The king of hammershots, Tripp Miller of Radioactive Designs, might be able to give you some pointers. I believe he's said that removing the AR can be a mixed bag, because the plunger tube "floats" to take pressure off the rotating cylinder. Without the AR, air can escape before the plunger tube gets pushed back against the cylinder to make a good seal. You may benefit from beefing up the cylinder seal with mega dart foam. Good mod guide!
@maritimefoam
Жыл бұрын
This is good info. Springers in general are not my strongest point and maybe. I should also revisit this to see if I can get a better seal. I know there is potentially way more power here to be had looking back at this in the past as now me haha.
@xfoxgames
2 жыл бұрын
Im liking those mods, it looks really good!
@maritimefoam
2 жыл бұрын
Threw everything but the kitchen sink at it haha. Performance is a bit under what I had hoped, but it is improved and a child can still operate it, which around here is nice ha.
@jonathanrichard582
2 жыл бұрын
Your muzzle is so nice i wish it was made like that in the first place. I found a guy who made 3d short muzzle kit and drum but its more expensive than the stock gun loool
@maritimefoam
2 жыл бұрын
Ah, this is where printing is nice. Someone made that n-strike lug and then I used an old retaliator part and lots of glue to change the barrel over :)
@josephgrant4636
Жыл бұрын
As a friendly update to abyone trying this mod, if you line up the shell cutting justbright, you actually keep the retaining post holding down the part the L shaped printed piece is doing. A dan of super glue in the cylinder retention pin housing and you dont need the L piece at all. Furthurmore for these without printers, a scrap puece of nerf barrel material should work for the curved part. Happy modding and shout out to Maritime Foam for such an in depth detailed guide. Much love!
@maritimefoam
Жыл бұрын
All good advice! I’ll try that if I do it again!
@josephgrant4636
Жыл бұрын
@maritimefoam same here! And that's all the excuse we need right? 2 hand cannons are better than 1
@nirojacinto1864
2 жыл бұрын
these are the things we want hasbro! not some garbages!
@TheVinitsaini
Жыл бұрын
Thanks for the video, I was able to restore my hammershot referring your video. Fitting trigger spring was tricky.
@maritimefoam
Жыл бұрын
Glad it helped!
@lstudios3237
2 жыл бұрын
OMG i so will need this, i wanted to mod the 6-SH this will be a life saver :D
@maritimefoam
2 жыл бұрын
Awesome :)
@Sushiboi-ox2mj
Ай бұрын
fr just taking the barrel was such a PAIN i ended up sanding down the barrel part so i could put the barrel on and off
@Sushiboi-ox2mj
Ай бұрын
when i went to mod my gun i found random grass in there lol also you shountive used a screw driver to remove all six of the dart post and saved me alot of time
@maritimefoam
Ай бұрын
Can't really remember what I did. I feel like I just dremelled them out?
@twoboardbroads
2 жыл бұрын
Thanks for the shoutout! Much appreciated. 💁🏻♀️😄
@beansdudes
2 жыл бұрын
this amazing im sure that im picking this mod up
@Hamstersandw1ch
Жыл бұрын
These are great ideas for mods, im going to attempt to do these on mine
@maritimefoam
Жыл бұрын
ZDL on KZitem is pretty brilliant, ideas from there mostly for the loading!
@Jalopymedia
Жыл бұрын
im gonna give it a go. looks cool. maybe get a 9 round cylinder for it
@maritimefoam
Жыл бұрын
Sweet! Do it! Good luck!
@Acemans
7 ай бұрын
hey been new to the nerf stuff and wanted to know where to get springs that are the right size?
@pexavex7295
Жыл бұрын
Could I make it theoretically rear feed full length darts?
@maritimefoam
Жыл бұрын
Sure!
@pexavex7295
Жыл бұрын
@@maritimefoamthank you!
@randymiller8718
19 күн бұрын
Your videos explain this like you’ve done this before. Imagine, the minor details your blaze through. I can’t tell where all the springs go because I had one pop out. I don’t even see how the trigger spring goes in and you showed us, but it didn’t really explain it very well. Imagine it’s not as obvious as it is to you. It’s my first time and I’m so lost
@maritimefoam
17 күн бұрын
Oddly enough when I filmed this it probably was my first time, but, I am familiar with other blasters. This is an old video, I would like to think I do better later on, so I totally get it. I suggest lots of pausing, and seeing if Captain Xavier did a mod guide for this, he is better than me haha.
@randymiller8718
17 күн бұрын
@@maritimefoam no worries. I had to order a new nerf gun. I couldn’t find what peices went where by the time it all came loose. My second go round should go much better as well. First time is always rough. But I do appreciate the videos. I’m making this for work. The office gets a bit rowdy.
@natashasutherlin8293
2 жыл бұрын
My son took his apart to take the barrel off the and in the process the rest feel apart, do you have a reassembly video? I obviously know nothing about nerf guns or how guns work..
@maritimefoam
2 жыл бұрын
Hmmm, I put it back together at the end of this video I believe!
