all your advice here and on the FB group.
@JuneClark
2 жыл бұрын
@@carmelgahan3605 use the latch tool and push the needle back and pick up the stitch, as you would to transfer a stitch
@carmelgahan3605
2 жыл бұрын
@@JuneClark Thanks again, that makes sense. Such tiny instruction points make all the difference to new machine knitters. I hope it helps others too.
Пікірлер: 38