@jakeshipe
2 жыл бұрын
My sons Fortnite revolver broke. Do you know where I could get a hold of a schematic diagram for the 6-SH to put it back together?
@maritimefoam
2 жыл бұрын
Hmmm, Captain Xavier might have an assembly guide maybe? Otherwise send me a pic if there are any parts you aren’t sure where they go! Just send it via Instagram (@maritimefoam)
@jakeshipe
2 жыл бұрын
I actually figured it out by continually pausing your videos. Is there a place in general where there are detailed Nerf gun schematics in case I need to fix or rebuild something? Who is or how do I contact Captain Xavier as you suggested?
@maritimefoam
2 жыл бұрын
@@jakeshipe oh good! It’s kind of all over the place. Feel free to ask me, if I have a blaster I’m usually happy to crack it open, for Captain Xavier I was more saying having a peek in case he already has one :)
@allencarey7336
Жыл бұрын
I cut that piece out before I actually saw it done by anyone else to load short darts from the back I just left it open and it works great! Haven't removed the AR yet but I want a little more performance so I think I might. Btw I got that new adventure force(buzz bee) 6 shooter that's out now that looks like the reflex 6 and removed the AR that thing shoots almost 90fps now most performance I've ever gotten from removing an AR it went from 70-75 to 85-90 kinda crazy!
@maritimefoam
Жыл бұрын
That's cool! I have that blaster now I should try that too!
@admiralquack2797
Жыл бұрын
Would you sell these pre-modded? I would buy
@maritimefoam
11 ай бұрын
Time is my enemy unfortunately :(
@arubaladebi3922
2 жыл бұрын
wow just wow
@ТагирДаудов-с3ы
4 ай бұрын
Друг! Брат! Ты крутой! 😁👍👍👍 Спасибо тебе большое! Без тебя бы я никогда не собрал этот 🤬🤬🤬 бластер... 😂
@BKG35
Жыл бұрын
Please make a tutorial on how to reassemble it I opened mine up and it fell on ground now i need to reassemble mine
@maritimefoam
Жыл бұрын
You should be able to see from the internals! Go slow! Check out photos of the internals as well online!
@suckstosucks3255
2 жыл бұрын
can you mod the ecs 10? removing the carry handle?
@maritimefoam
2 жыл бұрын
That’s actually one I don’t have! I’ve seen a couple come up, but seemed expensive - but still looking!
@Pozibly0706
Жыл бұрын
Is it possible to buy one already modded?
@maritimefoam
Жыл бұрын
I’d sell this one but I didn’t do the cleanest job on cuts haha
@rymanjones3
Жыл бұрын
can the rear-loading port be put on the right side?
@maritimefoam
Жыл бұрын
As I recall all the mechanisms are on the other side of the shell so no, it unfortunately doesn’t have the shell room to be set up easily for a lefty… unless I’m wrong :) going off memory here
@nirojacinto1864
2 жыл бұрын
yes sur!
@fznyahoo
Жыл бұрын
Hey how to fix Fortnite 6-sh cylinder? Mine doesn't spin anymore when I prime it :(
@maritimefoam
Жыл бұрын
Have a look carefully at the reassembly, there is an arm that fits into some gears to turn it: also there is a very specific groove the cylinder fits into.
@fznyahoo
Жыл бұрын
@@maritimefoam thank you it spins now but where do I put the spring with 2 holes? check my short if you don't understand
@Jhonnyboymarston
Жыл бұрын
What does a air restrict do?
@maritimefoam
Жыл бұрын
Keeps the plunger head from slamming when there is no dart loaded. Which can lead to cracked pieces. Air restrictor is a spring loaded piece that slowly lets the air out when it’s fired empty, cushioning the impact.
@Jhonnyboymarston
Жыл бұрын
@@maritimefoam thanks
@asillyscallywag
Жыл бұрын
Where can I get the spring?
@maritimefoam
Жыл бұрын
Out of Darts has em
@asillyscallywag
Жыл бұрын
@@maritimefoam thanks
@jonathanrichard582
2 жыл бұрын
Where did you get the spring
@maritimefoam
2 жыл бұрын
Out of darts. Pretty sure I say in the video somewhere which one it was. The same one as the hammershot. A 5KG
@jonathanrichard582
2 жыл бұрын
@@maritimefoam i tougth you could buy it seperatly
@maritimefoam
2 жыл бұрын
@@jonathanrichard582 you can. I bought the spring from OOD
@FrankNelson1310
2 жыл бұрын
Where do I buy it I have the normal one
@maritimefoam
2 жыл бұрын
Buy what? Springs? Parts? :) the blaster? :)
@FrankNelson1310
2 жыл бұрын
@@maritimefoam the gun
@FrankNelson1310
2 жыл бұрын
Mod
@maritimefoam
2 жыл бұрын
@@FrankNelson1310 you can buy a new spring for this blaster from OutofDarts.con so you can mod it :)
Пікірлер: 69